GT i9505 keeps reseting at samsung logo - Galaxy S 4 Q&A, Help & Troubleshooting

so basicly this happen. i updated my samsung s4 and after the instalation hes gone,,, he keeps restarting at the first samsung logo screen, vibrate then resets , i tryd that volume+ menu + power button and clear chache and factory reset but it kinda did nothing
im new at this android stuff so if someone got any ideas how to help me that would be great !
sorry if there is another post on the forum here with the same problem but i didint see them ,,,
any help would be good ! thanks in advance
type if you need more info

Hi Zarg00
I had the same problem as you a few days ago! Nothing seemed to work, wheter I tried wiping the cache/dalvik chache or doing a factory reset.
With Odin I managed to get it back to life again.
Don't worry, it's easier to repair as you might think. =)
You should have your original Samsung usb cable ready.
Unbricking Samsung Galaxy S4 by Installing the Official Firmware:
If wiping the data/factory reset, and cache partition does not help you, or you are not able to boot into the Android System or ClockworkMod recovery on your Galaxy S4, you can try installing the official firmware on your phone. Read the following guide that will help you find the correct firmware for your Galaxy S4 and install it safely.
Click to expand...
Click to collapse
Unfortunatly I can't post you the link directly, because my post count isn't high enough.
But try searching on google "droidviews how to unbrick galaxy s4" and it should be the second post with the very well written tutorial.
After you are done with it, your device should work correctly again.
You will lose your recovery and root though.
Good luck and report back, if it worked! :good:

Maybe not the first thing to do but have you tried flashing in the stock rom with odin and then do the updates again?
Sincerely, Joakim

im gettin Official Firmware now, so i think XD its 1.6 gb so its gonna take a while,
i realy hope this is gonna work

In my case i even had to restore the PIT, too. But try just flashing the official firmware before that.
Yeah, downloading the firmware can take a while. You can download the newest Version [I9505XXUBMGA Jelly Bean (4.2.2)] on google drive as well.
Just delete the "_" after https: in the link -> https:_//docs.google.com/file/d/0B7DKa-PuA5IlcVY2MGtMT1ZJMHM/edit
Drive lets you download faster than hotfile.
Its the DBT version though, so you might need to change your language from german to whatever you want at the first start.
But since your galaxy is still able to boot, the chances are really good that it will work well again after you have flashed the official firmware!

im kinda stuck at this
Boot your Galaxy S4 into Android System Recovery mode: hold Volume Up+Home+Power keys together till the screen turns up and the Samsung logo blinks twice. Just as you see a green Android bot, release the Power button but keep Volume Up and Home keys pressed till you see the recovery menu (see below). In recovery mode use the volume keys to scroll and power button to select options:
Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it.
i cant go to recovery mode, i can see little blue letters in upper left corner but phone resets -.-
any hint ?

Which recovery are you using? The "official" recovery did not work very well on my device. It just crashed when I tried to wipe cache partition.
Try flashing CWM Recovery for GT-i9505 with Odin.

uhm im confuzed, can you walk me throu i kinda dont get that "odin" program
dunno what to do with that files you show me :S

Don't worry, it is not that hard. =)
I guess you already flashed the official firmware with Odin, right?
To install cwm recovery follow these steps:
1. Make sure that your device is at least 50% charged
2. Power off your S4. To make sure that it is really off pull out the battery for half a minute and put it back in.
3. Start Odin3 on your PC.
4. Download the recovery file (link in the post I made before ^^) you should choose the one i marked with red in the screenshot below.
5. Okay, you have the recovery file and odin3 ready. In Odin, click the box before "PDA" and than click on "PDA" and choose the file you just downloaded. It should look like in the screenshot below (sorry, that it's in german, but I thought it might help you )
6. Now we have to prepare your Galaxy S4. Press and hold "Volume down" + "home" and then press "Power" to get into download mode. It will ask you, if you are sure. Just press "volume up" once.
7. Connect your phone to your PC with the USB Cable. Odin should recognize your device. Just make sure, that the ID:COM port turns blue.
8. Click on start and wait till your device reboots and Odin shows you the PASS! message. You can disconnect your S4 from the PC now.
9. And now try to get into recovery mode again by pressing "volume up" + "home" + "power". Sometimes you don't even have to press the home button, just try what works best for you. Release the power button as soon as you see the logo, but keep the "volume up" button pressed until you are in recovery mode.
If you can enter recovery mode again (and i'm crossing my fingers, that you can ^^) just continue with the tutorial from droidviews and wipe data/factory reset and after that cache partition.
I hope that helps! :fingers-crossed:

this works, thanks,
i did "Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it."
well that whas kinda the last thing i needed to do, but its still the same,
he shows me Samsung galaxy s4 gt - i9505 logo and keeps reseting ,,,
so this didint fix my problem

