Related
Hi all,
I have this problem:
1) I tried install MAGLDR 1.13 on my phone and started ROM update utility. Update run everything ( On the screen was update from 3.15 to 2.00 ROM????? I dont understand)
2) After restart the white screen with HTC Logo is displayed and nothing - no response
3) The bootloader by pressing vol. down+ power does not work. I press everything (vol + and -) and still same - white screen with logo.
4) I cant use standart flash by PC conection, because phone didnt connect to PC.
Please, is there any help how to install bootloader and new ROM from SD card? Or other way how to repair it.
Thanks for any hint (except throw the phone from window )
PS: Please use some kind of easy English, my English is little poor and some technical words should be problem
Ive had the same problem, your bootloader is kind of broken! In 1 out of 50 tries you will reach the bootloader and then immideatly flash original spl and a stockrom.
Then send it to htc for warranty
Sent from my HTC HD2 using XDA App
boot
pres first on volume down button and then pressing power button . volume down button hold on to you in the colored screen. Once on colored screen with usb on pc and wm rom flashing.
DO this:
go to this : http://forum.xda-developers.com/showthread.php?t=945427
do step 1- 5 . Make sure you have HSPL 2.08 !
feel free to ask questions.
Hi, I am hoping someone can help me. I am having trouble booting back into windows mobile 7 after switching my phone off for the first time since install.
Having never done anything like this before I followed the instructions closely making sure I had the correct spl, hspl2, the correct magldr, radio etc.
7 was working perfectly. My problems only started when I realised I forgot to put my sd card in before install, following instructions I found on another thread it was suggested that I remove the battery insert sd card and turn phone back on etc. However I can’t turn the phone back on, the only thing I can do is hold down the volume key and the red button to get the red/green/blue/white – screen.
Does anyone have any suggestions on how to resolve this problem? Have I bricked my phone?
Sorry if a similar query has already been posted. I would appreciate any help, thanks!
Can you boot into MAGLDR and reflash? Hold down the power button from off and select option 5.
No. I can't get the MAGLDR screen to load, the only thing that happens when i hold the power button is a small vibration but nothing loads.
tjr2011 said:
No. I can't get the MAGLDR screen to load, the only thing that happens when i hold the power button is a small vibration but nothing loads.
Click to expand...
Click to collapse
Probably you need to reflash magldr....And the rom....start over from the begining
here is the thread to follow if you want and android on sd card
http://forum.xda-developers.com/showthread.php?t=944288
http://forum.xda-developers.com/showthread.php?t=945565
And here the magldr thread
http://forum.xda-developers.com/showthread.php?p=10197474
Importand: Follow the instructions to the letter.
I can reflash magldr, but the phone still wont power on or load the magldr menu screen
hi dudes i am new here and i think i fu*ked my hd2 up... can you guys help... what should i do... Flashed failed on PC and now i get fatal hit 4 on my hd2... what should i do!? How do i reflash it?
Hmmm, i would start right from the beggining again.
Re-flash MAGLDR by holding down the volume button whilst pressing on.
Then, re-flash WP7.
Alternatively use the MAGLDR youve got, and hold down the on off button and go to flash on the menu (cant remember exactly what it says on menu
If I were you I'd do the following. Might seem a lot like overkill, but should work 100%.
1 - Go into bootloader (press and hold vol down button then power on as normal)
2 - Flash any WM6.5 ROM
3 - Charge the battery to 100%
4 - Perform a Task 29
5 - Flash a 2.xx.50.x radio
6 - Flash Magldr
7 - using vol down button select option 5 from magldr menu
8 - when phone says USB flash WM7 (suggest YukiXDA for the mo until a ripe MANGO released)
i made it but can you give me a good wp7 rom and radio file? ty
This Is The Most Stable N Outstanding One I Saw And Im using at the Moment
http://forum.xda-developers.com/showthread.php?t=1080950
and one more question... Can i go back in windows mobile 6.5 after i install wp7?
i installed everything but when i was installing the WP7 rom it got some error and now i start the device says go go go in magldr mode and then shows a black white picture with mobile and a lap top and stays like that 5 mins and then restarts... what should i do? It drives me crazy...
problem with hard reset
Can some one help me with hard resetting windows phone7
1. On magldr screen, when I see "1234.." etc, I pressed and hold volume down key, I was expecting to see some screen which says press vol- twice to clear data. Instead I am seeing the main boot screen with four colour bands from top to bottom.
