[Q] What To Do If Unable To Boot After Flashing - Fascinate General

Hello,
Thanks to all the devs and folks in the forums for all their hard work and dedication to the Fascinate Cause. I am currently stuck...I went to flash the latest [ROM]DL09 Super Clean 0.4/EB01 2.2!! *UPDATED* and all was good.
Then I went to update the EB01 Modem via Odin and unchecked the Auto Reboot option because I wanted to go back and update CWM. Odin came back with an Error (did not record said error) and did not complete so I tried again with the Auto Reboot option checked. A message popped up on the Fascinate, however I did not record that message either.
I am now stuck with the following:
1. If I have the battery in and the USB cable inserted into the Fascinate and the computer (PC) the phone comes up in "Android system recovery <2e>, Samsung Recovery Utils - for BML -. I am able to use the Volume keys to scroll up and down the available options (reboot system now, apply sdcard:update.zip, wipe data/factory reset, wipe cache partition) but when I press the Power Button nothing happens...
(Update: OK, after reading through other Posts I realized that in this situation you have to press the Home Key...you press the Power Button when in CWM)
it lets me do the Factory Reset, Wipe Data, and such but it comes back with the same thing...
2. If I have phone disconnected from PC with battery inserted and press the Power Button I get a Phone, two dots, a yellow Caution Triangle with "!" in the middle, two dots and a PC.
I should have left well enough alone...I realize now that I could/should of flash via CWM instead of Odin. I really hope I did not "Brick" my phone as it was getting pretty neat with all the work you and all the other devs have been doing.
Any help you can provide would greatly be appreciated.
Thank you,
LJackson10

I would restore the backup you took when you started, and if need be, odin back to DL09.
If you did not start with a backup - you will likely need to odin back to DL09 and re-flash Super Clean 0.4.
Did you use the PDA button?

It's been my experience to flash modems first then the rom. Especially when the rom you use i'd based off of another modem. Odin back to dl09 and work up.

If you are unable to get into CWR then you need to flash the file in this thread via Odin and then folow the steps I have written below (if you can get into CWR then just skip to the last paragraph):
http://forum.xda-developers.com/showthread.php?t=911677
Note that after flashing the above you will need to follow the instructions in this post as well:
http://forum.xda-developers.com/showthread.php?t=913470
After the above is completed (or if you are already able to access CWR), connect your phone to your pc with the battery removed. Get into download mode by pressing the down volume button and open up Odin and flash the EB01 moden using the PDA button. Let the phone reboot afterwards. Then boot into recovery and flash the Super Clean ROM.
Hope this helps.

Related

Unable to reset to factory settings, format memory, flash ROM, etc.

