[Q] HTC HD2 now hangs on 02 Welcome Screen - HD2 Android Q&A, Help & Troubleshooting and Genera

Hi
I seem to have killed off my HTC HD2.
I followed a posted instructions link on here
Phone has
2.15.50.14 Radio installed
HARDSPL 2.08 installed
I then went and tried to use MAGLDR. This went through but on reboot phone stalls at the Blue 02 weclome screen.
Tried many reloads of all the above but it still hangs. Any advice.
The only issue I think I have is that its a 320MB version as it was one of the first to the UK.

Hi
Just to let you know if you get this issue I solved it. Used Task29 and rebuilt phone up from there. Runnimg WM7 but not going to keep it as I'm finding it very boring.

dpf2002 said:
Hi
Just to let you know if you get this issue I solved it. Used Task29 and rebuilt phone up from there. Runnimg WM7 but not going to keep it as I'm finding it very boring.
Click to expand...
Click to collapse
Do you have a 320mb pre-release version?
Sent from my HD2 Droid HD using XDA App

you are only guessing you have a 320meg version, you have the proper eu version not a test unit, i got mine from o2 on the day it arrived

Hi
Not sure now. In WM7 in phone about it now states
Total Storage 158.29MB
Avaailable Storage 61.96 MB
This is causing me a real issue as it doesn't see my SD Card nor can I find any settings to use it.

becayse wp7 takes up the internal memory, and not all sd cards are compatable with wp7

Format your card with Panasonic SD Formatter with....
Format: FULL
Erase: ON
Size Adjustment: ON
Then put SD card into phone and re-flash WP7 and it should work properly and you see all your free space. If you view the card via PC it will say you have 200MB free space as WP7 partitions your card, The 200MB is used by system and the other partition is your storage space. Remember not to power on phone without SD card though.
If you still dont get full space its likley that your card is not compatible so you will need to use another.