Please help..
Thanks in advance
Kishore
Hard resetting WP7 on HD2
Can some one help me with hard resetting windows phone7 on HD2
1. On magldr screen, when I see "1234.." etc, I pressed and hold volume down key, I was expecting to see some screen which says press vol- twice to clear data. Instead I am seeing the main boot screen with four colour bands from top to bottom.
Please help..
Thanks in advance
Kishore
EDIT:: I got it resolved, I could not figure out the way I need to press both the vol+ & vol- button at once during the 1234 GoGo screen... It worked
what do you want? cant understand you... You want to clear data or hard reset windows 7 phone... You need MAGLDR just when you flash the windows 7 phone rom...
king_slavcho said:
what do you want? cant understand you... You want to clear data or hard reset windows 7 phone... You need MAGLDR just when you flash the windows 7 phone rom...
Click to expand...
Click to collapse
Pardon for not being clear to you...
I got it resolved though, I could not figure out the way I need to press both the vol+ & vol- button together during the 1234 GoGo screen... (earlier i was pressing either vol + or vol- but the requirement is both vol+ and vol-)
Regards
Kishore
Fatal hit 4
Hey guys,
After a while i decide to go back tom my HTC HD2 and install the WP7 rom but like some others im facing the "1234 fatal hit 4' issue. Has anybody being able to adress the problem?
Thanks in advance.
Hi all!
I have a big problem - last 10 hour see everything, but my problem no ansver -
hd2 eu version! I try install android!
1. step: install hspl
2. setep: Run task 29 format nand
and after I hold down key and power on and the telephon no step the bootloader mode!
I try some tips but no one cant help for me!
I try but evry try dont step boot loader!
Please help some one
You mean you completed step 1 of installing HSPL, and step two of doing task29 and after that you couldn't get into bootloader?
If yes, How did you manage to get into bootloader in the first two steps?
Marvlesz said:
You mean you completed step 1 of installing HSPL, and step two of doing task29 and after that you couldn't get into bootloader?
Click to expand...
Click to collapse
Yes
I try wol down and power but dont step bootloader
every time I tried, did not want to enter the bootloader. It would be nice if someone could help. This is one of my friend's phone and is often installed with my own, but there was no problem!
Now you have to enter it every time I try to not let you. Simply do not enter!
first time
i start the hspl4 and work is normaly wreck the phone no problem next step i run task 29 an run normaly and after is no step in to the boot loader
Are you using windows mobile 6.5?
Marvlesz said:
Are you using windows mobile 6.5?
Click to expand...
Click to collapse
yes before i start this metod i using winmo 6.5.
Just what I thought, I assume you have mistaken activsync in winmo for the bootloader. And since Task29 removes your WinMo rom that means no more activesync to flash roms. And you thought being on the blank htc screen and pressing vol down would get you to activesync.
If my assumption is correct then do the following:
Turn off your phone, Hold the "Volume Down" button .. and turn on your phone, release it when you see a tri-colour screen. From there, connect the USB cable and flash as if you were in ActiveSync.
---------------------------------------------------------------------------------------------------------------
EDIT
There is no reason for your phone to not go into bootloader after you have successfully flashed hspl and task29 except this.
I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance
Taller2222 said:
I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance
Click to expand...
Click to collapse
I have tried them!
Despite the bootloader screen, but you are not willing to appear!
