Database Users

[Radio] [Leak] Official MR2 Radio 1.39.00.0508w, 0.01.69.0510w_3

So after all that chaos that happened a few days ago here it finally is. I would personally like to thank all of you guys that were sensitive to the situation and refrained from downloading, flashing, and or distributing this radio when it was stolen and pre-maturely leaked. Good things always come for those who wait.
This radio will ONLY work on our Gingerbread build!!! IT WILL NOT WORK WITH FROYO (The MR1).
Download
MD5: 4072b5954bf0032103b62c5ae69cb13e
Approx. 26 MB​
This radio has shown significant improvements in multiple areas and seems to cure the reboot issue a lot of us were experiencing on GB.
Instructions:
1. Download and rename to PG05IMG.zip
2. Place on root of SD card
3. Flash from hboot
Enjoy!
Note: This radio does not mean that Gingerbread is near. It actually is no where close. This radio was pulled from the MR2 which is also Froyo. The reason why this works with Gingerbread is because it is using the same RIL as the MR2. The MR1 uses an outdated RIL which is why this radio will NOT work with it.

Thanks! can you post the MD5 please?

Its running GREAT so far

Thank you very much to all the devs for the hard work.

One of us will drop the full RUU this came from in a bit, there are some things in the famework we are looking at first.

Download link not working after "skip ad"
Not Found
The requested URL /mching715/Gingeritis/(MR2)PG05IMG.zip was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

says it is down for me

kriskmk said:
Download link not working after "skip ad"
Not Found
The requested URL /mching715/Gingeritis/(MR2)PG05IMG.zip was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Click to expand...
Click to collapse
Yeah same for me.

"This radio will ONLY work on our Gingerbread build" ... does that mean the Gingeritis ROM only, or the leaked build all the GB ROMs are based off of? Sorry for such a stupid question lol

jcase said:
One of us will drop the full RUU this came from in a bit, there are some things in the famework we are looking at first.
Click to expand...
Click to collapse
Sweet...this is what I'm waiting for. Thanks guys (chingy and jcase!)

Mustang02 said:
Yeah same for me.
Click to expand...
Click to collapse
It is working now!..

kriskmk said:
Download link not working after "skip ad"
Not Found
The requested URL /mching715/Gingeritis/(MR2)PG05IMG.zip was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Click to expand...
Click to collapse
opps. give it 30 sec. i uploading to the wrong folder on my ftp.

whats the size? 14.7mb?

Wonder how soon the GB OTA will be then

burkett375 said:
Thanks! can you post the MD5 please?
Click to expand...
Click to collapse
It's right under the Download link.
MD5: 4072b5954bf0032103b62c5ae69cb13e

YankInDaSouth said:
"This radio will ONLY work on our Gingerbread build" ... does that mean the Gingeritis ROM only, or the leaked build all the GB ROMs are based off of? Sorry for such a stupid question lol
Click to expand...
Click to collapse
this............10 char

kriskmk said:
It is working now!..
Click to expand...
Click to collapse
make sure you check the md5. you might not have gotten the full download as it was still uploading when a few of you grabbed it!!

Everyone getting 404ed, keep trying, it's just getting bombarded with people trying to download.

scook9 said:
Wonder how soon the GB OTA will be then
Click to expand...
Click to collapse
gb ota is no where near.

ilogik said:
whats the size? 14.7mb?
Click to expand...
Click to collapse
24.78 Meg.

[PATCH] Fix Arabic [RTL] on GB 4.5.91

Hello there
I have managed to get fix Arabic on GB 4.5.91, through patching and compiling framework.jar and libwebcore.so.
This will work on every rom that is based on AT&T 4.5.91.
Here is how to patch your phone:
Manually
1) Be sure that your phone is Rooted and Deodexed.
2)Download GBArabic.zip attached and extract it on your phone.
3)Now using Root Explorer or any other root file mangers.
Copy framework.jar to /system/framework/ and fix the permissions
Copy libwebcore.so, libicuuc-arabic.so and libandroid_runtime.so to /system/lib/, and fix the permissions
Be sure that you set permission for all, or you will stuck in bootloop.
4) Reboot and enjoy.​
or
CWM Flashable File
1) Be sure that your phone is Rooted and Deodexed.
2)Download CWM-Arabic.zip attached and place it on your phone.
3)Boot into the recovery, and flash the file.
4) Reboot and Enjoy ​
p.s.
I am quite new here in the forum. So I couldn't post this on the Dev Forum.
Credits:
madmack- for his framework patcher.
Ayman Al Sanad- for his source code libwebcore.
Motorola- for source code
My Computer- for taking so much time compiling .

