Hey guys,
I have a question about the camera button. I noticed on my Omnia 7 that the camera button isn't as tight and secured as the power button, and that the camera button is slighty wobbly. It's not bad at all, I was just wondering if it was just my device. Thanks.
I htink it is because the camera button is more prominent while the power button is almost flush with the phone casing!
hboos said:
I htink it is because the camera button is more prominent while the power button is almost flush with the phone casing!
Click to expand...
Click to collapse
I figured the same as well!
Yep, its a bit more loose. I never noticed it though.
Hi, I think it is deliberately kept that way on the Omnia 7, since a softer push on the camera button does not do much apart from adjusting the focus and then pressing it further captures the image. It's not that big a deal though, I sort of like it that way.
Related
Hi!
Is it just me or is the power button real tough to press?
Has anyone thought of adding a small mod to raise this button to make it easier to press?
Any luck?
Thanks!
The left hand side of mine (as you look at the screen) is slightly raised.
Isn't yours ?
Yup, it's raised but just a little; i don't think I'm "fat thumbed" but it's really difficult to press while using just one hand.
I agree but it's not as bad as I found the Tytn II.
I've now got used to aiming at the left hand side of the HD button which is raised higher.
Of course, I often just use the stylus pull to switch on as well.
On the Tytn II I superglued a slice of cable insulation to the button. This worked fine. I used a small black cable and cut the insulation longways to the right size. It needed steady hands but was a good solution.
one good thing in other pda's is that in the settings menu was that keylock applet, in which you could have all the keys unlocked, so you can power on the device only by pressing the front keys, and not bother with the power button.
But i can not see this applet in the rom i have 1.14
Does anyone know how we can have this keylock applet again?
While it can sometimes be a bit of a pain to press I'm glad that it doesn't accidentally get pressed whilst in my pocket, I often don't bother locking it so I'd be pressing stuff all over the place.
Cheesy Dave said:
I agree but it's not as bad as I found the Tytn II.
I've now got used to aiming at the left hand side of the HD button which is raised higher.
Of course, I often just use the stylus pull to switch on as well.
On the Tytn II I superglued a slice of cable insulation to the button. This worked fine. I used a small black cable and cut the insulation longways to the right size. It needed steady hands but was a good solution.
Click to expand...
Click to collapse
Yes, i'm also seriously contemplating that solution
I'm just afraid that the button might get damaged because of the super glue... things might get messy
ubik said:
Yes, i'm also seriously contemplating that solution
I'm just afraid that the button might get damaged because of the super glue... things might get messy
Click to expand...
Click to collapse
Well it worked so well on the Tytn II that I never took it off so I can't judge !!
pntzamaras said:
one good thing in other pda's is that in the settings menu was that keylock applet, in which you could have all the keys unlocked, so you can power on the device only by pressing the front keys, and not bother with the power button.
But i can not see this applet in the rom i have 1.14
Does anyone know how we can have this keylock applet again?
Click to expand...
Click to collapse
Funny, I'm trying to achieve the exact opposite
http://forum.xda-developers.com/showthread.php?t=455215
I want my buttons to work only if power is pressed
sebbes said:
Funny, I'm trying to achieve the exact opposite
http://forum.xda-developers.com/showthread.php?t=455215
I want my buttons to work only if power is pressed
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=3003051&postcount=2
Has anybody have the same problem I have with the DHD volume button? My device has the bottom part of the button jutting out a little bit, and I am worried it might fall off. I have only had this phone for 2 and a half weeks, so before considering an exchange, has anybody had the problem and fixed it? I would hate to take the button off and not be able to put it back on properly.
Can you take pic and upload it?
Sent from my Desire HD using XDA App
I had the same problem. I sent mine back to Phones4u after about a week.
Whether it would have fallen off or not, I don't know - but as mine was like that after a week or so I didn't want to take any chances.
Sent from my Desire HD using XDA App
Here are the pictures, hope they're good enough quality.
Mine's the same, it's going back when vodafone get more stock.
I also noticed the top of the screen clicks and creaks as if its loose.
Mine is the openmarket version and vodafone only have the branded handsets in stock anyone know the difference?
Just return it.
Hi all,
I've my phone about a month now and I have almost the same problem with the volume button.
Actually it isnt that bad as the pictures above but you can definetally feel that the vol-down button sticks a litle bit out while the vol-up is very hard to press.
(The powerbutton is also hard to press but that seems to be with everyones phone)
It seems HTC is very bad in making hardware buttons, I had also button problems with my Touch HD and my HD2!
What do you recommend me? Should I return it or not?
Ps for htc maybe:
The main reason why htc makes hard to press (power) buttons is to avoid acitentally turning the device on/off while its in your pocket or wathever.
I have a solution, make good easy to press CAPACTIVE (power) HARDWARE buttons.
I think that should solve a lot of problems
The bottom bit of the volume button comes out a bit too on mine but not that far!
Smigit said:
Just return it.
Click to expand...
Click to collapse
whats the point if u return it they dont accept it.
johnkor said:
whats the point if u return it they dont accept it.
Click to expand...
Click to collapse
Based on the images he posted somethings clearly wrong with it. The buttons not set in the device properly at all.
Same problem...
keemyb said:
Here are the pictures, hope they're good enough quality.
Click to expand...