Damn.
Did you also flash the PIT files? I would do the whole process again, but this time follow "How to unbrick S4 by Flashing Stock Firmware and PIT File".
If that doesn't work as well, I guess it is some hardware error. The good thing is, that you did not lose any warranties by following the tutorials and you can return your phone to the shop and claim a repair.

so basicly i did all over again its still the same phone keeps resetting
but in recovery mode i noticed after i do this
"Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it."
when i want to reboot it says " Root access is missing. Root device ? "
basicly there are lots of
NO
NO
NO
NO
YES - Root device (/system/xbin/su)
i hope this helps you so you can help me :S

Zarg00 said:
so basicly i did all over again its still the same phone keeps resetting
but in recovery mode i noticed after i do this
"Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it."
when i want to reboot it says " Root access is missing. Root device ? "
basicly there are lots of
NO
NO
NO
NO
YES - Root device (/system/xbin/su)
i hope this helps you so you can help me :S
Click to expand...
Click to collapse
uhm i dont realy know what i did, but its working now
i can use my phone
maybe the problem whas my battery whas on 30 % ? since i pluged it in a charger and pressed the power button and now it works
gonna test it for a while and post here again if all works fine

aaaaannnnnddd nothing, it resets
im back at the beginning ,,,, he whas working fine for about 10 min then he just shuts down and resets all the time ,,,,

Hey Zarg00 =)
Did you restore the PIT file as well this time? You phone shows a really strange behavior. O__O
I have found a thread here, which might hopefully help you [Guide] How to unbrick your phone.
Sometimes flashing files with Odin won't work the first time and you have to try it multiple times.
If that all doesn't work, then I guess it is not a software but an hardware issue. :/

well i made it work, and its fine now, but it restarts sometimes ,,,
also Kies cant see my phone, its stuck on connecting ,,,, i can browse it throu My Computer i see it there

Cool! It finally works now? Did you do anything different or just the steps from the tutorial again?
Kies never really worked for me. Sometimes it didn't recognized my device at all.

Chelonee said:
Cool! It finally works now? Did you do anything different or just the steps from the tutorial again?
Kies never really worked for me. Sometimes it didn't recognized my device at all.
Click to expand...
Click to collapse
well i did all like you showed me, but this still isint my phone
he keeps resettin after i install any new application
i need to take batery out, leave him alone for 5 min then i put my batery inside and he works,,,
but i still think hes broken ,,,

DOWNLOAD this full package firmware and flash it.

cz4r3n said:
DOWNLOAD this full package firmware and flash it.
Click to expand...
Click to collapse
done, and phone is not resetting anymore, but now i got a black screen and it says "Samsung Knox error" the screen is all black , i can only see and use that status bar on the top of the screen, where is the time and notifications, what to do next ?
anyway i can talk and send msgs but only if someone sends / calls me first ,,,
now i have a new problem :cyclops:

Related

Plz help my samsung serious problem!