Related

NAND DFT - Sense and free space issues

Firstly, amazing day, finally been able to get rid of winmo and get android into my NAND.
Sadly, i keep running into free space issues which is a bit frustrating. Im sure it might be something i am doing (or not doing), but was wondering if i am alone. As far as details, im running UK HD2, with DFT - SENSE rom flashed into my NAND and radio 2.15. I had no problems with the flash process and the phone generally works well.
I have apps2sd running and it says there are no apps that can be moved to the SD so i have everything where it should be. My SD is listed as 6.1gb free but internal memory is 115in use and about 38mb free. I cant even get copilot to install as it just says there is no space left (although i was running the .apk from the sd to install on the sd).
Could this be because i was previously using the sd card for android? Anyone else having these issues?
Thanks.
geekyhawkes said:
Firstly, amazing day, finally been able to get rid of winmo and get android into my NAND.
Sadly, i keep running into free space issues which is a bit frustrating. Im sure it might be something i am doing (or not doing), but was wondering if i am alone. As far as details, im running UK HD2, with DFT - SENSE rom flashed into my NAND and radio 2.15. I had no problems with the flash process and the phone generally works well.
I have apps2sd running and it says there are no apps that can be moved to the SD so i have everything where it should be. My SD is listed as 6.1gb free but internal memory is 115in use and about 38mb free. I cant even get copilot to install as it just says there is no space left (although i was running the .apk from the sd to install on the sd).
Could this be because i was previously using the sd card for android? Anyone else having these issues?
Thanks.
Click to expand...
Click to collapse
Same problem with me I only have 35 mb free internal memory ,own using cotulla nand desire Rom
Sent from my HTC HD2 using XDA App
try the desire hd version, it has a bit more space ..
the owner of a hd2 (us) with 1024mb have no problems with that ..
Hi
Did you try titanium backup to move apps from nand to SD, it should be better to give it a try...
Using nexushd2 I have 216 MB free space.
Sent from my Nexus One using XDA App
Tmo US W/Desire HD 538mb Free!
frankinstine said:
Tmo US W/Desire HD 538mb Free!
Click to expand...
Click to collapse
TMOUS HD2 Rocks
I just get free space only 99 mb on my hd2, i want to know why each device don't be got free space as same as ones.
My hd2 runs in Colluta's desire nand rom.
Sent from my HTC HD2 using XDA App
This is not a problem with you guys, it's just with the 512 limit of our devices.
Be patient and someone /Cotulla/ will fix it so that we can install to SD card.
BTW
I just downloaded move2sd and it works just fine. Now my apps go to the sd and i've moved all possible apps to sd.
I am left with 82 mb which should be enough for txt and logs...
Im glad im not by myself with this. I guess the solution will come when the devs get chance to get ext4 up and running on our sd cards as data.img, that way the problem goes away. apps2sd/titanium etc are all fine, but if you have a lot of apps then you will always be in the situation i am of bouncing off the warning of low space.
The only problem is now the low space...
Hope the devs can add a partition from the SD that functions as the internal memory.
And people with 1024leo's should stfu. It's like saying to a blind person.. hah that's weird I can see perfectly fine.
pr0x2 said:
The only problem is now the low space...
Hope the devs can add a partition from the SD that functions as the internal memory.
And people with 1024leo's should stfu. It's like saying to a blind person.. hah that's weird I can see perfectly fine.
Click to expand...
Click to collapse
Totally agree with the ignorant TMOUS owners saying they have no problems. I used to put a 4gb data.img in with my builds to make sure I had plenty of space. Still early days so lets wait for TMOUS users to come forward saying they have used up all their memory.
Putting that aside, the same problem happens with most other devices. I suppose using Android from SD card we had the luxury of choosing how big data.img to have. Now we are in the same boat as other Android handsets with the exception we cant go into recovery mode. If we could go into recovery mode then we could partition the SD card into two partitions. One for sd card usage like music, pictures etc and the other partition as ext3 to expand the phone memory onto the sd card.
If Cotulla or the DFT enables us to use our device in recovery mode, maybe they should only make it for HD2 Europe devices, seeing as TMOUS owners are all saying they have plenty of memory.
Google Earth and Flash Player are killing me.
They still hold much space after moving to sd.
Looking forward to app2ext.
nokn956120 said:
Totally agree with the ignorant TMOUS owners saying they have no problems. I used to put a 4gb data.img in with my builds to make sure I had plenty of space. Still early days so lets wait for TMOUS users to come forward saying they have used up all their memory.
Putting that aside, the same problem happens with most other devices. I suppose using Android from SD card we had the luxury of choosing how big data.img to have. Now we are in the same boat as other Android handsets with the exception we cant go into recovery mode. If we could go into recovery mode then we could partition the SD card into two partitions. One for sd card usage like music, pictures etc and the other partition as ext3 to expand the phone memory onto the sd card.
If Cotulla or the DFT enables us to use our device in recovery mode, maybe they should only make it for HD2 Europe devices, seeing as TMOUS owners are all saying they have plenty of memory.
Click to expand...
Click to collapse
Sorry man, not tring to be ignorant, I do love my TMo HD2. Ido agree with you on the ext3. I have my N1 w/a2sd and its awesome, no need to worry about space.I had about 95+ apps at one time and still had 150mb free of internal. Im guessing once we get a recovery img. we can then get the ext3 and a2sd working as it should. I have clockworks recovery on my N1 and works awsome. You can Backup any part of your rom even your ext3. Also Amon_RA's recovery is good too cause it has PSfreedom implemented, for those looking at PSFreedom Modds

Remove WP7 on Hd2...Please desperate.

