Database Users

Cyanogenmod 6.1 for GT i9000 Chat

What?
is CM finally out of development phase or smth?
Edit: As you can probably tell, I am an impatient bastard.

Is the packaged version non-rfs then?
Thanks.

Two post, two fails.
JUST READ THIS DAMN THREAD! ALL INFOS ARE STILL THERE!

Yay! Thanks Aery. I appreciate all the hard work you guys have put into this.
Well done !

Excellent stuff. I have run it since this afternoon and it's already a great improvement over the Samsung firmware.
So far I have found that it does not seem to find other Blue-tooth devices (just like it says on the buglist). I have tested with my carkit (Parrot CK3100) and will test with my laptop tomorrow.
Keep up the great work! I am so happy I have the beginning of a CM on my phone!

Thanks Aery. For me work perfectly. i'm on jp5 (new italian froyo, jpp modem). I appreciate all the hard work you guys have put into this.
Well done !
edit
Blue-tooth devices problem also for me. Volvo s80 car kit

Wow! Thank you, I have been really waiting towards this. Already flashed the earlier build but going to upgrade now Hope you guys can fix the remaining bugs too, but take your time, I know it's nerve-wrecking when some things won't come through Send you pizzas btw...

nice job, ill be sure to give this a go later today

Yay, Finally! Been keep up with the progress on this one eagerly awaiting it
Charging my phone to use it now, Good thing I don't use GPS too often

Did u all read the part "keep this thread clean"!!!
Plz use the other thread for spam, silly questions and use google code page for bug report.
Damn ppl it will drive devs crazy like that.
Ty all devs. Sry for this little spam.
Sent from my GT-I9000 using XDA App

Stock dialer is very ugly
But great job!

This version is SERIOUSLY fast compared to the old ones... lagfix definately did the trick. Used packaged .zip version.

I guess the recovery is clockworkmod right?Not the 2e!!
And when flashing with odin,no pit files and no repartition right??

mertkan said:
I guess the recovery is clockworkmod right?Not the 2e!!
And when flashing with odin,no pit files and no repartition right??
Click to expand...
Click to collapse
Yes it's Clockworkmod.
No pit files and no repartition checked, only PDA.

"flash Google Addon" you mean "12. Choose "install zip from sdcard" -> "choose zip from sdcard"" ?

Thanks Rezou

Any posts removed from the development thread have been put here.

pulser_g2 said:
Any posts removed from the development thread have been put here.
Click to expand...
Click to collapse
Thank you, again!
maybe a perma-ban for second offenders

LOL nice moderator

[Q] Unpacking system.img from Flyer RUU

Hello Nookers,
Remember that Sense 3.0 Port for Nook Project a long time ago? Well, the thread got closed because there wasn't a full product ready.
I'm almost done with my first working Sense Port, but I just need one more thing. First, lemme explain. These apps fail to works because the dump I used was an EVO View 4G dump, not the Wifi-Flyer's dump. So I have now managed to get a hold of a Deodexed Flyer RUU. I have extracted the ROM.zip containing system.img, data.img, etc. What I need now is a way to extract files from those. I have access to a Mac and PC but if ABSOLUTELY NECESSARY I will install Linux.
Thanks,
King Black Bomb.
Moo

if they are img files you can use IM disk to mount the img file on your PC. then you can access them and remove the files that you need to remove.

Dude, before you got banned two weeks ago, you said this would be done in 4 days, and you are still working on it? This is why you are not considered a credible developer.
You can use winimage to extract img files.

indagroove said:
Dude, before you got banned two weeks ago, you said this would be done in 4 days, and you are still working on it? This is why you are not considered a credible developer.
You can use winimage to extract img files.
Click to expand...
Click to collapse
As I agree with the user above about your lack of credibility I'll add some info here for you to try to achieve your task. Attached is the program I use to extract images. ALL YOU DO IS DROP THE IMG FILE ON THE EXE AND IT WILL EXTRACT.