Click to collapse
From the pictures, i had the exact same problem. On day one, i was so happy to have the phone i looked passed it ( it was the very slightest bit sticking out ), then eventually a week later it really started coming loose, when you press volume up for example the bottom of the button would literally pop out and dangle.
In the end i arranged for a replacement the next day as i was illegible as i only had, had the phone for a week. What struck me is the elastics holding the volume rocker in place? thats the last thing i'd expect something made out of "metal" to be locking it in place.
Hi all,
i have the same problem. the volume rocker is not sticking to much out but you can definitely feel the difference between the upper and the lower side of the button. the upper side is like pushed in and kind of hard to press and you don't fell the "click" when you push the vol up. the lower side i slightly sticking out but you can fell the "click" when you push the vol down.
how do yours fell when pushing vol up?
i don't know if i should replace the device or not???
here are some pics of my problem
thanks
poetthd said:
Hi all,
i have the same problem. the volume rocker is not sticking to much out but you can definitely feel the difference between the upper and the lower side of the button. the upper side is like pushed in and kind of hard to press and you don't fell the "click" when you push the vol up. the lower side i slightly sticking out but you can fell the "click" when you push the vol down.
how do yours fell when pushing vol up?
i don't know if i should replace the device or not???
here are some pics of my problem
thanks
Click to expand...
Click to collapse
I returned mine and I think you should too.
Works perfectly now, but not sure if it can last 20 months as my old one broke so early. Taking the greatest of care whilst touching the volume rocker now. Kinda sad that a device so expensive has quite a few cosmetic flaws.
Exact same issue with mine i dabbed some super glue ont he plastic and the metal. Its alot better now. Seen new buttons on ebay, has anyone tried these yet? How do you install them?
http://cgi.ebay.co.uk/ORIGINAL-HTC-...K_Replacement_Parts_Tools&hash=item3cb89dd305
poetthd said:
Hi all,
i have the same problem. the volume rocker is not sticking to much out but you can definitely feel the difference between the upper and the lower side of the button. the upper side is like pushed in and kind of hard to press and you don't fell the "click" when you push the vol up. the lower side i slightly sticking out but you can fell the "click" when you push the vol down.
how do yours fell when pushing vol up?
i don't know if i should replace the device or not???
here are some pics of my problem
thanks
Click to expand...
Click to collapse
In the picture you attached, the volume key lok in the correct place. However, the Aluminum or battery cover is not in the correct shape. I can see some distortion.
Hi all,
i sometimes notice this problem on my omnia 7..
when the screen is turned off and i press the middle button the screen is not turning on.. i have to press it again or press the power button.. anyone experienced this problem?? any idea what can it caused?? I do not have any apps installed..
Thanks..
I have the same, sometimes the middle windows button will not wake the phone up.
When the middle button refuses to wake up the phone the camera button also refuses to wake up the phone and go straight to the camera app. I need to press the power button and then the camera button.
Annoying.
Do you guys know the term "it is a feature" when something in reality is a flaw - well in this case it really is a feature
If the sensors notice that the phone is in a complete dark surrounding it assumes the phone is in a pocket. Therefore it not wakes your screen up and also the camera button will not work. You can test this if you hold your thumb over the sensors next to the speaker strip.
Should your camerabutton not function in a bright setting, it is of course a different situation.
What an easy and clever answer..
Thank you very much.. next time i will think more.. OMNIA 7 rulezzz
Aaaah clever stuff!
Superb thanks
hi guys,
i find the power button on my s4 to be a little squishy. the volume button and home button both have a much better feel. the click when pressed.
The power button on the other hand doesnt stick out as much. it has a tectile feel but just a bit squishy. lol
intolaomair said:
hi guys,
i find the power button on my s4 to be a little squishy. the volume button and home button both have a much better feel. the click when pressed.
The power button on the other hand doesnt stick out as much. it has a tectile feel but just a bit squishy. lol
Click to expand...
Click to collapse
Nope there should be a definite click to the power button. Mine is also squishy, I had 5 S4 previously and they were all fine.
I decided to keep the one with a dodgy power button as the screen is ok and its PVS binning 5.
But no, it's not normal, it's defective. If it really bothers you then send it back
Yeah mine is acting wierd aswell, but you get used to it after a few weeks!
i dont like te power button on S4 it's pushed in heaps unlike the S2.
Prefer the S2 power button
Just wondering if anyone has slightly loose buttons. As in, if I tap them lightly I get a tiny metal on plastic sound as if it the button itself wasn't attached to the sensor on the inside.
I'd like to have a perfect device but I'm afraid of RMAing and getting a screen issue or something worse.
Yeah I noticed that too, not really an issue. Also if you press lightly on the power button wothout activating it you can feel it spring back...just an fyi
joshbean39 said:
Yeah I noticed that too, not really an issue. Also if you press lightly on the power button wothout activating it you can feel it spring back...just an fyi
Click to expand...
Click to collapse
is the volume button springy as well? just trying to make sure I got a defect-free phone. I haven't had a phone yet with springy side buttons. Seems like they might not last that long??
Not like the power button.
Mine are loose as well but I think it's common across many devices. I've had loose volume and power buttons on my Note 4, Moto X 2014, and even the HTC One M9. I've checked on these occasionally and have been told that a little "play" in the buttons is normal.
Sent from my XT1575 using Tapatalk