hi..
the thing is that i cant start my phone.
i hit the power button and it shows sasmung logo button etc.. and just black screen(phone is off now,dunno)
i went into recovery mod (hit the 3 buttons) and it shows that hes downloading something(android guy with shovel)..
plz help i cant turn my phone on!
PLZ HELP!
Hold down volume up + home key + power button then wait the "samsung galaxy s" then release the 3 buttons.
Sent from my GT-I9000 using XDA App
when i do that it says downloading dont remove the target!.
help plz
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Recovery_Mode
Factory reset
On the Galaxy S the soft-reset is achieved by pressing and holding the power button. A hard-reset can executed by pressing and holding VolumeUP+Home+Power. There you will find the options "reboot", "apply sdcard:update.zip", "wipe data/factory reset" and "wipe cache partition".
The "wipe data/factory reset" option will restore your phone to the original configuration of the firmware YOU LAST INSTALLED (including any updates made via update.zip). This will NOT bring your phone back to the firmware installed when you originally bought it unless you haven't flashed your phone.
You can navigate the recovery screen using VolumeUp & VolumeDown and use the Home button to select.
jje
i did the factory reset and when i power on the phone it shows the "S" and just after that its black screen.
help plz
Also got a problem with my phone after updating to froyo 2.2 and then trying to apply a lag fix. Phone starts and I get the flashing S logo then the screen goes blank. Phone occasionally vibrates. Trying the Button Press listed above I'm not getting any options on my screen.
Please invest some effort in trying to solve this yourself. Read posts like these http://forum.xda-developers.com/showthread.php?t=870233, there are many many posts which describe to flash stock roms with Odin
Mine is now 100% bricked with the Screenshot. Did get adb to see the phone and got recovery mode up, didn't know what to do next really with Odin not sure how that software operates or how to re-install files. So unplugged the phone and now after some research thought I'd have another go but oh no its got the logo on it now.
Look 2 posts up ("help me unbrick my Galaxy") and read about Odin. As long as you can get into recovery or download, your Galaxy is not bricked (more a matter of its owner being clueless)
Sent from my GT-I9000 using XDA App
Can't get into download or recovery mode, phone only has that image of the phone computer and exclamation mark now. Odin can't see phone if I connect it to PC. ADB can't locate the device either. Mine is totally bricked.
Wish I hadn't bothered with the upgrade to Froyo 2.2, my phone was operating okay on 2.1. Guess I'll have to call T Mobile in the morning to arrange for a repair/replacement of this handset.
If you could enter download mode before (volume DOWN + home + power), i don't see why you can't now. Pull out your sim card, external sd card and battery, wait a few minutes, then put battery in and try to open download mode. Then just flash whichever firmware you want via odin, and it'll work. I bricked mine two times today , also showed that image with an exclamation mark between a phone and computer.
I couldn't get download mode or recovery on my phone via the button press method. I got it up by having the phone on computer and using the adb command method. As Computer can no longer see the phone I can't use this method to get back to formatting and re-flashing the file.
Please spend some time to read it.
http://forum.xda-developers.com/showthread.php?t=819551

Unable to reset to factory settings, format memory, flash ROM, etc.