Yes, I did say that, and it was a mistake on my part I thought I would have found the program by then. Turns out a didn't. @xboxexpert I have tried unyaffs it does not work on either Mac or Windows. WinImage? It doesn't work. For some reason it seems encrypted. Same for IMDisk.

why are you even still trying this? HTC HAS MADE SENSE OPEN SOURCE AND WILL BE RELEASED ANY DAY NOW. www.htcdev.com

luciferii said:
why are you even still trying this? HTC HAS MADE SENSE OPEN SOURCE AND WILL BE RELEASED ANY DAY NOW. www.htcdev.com
Click to expand...
Click to collapse
As I understand it, there aren't plans to make HTC Sense open source. This simply lets you write applications that make use of HTC Sense-specific APIs.

Woohoo, more free lawls! Get 'em while they're hot!
The kid has been stuck on the same step for several months, regardless of whichever RUU he stumbles upon on bittorrent. It's pretty pathetic at this point...

did you extract the exe from the rar?

paleh0rse said:
Woohoo, more free lawls! Get 'em while they're hot!
The kid has been stuck on the same step for several months, regardless of whichever RUU he stumbles upon on bittorrent. It's pretty pathetic at this point...
Click to expand...
Click to collapse
Wooo - make fun of the kid! Why would anyone want to encourage learning! I'm a hypocrite, but only this once: If you're going to reply, at least attempt to answer his question or make progress towards an answer.

As long as actual development happens. I'm all for support.
Still rocking the Incredible with the XDA Premium App.

anekdotos said:
Wooo - make fun of the kid! Why would anyone want to encourage learning! I'm a hypocrite, but only this once: If you're going to reply, at least attempt to answer his question or make progress towards an answer.
Click to expand...
Click to collapse
You really need to read his old thread to understand -- in it, I was one of the only members trying to help him... at first. He proceeded to dismiss everyone's guidance -- consistently claiming to know better -- and continued to lie about "progress" for weeks. The extent of his "development" was copying and pasting the Sense apk's into /system... seriously.
There's history here with this clown, so please save your judgments for someone else...

You can try DiskInternals Linux Reader:
http://www.diskinternals.com/linux-reader/

OK, so you need to extract system.img files. You don't have to install Linux, you can run it from a Live CD. And mount loop the .img file to a folder on your system.
Mind PM'ing me a link to the download so I can do so for you? Then you can go ahead and do the port as you would say?
-Racks

To everyone who says I'm not a dev:
I have been making progress, because at first it was complaining about audio drivers, then files in /system/etc, and it kept on going. Finally, and i THINK this is the last step, is to push Wifi-Only frameworks, apks, and the /system/etc folder.
@racks11479 thanks, but I'll only tell others to do my work if I can't. But again thanks for offering.

ikingblack said:
To everyone who says I'm not a dev:
I have been making progress, because at first it was complaining about audio drivers, then files in /system/etc, and it kept on going. Finally, and i THINK this is the last step, is to push Wifi-Only frameworks, apks, and the /system/etc folder.
@racks11479 thanks, but I'll only tell others to do my work if I can't. But again thanks for offering.
Click to expand...
Click to collapse
What are you talking about, aren't you saying you need help extracting the system.img? I'm offering to help...
Isn't that the particular request you are asking in your OP? This is a developer community, everyone here welcomes help where needed. Not one developer on this forum has ever denied any help when they were stuck on an issue.
Not flaming you, but trying to help so you can continue the port you are working on. Don't let pride get in the way of progress.
-Racks

No not pride, it's just as soon as I say yes people will say "oh, the kid need serious help. Can't even extract a system.img."

ikingblack said:
No not pride, it's just as soon as I say yes people will say "oh, the kid need serious help. Can't even extract a system.img."
Click to expand...
Click to collapse
Frankly, they have been saying that for some time now.
As it is, this thread has NOTHING to do with the nook, and needs to be closed. Frankly, i wish you would refrain from making these posts. It is obvious that you have no idea what is going on, and your posts are only serving to make this public info. I welcome everyone working on their dev skills, but strongly encourage those who are learning, to post about it in the right way....

