I've done everything I could do without taking apart the phone.
I don't know what's wrong, sometimes it will work sometimes it won't.
Now though, I reinstalled WM5 (latest cingular build) and I have to tap the screen to start using it, but the screen won't work.
that happened to me when I put a screen protector on my phone. I took off the protector and the phone worked again
I dont have one of those.
Has the mobile fallen on the ground? Make sure the screen doesn't have any dust on the borders... if there is contact on the screen on any point, it won't recognize any other point of touch (multi-touch is not supported by our screens).
I'll try cleaning that out when I get a can of compressed air
I got it to work for a second so I can use the phone. Now I just want it to always work.
dferreira said:
Has the mobile fallen on the ground? Make sure the screen doesn't have any dust on the borders... if there is contact on the screen on any point, it won't recognize any other point of touch (multi-touch is not supported by our screens).
Click to expand...
Click to collapse
Thanks so much for this post!!
The other day my touch screen stopped responding to my taps.. The lcd worked fine and I could still navigate with the buttons, it just wouldn't respond to touch..
So I was almost ready to take my phone apart to see if the digitizer connection was loose.. I decided to search around and see what other ppl had to say about TS problems.
I read this post and started to go around the edges of the screen with a business card and lo and behold it started to work again.. Must've just been some dirt up in there.. You just saved me a huge headache!
Thanks dferreira
My screen is all white now.
Anyone know how to take apart the phone, I'm thinkin my ribbon is not connected right.
I'm sorta new and not exactly sure how to submit questions.
I installed the SPB mobile shell on my elfin htc and now the touch features don't work and my phone won't sleep without what appears to be the backlight on. Can someone provide some directions on how to fix this? Can't get to the bootloader either.
if you reset your device, can't it boot up into windows mobile?
if it boots up, why not connect it to the pc and try removing the last app through activesync?
if there isn't anything that important on the device, did you think of a hard reset?
Thanks for the quick response, however, I did do a soft reset, the screen is not responding (completely frozen). I've already removed the program, I thought was the culprit (spb mobile shell). I did a backup, but without touch features, I can't restore backup. I can't do a hard reset that's not working properly either. Any additional ideas, I'm at a complete lost.
Hi
Touchscreen of my HTC Touch (P3452) stopped working. I tired following:
- hard reset
- hard reset successful, then It asked me to tap the screen for alignment then I tap, it worked but on Calibrate screen where you align your screen touch is not working. nothing is happening after that even power button is not working. my Touch is not hanged coz if I touch the screen after It goes to sleep, the backlight will turn on.
So I though may be something wrong with the original ROM, then I tired flashing it with cooked ROM's but nothing worked.
I am still stuck at calibiration screen
-
Plz help, I miss my HTC Touch (P3452) so much!!!
If your touchscreen is not working, there could be only 2 solutions.
- Get a digitizer off dealextreme.com
- Hard reset device.
my $0.02.
Cheers.
What's a digitzer and what does it do? I've looked in cell phone accessories and did a search on dealextreme.com, however, unable to locate such an item. Can you provide a little more detail. Desperately trying to get this phone to work and right now this appears to be the only solution. Hard reset isn't working.
toot-b said:
What's a digitzer and what does it do? I've looked in cell phone accessories and did a search on dealextreme.com, however, unable to locate such an item. Can you provide a little more detail. Desperately trying to get this phone to work and right now this appears to be the only solution. Hard reset isn't working.
Click to expand...
Click to collapse
Come on, Google man!
http://www.dealextreme.com/products.dx/category.506~search.htc touch digitizer
Digitizer is a 'panel' which is above the LCD, which senses where your hand is at on the phone.
Something like this:
http://en.wikipedia.org/wiki/Graphics_tablet
It is just something which sense where is your fingers are in the touchscreen.
Hi toot-b:
I had a similar problem a few days ago. My screen stopped working completely. I gave it a few taps and a squeeze and it started working.