Changes
Changes:
7/29/2011:
Added CWM zip file

Arabic Files for CherryBlur v1.4d Rom ( it's based on ORFR and not working with At&t)
http://www.mediafire.com/?zd93z9leslz6wtc ... tested by me

Thanks Jack,
Does the Browser and Gmail show Arabic correctly in ORFR?
If it worked, I will update my post.
If not, could try and use my libwebcore.so on your phone, and report back to me?

no it's doesn't support the browser
and sorry I changed the rom and can't test the new files

Successfully Installed - CWM Version
Just flashed the CWM file. Working on Alien ROM.
Works perfectly (RTL needs some alignment "observed in Facebook App only"). Donation is on the way! Extra ordinary work and Cheers!

droidace said:
Just flashed the CWM file. Working on Alien ROM.
Works perfectly (RTL needs some alignment "observed in Facebook App only"). Donation is on the way! Extra ordinary work and Cheers!
Click to expand...
Click to collapse
Glad to hear that, it worked with you.
As for the Facebook App, I can't really help as I do not use the app .
Anyway,
Thank you, and I hope you enjoy it.
and
Ramdhan Kareem

copied the files manually while half asleep, seems that I've messed up ... was stuck in the boot screen, downloaded the automated installation file, applied it and now it works perfectly !
RTL is still not right in gmail messages, but that's super low priority

suleiman.aql said:
copied the files manually while half asleep, seems that I've messed up ... was stuck in the boot screen, downloaded the automated installation file, applied it and now it works perfectly !
RTL is still not right in gmail messages, but that's super low priority
Click to expand...
Click to collapse
What you did wrong the first time, is that you haven't set up the permission, but hey you were half sleep I won't blame you .
I just noticed the alignment of Gmail, and droidace says it happen on Facebook.
It seems that these two apps, use different files to show alignment than the browser.
I will take a look at it.
Thanks for reporting, and hope you enjoy it.

How to donate? - not really much though

droidace said:
How to donate? - not really much though
Click to expand...
Click to collapse
Thank you for the extreme generosity, I really appreciate it.
As for now, I really don't need any donations, I'm sure some people may need them.
Thanks very much, though

How did you update to 4.5.91 ? official update, SBF, OTA, other ? I am still not sure what's the safest way to go to .91 with everyone warning about bricks on this forum
how did you root/deodex ?
Sorry for my dump questions if they sounded so, But i am new into this coming from the iOS land and overwhelmed with all the terms
Thanks mdd5

Hello Ramy, and welcome.
Since you are new here, I will encourage to take a look at THE BEGINNERS (N00B) GUIDE!!!
http://forum.xda-developers.com/showthread.php?t=1154600
Now to answer your questions,
ramy_Maia said:
How did you update to 4.5.91 ?
I did update to 4.5.91, by unlocking the bootloader and flashing one of the roms here on dev section, not official.
I am still not sure what's the safest way to go to .91 with everyone warning about bricks on this forum
Everything is safe as long as you follow the guide.
many of the bricks happen here is because people updated to .91 using official then tried sbf to an older version.
When you update using official, you can't flash an older version.
how did you root/deodex ?
As of now, the only way to have root and deodex on .91 is by flashing unofficial ROMs
So you will need to unlock the bootloader and flash one.
Sorry for my dump questions if they sounded so, But i am new into this coming from the iOS land and overwhelmed with all the terms
Your question are not dumb, I was just like a couple of weeks ago.
However, it is better to ask questions like this in Atrix 4G Q&A forum, so you get better answers and faster than here. You can also use search
Thanks mdd5
Click to expand...
Click to collapse
Thanks, and I hope I helped you a little.