You do not want to come if you would have to go the wrong thing, but so I can not connect to the computer usb.
Taller2222 said:
I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance
Click to expand...
Click to collapse
Are you doing this while the phone is off?
Or you're doing this while you're on "HTC Screen" ?
Are you sure you have successfully flashed HSPL and done Task29 ?
Taller2222 said:
I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance
Click to expand...
Click to collapse
You are trying to get to the tri-colour screen, yes? Where the screen has 3 colours?
1. Power off phone
2. Remove battery
3. Hold vol down key
4. Insert battery WITHOUT LETTING GO OF VOL DOWN
5. Power on phone WITHOUT LETTING GO OF VOL DOWN
6. Enter bootloader mode
Marvlesz said:
Are you doing this while the phone is off?
Or you're doing this while you're on "HTC Screen" ?
Are you sure you have successfully flashed HSPL and done Task29 ?
Click to expand...
Click to collapse
the flash is successfull install the hspl an task29 too. I sure tis fact
The telephon akkumlator is off an beck and i try volume down + power on and no stem bootloader
jwchips said:
You are trying to get to the tri-colour screen, yes? Where the screen has 3 colours?
1. Power off phone
2. Remove battery
3. Hold vol down key
4. Insert battery WITHOUT LETTING GO OF VOL DOWN
5. Power on phone WITHOUT LETTING GO OF VOL DOWN
6. Enter bootloader mode
Click to expand...
Click to collapse
Its not work i try so many time in this method
Nobody has any extra ideas on how to throw into bootloader mode! I have been completely used up.
I have tried several methods, but none of them took me to success! : S
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Hi every one!
The problem is not resolved! Everything is done as it is in the descriptions. Probably the volume down buttons on the problem, or around it.
I decided to take it doctor uncle, so I already had treatment for the doc!
Thank you very much everyone for your help and advice. If I learn what went wrong and how can this be remedied share with everyone, if someone in that position would not be a problem any more! Or just do not be nervous: S
Have a nice day everyone!
You read this thread yet you missed a crucial post i think; a possible solution is offered there:
T-Macgnolia said:
You may have a faulty volume button ribbon that is causing you not to be able to boot into the bootloader. Check out this thread you will see what I mean. Read post #10
Click to expand...
Click to collapse
It very much sounds like your situation...
Diegis0n said:
You read this thread yet you missed a crucial post i think; a possible solution is offered there:
It very much sounds like your situation...
Click to expand...
Click to collapse
Thanks
I see this post befor, but i don't like disassemble the Phone Monday night is finish! (say the doctor) And i don't have another flex cable, i can't try this at my home.
But thank's the post and everything.
Found the problem!
The bootloader is delete from the ram -need JTAG, this day is ready the phone!
I do not use anymore task29
Taller2222 said:
Found the problem!
The bootloader is delete from the ram -need JTAG, this day is ready the phone!
I do not use anymore task29
Click to expand...
Click to collapse
glad you found where your problem lay.
But for your information, Task29 does not wipe off your bootloader
Hey guys.
I have a bricked HTC HD2 here. I installed Android 2.2 on it, and it ran fine for a long time. But a few days ago, it got stuck in a bootloop. It gets stuck on the Android logo and doesn't get past that point at all.
What I've tried (in chronological order):
1. AD Hardreset from aMAGLDR: erased all data, but didn't fix the problem. Kept going in bootloop.
2. AD Recovery: Failed. Doesn't get past the "GO GO GO!!"
3. Repair aMAGLDR using HD2 NAND toolkit: tried repairing (150MB partition size) and installing Clockwork Mod (150MB). Same exact results when trying to get into AD recover. Only diffrence is that I now don't have a ROM on my NAND anymore.
4. Install a diffrent rom: Tried a few of them, but they all keep getting stuck on their bootlogo (HTC, Android, ...).
5. Restore STOCK ROM WM6.5: I'd love to, but I can't get into the three-colors-bootscreen. It goes straight to aMAGLDR, even when I boot holding the right buttons (volume down + power [both short click and long hold]). I had set up the ROM files correctly on the SD card.
