Anyone one have a tar of the /etc/wifi dir from a 2.18 firmeware? I want to try it with an internal load of Uruk.
you're welcome: /etc/wifi from stock 2.1.08
Related
Is it possible for someone to post the newest ROM upgrade with the extracted renamed nbh file? I don't readily have access to a computer, will be flashing from the micr sd card. Thanks!
Are you sure? If you flash a stock ROM via SD it will overwrite the SPL.. just fyi.
Yes...
Yes, my current ROM is giving me the fits, so thought for now, a stock version would have to suffice. Coupled with no computer access, my last choice seems to flash the latest TMOUS LEOIMG.nbh from the micro-sd card. Having trouble locating such a file...
Try downloading PocketRAR or even most file explorers (resco and I think TC) can extract zips.. then just extract the nbh and rename it leoimg.nbh. I would upload it for you but don't have the time right now.. sorry :/
Thanks...
I have tried installing PocketRAR to no avail. Resco file explorer can't seem to extract the necessary file(s). If there is someone out there that can provide some information on how to perform such action, or even post the correct LEOIMG.nbh file, it would be greatly appreciated.
Thank you!
I dont have access to a linux box and I think in order to flash the latest JMA firmware from samfirmware i need to extract the rfs files in order to load them up via odin...if im completely off please disregard or point me to the correct path..
if any helpful souls out there that wouldnt mind extracting the files and uploading them here?
thanks
Im just a noob trying to flash the latest JMA firmware on my JM6 tab
thanks again..
EDIT - Thank you all for explaining it:
For anyone else presented with the same issue; use the zipped JMA file in odin in the PDA box and the pit file located at the bottom of the samfirm page when flashing the latest JMA firmware.
Eltahur said:
I dont have access to a linux box and I think in order to flash the latest JMA firmware from samfirmware i need to extract the rfs files in order to load them up via odin...if im completely off please disregard or point me to the correct path..
if any helpful souls out there that wouldnt mind extracting the files and uploading them here?
thanks
Im just a noob trying to flash the latest JMA firmware on my JM6 tab
thanks again..
Click to expand...
Click to collapse
Extract them yourself by opening the file with 7Zip or WinZip. They're just archives.
Also - Should be in the General section.
knightnz said:
Extract them yourself by opening the file with 7Zip or WinZip. They're just archives.
Also - Should be in the General section.
Click to expand...
Click to collapse
thanks for the tips. I just installed both winzip and 7zip and could not extract the factory.rfs file with either.....
im guessing I have to extract the factory.rfs file and zip as a tar file for odin right?
Eltahur said:
thanks for the tips. I just installed both winzip and 7zip and could not extract the factory.rfs file with either.....
im guessing I have to extract the factory.rfs file and zip as a tar file for odin right?
Click to expand...
Click to collapse
The file you download is a zip file. Unzip it. There should be a tar file in there, tar is an archive format (similar to the way zip is, only it's uncompressed), so use 7zip or other unarchiving software to untar the file. There will be all of the JMA files including the RFS images contained in the tar file.
maniac3389 said:
The file you download is a zip file. Unzip it. There should be a tar file in there, tar is an archive format (similar to the way zip is, only it's uncompressed), so use 7zip or other unarchiving software to untar the file. There will be all of the JMA files including the RFS images contained in the tar file.
Click to expand...
Click to collapse
I see, so i downloaded a ziped file from samfirmware with the JMA firmware, unziped it down and got the pit file but there were no tar files in there for me to use in odin under the PDA box.
when flashing JMA what file do i put in PDA box? i pressume thats the only file i will use besides the pit file given that i dont want to replace the modem (phone) file...
I'm sorry if this is not making any sense
Eltahur said:
I see, so i downloaded a ziped file from samfirmware with the JMA firmware, unziped it down and got the pit file but there were no tar files in there for me to use in odin under the PDA box.
when flashing JMA what file do i put in PDA box? i pressume thats the only file i will use besides the pit file given that i dont want to replace the modem (phone) file...
I'm sorry if this is not making any sense
Click to expand...
Click to collapse
Go find the thread here that has the JMA firmware, that's where I got mine from
Eltahur said:
I see, so i downloaded a ziped file from samfirmware with the JMA firmware, unziped it down and got the pit file but there were no tar files in there for me to use in odin under the PDA box.
when flashing JMA what file do i put in PDA box? i pressume thats the only file i will use besides the pit file given that i dont want to replace the modem (phone) file...