Hi,
My I9100 behaves quite strange.
I am unable to perform factory reset (using code from keypad or command from settings menu) - the phone reboots, goes into recovery mode where I can select wipe data/cache. Doing so has no effect on my phone, after another reboot the I9100 restarts in the same state as before factory reset.
The other thing is that I am unable to format interal memory. After using command from settings menu it says that memory is disconnected, formated, and after that all data (pics, mp3s, etc) are still available.
Also I am unable to flash ROM with any stock (tried KE4 and KE7) or aftermarket (Lightening) software. I tried Odin with and without PIT/Re-partition, also with no effect. The phone boots into previous state nevertheless confirmation in Odin that flashing completed successfully.
And the most aggravating thing is that after I reboot phone I am loosing all the recent data. The phone is booting in the state from before couple of days, with no recent messages etc. Thanks to Google account sync, the mail, calendar and so on re-sync properly, but it is no good solution since pictures, todos etc are gone after reboot.
I believe the thing started to occur after unsuccessful update to Twitter. Tried to do Market cache wipe (as suggested for similar cases to I9000 users), but also to no effect.
Have you any suggestion what else can I do?
strideer said:
Hi,
My I9100 behaves quite strange.
I am unable to perform factory reset (using code from keypad or command from settings menu) - the phone reboots, goes into recovery mode where I can select wipe data/cache. Doing so has no effect on my phone, after another reboot the I9100 restarts in the same state as before factory reset.
Power off .
Go to recovery mode
Hold down menu button + Volume UP + Power button
at splash screen release menu volume then power button .
In the recovery screen find wipe data factory reset and apply .
jje
Click to expand...
Click to collapse
JJEgan said:
strideer said:
Hi,
My I9100 behaves quite strange.
I am unable to perform factory reset (using code from keypad or command from settings menu) - the phone reboots, goes into recovery mode where I can select wipe data/cache. Doing so has no effect on my phone, after another reboot the I9100 restarts in the same state as before factory reset.
Power off .
Go to recovery mode
Hold down menu button + Volume UP + Power button
at splash screen release menu volume then power button .
In the recovery screen find wipe data factory reset and apply .
jje
Click to expand...
Click to collapse
As I said - that doesn't work for me.. :-(
Click to expand...
Click to collapse
Stuck in boot loop - No Recovery mode but can flash using download mode
I am stuck in bootloop. I cant access recovery using Vol Up + Home + Power but I can access Download mode and flash roms using ODIN. But no use. Everytime its stuck in boot loop and either the initial boot logo flashes or it stays stuck at the boot logo. Can please someone help. I read all the comments and lot of people having problem being able to get into Download mode but not in Recovery Mode. I would appreciate if someone can post a detailed response as to how to get rid of this issue.
imran077 said:
I am stuck in bootloop. I cant access recovery using Vol Up + Home + Power but I can access Download mode and flash roms using ODIN. But no use. Everytime its stuck in boot loop and either the initial boot logo flashes or it stays stuck at the boot logo. Can please someone help. I read all the comments and lot of people having problem being able to get into Download mode but not in Recovery Mode. I would appreciate if someone can post a detailed response as to how to get rid of this issue.
Click to expand...
Click to collapse
Wipe data and cache from recovery then flash a rom, you will lose everything not backed up
There is a guide about howto fix this, search first next time
Sent from my GT-I9100 using XDA Premium App
im sure there is another thread around he with 2 people in it that had the same problem as you, flashing via odin or cwm and then still ending up with the same firmware as pre flash.
i'll see if i can spot it and post it here, i dont know if they got it sorted or not tho.
veyka said:
Wipe data and cache from recovery then flash a rom, you will lose everything not backed up
There is a guide about howto fix this, search first next time
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Mr. veyka perhaps i didn;t drive my point home. Recovery mode is inaccessible. I cant wipe unless i get into recovery. its simple logic. i need to be able to access recovery before i can wipe
@ OP
http://forum.xda-developers.com/showthread.php?t=1178964
That is the thread that i had read which had the same problem as you, i havent read it all but the last few pages tend to lean towards that flash lock go ticked when flashing a ROM via odin.
imran077 said:
Mr. veyka perhaps i didn;t drive my point home. Recovery mode is inaccessible. I cant wipe unless i get into recovery. its simple logic. i need to be able to access recovery before i can wipe
Click to expand...
Click to collapse
Hey bud,
If you can get in to download mode then it should be ok, id try 2 things.
Go over to the the original android dev section and grab the CF kernel that was for the firmware installed, boot in to download and flash it via pda in odin, then try recovery again.
If that doesnt work, then download a full firmware from samfirmware and flash the main 3 files (Modem/CSC/Phone) and that should set your phone back to retail fresh.
ofc another reason could be your volume up button is broken
imran077 said:
Mr. veyka perhaps i didn;t drive my point home. Recovery mode is inaccessible. I cant wipe unless i get into recovery. its simple logic. i need to be able to access recovery before i can wipe
Click to expand...
Click to collapse
Oh, sorry, missed that, my bad
As said, flash cf root and see if that helps, if not check that your volume up key works within the os, if not flash to stock, and reset flash counter with a jig and send in for repairs.
If it does, cf root comes with an app called cwm manager that will allow you to reboot into recovery that way.
Sent from my GT-I9100 using XDA Premium App
Crucio_ said:
Hey bud,
If you can get in to download mode then it should be ok, id try 2 things.
Go over to the the original android dev section and grab the CF kernel that was for the firmware installed, boot in to download and flash it via pda in odin, then try recovery again.
If that doesnt work, then download a full firmware from samfirmware and flash the main 3 files (Modem/CSC/Phone) and that should set your phone back to retail fresh.
ofc another reason could be your volume up button is broken
Click to expand...
Click to collapse
my volume up button works> the reason being you need to press volume up to get into download mode after the Vol down + home + power combo.
There are other people who have had this issue of recovery not available.