6. Install the STOCK ROM using the HD2 NAND TOOL: after going to USB Flash mode and installing the default microsoft drivers (it didn't want to accept the Google Android drivers or HTC drivers I downloaded earlier), the flash utility keeps getting stuck on ERROR 264: CONNECTION. The only thing I can do in the HD2 NAND UTILITY is repair aMAGLDR. Other options result in the same error. Task29 can't find the phone either.
Bottom line, I cannot (ABSOLUTELY not) get into the tri color boot screen. It sends me straight to magldr. Also, my volume buttons are working just fine.
I really don't know what to do anymore. I hope someone can help me, any help would be greatly appreciated
Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button
powerofthink said:
Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button
Click to expand...
Click to collapse
Did you even read the OP's post, clearly I think not. The OP says several times that they can not get the device to the multicolor WINCE bootloader.Without being ably to boot into the bootloader they can notflash via SD card.
At the OP you can stop trying to flash via USB flasher in MAGLDR, it is only for flashing Android RIMs, WP7 ROMs, and Custom Android recoveries. If you are positive your volume down button works then you probably have some bad NAND blocks, but that is just a guess, with out access to the bootloader you are pretty much only left with flashing Android or WP7 via USB flasher in MAGLDR.
That's problematic... The HD2 NAND utility can't flash any ROMs, since the utility can't find the device (error 264).
I've tried 8 diffrent ROMS (from http://android.hd2roms.com/) by putting them on the SD card and use the "AD SD boot" function, but none of them can get past their bootlogo... All ROMs keep hanging on HTC / Android logos. Some of them used to work in the past, I recall...
Here, try these fixes and read the WHOLE POST :
http://forum.xda-developers.com/showpost.php?p=21725062&postcount=7
Thanks for the link. Unfortunately, none of the solutions worked. The battery pins were indeed bent, but after putting them back in place, the problem persisted.
I left my phone powered down all night and tried booting it in bootloader this morning. It didn't work. So that rules out solution 3 awell.
I've even put it in the freezer for half an hour (solution 5), but nothing changed.. Browsed through the last thread aswell, but there was no stuff I haven't tried yet. I can't even start tetris, since it keeps hanging on a blank screen aswell
The guy in solution #4 was facing the same issue (I think).
Especially the second part of the solution, where he talks to the OP. Read it carefully, and check out the post and thread he referred to.
Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!
Lorre851 said:
Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!
Click to expand...
Click to collapse
horayyy for the HD2 & for the guys that gave the solutions!
need information in case of not getting into the bootloader
how can I use the american android + USB flasher method to work for my hd2 if
I am not able to boot it,
can't soft/hard reset it,
can't get into the bootloader (using volume down + end key pressed).
I used android installed on SD card.
It is totally unresponsive for now. volumn keys worked perfectly when it is was working lastly !
Please tell what can bo done to it to get it working or where does the problem lies.
check your battery pins and also battery if it is charged.
and,
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card(formatted FAT32.)
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume or without press
Click to expand...
Click to collapse
and then you can try an android rom again..
Another solution?
I had the exact same problem. And I am under the impression that there is no solution for every case. But for me it worked to press the volume down button very softly. I tended to push the button as hard as I could, however when I only pressed the volume down button slightly it went straight to the triboot color.
Hopefully this works for some of you.
Can someone help?
Hi,I want to refresh post, becouse i have exact same problem - can't get to serial bootloader, and in MAGLDR i can use only the USB FLASHER option. If someone could tell me how to flash any new rom only through FLASHER ? Last thing i can say: my problem started from installing this app from google Play play.google.com/store/apps/details?id=eu.chainfire.livelogcat.lite (sry for that, but I can't post URL yet) it might messed up my kernel and i have no idea what to do.