Hi,
My I9100 behaves quite strange.
I am unable to perform factory reset (using code from keypad or command from settings menu) - the phone reboots, goes into recovery mode where I can select wipe data/cache. Doing so has no effect on my phone, after another reboot the I9100 restarts in the same state as before factory reset.
The other thing is that I am unable to format interal memory. After using command from settings menu it says that memory is disconnected, formated, and after that all data (pics, mp3s, etc) are still available.
Also I am unable to flash ROM with any stock (tried KE4 and KE7) or aftermarket (Lightening) software. I tried Odin with and without PIT/Re-partition, also with no effect. The phone boots into previous state nevertheless confirmation in Odin that flashing completed successfully.
And the most aggravating thing is that after I reboot phone I am loosing all the recent data. The phone is booting in the state from before couple of days, with no recent messages etc. Thanks to Google account sync, the mail, calendar and so on re-sync properly, but it is no good solution since pictures, todos etc are gone after reboot.
I believe the thing started to occur after unsuccessful update to Twitter. Tried to do Market cache wipe (as suggested for similar cases to I9000 users), but also to no effect.
Have you any suggestion what else can I do?
strideer said:
Hi,
My I9100 behaves quite strange.
I am unable to perform factory reset (using code from keypad or command from settings menu) - the phone reboots, goes into recovery mode where I can select wipe data/cache. Doing so has no effect on my phone, after another reboot the I9100 restarts in the same state as before factory reset.
Power off .
Go to recovery mode
Hold down menu button + Volume UP + Power button
at splash screen release menu volume then power button .
In the recovery screen find wipe data factory reset and apply .
jje
Click to expand...
Click to collapse
JJEgan said:
strideer said:
Hi,
My I9100 behaves quite strange.
I am unable to perform factory reset (using code from keypad or command from settings menu) - the phone reboots, goes into recovery mode where I can select wipe data/cache. Doing so has no effect on my phone, after another reboot the I9100 restarts in the same state as before factory reset.
Power off .
Go to recovery mode
Hold down menu button + Volume UP + Power button
at splash screen release menu volume then power button .
In the recovery screen find wipe data factory reset and apply .
jje
Click to expand...
Click to collapse
As I said - that doesn't work for me.. :-(
Click to expand...
Click to collapse
Stuck in boot loop - No Recovery mode but can flash using download mode
I am stuck in bootloop. I cant access recovery using Vol Up + Home + Power but I can access Download mode and flash roms using ODIN. But no use. Everytime its stuck in boot loop and either the initial boot logo flashes or it stays stuck at the boot logo. Can please someone help. I read all the comments and lot of people having problem being able to get into Download mode but not in Recovery Mode. I would appreciate if someone can post a detailed response as to how to get rid of this issue.
imran077 said:
I am stuck in bootloop. I cant access recovery using Vol Up + Home + Power but I can access Download mode and flash roms using ODIN. But no use. Everytime its stuck in boot loop and either the initial boot logo flashes or it stays stuck at the boot logo. Can please someone help. I read all the comments and lot of people having problem being able to get into Download mode but not in Recovery Mode. I would appreciate if someone can post a detailed response as to how to get rid of this issue.
Click to expand...
Click to collapse
Wipe data and cache from recovery then flash a rom, you will lose everything not backed up
There is a guide about howto fix this, search first next time
Sent from my GT-I9100 using XDA Premium App
im sure there is another thread around he with 2 people in it that had the same problem as you, flashing via odin or cwm and then still ending up with the same firmware as pre flash.
i'll see if i can spot it and post it here, i dont know if they got it sorted or not tho.
veyka said:
Wipe data and cache from recovery then flash a rom, you will lose everything not backed up
There is a guide about howto fix this, search first next time
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Mr. veyka perhaps i didn;t drive my point home. Recovery mode is inaccessible. I cant wipe unless i get into recovery. its simple logic. i need to be able to access recovery before i can wipe
@ OP
http://forum.xda-developers.com/showthread.php?t=1178964
That is the thread that i had read which had the same problem as you, i havent read it all but the last few pages tend to lean towards that flash lock go ticked when flashing a ROM via odin.
imran077 said:
Mr. veyka perhaps i didn;t drive my point home. Recovery mode is inaccessible. I cant wipe unless i get into recovery. its simple logic. i need to be able to access recovery before i can wipe
Click to expand...
Click to collapse
Hey bud,
If you can get in to download mode then it should be ok, id try 2 things.
Go over to the the original android dev section and grab the CF kernel that was for the firmware installed, boot in to download and flash it via pda in odin, then try recovery again.
If that doesnt work, then download a full firmware from samfirmware and flash the main 3 files (Modem/CSC/Phone) and that should set your phone back to retail fresh.
ofc another reason could be your volume up button is broken
imran077 said:
Mr. veyka perhaps i didn;t drive my point home. Recovery mode is inaccessible. I cant wipe unless i get into recovery. its simple logic. i need to be able to access recovery before i can wipe
Click to expand...
Click to collapse
Oh, sorry, missed that, my bad
As said, flash cf root and see if that helps, if not check that your volume up key works within the os, if not flash to stock, and reset flash counter with a jig and send in for repairs.
If it does, cf root comes with an app called cwm manager that will allow you to reboot into recovery that way.
Sent from my GT-I9100 using XDA Premium App
Crucio_ said:
Hey bud,
If you can get in to download mode then it should be ok, id try 2 things.
Go over to the the original android dev section and grab the CF kernel that was for the firmware installed, boot in to download and flash it via pda in odin, then try recovery again.
If that doesnt work, then download a full firmware from samfirmware and flash the main 3 files (Modem/CSC/Phone) and that should set your phone back to retail fresh.
ofc another reason could be your volume up button is broken
Click to expand...
Click to collapse
my volume up button works> the reason being you need to press volume up to get into download mode after the Vol down + home + power combo.
There are other people who have had this issue of recovery not available.