Divine_Madcat said:
As it is, this thread has NOTHING to do with the nook, and needs to be closed.
Click to expand...
Click to collapse
It doesn't need to be closed, just moved to Q&A or General.
Sent from my Gin and Tonic using XDA App

This topic just needs to die. I saw this topic right after he created it but decided to lay low because I had hoped the topic would die out. since it seems like it wont i then must beg for people to stop posting here. Developers and other commenters have been very genorious in giving time and credibility to this poster (me excluded) and all he does in return is deny your help. He has been offered solutions like the ones given before but either he is not smart enough to handle such tasks or he is just a huge troll. So please ignore him. Please let this be the last post in this topic. This has gone on long enough and just needs to stop. If you don't then i will be forced to start posting pictures of dudes in g strings. Thank you very much
Sent from my NookColor using XDA Premium App

[PATCH] Fix Arabic [RTL] on GB 4.5.91

Hello there
I have managed to get fix Arabic on GB 4.5.91, through patching and compiling framework.jar and libwebcore.so.
This will work on every rom that is based on AT&T 4.5.91.
Here is how to patch your phone:
Manually
1) Be sure that your phone is Rooted and Deodexed.
2)Download GBArabic.zip attached and extract it on your phone.
3)Now using Root Explorer or any other root file mangers.
Copy framework.jar to /system/framework/ and fix the permissions
Copy libwebcore.so, libicuuc-arabic.so and libandroid_runtime.so to /system/lib/, and fix the permissions
Be sure that you set permission for all, or you will stuck in bootloop.
4) Reboot and enjoy.​
or
CWM Flashable File
1) Be sure that your phone is Rooted and Deodexed.
2)Download CWM-Arabic.zip attached and place it on your phone.
3)Boot into the recovery, and flash the file.
4) Reboot and Enjoy ​
p.s.
I am quite new here in the forum. So I couldn't post this on the Dev Forum.
Credits:
madmack- for his framework patcher.
Ayman Al Sanad- for his source code libwebcore.
Motorola- for source code
My Computer- for taking so much time compiling .

Changes
Changes:
7/29/2011:
Added CWM zip file

Arabic Files for CherryBlur v1.4d Rom ( it's based on ORFR and not working with At&t)
http://www.mediafire.com/?zd93z9leslz6wtc ... tested by me

Thanks Jack,
Does the Browser and Gmail show Arabic correctly in ORFR?
If it worked, I will update my post.
If not, could try and use my libwebcore.so on your phone, and report back to me?

no it's doesn't support the browser
and sorry I changed the rom and can't test the new files

Successfully Installed - CWM Version
Just flashed the CWM file. Working on Alien ROM.
Works perfectly (RTL needs some alignment "observed in Facebook App only"). Donation is on the way! Extra ordinary work and Cheers!

droidace said:
Just flashed the CWM file. Working on Alien ROM.
Works perfectly (RTL needs some alignment "observed in Facebook App only"). Donation is on the way! Extra ordinary work and Cheers!
Click to expand...
Click to collapse
Glad to hear that, it worked with you.
As for the Facebook App, I can't really help as I do not use the app .
Anyway,
Thank you, and I hope you enjoy it.
and
Ramdhan Kareem

copied the files manually while half asleep, seems that I've messed up ... was stuck in the boot screen, downloaded the automated installation file, applied it and now it works perfectly !
RTL is still not right in gmail messages, but that's super low priority

suleiman.aql said:
copied the files manually while half asleep, seems that I've messed up ... was stuck in the boot screen, downloaded the automated installation file, applied it and now it works perfectly !
RTL is still not right in gmail messages, but that's super low priority
Click to expand...
Click to collapse
What you did wrong the first time, is that you haven't set up the permission, but hey you were half sleep I won't blame you .
I just noticed the alignment of Gmail, and droidace says it happen on Facebook.
It seems that these two apps, use different files to show alignment than the browser.
I will take a look at it.
Thanks for reporting, and hope you enjoy it.

How to donate? - not really much though

droidace said:
How to donate? - not really much though
Click to expand...
Click to collapse
Thank you for the extreme generosity, I really appreciate it.
As for now, I really don't need any donations, I'm sure some people may need them.
Thanks very much, though

How did you update to 4.5.91 ? official update, SBF, OTA, other ? I am still not sure what's the safest way to go to .91 with everyone warning about bricks on this forum
how did you root/deodex ?
Sorry for my dump questions if they sounded so, But i am new into this coming from the iOS land and overwhelmed with all the terms
Thanks mdd5