Hi
I have searched around the forum without any luck on how to remove the windows phone 7 from my uncle's HD2. How can reflash it to the stock rom, which windows 6.5 because activating 7 on the phone is a bit hard and i m not really getting how to do. So I'll just get it back to stock rom and wait for some thing more stable and easier.
Please help me, my uncle's contacts are on this phone, and he cant get it back to normal.
if u didnt backup the phone contacts i guess they are gone because after a flash everything gets lost...u can flash back the stock winmo rom...hold volume down button and start the phone wait till u see the three colored screen...plug in pc till u see usb writing instead of serial...then start flash stock rom from pc...but nothing from ur data will be there anymore...so if u still have the contacts on phone make a backup before u flash
Man. You have two ways.. even to flash nand android or returning back to wm6.5 to return to wm 6.5 u first turn off ur fone, press volume down and power botton to go to the multi color screen .. and then flash ur favorate wm 6.5 rom.. and sorry to tell u that the contacts are alreqdy rlearased if they were on wm 6,5 ..
You can reflash Windows Mobile 6.5 by holding down the volume- button as you power on the phone. Then just flash a stock ROM through the bootloader like normal.
As for his contacts being on the phone, if they were in Windows Phone 7 you can back them up using a Gmail account, and if they were on Windows Mobile 6.5, then I'm sad to say that they have been erased.
htc hd2 does not show sd card
Thanks guys i have revereted back to win 6.5 on my htc hd2 but i have problem with sd card my phone dose not show any card is installed
You have to format the SD card.
I don't know if you can do it in WinMo (probably you can)
Otherwise you'll have to do it on your pc.
akhil3 said:
Thanks guys i have revereted back to win 6.5 on my htc hd2 but i have problem with sd card my phone dose not show any card is installed
Click to expand...
Click to collapse
Try formatting your memory card.
akhil3 said:
Thanks guys i have revereted back to win 6.5 on my htc hd2 but i have problem with sd card my phone dose not show any card is installed
Click to expand...
Click to collapse
I formatted the SD card back to FAT32 in a digital camera.
You can-
You can format the SD card on Win Mo 6.5
Go to tools/format SD card.
Format it to whatever you need.
depends whether Wm6.5 can recognize this "formatted" partition created by WM7
if unable to, you probably need some tools or software
or use a digital camera or for me, SD card reader etc
jcsy said:
depends whether Wm6.5 can recognize this "formatted" partition created by WM7
if unable to, you probably need some tools or software
or use a digital camera or for me, SD card reader etc
Click to expand...
Click to collapse
You can use Android. It works!
Go online and google "free partition manager".
Or look around the various threads, theres links to partition and formatting software in the wp7 threads because of this exact reason...
Cheers...
To get your micro sd card formatted back to its original size just use the tool on *THIS* website and when formatting go into the options and change FORMAT SIZE ADJUSTMENT to 'ON' so it detects the hidden partition.
Mark.
To format SD cards
Normally i just flash clock work mod recovery, and do a format from there, its pretty easy and i can set up my SD card for Ext2 while at it
hi, I assume when we flash stock rom during bootloader "usb" after we installed wp7, things like hspl, magldr , radio will be removed as well.
is there anyway that we can keep wp7 , and leave android sd build in another sd card ? So when we want to build android, we simply just swap the wp7 sd card with the android build sd card. is there anything we need to do to achieve this ?
pool7979 said:
hi, I assume when we flash stock rom during bootloader "usb" after we installed wp7, things like hspl, magldr , radio will be removed as well.