[TUT][i9001] HOW TO UNBRICK YOUR SOFTBRICKED I9001

Soft bricking often happens in when you try to install a ROM which is not optimized for your phone e.g:Installing i9100 SII ROM on your i9001.
Here is a basic tutorial on how to unbrick a i9001.
Requirements:
For unbricking your phone you are going to need these:
1.An official Samsung firmware
2.ODIN downloader
3.AriesVE.ops for ODIN usage.
4.USB cable
5.Samsung KIES drivers installed
6.Patience!!!
OK.first of all you need to check things above and make sure you have them all.
Fortunately when your phone is soft bricked(when soft bricked your phone doesn't boot into the OS And instead of that you'll see picture of a phone connected to a computer and on the connection line there's a warning sign) can get yo the download mode. So first get your phone in download mode by pressing this button combination: volume down+ home key+ power button
So then get set to use ODIN.
Connect your phone to the PC and make sure you have installed drivers and also killed every KIES process.(If you have done well till now you can see one black gets yellow and in Terminal you'll see 2 lines "detected","added") So start ODIN and place AriesVE.ops as the ops file then use your official firmware (extension should be like this |..... .tar.md5|).To get your firmware working tick "one package" and place you "MD5" file in "one package" location. Then after MD5 checking start the process and go grab a beer.
Wait about 7 to 10 minutes to see PASS on the block.
Then your phone would automatically reboot into your android OS. Then you can start rooting, Tweaking and other stuff again.
At least one you have your phone and your warranty back.
FAQs:
1.my phone gets stuck at setup connection. what should I do?
Chill out! Don't panic! Simply remove your battery for 10 seconds then do these things all again and proceed!
2.my phone boot loops what do I do?
Simply reboot your phone in the Recovery mode "volume down+ power" and wipe cache/dalvik cache if you can.
(Once I installed FOTA from stock recovery and that worked for me)(I suggest you install the official TWRP recovery from SDcard to have more options)
3.you tell me your questions!I'll edit the topic later!
At last feel free to ask any dumb question. Dumb questions are muck more valuable than dumb mistakes!
Please hit thanks button if I helped you out!
Sent from my GT-I9001 using xda premium