After a while it stopped working again and did not respond to the squeezing too. Then out of desperation, I tried searching the internet. One guy had given the most idiotic explanation I've ever come across.
He had advised to take a blade and peel away the LCD screen and after taking the screen away, to rub the copper contacts with the blade and then putting it back in!!!
Well, I was really really desperate and I had to try it. I didn't remove the screen completely. I just took the screen off a wee little bit on the bottom right corner near the camera button. I kinda got scared after that and put it back in.
To my surprise, the touch screen started working perfectly and till now its doing great. Try it at your own risk. All the best!!!!
theo2409 said:
Hi toot-b:
I had a similar problem a few days ago. My screen stopped working completely. I gave it a few taps and a squeeze and it started working.
After a while it stopped working again and did not respond to the squeezing too. Then out of desperation, I tried searching the internet. One guy had given the most idiotic explanation I've ever come across.
He had advised to take a blade and peel away the LCD screen and after taking the screen away, to rub the copper contacts with the blade and then putting it back in!!!
Well, I was really really desperate and I had to try it. I didn't remove the screen completely. I just took the screen off a wee little bit on the bottom right corner near the camera button. I kinda got scared after that and put it back in.
To my surprise, the touch screen started working perfectly and till now its doing great. Try it at your own risk. All the best!!!!
Click to expand...
Click to collapse
Do you have some photos to show us?
Cheers
touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
Howdy folks... i will try to get a picture up tomorrow...
Basically a few days ago i picked up my phone and noticed a marble type effect on my screen, very similar to when you put inks into water etc.
At first i thought the lcd screen had leaked etc but my (actual) screen looks normal, no missing pixels or screen errors
It happened again few days later and then this morning my gf removed it from her pocket the whole touch area was like it... and still is now... 10 hours later...
Could water or moisture build up between the touch part and then screen???
During the time it happens the touch area doens't function at all!!
Any ideas or thoughts at all??
Thank you all very much in advance!!
dont know, but this happeded on my touch ELF and is happning on my touch 3g now, not happy might try a few crazy things before replacing the digitiser il let you know if anything works.
Heres a pic attached...
Cant really see it but maybe help to see the issue?
Can kinda see the outline of where the marble effect starts... and you can see the purple and lights green/blue effect its left..
I wouldn't mind but the touch screen doesn't work kinda making the phone useless!
tried a few things, like freezing than heating, worked for a while, calibration kept falling out. put it away and went back to my elf. tried it yesterday and it hardly responds to touch at all, responds randomly when you press it haaaaaaarrrddd.
might be time to get new parts
Looks like the touch screen sensors are out of sort. My experience with my previous model (HTC Kaiser) similar thing happened. Changing the screen solved everything, works like new.
I had problems with the touch screen on my touch 3g and tryed everything (hard restarts, screen aligns, millions of times) until i changed the digitiser in htc service and everything works fine now, like new as azahidi said. Good luck.
Hey everyone. I searched everywhere I could find but with no avail.
Here's my problem. I replace my digitizer with another one. I replaced it just fine as far as my knowledge goes, but after all finished and everything ready and closed/screwed on, I fired it up and the backlight was GONE!
The display works, the touch works, MyMobiler works both with mouse and finger touching on the screen, but the damn screen is DIMMED! I can barely see it if I removed the digitizer or if I shed some light(flashlight) on it from an angle. But just barely.
Tried 3 different ROMs since some suggested that on another thread, did a Hard/Soft reset, with no results.
Is this a screen/dimmer problem or whatever? So if anyone with some answer please help me out. Thank you.
I know that very few look at the Blackstone section nowdays but guys I really need some advice because I need to sell it and I have to pay for repairing(hoping to avoid it) before doing so and also because I already tried everything and I had enough of disassembling it and testing every connector/flex cable if they are connected properly.
Thank you.
loose or dis-connection somewhere..
check all your ribbons are properly lined up, and connected propperly too..