is there anyway that we can keep wp7 , and leave android sd build in another sd card ? So when we want to build android, we simply just swap the wp7 sd card with the android build sd card. is there anything we need to do to achieve this ?
Click to expand...
Click to collapse
If you flash a stock WM6.5 rom via bootloader usb mode then the only thing that is lost is Magldr and your previous rom. HardSPL and your Radio can only be overwritten by flashing a stock WM6.5 rom via microsd card method.
When you are using WP7 you CAN NOT hotswap microsd cards or your new card and the previous card you took out will not be recognized by WP7 anymore. I have seen some posts of people saying you can load Android via sd card while using WP7 but I have not done this and cannot verify its validity.
Mark.
More trouble...
I went back to 6.5 ...And my phone reports only 180 Mb of memory instead 512 !!! I tried task29, flashing Stock rom, Custom roms, everything... And it still not going over 200MB of total memory, I can feel the phone lagging!
So, f this SD-card formatting issue, what about the more serious problem of downsizing HD2's memory in half after WP7!!!
Anyone, please HEEEELP!!!
superpeca said:
I went back to 6.5 ...And my phone reports only 180 Mb of memory instead 512 !!! I tried task29, flashing Stock rom, Custom roms, everything... And it still not going over 200MB of total memory, I can feel the phone lagging!
So, f this SD-card formatting issue, what about the more serious problem of downsizing HD2's memory in half after WP7!!!
Anyone, please HEEEELP!!!
Click to expand...
Click to collapse
Is that internal memory, storage memory? What is it giving for total, used and free?
Can you take a screenshot and post it?
If your phone only registered a total of 180Mb then its very doubtful that the stock rom would have flashed so im sure the memory is still there.. A screenshot of your memory screen would be very useful.
Mark.
mskip said:
If you flash a stock WM6.5 rom via bootloader usb mode then the only thing that is lost is Magldr and your previous rom. HardSPL and your Radio can only be overwritten by flashing a stock WM6.5 rom via microsd card method.
When you are using WP7 you CAN NOT hotswap microsd cards or your new card and the previous card you took out will not be recognized by WP7 anymore. I have seen some posts of people saying you can load Android via sd card while using WP7 but I have not done this and cannot verify its validity.
Mark.
Click to expand...
Click to collapse
i see. thanks for ur advice. just curious , when we install our wp7, is our wm6.5 still in phone ? cos my energy start up screen is still there . or did i missed one step in front to do a task 29 ?
if i want to go back to my sd android and wm6.5, the step is just flash a wm6.5 (ex: energy rom) rom over right ? or i have to do a task 29 first ?
mskip said:
Is that internal memory, storage memory? What is it giving for total, used and free?
Can you take a screenshot and post it?
If your phone only registered a total of 180Mb then its very doubtful that the stock rom would have flashed so im sure the memory is still there.. A screenshot of your memory screen would be very useful.
Mark.
Click to expand...
Click to collapse
mskip, here is what WM 6.5 reports after I:
- removed the SD card (formatted by WP7, did use the sdformatter tool to revert back to fat32, thank for that tip which you posted on some other thread
- went into bootloader
- did the task29
- flashed the 3.14 stock rom (comes with .51 radio)
DEVICE:
Total storage : 180.98 MB
Used storage: 53.71 MB
Free storage: 127.27
Total program: 336.93 MB
Used program: 136.41 MB
Free program 200.53 MB
I tried some other ROMs, like CleanEx Core V12 which report more memory, but not as nearly as they should (its a 576 mb rom and I flashed a 50.14 radio before the ROM) and it looks like this:
DEVICE:
Total storage: 283.95 MB
Used storage: 16.36 MB ?!??!
Free storage: 267.58 MB
Total program: 474.00 MB
Used program 275.59 MB
Free program 198.24