I'm sorry if this is not making any sense
Click to expand...
Click to collapse
Use the JMA file here on XDA. Extra JMA.tar. Select that file ALONE as PDA. No repartition, PIT, Phone or CSC. It'll update PDA, Phone and CSC automatically.
If it doesn't reboot on its own after flash is complete, reboot into recovery.
You should be upgrading to JMA from JM6.
If you still need to extract/unpackage RFS->
Reffer to my guide here
Cheers
I packaged up a mix of the stock JMI PDA, JMG CSC and JK5 modem for my own Tab and thought I'd post a download link in case anyone would like to try it. The JMI PDA is stock, I haven't altered it at all. The JMG CSC has carrier data for UK carriers amongst others (the CSC that comes with JMI is only Russia). The JK5 modem is the stock one for UK supplied Tabs so (theoretically) should be best suited for UK mobile providers. The ROM can be rooted with SuperOneClick and it's nice and fast. The only issue is that you have to copy and paste a folder called T9DB into /system after the flash otherwise the Samsung keypad doesn't work properly. I've attached a zipped up copy of the folder here, just unzip it, copy it to your SD card and use something like Root Explorer to copy in into /system. Samsung have included the T9DB folder in their CSC file instead of the factoryfs file this time (why???).
Here's the link to download the ROM package. Note that it does not contain bootloaders! I have only included factoryfs.rfs, param.lfs, zimage, cache.rfs and modem.bin in the package. When I flashed it onto my Tab it didn't overwrite any of my settings and all my applications were still present and working, it just removes Root and resets your home screen. http://www.multiupload.com/5L68OTH9QY
Flash as PDA with Odin 1.7. Select no PIT file and do not re-partition.
bdl1969 said:
The only issue is that you have to copy and paste a folder called T9DB into /system after the flash otherwise the Samsung keypad doesn't work properly.
Click to expand...
Click to collapse
Hi ! Good tip.
Is this the T9 database files from the JMI CSC ?
As listed here:
http://forum.xda-developers.com/showpost.php?p=11098920&postcount=11
htc wildfire vodafone Spain stucks on white screen. it has the latest rom in it.
i went to shipedroms.com & downloaded the latest version vodafone spain from there but turns up to be a non- *.exe file. it's *.zip OTA_Buzz_Froyo_Vodafone_SPA_2.24.164.1-1.36.164.1_release_161303bpvlsx8vcjr4fbkj.zip
i extracted the file but i don't have any idea on how to flash it.
any help would appreciated guys
regards
Plz if anyone could provide the *.exe would be great
Regards
Did you try renaming it to .exe?
kevin2516 said:
Did you try renaming it to .exe?
Click to expand...
Click to collapse
Yes, it s not a .exe file at all
Anyone has this file as .exe?
plz i need this rom as .exe file or solution to this problem.
Plz it s so urgent. I need to solve this problem
try renaming the file to update.zip and copy it to sdcard.
then goto recovery and choose update from zip
warning:you may loose root and become stock
or
use the android kitchen to get a correct signed flash-able zip
Can anybody provide me with the original sysytemui file found in system/apps as I have replaced with the modified without the backup and it is continuosly showing the message that sysui has stopped
Plz
If nobody provides the single systemui.apk you can try to extract it from original firmware by using [WINDOWS][TOOL]Android ICS JB EXT4 ImageFile Unpacker!!! http://forum.xda-developers.com/showthread.php?t=1921399
Make a copy from your extracted i9500MEA firmware and rename .tar.md5 into zip.
Then extract system.img.ext4 an unpack with above-mentioned tool.
AiMwasNeD said:
If nobody provides the single systemui.apk you can try to extract it from original firmware by using [WINDOWS][TOOL]Android ICS JB EXT4 ImageFile Unpacker!!! http://forum.xda-developers.com/showthread.php?t=1921399
Make a copy from your extracted i9500MEA firmware and rename .tar.md5 into zip.
Then extract system.img.ext4 an unpack with above-mentioned tool.
Click to expand...
Click to collapse
Thanks but it would be so easy if somebody kind enough to provide me with the default file
Thanks downloaded the whole new firmware