[Q] Please help- defy stuck at red moto logo-recovery not showing full menu

hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Do not worry!
cute_kayani said:
hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Click to expand...
Click to collapse
Hello there!
As you mentioned that you are not able to see other Recovery options like "Install from zip" etc. This is because you must be booting your phone into the Stock Recovery. For those extra options to come up we need to boot the phone into the Custom Recovery.
To boot into Custom Recovery:
1. Press power on button;
2. Notice when the LED light blinks "BLUE" color; press both the volume keys this time;
3. Now it should show you Custom Recovery options this time;
4. Select "Install from Zip" and flash the ROM you were trying to flash (Also refer to the ROM info if that has some special installation steps).
If the above steps does not resolves the issue then you can always flash you phone with the Stock ROM found in the following article named as SBF:
http://forum.xda-developers.com/showthread.php?t=1216982
[Note: Above mentioned article has all the information that a defy user needs. Thanks "Zephyrot" for that wonderful article.]
Hope that helps!
Good Luck!!
there is no blue led, when press power button it stuck on red moto logo..
and when press both vol down and power it goes into recovery with limited options.
can it is possible i put rom into sd card and rename it with Update.zip and then in recovery use it with update zip..
or any other solution
Thanks
cute_kayani said:
hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Click to expand...
Click to collapse
I guess you'd charge your phone first then wait for a while,
cute_kayani said:
there is no blue led, when press power button it stuck on red moto logo..
and when press both vol down and power it goes into recovery with limited options.
can it is possible i put rom into sd card and rename it with Update.zip and then in recovery use it with update zip..
or any other solution
Thanks
Click to expand...
Click to collapse
I'm disappointed to know that you are still facing the same issue. Also, renaming the file to update.zip will not let you flash it.
As suggested above first recharge your battery for a while and then flash with appropriate SBF of your region using RSD Lite. Refer to the above given link it has all the information. Also, note that if you flash with any particular android version SBF (which is not a fixed SBF) then you will not be able to downgrade (above article has all info).
Hope this helps!
Good Luck!
Okay, thanks for all.. this is the T Mobile Uk version and i got it with eclair rom, and than updated with orignal T mobile froyo.
Now i should start from froyo or eclair?
cute_kayani said:
Okay, thanks for all.. this is the T Mobile Uk version and i got it with eclair rom, and than updated with orignal T mobile froyo.
Now i should start from froyo or eclair?
Click to expand...
Click to collapse
You may use any ROM either Froyo or Eclair. Please also check the downgradilbility of the ROM. As in many of the cases if the ROM is not fixed then switching back to the earlier versions is impossible without having the Nandroid backup. I suggest you to use the version which is officially released in your region.
ROMs can be downloaded from the below mentioned link:
http://and-developers.com/sbf:defy
Complete information about various SBFs at:
http://forum.xda-developers.com/showthread.php?t=966537
Hope this helps!
Happy Flashing!
i flash it with JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
and i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
what is this?
but when i connect usb ,rsd detect it..but this time no white led also.
I again flash it with JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Service1FF.sbf
successfully passed and message pop for reboots,but still black screen.
Rajneeshgadge17 said:
Hello there!
As you mentioned that you are not able to see other Recovery options like "Install from zip" etc. This is because you must be booting your phone into the Stock Recovery. For those extra options to come up we need to boot the phone into the Custom Recovery.
To boot into Custom Recovery:
1. Press power on button;
2. Notice when the LED light blinks "BLUE" color; press both the volume keys this time;
3. Now it should show you Custom Recovery options this time;
4. Select "Install from Zip" and flash the ROM you were trying to flash (Also refer to the ROM info if that has some special installation steps).
If the above steps does not resolves the issue then you can always flash you phone with the Stock ROM found in the following article named as SBF:
http://forum.xda-developers.com/showthread.php?t=1216982
[Note: Above mentioned article has all the information that a defy user needs. Thanks "Zephyrot" for that wonderful article.]
Hope that helps!
Good Luck!!
Click to expand...
Click to collapse
Tnx for post guy
Palestrino said:
Tnx for post guy
Click to expand...
Click to collapse
Thanks,
I tried but there was no blue led and flash it two time but now black screen is the hurdle.
please tell how to pass this.
While flashing there was message for successful status, and reboot but now when i press power button nothing happen. And neither goes into boot loader or recover.
Only RSD detects my phone for flashing, otherwise its complete dead....
ohhhoooooo MIUI Rom You ruined my DEFY (
cute_kayani said:
i flash it with JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
and i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
what is this?
but when i connect usb ,rsd detect it..but this time no white led also.
Click to expand...
Click to collapse
cute_kayani said:
I again flash it with JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Service1FF.sbf
successfully passed and message pop for reboots,but still black screen.
Click to expand...
Click to collapse
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Thanks Rajneeshgadge17..
When i press these buttons nothing is happening. and i charge up battery with universal charger, don't know what is wrong.
only RSd detect my phone when i plugin USB.. otherwise it seems completely dead.
can somebody help........
cute_kayani said:
can somebody help........
Click to expand...
Click to collapse
Refer this post = http://forum.xda-developers.com/showpost.php?p=24205029&postcount=2
What if I have balck screen in recovery mode as well?
Do you have any idea how to solve the same problem if the recovery mode does not start neither? Only RSDLite sees that the phone is connected. I can refresh the ROM but I did not find the right .sbf file yet. Do you know maybe which one would bring back the phone from death?
Thank you in advance!!
Rajneeshgadge17 said:
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Click to expand...
Click to collapse
Ryaren said:
Do you have any idea how to solve the same problem if the recovery mode does not start neither? Only RSDLite sees that the phone is connected. I can refresh the ROM but I did not find the right .sbf file yet. Do you know maybe which one would bring back the phone from death?
Thank you in advance!!
Click to expand...
Click to collapse
Try to find the latest stock rom from your region... and match with ur defy type... flash with rsd that would bring ur defy back
Sent from my XT535 using xda premium
Doesn't work for me
Rajneeshgadge17 said:
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Click to expand...
Click to collapse
Unfortunately it doesn’t work for me, my defy doesn’t react for any key combination. RSD Lite still discovers it I can flash any sbf’s. But I’m still getting black screen. The problem is that I don’t know which sbf I should use… Please help. I know I can’t brick defy but if I don’t know how to get back I’m almost there… 
0lsztyN said:
Unfortunately it doesn’t work for me, my defy doesn’t react for any key combination. RSD Lite still discovers it I can flash any sbf’s. But I’m still getting black screen. The problem is that I don’t know which sbf I should use… Please help. I know I can’t brick defy but if I don’t know how to get back I’m almost there… 
Click to expand...
Click to collapse
It seems an issue with the Kernel. May be you are flashing the Green lense Defy (MB525) with GB kernel (i.e. MB526 sbf).
Also check the Bootloader version and which Android version you were using.
Here is a list of all the SBF's for both versions:
http://forum.xda-developers.com/showthread.php?t=966537
Hope this helps.
PS:- I don't use Defy for a year now as I own a Nexus 4.