[Q] Why wont my HD2 Accept ANYTHING?

Hi,
I have been on this forum for the past 2-3 days trying to get android on my gf's HD2 and it just wont have it.
I have tried MCCM's HD v4 Desire one
I have tried Froyo 1.5
I have tried DL Desire Series, both SD and MAGLAR.
The ones where you click CLRCAD.exe then haret.exe either say it doesent have certificates to run or parts are missing. Or it goes to a black scree and gets stuck on "Jumping To Kernel" and it stays like that for ages (tested for 1 hour, never budged)
The DL desire series via MAGLAR wont work either, I need HSPL (sp?) to install MAGLAR but HSPL keeps reporting back that the file Rapi.dll is missing.
My SPL version is 1.42**** so technically thats right ( from what I have read )
I have tried formatting the SD card via PC and device, also tried a factory reset and an additional 2 other SD cards. Still nada.
What else can it be? Someone mentioned the radio but there is so many questions being asked in a specific thread that mine gets lost and since this is more of a global issue I thought a thread of its own is deserved
I really want this and will go to any length to get it ( not keen on ROM flashing thought, would like to avoid turning the handset into a hammer rather than a phone)
Hope I havent busted any rules
Cheers,
Gib
You need radio 2.14 or more for Android.
aka, upgrade your ROM.
You are not alone
You are not alone here.
I have been having this problem too, I get stuck on the HTC white screen. though I haven't tried much ROM but I have tried formating and reflahing of my WM ROM.
I once did a stock ROM official update with: (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2 .15.50.14_LEO_S_Ship)
ever since I have not been able to find how to flash using SPL, I have been flashing using SSPL_RU and my radio is 2.15.50.14.
Could this reason be the problem.
I need help please I want to have a feel of droid.
Know the feeling
I have been trying all the different android magldr sd roms and everytime its the same story. First boot fine. Second boot and on it just hangs at the green htc logo. I have tried so many things i don't know what to do next.
Have you tried one of the Energy ROM's? I found on my unlocked HD2 that these were the only roms (going back a while now) that I could get Android running off an SD card. I've since heard that there is a basically blank rom for people who want to run nothing but android. It's a small rom, only about 30mb.
It's in a few places around the board. I can't remember what the name of that one is off the top of my head, but any of the Energy series, or the Miri ROM's apparently work too.
Good luck!
Gibbo3771 said:
Hi,
I have been on this forum for the past 2-3 days trying to get android on my gf's HD2 and it just wont have it.
I have tried MCCM's HD v4 Desire one
I have tried Froyo 1.5
I have tried DL Desire Series, both SD and MAGLAR.
The ones where you click CLRCAD.exe then haret.exe either say it doesent have certificates to run or parts are missing. Or it goes to a black scree and gets stuck on "Jumping To Kernel" and it stays like that for ages (tested for 1 hour, never budged)
The DL desire series via MAGLAR wont work either, I need HSPL (sp?) to install MAGLAR but HSPL keeps reporting back that the file Rapi.dll is missing.
My SPL version is 1.42**** so technically thats right ( from what I have read )
I have tried formatting the SD card via PC and device, also tried a factory reset and an additional 2 other SD cards. Still nada.
What else can it be? Someone mentioned the radio but there is so many questions being asked in a specific thread that mine gets lost and since this is more of a global issue I thought a thread of its own is deserved
I really want this and will go to any length to get it ( not keen on ROM flashing thought, would like to avoid turning the handset into a hammer rather than a phone)
Hope I havent busted any rules
Cheers,
Gib
Click to expand...
Click to collapse
Solution!
Instructions :
- Download the Android SD version of your choice. Unzip, Extract the 'Android' folder to root of your SD Card. (Make sure to Format the SD card before doing this.)
- After you have done all steps go into Android folder and tap CLRCAD (for working sound), and after that just tap HaRET
-Booting ..
-Enjoy
kottaho said:
You are not alone here.
I have been having this problem too, I get stuck on the HTC white screen. though I haven't tried much ROM but I have tried formating and reflahing of my WM ROM.
I once did a stock ROM official update with: (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2 .15.50.14_LEO_S_Ship)
ever since I have not been able to find how to flash using SPL, I have been flashing using SSPL_RU and my radio is 2.15.50.14.
Could this reason be the problem.
I need help please I want to have a feel of droid.
Click to expand...
Click to collapse
Ater trying some nand roms i came back to the orignal firmware( the same as you).