Thanks for the tips, i will go through the links

Alright Good Luck,
Did the new update of facebook fixed that issue?? It seems that it is fixed now.

mdd5,
I picked up your comment on my blog and I wanted to let you know that I added your Atrix GB libwebcore.so to my blog with a special note to you. If you would mind that for any reason, please let me know and I'll remove the link and recompile the sources myself.
Great work. I'm glad to see people using my blog and the sources to get Android arabized

Options of Arabic Fonts
Not really sure if there is an option to change the Arabic fonts? Any ideas?
Awesome work anyway with or without fonts

Thank you for your effort
In Alien Rom, Does it work for Write & Read or full (with menus)?
same question in Cherry Rom.

madmack said:
mdd5,
I picked up your comment on my blog and I wanted to let you know that I added your Atrix GB libwebcore.so to my blog with a special note to you. If you would mind that for any reason, please let me know and I'll remove the link and recompile the sources myself.
Great work. I'm glad to see people using my blog and the sources to get Android arabized
Click to expand...
Click to collapse
Thanks to you for providing the sources, and keep it up.
As for for the compiled lib, I wouldn't mind posting it.
It's all because of you blog, I was able to do this.
Thanks again.
droidace said:
Not really sure if there is an option to change the Arabic fonts? Any ideas?
Awesome work anyway with or without fonts
Click to expand...
Click to collapse
There is several fonts available on the Internet, I don't have any right now.
I will post it on here whenever I find one.
Ferasalsubhi said:
Thank you for your effort
In Alien Rom, Does it work for Write & Read or full (with menus)?
same question in Cherry Rom.
Click to expand...
Click to collapse
Right now, it is Write and Read only, (without the menus).
This patch will work on every rom that is based on AT&T 4.5.91.

mdd5 said:
There is several fonts available on the Internet, I don't have any right now.
I will post it on here whenever I find one.
Click to expand...
Click to collapse
So guide me here, all that I need is to find the desired font and then (Rename it to "DroidSansArabic" and replace it with the one in /system/fonts?

[Q] .141 Update linked, Thanks! (I Need a hard-bricked Atrix, read this)

====In need of donations!!!====​Also, I'm in need of a Hard-bricked Atrix. Sorry but I don't have any money to spend right now, so I'm looking for donations. This might help with the development of the ROM (Very much speed up the time it will take and testing) if I can get it to work. The most I probably can give you are credits in the ROM (literally, I will add your name to the notices that come up when you flash the zip, and on the forum page) and a copy of the pre-release version (Stable or Unstable you decide). Please PM me!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Solved! Thanks guys! Turns out that the set x.xxxx code had to do with the orange status bar, and Dark linked me to the 4.5.141 files... All that still remains is above...
Download the new 4.5.141 IMG's here: http://atrix.tk/4.5.141/
READ THIS BEFORE DOING ANYTHING WITH THE NEW UPDATE! You have been warned!

Come on guys, please at least help with the updater script!

http://forum.xda-developers.com/showpost.php?p=22379866&postcount=393

johng75 said:
http://forum.xda-developers.com/showpost.php?p=22379866&postcount=393
Click to expand...
Click to collapse
Thanks but it says not to flash to a device with an unlocked bootloader. Not taking any changes. Was hoping for the boot & system .img files...
Also I figured out the set x.xxxxx thing. It's for the orange loading bar. lol.

Alaq said:
Thanks but it says not to flash to a device with an unlocked bootloader. Not taking any changes. Was hoping for the boot & system .img files...
Also I figured out the set x.xxxxx thing. It's for the orange loading bar. lol.
Click to expand...
Click to collapse
You can find both here:
http://atrix.tk/4.5.141/

Dark9781 said:
You can find both here:
Boot.img
http://www.mediafire.com/?3sfvnp4tpbccreb
System.img
Uploading
Click to expand...
Click to collapse
Thanks I already downloaded them from atrix.tk

If you need a hard bricked Atrix, I got one. Its useless to me since I already bought another one, and use a Galaxy S II now anyways. I think the digitizer might be faulty as it sometimes does not feel like working unless you turn the screen off a few times, then it works perfectly.
Sent from my Acer Iconia A500 using xda premium

SM-T3300NU?? Help?? INFO??