[Q] i9505 s4 button problems

hi, I have just registered and looking for some help if at all possible,
I have a galaxy i9505 S4 and recently the Home button seems to come and go, and the power button the same, and also the screen keeps lighting up every minute for about 10 secs, if i remove the battery I can restart the phone, and also the home button works to start the phone in factory reset mode, so i feel it might be a software problem rather than hardware.
is there any way to get the phone to reinstall the firmware, as factory reset didnt help
the phone is on orange (EE) UK
thanks for any advice or help given.
jamiet77 said:
hi, I have just registered and looking for some help if at all possible,
I have a galaxy i9505 S4 and recently the Home button seems to come and go, and the power button the same, and also the screen keeps lighting up every minute for about 10 secs, if i remove the battery I can restart the phone, and also the home button works to start the phone in factory reset mode, so i feel it might be a software problem rather than hardware.
is there any way to get the phone to reinstall the firmware, as factory reset didnt help
the phone is on orange (EE) UK
thanks for any advice or help given.
Click to expand...
Click to collapse
Hi.
Can u explain the home button issue and the screen lighting up again? what was the problem?
what firmware are u using?
maanz "L" said:
Hi.
Can u explain the home button issue and the screen lighting up again? what was the problem?
what firmware are u using?
Click to expand...
Click to collapse
hi, thanks for the reply,
the home button just dont work, single click, and holding it in for the task manager dont do nothing either, but if i turn off the phone and hold the home, vol up, and power button, it boots into reset menu fine.
on and off the power button dont work, and i have to remove the battery to restart it.
the screen just lights up every minute for about 10 secs as if it has a notification, but there is nothing there, it drains the battery to empty in about 5 hours.
cheers.
Jamie.
jamiet77 said:
hi, thanks for the reply,
the home button just dont work, single click, and holding it in for the task manager dont do nothing either, but if i turn off the phone and hold the home, vol up, and power button, it boots into reset menu fine.
on and off the power button dont work, and i have to remove the battery to restart it.
the screen just lights up every minute for about 10 secs as if it has a notification, but there is nothing there, it drains the battery to empty in about 5 hours.
cheers.
Jamie.
Click to expand...
Click to collapse
do u have a custom recovery like Philz recovery?
if u do, reboot to recovery, do factory reset and wipe cache.
then (still in recovery), go to advance, wipe dalvik cache.
Reboot yr phone.
See how it goes..
maanz "L" said:
do u have a custom recovery like Philz recovery?
if u do, reboot to recovery, do factory reset and wipe cache.
then (still in recovery), go to advance, wipe dalvik cache.
Reboot yr phone.
See how it goes..
Click to expand...
Click to collapse
I dont have that, the phone is under warantee still so would putting that on void this? I dont want to send it back as they take 28 days, and i need the phone.
so is there any other way?
jamiet77 said:
I dont have that, the phone is under warantee still so would putting that on void this? I dont want to send it back as they take 28 days, and i need the phone.
so is there any other way?
Click to expand...
Click to collapse
If u want to reflash firmware,
First u have to install Samsung kies app on yr PC here:http://forum.xda-developers.com/showthread.php?t=2038555
Then install Odin3 on yr PC here:http://forum.xda-developers.com/showthread.php?t=1728605
Download yr stock 4.2.2 firmware from XDA/Sammobile. (make sure it is in .tar.MD5 format)
After finish downloading yr firmware version, open odin.
In Odin, Make sure that ONLY AutoReboot & F.Reset Time is ticked in Odin options.
Load extracted file (.tar.MD5) as PDA in Odin.
Turn off your phone, press & hold POWER+VOLUME+DOWN buttons until phone boot into Download Mode.
Connect phone to the computer and wait for the drivers to be installed. You will see blue or yellow indicator in left top corner of Odin, with phone connected to port: COM:x
Click START and wait until you see GREEN indicator [PASS], flashing is finished.
Then, it will reboot itself. U can unplug yr USB cable.
That's it.
If u want to remove the warning triangle on boot (for warranty purposes), go here:http://forum.xda-developers.com/showthread.php?t=1494114