GT i9505 keeps reseting at samsung logo

so basicly this happen. i updated my samsung s4 and after the instalation hes gone,,, he keeps restarting at the first samsung logo screen, vibrate then resets , i tryd that volume+ menu + power button and clear chache and factory reset but it kinda did nothing
im new at this android stuff so if someone got any ideas how to help me that would be great !
sorry if there is another post on the forum here with the same problem but i didint see them ,,,
any help would be good ! thanks in advance
type if you need more info
Hi Zarg00
I had the same problem as you a few days ago! Nothing seemed to work, wheter I tried wiping the cache/dalvik chache or doing a factory reset.
With Odin I managed to get it back to life again.
Don't worry, it's easier to repair as you might think. =)
You should have your original Samsung usb cable ready.
Unbricking Samsung Galaxy S4 by Installing the Official Firmware:
If wiping the data/factory reset, and cache partition does not help you, or you are not able to boot into the Android System or ClockworkMod recovery on your Galaxy S4, you can try installing the official firmware on your phone. Read the following guide that will help you find the correct firmware for your Galaxy S4 and install it safely.
Click to expand...
Click to collapse
Unfortunatly I can't post you the link directly, because my post count isn't high enough.
But try searching on google "droidviews how to unbrick galaxy s4" and it should be the second post with the very well written tutorial.
After you are done with it, your device should work correctly again.
You will lose your recovery and root though.
Good luck and report back, if it worked! :good:
Maybe not the first thing to do but have you tried flashing in the stock rom with odin and then do the updates again?
Sincerely, Joakim
im gettin Official Firmware now, so i think XD its 1.6 gb so its gonna take a while,
i realy hope this is gonna work
In my case i even had to restore the PIT, too. But try just flashing the official firmware before that.
Yeah, downloading the firmware can take a while. You can download the newest Version [I9505XXUBMGA Jelly Bean (4.2.2)] on google drive as well.
Just delete the "_" after https: in the link -> https:_//docs.google.com/file/d/0B7DKa-PuA5IlcVY2MGtMT1ZJMHM/edit
Drive lets you download faster than hotfile.
Its the DBT version though, so you might need to change your language from german to whatever you want at the first start.
But since your galaxy is still able to boot, the chances are really good that it will work well again after you have flashed the official firmware!
im kinda stuck at this
Boot your Galaxy S4 into Android System Recovery mode: hold Volume Up+Home+Power keys together till the screen turns up and the Samsung logo blinks twice. Just as you see a green Android bot, release the Power button but keep Volume Up and Home keys pressed till you see the recovery menu (see below). In recovery mode use the volume keys to scroll and power button to select options:
Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it.
i cant go to recovery mode, i can see little blue letters in upper left corner but phone resets -.-
any hint ?
Which recovery are you using? The "official" recovery did not work very well on my device. It just crashed when I tried to wipe cache partition.
Try flashing CWM Recovery for GT-i9505 with Odin.
uhm im confuzed, can you walk me throu i kinda dont get that "odin" program
dunno what to do with that files you show me :S
Don't worry, it is not that hard. =)
I guess you already flashed the official firmware with Odin, right?
To install cwm recovery follow these steps:
1. Make sure that your device is at least 50% charged
2. Power off your S4. To make sure that it is really off pull out the battery for half a minute and put it back in.
3. Start Odin3 on your PC.
4. Download the recovery file (link in the post I made before ^^) you should choose the one i marked with red in the screenshot below.
5. Okay, you have the recovery file and odin3 ready. In Odin, click the box before "PDA" and than click on "PDA" and choose the file you just downloaded. It should look like in the screenshot below (sorry, that it's in german, but I thought it might help you )
6. Now we have to prepare your Galaxy S4. Press and hold "Volume down" + "home" and then press "Power" to get into download mode. It will ask you, if you are sure. Just press "volume up" once.
7. Connect your phone to your PC with the USB Cable. Odin should recognize your device. Just make sure, that the ID:COM port turns blue.
8. Click on start and wait till your device reboots and Odin shows you the PASS! message. You can disconnect your S4 from the PC now.
9. And now try to get into recovery mode again by pressing "volume up" + "home" + "power". Sometimes you don't even have to press the home button, just try what works best for you. Release the power button as soon as you see the logo, but keep the "volume up" button pressed until you are in recovery mode.
If you can enter recovery mode again (and i'm crossing my fingers, that you can ^^) just continue with the tutorial from droidviews and wipe data/factory reset and after that cache partition.
I hope that helps! :fingers-crossed:
this works, thanks,
i did "Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it."
well that whas kinda the last thing i needed to do, but its still the same,
he shows me Samsung galaxy s4 gt - i9505 logo and keeps reseting ,,,
so this didint fix my problem
Damn.
Did you also flash the PIT files? I would do the whole process again, but this time follow "How to unbrick S4 by Flashing Stock Firmware and PIT File".
If that doesn't work as well, I guess it is some hardware error. The good thing is, that you did not lose any warranties by following the tutorials and you can return your phone to the shop and claim a repair.
so basicly i did all over again its still the same phone keeps resetting
but in recovery mode i noticed after i do this
"Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it."
when i want to reboot it says " Root access is missing. Root device ? "
basicly there are lots of
NO
NO
NO
NO
YES - Root device (/system/xbin/su)
i hope this helps you so you can help me :S
Zarg00 said:
so basicly i did all over again its still the same phone keeps resetting
but in recovery mode i noticed after i do this
"Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it."
when i want to reboot it says " Root access is missing. Root device ? "
basicly there are lots of
NO
NO
NO
NO
YES - Root device (/system/xbin/su)
i hope this helps you so you can help me :S
Click to expand...
Click to collapse
uhm i dont realy know what i did, but its working now
i can use my phone
maybe the problem whas my battery whas on 30 % ? since i pluged it in a charger and pressed the power button and now it works
gonna test it for a while and post here again if all works fine
aaaaannnnnddd nothing, it resets
im back at the beginning ,,,, he whas working fine for about 10 min then he just shuts down and resets all the time ,,,,
Hey Zarg00 =)
Did you restore the PIT file as well this time? You phone shows a really strange behavior. O__O
I have found a thread here, which might hopefully help you [Guide] How to unbrick your phone.
Sometimes flashing files with Odin won't work the first time and you have to try it multiple times.
If that all doesn't work, then I guess it is not a software but an hardware issue. :/
well i made it work, and its fine now, but it restarts sometimes ,,,
also Kies cant see my phone, its stuck on connecting ,,,, i can browse it throu My Computer i see it there
Cool! It finally works now? Did you do anything different or just the steps from the tutorial again?
Kies never really worked for me. Sometimes it didn't recognized my device at all.
Chelonee said:
Cool! It finally works now? Did you do anything different or just the steps from the tutorial again?
Kies never really worked for me. Sometimes it didn't recognized my device at all.
Click to expand...
Click to collapse
well i did all like you showed me, but this still isint my phone
he keeps resettin after i install any new application
i need to take batery out, leave him alone for 5 min then i put my batery inside and he works,,,
but i still think hes broken ,,,
DOWNLOAD this full package firmware and flash it.
cz4r3n said:
DOWNLOAD this full package firmware and flash it.
Click to expand...
Click to collapse
done, and phone is not resetting anymore, but now i got a black screen and it says "Samsung Knox error" the screen is all black , i can only see and use that status bar on the top of the screen, where is the time and notifications, what to do next ?
anyway i can talk and send msgs but only if someone sends / calls me first ,,,
now i have a new problem :cyclops:

Continuum signature failure fix

I had an error about verifying the file signature and found a fix buried in a thread:
http://forum.xda-developers.com/showthread.php?t=943415&page=5&nocache=1
It seems the phone needs to reboot into recovery mode instead of manually entering (you can't hold both volume buttons and power, for some reason it is different i.e. the camera button is the select button instead of menu). I had to do what Speardroid notes below to get update.zip to go with no error.
For those who have been hanging on the edge of their seats waiting to see if my struggles ended....they haven't totally...but I have finally managed some success.
it seems to be totally a hit or miss thing...but I have been able to get into CWR, red text and all, twice....enough to do a backup of my ROM and flash the DL17 clean ROM along with the two updates (email and social)
The only way I've been able to get into CWR....is to Odin the .pit and .tar file from this thread over and over again...until for some reason after it says reset in Odin my phone resets directly into manual recovery mode. This has happened twice, and both times I had to use the soft key to apply update.zip and both times it got me into CWR.
Manual rebooting with vol up and down takes me to the original recovery mode where the camera button works and flashing update.zip doesn't.
Even doing the Odin technique, when it doesn't fail, typically just restarts my phone into Android...except for two times.
So basically, I hope I don't need to flash anymore .zip files because getting back into CWR is like playing a game of roulette.....although strangely, I've never actually done that.
Click to expand...
Click to collapse