Hello Ramy, and welcome.
Since you are new here, I will encourage to take a look at THE BEGINNERS (N00B) GUIDE!!!
http://forum.xda-developers.com/showthread.php?t=1154600
Now to answer your questions,
ramy_Maia said:
How did you update to 4.5.91 ?
I did update to 4.5.91, by unlocking the bootloader and flashing one of the roms here on dev section, not official.
I am still not sure what's the safest way to go to .91 with everyone warning about bricks on this forum
Everything is safe as long as you follow the guide.
many of the bricks happen here is because people updated to .91 using official then tried sbf to an older version.
When you update using official, you can't flash an older version.
how did you root/deodex ?
As of now, the only way to have root and deodex on .91 is by flashing unofficial ROMs
So you will need to unlock the bootloader and flash one.
Sorry for my dump questions if they sounded so, But i am new into this coming from the iOS land and overwhelmed with all the terms
Your question are not dumb, I was just like a couple of weeks ago.
However, it is better to ask questions like this in Atrix 4G Q&A forum, so you get better answers and faster than here. You can also use search
Thanks mdd5
Click to expand...
Click to collapse
Thanks, and I hope I helped you a little.

Thanks for the tips, i will go through the links

Alright Good Luck,
Did the new update of facebook fixed that issue?? It seems that it is fixed now.

mdd5,
I picked up your comment on my blog and I wanted to let you know that I added your Atrix GB libwebcore.so to my blog with a special note to you. If you would mind that for any reason, please let me know and I'll remove the link and recompile the sources myself.
Great work. I'm glad to see people using my blog and the sources to get Android arabized

Options of Arabic Fonts
Not really sure if there is an option to change the Arabic fonts? Any ideas?
Awesome work anyway with or without fonts

Thank you for your effort
In Alien Rom, Does it work for Write & Read or full (with menus)?
same question in Cherry Rom.

madmack said:
mdd5,
I picked up your comment on my blog and I wanted to let you know that I added your Atrix GB libwebcore.so to my blog with a special note to you. If you would mind that for any reason, please let me know and I'll remove the link and recompile the sources myself.
Great work. I'm glad to see people using my blog and the sources to get Android arabized
Click to expand...
Click to collapse
Thanks to you for providing the sources, and keep it up.
As for for the compiled lib, I wouldn't mind posting it.
It's all because of you blog, I was able to do this.
Thanks again.
droidace said:
Not really sure if there is an option to change the Arabic fonts? Any ideas?
Awesome work anyway with or without fonts
Click to expand...
Click to collapse
There is several fonts available on the Internet, I don't have any right now.
I will post it on here whenever I find one.
Ferasalsubhi said:
Thank you for your effort
In Alien Rom, Does it work for Write & Read or full (with menus)?
same question in Cherry Rom.
Click to expand...
Click to collapse
Right now, it is Write and Read only, (without the menus).
This patch will work on every rom that is based on AT&T 4.5.91.

mdd5 said:
There is several fonts available on the Internet, I don't have any right now.
I will post it on here whenever I find one.
Click to expand...
Click to collapse
So guide me here, all that I need is to find the desired font and then (Rename it to "DroidSansArabic" and replace it with the one in /system/fonts?

[XOOM 2] Xyboard ROOT is here!

Thanks to Dan Rosenberg, he will be posting a 1 click method to Root your Xyboards! And major themer Bignadad will have a Xyboard theme coming soon.
http://www.mydroidworld.com/topic/10487-root-droid-xyboard-root-1-click-method-coming-soon/
ETA: Says will work with VZW Xy's and w/ or w/out OTA's!!!!

Report back when you've tried it with success. That will be GREAT news.

Yea, he has tested on my Xoom 2 10.1 (After OTA) works great. He told me that the method will be possibly be up Friday or Saturday on the blog so keep checking his website.

Worked on mine to. My VZW Xyboard 10.1 was the "before OTA update" it was tested on.
Edit: its out: http://vulnfactory.org/blog/2012/02/17/rooting-the-xyboardxoom-2/

Yawn. Files or it didn't happen.

majikfox said:
Yawn. Files or it didn't happen.
Click to expand...
Click to collapse
<------ the douchebag forum is that way....

got556 said:
<------ the douchebag forum is that way....
Click to expand...
Click to collapse
Lollll...... "FINISH HIM..... FLAWLESS VICTORY! "
Sent from my Motorola Droid Xyboard 10.1 with Verizon 4G LTE

Awesome.
Now would one of you fine xyboard owning gentlemen/ladies mind sharing motocast?