And i also have this problem , it just load into a picture with htc on it.
Have you tried using a different SD card? My Sandisk 8gb didn't accept anything. I had an old 512mb laying around that came with my E90, loaded SuperRAM on it (aprox 450mb including data.img) and it booted straight away.
2.15.50.* is the right radio for most SD builds, make sure you have enough free space on SD. most builds have at least 512mb if not 1gb data.img which gets created when first boot. If runs out of space it will get stuck on boot screen. No hspl required with 3.14 HTC winmo rom
I also try to get Android in my HD2 (energy ROM). I am somewhat puzzled however: I want to flick back and forth between WM and Android and many programs I have reside onto my SD card. I have read in an earlier post that before attempting Android I should format my card - does this mean that I cannot have WM data (programs etc) in the same SD card I run android? or that I can transfer them back AFTER I manage (if) to load Android?. Thank you
The SD card has to be formatted in FAT32. Just to make sure the card is clean I copy all my data to my pc, format the card and transfer it all back.
Aesthetic said:
The SD card has to be formatted in FAT32. Just to make sure the card is clean I copy all my data to my pc, format the card and transfer it all back.
Click to expand...
Click to collapse
OK thank you - got it!
Unfortunately I cannot get passed the green HTC splash screen - my HD2 stays there for time no end and the only solution is to take battery out. Any suggestions?
Assuming you've got everything set up properly (right radio, hspl, ...) which you can find on the Android forum. I think you'll have to try using a different brand of sd card. Some cards simply don't play nice with Android.
Got uber annoyed with the SD method, just ended up doing a full scale flash to ROM. Was easier lol
MrAskani said:
Have you tried one of the Energy ROM's? I found on my unlocked HD2 that these were the only roms (going back a while now) that I could get Android running off an SD card. I've since heard that there is a basically blank rom for people who want to run nothing but android. It's a small rom, only about 30mb.
It's in a few places around the board. I can't remember what the name of that one is off the top of my head, but any of the Energy series, or the Miri ROM's apparently work too.
Good luck!
Click to expand...
Click to collapse
I am using Energy ROM (Energy Serie: Energy.Leo.28244.Sense2.5.Cookie.2.0.Feb.12)
My phone just hangs on the white HTC screen when I try to boot into Android from the SD card. I flashed my ROM with SSPL_RU after an update with the Stock ROM (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)
ehh
Aesthetic said:
Assuming you've got everything set up properly (right radio, hspl, ...) which you can find on the Android forum. I think you'll have to try using a different brand of sd card. Some cards simply don't play nice with Android.
Click to expand...
Click to collapse
I would almost agree with that except, i have 2 exactly the same 16 gb cards, each with a 3 gb fat32 primary partition. 1 loads android but wont allow me to do things like take pictures[it says there isn't an sd card.] The second card just hangs at the green htc screen. Even if I copy the working partition to the other card, it still hangs.
evo1rs said:
2.15.50.* is the right radio for most SD builds, make sure you have enough free space on SD. most builds have at least 512mb if not 1gb data.img which gets created when first boot. If runs out of space it will get stuck on boot screen. No hspl required with 3.14 HTC winmo rom
Click to expand...
Click to collapse
Thanks for this Info. I didn't take into consideration that the file will be enlarged during booting. The copied Android folder was 508MB in size but this got enlarged to about 1.3GB during boot up. I thought if I just leave about 1.2GB in all the SD card I have been trying that it should be enough. But I was wrong.
Thanks a lot I have done multiple reboot without any problem.
I am enjoying my first Android feel.
Thanks once again.
Android on HD2 hates most SD Cards
From my own limited experience to also having read many posts I can say that most sd cards prevent Android from running properly on the hd2. Mine works fine with radio 2.14/2.15 and the stock Sandisk 16gb card that came with my tmous hd2, but I recently tried a wintec 16gb card that made Android run like a broke-wheel-cart and other sd cards I have laying around make it fail.
I think everyone needs to add what card they are using to their signature, or else we might all just end up howling in the wind.
Based on some feedback from another post I just ordered this Sandisk 16gb card from Newegg. It is Model # SDSDQ-016G-A11M . It is reported that that model# provides class10 speeds even though it is sold as a class2. It's use with Android is supposed to be good.