i see there are no SM-T3300NU roms but i did make one in (Cygwin) kitchen on windows 7 ultimate 64bit but i'm still scared to flash it because it is my first rom ive made and i just bought this device and its sooo cool im trying to reach out to others and get some advice on what i should do to see if this rom works or if someone like to try it.
It is a pre-rooted rom with busybox and i made it from the devices firmware (NK1) im also reaching out to devs too because im trying to learn to make roms and apps and i think im doing a great job so far but i guess i need a bit of a push perhaps a mentor or tutor of some sort please if you have any input or help for what im doing here please leave a comment in this tread TY in advance
============================================================================================================================
I just realized i put this in the wrong area i meant to put it in the general discussion area and im not sure how to delete it from here so i can move it to the right place if someone can let me know that too that would be great ty and sorry.
============================================================================================================================
https://drive.google.com/open?id=0B9AsH1UN4cOTNjVyZ2l3bW9jdVU&authuser=0

dont be scared - flash the ****!
if you leave the bootloader untouched, it cant get bricked.

sub77 said:
dont be scared - flash the ****!
if you leave the bootloader untouched, it cant get bricked.
Click to expand...
Click to collapse
LOL!!
what exaclty is the bootloader? and how can i check if i did leave it untouched?
sry still in training
btw can you maybe look at the rom i made and tell me what ya think if you know about these things?

mrdreamers said:
LOL!!
what exaclty is the bootloader? and how can i check if i did leave it untouched?
sry still in training
btw can you maybe look at the rom i made and tell me what ya think if you know about these things?
Click to expand...
Click to collapse
I forget exactly what the bootloader file was called but your zipped rom should contain boot.img and a few folders like system, bla bla bla. To make sure, be sure that in your updater script, contains the correct mounting points/partition points so the zip rom can flash the stuff into the right areas. As long none of those mounting/partition stuff isn't leading to the bootloader. I would ask an Dev regarding those mounting points. I assume you ran this through a kitchen correct?
-DUHA

upload it so we can test it
if you wanna help lol

Dude..., Dude ?!? Dude ?!?!?!?!
sm-t330nu bootloader is @
/dev/block/mmcblk0p3 sbl1
[i think] xD
there is no way you could possibly overwrite that with any rom build/mod , unless of course you are
a world class dummy. And since there are no dummies anywhere on XDA [ ... EVER !!! ] :silly:
There's no need to worry right ?????????
m
IT's FINALLY SPRING !!!

DUHAsianSKILLZ said:
I forget exactly what the bootloader file was called but your zipped rom should contain boot.img and a few folders like system, bla bla bla. To make sure, be sure that in your updater script, contains the correct mounting points/partition points so the zip rom can flash the stuff into the right areas. As long none of those mounting/partition stuff isn't leading to the bootloader. I would ask an Dev regarding those mounting points. I assume you ran this through a kitchen correct?
-DUHA
Click to expand...
Click to collapse
yes i used Cygwin kitchen in dos on windows 7 ultimate 64bit and ty for the info.

emoboy (Official Name!) said:
upload it so we can test it
if you wanna help lol
Click to expand...
Click to collapse
how do i upload the rom here?
it be the first time ive uploaded a rom here

moonbutt74 said:
Dude..., Dude ?!? Dude ?!?!?!?!
sm-t330nu bootloader is @
/dev/block/mmcblk0p3 sbl1
[i think] xD
there is no way you could possibly overwrite that with any rom build/mod , unless of course you are
a world class dummy. And since there are no dummies anywhere on XDA [ ... EVER !!! ] :silly:
There's no need to worry right ?????????
m
IT FINALLY SPRING !!!
Click to expand...
Click to collapse
hey moon you think you might take a look at it?
and ill check the path you and DUHAsianSKILLZ gave me but he says i need to know the mounting points how do i go by doing that or getting those?

mrdreamers said:
how do i upload the rom here?
it be the first time ive uploaded a rom here
Click to expand...
Click to collapse
588 posts since 2009 and you dont know how to upload a file?????????
omg

mrdreamers said:
hey moon you think you might take a look at it?
and ill check the path you and DUHAsianSKILLZ gave me but he says i need to know the mounting points how do i go by doing that or getting those?
Click to expand...
Click to collapse
M,
create an account at androidfilehost and apply for developer status so you
can upload there, or upload it to google drive or mega. I'd need to see what it
is you are actually working on. @sub77 makes a good point, if you won't
test out your own work then why get into it? You would be well served, as emoboy
does a lousy job of getting across, to suspend further question and do more
reading, reading, reading, especially my posts for a wonderful mix of lame humour,
dumb questions, insightful remarks, astute observations, bad spelling, and even
worse language in some situations ! xD
emoboy (Official Name!) said:
588 posts since 2009 and you dont know how to upload a file?????????
omg
Click to expand...
Click to collapse
Kid, your 15, i'd think confusion goes with the territory. Be snarky if you must, but, be helpful
while your at it. Savvy?
m
BTW this thread belongs in q&a.