Cubanluke88 said:
Awesome.
Now would one of you fine xyboard owning gentlemen/ladies mind sharing motocast?
Click to expand...
Click to collapse
http://db.tt/5NnxsW3M
I think thats it, I'm not sure. The package name as you'll see isn't "Motocast.apk"
but its the only thing that made sense since there isn't an apk in there with that name.

wesscoggin said:
http://db.tt/5NnxsW3M
I think thats it, I'm not sure. The package name as you'll see isn't "Motocast.apk"
but its the only thing that made sense since there isn't an apk in there with that name.
Click to expand...
Click to collapse
Thats definitely it, thank you for sharing!
Now I need to figure out how to get it to work. A simple apk install was a no-go and dropping it in /system/app didn't work either.
Gives me something to do today I guess
Any chance you wouldn't mind doing a titanium backup of motocast and sharing the 3 files?

I can't wait for this. Has anyone tried to unblock the ports that's required to be open to make the tablet work with programs like airplay, wifi explore and file expert to make possible wifi files transfer from my tablet to my linux os? Are there any programs to do that? Probably Droidwall do this , can anyone with rooted device try it ?
Sent from my XOOM 2 ME using Tapatalk

So this is also applicable for the Xoom 2? Can't wait for this

Cubanluke88 said:
Thats definitely it, thank you for sharing!
Now I need to figure out how to get it to work. A simple apk install was a no-go and dropping it in /system/app didn't work either.
Gives me something to do today I guess
Any chance you wouldn't mind doing a titanium backup of motocast and sharing the 3 files?
Click to expand...
Click to collapse
Motocast tibu backup zip
http://db.tt/wmvtwQlV

wesscoggin said:
Motocast tibu backup zip
http://db.tt/wmvtwQlV
Click to expand...
Click to collapse
Thank you!
Testing now but it seems to be hanging up on the restore (tried both restore app and restore app + data).
Maybe I'll get lucky but if not oh well, I'm sure someone smarter than me will get it to work.
Thanks again!

Dans posted his Root tool! http://vulnfactory.org/blog/2012/02/17/rooting-the-xyboardxoom-2/

Cubanluke88 said:
Thank you!
Testing now but it seems to be hanging up on the restore (tried both restore app and restore app + data).
Maybe I'll get lucky but if not oh well, I'm sure someone smarter than me will get it to work.
Thanks again!
Click to expand...
Click to collapse
If you get it to work let me know.... I have it working on my xyboard and trying to get it on my atrix 2 but no luck there, so instead I use zumocast!
Sent from my Motorola Droid Xyboard 10.1 with Verizon 4G LTE

have root
yay have root thanks Dan. Have shown my appreciation hope other do as well.
I think this means we need our own forum or at least a sub forum. Next stop that pesky bootloader.
Seperately having trouble with set cpu will not let me clock over 1200! any ideas?

protoism said:
yay have root thanks Dan. Have shown my appreciation hope other do as well.
I think this means we need our own forum or at least a sub forum. Next stop that pesky bootloader.
Seperately having trouble with set cpu will not let me clock over 1200! any ideas?
Click to expand...
Click to collapse
To overclock you must have a custom or tweaked kernel.

redundant post, please ignore

Bye bye VZW bloat!

[Announcement]Streakdroid.com and Dev-Host

Announcement:
Streakdroid.com has had DNS issues in the past, as such I no longer host my files on it.
If and when DJ_Steve decides to come back and reassess the situation concerning the streakdroid.com servers, I will be hosting all my files on Dev-Host.
Click to expand...
Click to collapse
Dev-Host Link:
<Dev-Host>
Click to expand...
Click to collapse
Files Mirrored on Dev-Host:
All files that I have personally released are already mirrored on Dev-Host
Most streakdroid related files released by DJ_Steve
Click to expand...
Click to collapse
Notices:
My Dev-Host mirror does not have every file related to the Streakdroid roms, if it is not there, then I likely never had it and no longer have access
Any files that I have directly made and are missing, feel free to ask for a remirror
Click to expand...
Click to collapse
Credits:
DJ_Steve for providing hosting space on Streakdroid.com and making the Streakdroid roms
Dev-Host for providing hosting space for all XDA Recognized Developers/Contributors/Themers
XDA for being XDA
Click to expand...
Click to collapse
2char

[ROM][R2] HoneyStreak HD7 2.0 RELEASE 2(3.2)
Could you please post this? I am new to the scene and it has been hard to get started with this issue. Thank you so much!!!!