Hope I have help u and this is only way to do if u want reinstall yr firmware.
maanz "L" said:
If u want to reflash firmware,
First u have to install Samsung kies app on yr PC here:http://forum.xda-developers.com/showthread.php?t=2038555
Then install Odin3 on yr PC here:http://forum.xda-developers.com/showthread.php?t=1728605
Download yr stock 4.2.2 firmware from XDA/Sammobile. (make sure it is in .tar.MD5 format)
After finish downloading yr firmware version, open odin.
In Odin, Make sure that ONLY AutoReboot & F.Reset Time is ticked in Odin options.
Load extracted file (.tar.MD5) as PDA in Odin.
Turn off your phone, press & hold POWER+VOLUME+DOWN buttons until phone boot into Download Mode.
Connect phone to the computer and wait for the drivers to be installed. You will see blue or yellow indicator in left top corner of Odin, with phone connected to port: COM:x
Click START and wait until you see GREEN indicator [PASS], flashing is finished.
Then, it will reboot itself. U can unplug yr USB cable.
That's it.
If u want to remove the warning triangle on boot (for warranty purposes), go here:http://forum.xda-developers.com/showthread.php?t=1494114
Hope I have help u and this is only way to do if u want reinstall yr firmware.
Click to expand...
Click to collapse
hi, I have just done upgrade and initialisation from Kies, and it redownloaded and reinstalled the latest software, took ages, and the button is still not working, so i guess it will have to go to the shop.
cheers for all your help, the button only works before the OS has started, as i can get into recovery menu.
thanks again.
mechanical or hardware problem
That seems pretty much a mechanical problem (button broken) or hardware issue (shortcut somewhere? could explain the screen problem...)
jamiet77 said:
hi, I have just done upgrade and initialisation from Kies, and it redownloaded and reinstalled the latest software, took ages, and the button is still not working, so i guess it will have to go to the shop.
cheers for all your help, the button only works before the OS has started, as i can get into recovery menu.
thanks again.
Click to expand...
Click to collapse
droggen said:
That seems pretty much a mechanical problem (button broken) or hardware issue (shortcut somewhere? could explain the screen problem...)
Click to expand...
Click to collapse
the buttoon does work, but only to get the phone into recovery mode at startup, so physically the button works, just not when the phone is powered into the android os.
Im a bit out of ideas.
jamiet77 said:
the buttoon does work, but only to get the phone into recovery mode at startup, so physically the button works, just not when the phone is powered into the android os.
Im a bit out of ideas.
Click to expand...
Click to collapse
It's a faulty button mate.
You don't need to use the home button to boot to recovery or download mode on the S4.
You can simply press volume up+power (recovery) or volume down+power (downloadmode) no need for home button at all.
This is why you think it works.
Obagleyfreer said:
It's a faulty button mate.
You don't need to use the home button to boot to recovery or download mode on the S4.
You can simply press volume up+power (recovery) or volume down+power (downloadmode) no need for home button at all.
This is why you think it works.
Click to expand...
Click to collapse
Not true, i have this same issue after opening Wanam.
The screen turns on if i press the home button but wont do anything else (exit from an app back to home screen etc)
About to re-flash rom and / or kernel
Edit:
Also
- the lockscreen wont work
- when connected to PC, the filesystem wont show up (used 3 diff usb cables, 2 diff PC's)
FelixCited said:
Not true, i have this same issue after opening Wanam.
The screen turns on if i press the home button but wont do anything else (exit from an app back to home screen etc)
About to re-flash rom and / or kernel
Edit:
Also
- the lockscreen wont work
- when connected to PC, the filesystem wont show up (used 3 diff usb cables, 2 diff PC's)
Click to expand...
Click to collapse
It's very true mate.
YOU DO NOT NEED HOME BUTTON TO BOOT TO RECOVERY, SIMPLE.
Your issue sounds different to the OPs.
If you refer back to his first post, he said his power button doesn't do ANYTHING.
"the home button just dont work, single click, and holding it in for the task manager dont do nothing either, but if i turn off the phone and hold the home, vol up, and power button, it boots into reset menu fine"
Yours works.