@mrdreamers if you want......send me the updater-script and your partition layout (via PM or on my hangouts.....its my email in my profile) and I'll take a look at it.

emoboy (Official Name!) said:
588 posts since 2009 and you dont know how to upload a file?????????
omg
Click to expand...
Click to collapse
i should have explained i do know how but its just when i do it it crashes and says web page not available, any ideas why it does this?

g_ding84 said:
@mrdreamers if you want......send me the updater-script and your partition layout (via PM or on my hangouts.....its my email in my profile) and I'll take a look at it.
Click to expand...
Click to collapse
Kool! TY sooo much!!
can you tell me where in the rom i would find these?
Update: found updater-script
looking for the other right now.

mrdreamers said:
i should have explained i do know how but its just when i do it it crashes and says web page not available, any ideas why it does this?
Click to expand...
Click to collapse
I would imagine because the filesize is too big, XDA has filesize limits for different file types, and I can't imagine an entire rom zip being smaller than the cut-off. Moonbutt74 is right (protip, he always is and even on the rare occasions he isn't he's still much cleverer than you or me), upload it to android file host (you do have to request developer status, but they should approve it within like an hour or two max iirc) or google drive if you're really too impatient to wait for android file host

mrdreamers said:
i should have explained i do know how but its just when i do it it crashes and says web page not available, any ideas why it does this?
Click to expand...
Click to collapse
plz f*** me and click on upload and choose the file you want to upload on your google drive account... thats it !!! lol

thisisapoorusernamechoice said:
I would imagine because the filesize is too big, XDA has filesize limits for different file types, and I can't imagine an entire rom zip being smaller than the cut-off. Moonbutt74 is right (protip, he always is and even on the rare occasions he isn't he's still much cleverer than you or me), upload it to android file host (you do have to request developer status, but they should approve it within like an hour or two max iirc) or google drive if you're really too impatient to wait for android file host
Click to expand...
Click to collapse
TY for that , how do i request dev status?

mrdreamers said:
TY for that , how do i request dev status?
Click to expand...
Click to collapse
Assuming you've already made an account and are logged into it, there is a drop-down menu on the upper right-hand corner of the page that should say, "Hey, <yourusername>" Click it and select settings. The fourth setting down under user settings > my preferences should be called "request developer/upload access", that's the one you're after

emoboy (Official Name!) said:
plz f*** me and click on upload and choose the file you want to upload on your google drive account... thats it !!! lol
Click to expand...
Click to collapse
im uploading it now on my google drive
how do i link it to this thread when it's done uploading?
also before i do i need to get dev status right?
but i need to find out how to request that as well.

mrdreamers said:
im uploading it now on my google drive
how do i link it to this thread when it's done uploading?
also before i do i need to get dev status right?
but i need to find out how to request that as well.
Click to expand...
Click to collapse
You need dev status for android file host, not google drive. When making posts use the Insert Link button to link to your upload links. Any file uploaded to your google drive that you allowed to be shared with the public should have its own URL. Any file you upload to android file host will definitely be given its own url. You can copy/paste that url into Insert Link into your post/thread

Have you done a backup for TWRP and did you notice?

So I decided to run a quick backup of the phone system files with TWRP and I noticed that it has a system_image.emmc.win file that are 6GB in size. My question is this. Is this a complete image of the phone's base setup so when things go south we can use this file to go back to? Or is it something else??

swehes said:
So I decided to run a quick backup of the phone system files with TWRP and I noticed that it has a system_image.emmc.win file that are 6GB in size. My question is this. Is this a complete image of the phone's base setup so when things go south we can use this file to go back to? Or is it something else??
Click to expand...
Click to collapse
Can you share your backup with me? I just brink my phone and really need to install the system again. I think a lot of people are also having the same problems as me.

warofhero said:
Can you share your backup with me? I just brink my phone and really need to install the system again. I think a lot of people are also having the same problems as me.
Click to expand...
Click to collapse
What files do you need? The big base image is 6GB big.

swehes said:
What files do you need? The big base image is 6GB big.
Click to expand...
Click to collapse
I think I found some backups that was posted by jcadduono, https://idlekernel.com/flash-tools/firmware/ailsa_ii_A2017U/B20/
I see a lot of backups which one should I use to reinstall the OS? DO i need to install them all or just system.img only?