Is it
mirror2.streakdroid.com/honeycomb/Streakdroid-HD7-2.0R2.zip and
mirror2.streakdroid.com/honeycomb/Streakdroid-HD7-2.0R2-wifionly.zip ?
Some of the Honeystreak files are named confusingly, uploading those ones right now
Uploaded:
Streakdroid-HD7-2.0R2.zip
Streakdroid-HD7-2.0R2-wifionly.zip

that worked!!! I am all upgraded and ready to go. thanks again.

jb2326 said:
that worked!!! I am all upgraded and ready to go. thanks again.
Click to expand...
Click to collapse
good for you :good:

350 recovery.img
can you post this please when u have time

recovery(350).img

You can grab my TWRP ports and put them in your dev account,
also, I'll try to get a copy of ICS-B4 over to you.

I'll add them to my devhost soon, i'm going to change the filenames to be more consistant with my CWM naming scheme though for TWRP.
It's simply TWRP_<device>_<build date>.<extension>
with <device> being S7
and <build date> being YYMMDD.
All my CWM ports are named like that and I always use YYMMDD for my build dates.
The ICS beta zips I'll leave as is, there's no reason to change those
Speaking of ICS, wondering when a version for stock partition layouts will ever be available.
Really likin ICS on my S5, but I dont wanna repartition my S7

In the process of uploading everything over to devhost.
Currently have all PKGs and FFUs I have uploaded.
I was wrong about custom rec file names, it's
<Device>_<bootloader>_<rec version>_<revision letter>.img
with bootloader only currently being valid on the S7 (either 2.2 or 3.2)
so I'm not currently sure how I'm gonna name the TWRP imgs, but as they already have a working mirror i'll leave it for the time being.

Any chance I could get the recovery for the LG7_514_21700_30.pkg ? It would be appriciated, sorry for the PM it has been awhile since I needed to navigate the forums and get help.

So I have no idea what is going on, streakdroid.com was back up for the weekend but all our data was gone. But now I can't even access it.

I dont know, mirror2.streakdroid.com is still intact and I can still access all my files and steve's files on it.
Is there anything you need immediately?

TheManii said:
I dont know, mirror2.streakdroid.com is still intact and I can still access all my files and steve's files on it.
Is there anything you need immediately?
Click to expand...
Click to collapse
Hi Manii,
Can we have the recovery.img for the build Streak_351_15609_00.pkg and Streak_360_17397_00.pkg
Thanks in advance,
JV

already on mirror

TheManii said:
already on mirror
Click to expand...
Click to collapse
Unfortunately I still cannot access mirror2 only Dev-Host. Is there a workaround or like a super-secret password to access mirror2.streakdroid.com?
P.S. I'm new to the Streak community but did notice that you did a lot of work for us mere mortals. Really appreciate it Manii

juventusventus said:
Unfortunately I still cannot access mirror2 only Dev-Host. Is there a workaround or like a super-secret password to access mirror2.streakdroid.com?
P.S. I'm new to the Streak community but did notice that you did a lot of work for us mere mortals. Really appreciate it Manii
Click to expand...
Click to collapse
i wonder what happen.. because i click the link once... and i can download it immediately... tried that on other link as well... and same thing happen...

I have nearly completed mirroring everything onto devhost.
Soon I will update all the links to there.
After that, I will likely no longer update mirror2.streakdroid.com/manii.
The files that are already there will remain, and if the dns issue clears up it will again be accessable.

Please test and confirm website is back up. I resolved DNS issues.

StreakDriod HoneyStreak HD7 2.0 R8 For Dell Streak 7 4G
PLS CAN YOU UPLOAD THE ZIP FILE StreakDriod HoneyStreak HD7 2.0 R8 For Dell Streak 7 4G