[Q] Factory Reset get stuck on Downloading Do not turn off...

Hello Folks... I want to make a Factory reset on my SGH-i337 ATT Galaxy S4, but I am getting troubles when doing in either way
1)System Settings > Accounts> Backup and reset or buy 2)pressing Vol Up + Home + Power . On the first method when I confirm the Delete All data the phone try to restart and it got the Downloading ... screen also when trying the 2nd method the same issue happens.
I have looked every where and can't find something a like.
Also in the tiny letters says the could not do normal boot: Odin Mode, Product Name Current Binary Samsung Official etc.
But if I do a Vol Down + Home + Power I can go to a screen that say Volume up to Continue or Volume Down to Restart and I choose the second and my phone restart without any issues. But without the Factory reset.
I gave Safestrap installed but no Slot roms yet
DSamWay40 said:
Hello Folks... I want to make a Factory reset on my SGH-i337 ATT Galaxy S4, but I am getting troubles when doing in either way
1)System Settings > Accounts> Backup and reset or buy 2)pressing Vol Up + Home + Power . On the first method when I confirm the Delete All data the phone try to restart and it got the Downloading ... screen also when trying the 2nd method the same issue happens.
I have looked every where and can't find something a like.
Also in the tiny letters says the could not do normal boot: Odin Mode, Product Name Current Binary Samsung Official etc.
But if I do a Vol Down + Home + Power I can go to a screen that say Volume up to Continue or Volume Down to Restart and I choose the second and my phone restart without any issues. But without the Factory reset.
I gave Safestrap installed but no Slot roms yet
Click to expand...
Click to collapse
You did something wrong and screwed up your stock recovery. You need to odin back to MF3 and try again (assuming you are on MF3 to begin with). Make sure you read EVERYTHING before you try it again though. You can search the forum to find out how to use ODIN to get back to stock MF3. There is a thread or two about it in the General and Q&A sections. Good luck.
While you are at it, you should probably go a head and read all of the "pinned" threads in the general and Q&A sections as well.
All questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNM
DSamWay40 said:
Hello Folks... I want to make a Factory reset on my SGH-i337 ATT Galaxy S4, but I am getting troubles when doing in either way
1)System Settings > Accounts> Backup and reset or buy 2)pressing Vol Up + Home + Power . On the first method when I confirm the Delete All data the phone try to restart and it got the Downloading ... screen also when trying the 2nd method the same issue happens.
I have looked every where and can't find something a like.
Also in the tiny letters says the could not do normal boot: Odin Mode, Product Name Current Binary Samsung Official etc.
But if I do a Vol Down + Home + Power I can go to a screen that say Volume up to Continue or Volume Down to Restart and I choose the second and my phone restart without any issues. But without the Factory reset.
I gave Safestrap installed but no Slot roms yet
Click to expand...
Click to collapse
I experienced the same problem too. Follow these steps:
1) Restart your phone and boot into Safestrap.
2) Make sure the slot selected in "Boot Options" is the "Stock Rom"
3) Go back to the main menu of Safestrap and click "Wipe"
4) Then "Swipe to Factory Reset"
5) Once reset reboot your phone and you should be factory reset.
Good Luck :fingers-crossed:

Categories

Resources