To the best of my knownledge, you don't want or need that system.img in your backups. I know on my nexus 6p you don't use it. big waste of space. Perhaps something a dev needs???

Barsky said:
To the best of my knownledge, you don't want or need that system.img in your backups. I know on my nexus 6p you don't use it. big waste of space. Perhaps something a dev needs???
Click to expand...
Click to collapse
I would think that big image file would be the image used for a factory reset with all the program, system file and such so they can just reset it quick and easy. And if that is the case, wouldn't that be what is needed by the devs?

swehes said:
I would think that big image file would be the image used for a factory reset with all the program, system file and such so they can just reset it quick and easy. And if that is the case, wouldn't that be what is needed by the devs?
Click to expand...
Click to collapse
Hmm the files that I just downloaded are not working. It gives errors maybe I did something wrong.
Can you send me your system image 6 GB file? Thank you

warofhero said:
Hmm the files that I just downloaded are not working. It gives errors maybe I did something wrong.
Can you send me your system image 6 GB file? Thank you
Click to expand...
Click to collapse
I'm uploading it to my dropbox right now. It is estimated to take about 5 hrs.

swehes said:
I'm uploading it to my dropbox right now. It is estimated to take about 5 hrs.
Click to expand...
Click to collapse
Thank You so much

warofhero said:
Thank You so much
Click to expand...
Click to collapse
I'm currently over my quota so I hope this one works
HERE

People should not mess around with things they don't know how to fix... why did you even attempt to do any mods and not have a clue how to do a restore?

swehes said:
I'm currently over my quota so I hope this one works
HERE
Click to expand...
Click to collapse
Thank you. You are the best.
Updated: Work great, I got my phone working again. Thank You very much. I really appreciate your help especially the time you took to upload this huge file. Thank You again.

warofhero said:
Thank you. You are the best.
Updated: Work great, I got my phone working again. Thank You very much. I really appreciate your help especially the time you took to upload this huge file. Thank You again.
Click to expand...
Click to collapse
Out of Curiosity. Was it an image of b20_boot? or was it the factory image?

swehes said:
Out of Curiosity. Was it an image of b20_boot? or was it the factory image?
Click to expand...
Click to collapse
YES, It is an image of B20. Thank you bro.

nickcaper said:
People should not mess around with things they don't know how to fix... why did you even attempt to do any mods and not have a clue how to do a restore?
Click to expand...
Click to collapse
That's not how it went down. He inadvertently wiped system. And he did know how to fix it, he just didn't have the resource that he needed at hand and was asking for it. What, you've never made a misstep while working on something?
Always thank those who are helpful...and just ignore those who aren't.

tdgillihan said:
That's not how it went down. He inadvertently wiped system. And he did know how to fix it, he just didn't have the resource that he needed at hand and was asking for it. What, you've never made a misstep while working on something?
Always thank those who are helpful...and just ignore those who aren't.
Click to expand...
Click to collapse
sure we all make mistakes but ... he dont have any way to flash the phone back as of now. I have yet to see the tool released to re-flash the phones original rom in case the phone gets bricked.

swehes said:
I'm currently over my quota so I hope this one works
HERE
Click to expand...
Click to collapse
You don't happen to still have this file around? Was it captured after a bootloader unlock or using tenfar's method?

jkuczera said:
You don't happen to still have this file around? Was it captured after a bootloader unlock or using tenfar's method?
Click to expand...
Click to collapse
I do have the file. However my dropbox cancelled my public shares due to excessive traffic.

swehes said:
I do have the file. However my dropbox cancelled my public shares due to excessive traffic.
Click to expand...
Click to collapse
I'm pretty surprised that such an important file isn't already widely available. I expected easy unlocking/rooting and custom ROMs at this point. Has this phone not been available for a while now in the US? What's holding everything back?
Anyway, if you could somehow make that file available again I'm sure I wouldn't be the only grateful one.

swehes said:
I do have the file. However my dropbox cancelled my public shares due to excessive traffic.
Click to expand...
Click to collapse
Any other place you can upload it to? It might be the only way for the bootloader unlocked group to get future updates (if it was captured without b20_boot).