[Q] Deleted the system on my s4 i9505

Unfortunately I have deleted the system of my S4 i9505 from within TWRP :crying:
After having some fun with CyanogenMod I decided to try out the PAC rom. Following the installation instructions on their mod page I wiped the internal data of my phone but what as I was sliding the confirmation I realised that 'system' was checked. Too late
I have read through countless threads on this sight and others but have not had any success.
I have located the stock recovery image for my device.
When my device is first switched on I can still hit volume down + power button, and then volume up to enter the downloading mode (but if I don't the booting begins to loop at the Samsung Galaxy S4 logo and goes no further). Odin still recognises my phone and allows me to flash roms but when it does the auto re-boot at the end I don't have a system and it gets stuck on the booting at the Galaxy S4 logo.
Several threads have suggested that I Fastboot, I'm not sure if this is even an option with the S4 or not but please let me know if it you're sure that it is. I have been unsuccessful with my Fastboot attempts so far but if I just need to persevere with it then I can.
Any insight would be greatly appreciated :fingers-crossed:
In TWRP. Setting and Enable MD5 verification of backup files. (It maybe help.) Or Skip MD5 generation of backup.
And why you don´t flash stock ROM via Odin??
It's really easy.
Just reflash TWRP true Odin. Then flash the rom you want. That's all you need to do.
verny94 said:
In TWRP. Setting and Enable MD5 verification of backup files. (It maybe help.) Or Skip MD5 generation of backup.
And why you don´t flash stock ROM via Odin??
Click to expand...
Click to collapse
I'm not sure what the first part of your post means but I am not even able to access TWRP, that is the problem.
I have flashed the stock ROM via Odin. After I flash the ROM it does the normal re-boot. But I my phone loops on the splash screen without every actually re-booting properly.
Lennyz1988 said:
It's really easy.
Just reflash TWRP true Odin. Then flash the rom you want. That's all you need to do.
Click to expand...
Click to collapse
I have reflashed it but as described above my phone fails to reboot after the flash.
I might be missing something here. I'm not sure how to get into recovery mode after flashing the ROM. Immediately as the device begins to re-boot I've tried holding power button + volume up + home button but the screen goes black and when I let go of the buttons the phone just auto boots itself.
EDIT: My phone automatically attempts to boot whenever it is connected to USB.
Is it possible to flash an entire OS in a ROM rather than just altering the recovery??
1. Flash TWRP recovery true Odin. Make sure Auto-reboot is UNCHECKED. After it finished flashing, unplug it, reboot and try to get to recovery now.
Lennyz1988 said:
1. Flash TWRP recovery true Odin. Make sure Auto-reboot is UNCHECKED. After it finished flashing, unplug it, reboot and try to get to recovery now.
Click to expand...
Click to collapse
I have done that again (now having turned off the Auto-reboot (thanks btw). I can get Odin to come up with a big green PASS for flashing TWRP. Now when I try to boot into recovery however the phone vibrates and the flash screen comes up but then it powers down again. I'm just holding power button + volume up + home button to attempt getting into recovery but it isn't working. Do I need to try and flash another ROM?
EDIT: SUCCESS!!!! I made it to recovery (apparently this post was premature). It looks like failing to un-check the auto-reboot in ODIN was the problem. Thanks a lot man, that was a massive help. From recovery I was able to flash my backup ROM.
Ethereal95 said:
I have done that again (now having turned off the Auto-reboot (thanks btw). I can get Odin to come up with a big green PASS for flashing TWRP. Now when I try to boot into recovery however the phone vibrates and the flash screen comes up but then it powers down again. I'm just holding power button + volume up + home button to attempt getting into recovery but it isn't working. Do I need to try and flash another ROM?
Click to expand...
Click to collapse
No a rom has nothing to do with the recovery not working. Are you holding the buttons long enough? Just try to hold them for like 30 seconds even if it reboots 3 times.
Lennyz1988 said:
No a rom has nothing to do with the recovery not working. Are you holding the buttons long enough? Just try to hold them for like 30 seconds even if it reboots 3 times.
Click to expand...
Click to collapse
Guess I didn't edit my post as quickly as I thought I had, but it's all working now, thanks for the help.
Ethereal95 said:
Guess I didn't edit my post as quickly as I thought I had, but it's all working now, thanks for the help.
Click to expand...
Click to collapse
Good to hear

Categories

Resources