[Q] SD card Not Showing - Ultra Noob Here :S

Received my first HTC through the post yesterday and joined the site in an attempt to run android. I know nothing and there's an overwhelming amount of information on this site so just need someone to point me in the right direction.
Used this and followed instructions carefully: http://forum.xda-developers.com/showthread.php?t=957652
My problem is after running clrcad.exe and haret.exe, the phone reset after a grey screen. Looked like it went well but now the SD card has disappeared from the file explorer and windows when connected through USB.
Any help appreciated, just want to get the SD card back up so I can format it and so on. Thanks.
I take it by the lack of replies that this isn't a common problem. It's kind of put me off trying any new ROM's as a simple procedure like this can't even go straight. Will have to stick with Winmo then
Im not quite sure anymore, but i dont think you are able to mount your sd as long as you use sd builds. I dont know if this is changing with an ext partition on your sd.
Just check out the NAND section. Its installed on your internal memory and not running from sd. WinMob will be fully deleted and replaced with Android, so first do a backup of contacts etc!!!
If you do not need WinMob for any kind of apps for work etc which arent ported to Android yet (which i dont think there are much NAND is the best solution for you.
Started like you with sd build 2years ago, too. But switched to NAND as soon as it was stable.
Now it is almost perfect.
Sent from my HTC HD2
I have same problem
I had the same problem but now i use magldr and boot-ing goes vith no problem and the card is showing
deth667 said:
I had the same problem but now i use magldr and boot-ing goes vith no problem and the card is showing
Click to expand...
Click to collapse
How did you get the card to show again? Or did you buy a new one?
Just a thought,have you tried a soft reset? Switch phone off Take back cover of and press little red button for a few seconds,put cover back on reboot into android
Also make sure your SD card is formatted to 32kb (slow format)
Sent from my HD2 using xda premium

Storage card not working, Cant access WP7 HELP!

SCREEN HD2:
Storage card not working
Your storage cart has changed is
damaged or is non-compliant.
To fix this, turn off you phone and either
remove the storage card or replace it with
a new compliant card. Then you’ll need to
reset your phone to the original factory
settings.
To reset your phone, refer to the owner´s
manual.
I installed [19.7.2012][NT 8779 V1 18L 3La 3Lb]LEO_ML_51240101_R_5710902a_22515021 by ansar. Before I had this rom installed http://forum.xda-developers.com/showthread.php?t=953078. I had SPL-2.08.HSPL, Radio 2.15 and DFT MAGLDR Bootloader v1.13 installed. While using the HD2O© WP7 8779 (TANGO) The phone worked fine, I even was able to attain a activation code. (did it all in like 4 hours really late last night). So this morning I just flashed the one I said i installed 2nd above and thats when I started getting this problem. Ive tried the methods of the 1234 reset and things. So wondering if i have to go all the way back to stock 6.5 and work my way back again or if there is something that I can do. Because even booting up without SD card i still get the same error message.
did you format your card in PC before flashing new ROM?
sometimes behavior with SDcards is unpredictable... almost all problems in HD2 WP7 is related to SDcards...
dxdy said:
did you format your card in PC before flashing new ROM?
sometimes behavior with SDcards is unpredictable... almost all problems in HD2 WP7 is related to SDcards...
Click to expand...
Click to collapse
0k so i was able to get past it by going into madglr and pressing reset. But unfortunently the phone won't recognize any of my 3 sd card. 2 are 2gb and one is a 4gb. Is there anyway to get it to recognize them?
-thanks
krinilssen said:
0k so i was able to get past it by going into madglr and pressing reset. But unfortunently the phone won't recognize any of my 3 sd card. 2 are 2gb and one is a 4gb. Is there anyway to get it to recognize them?
-thanks
Click to expand...
Click to collapse
per other posts and threads...it's a hit and miss with sd cards. personally, i've never had any sd card issues using yuki rom, but roms from other chefs have caused sd card compatibility issues. there is something about the base wp7 rom by those other chefs which causes sd issues. i have used sandisk, 3c, topram, lex brands...no problems with yuki, but causes problems with pdaj, hd2o, and ansar roms.
and fyi...there's no need to format the sd prior to using with wp7. wp7 will reformat the whole card anyway.
another issue you may have with your sd card is if you used them with yuki. if this is the case, you need to reinstall base yuki, install devstorageunlock cab, unlock sd card, then you can use the cards with roms by other chefs.

Categories

Resources