[Q] JIT Autoinstall [xRecovery] - XPERIA X8 General

Hi guys
i'm writing here to ask you only one thing: can anyone create a new xrecovery update.zip in order to autoinstall jit without using adb?
I've seen it in this thread: http://forum.xda-developers.com/showthread.php?t=902974 and there is a similar one for x10 big
Hope you like my idea

Here we go..
To install:
You will need to extract the 2 files from the .rar archive and then rename the one you want to "update.zip" (Without the quotes) and copy to your SD Card. Then reboot yor phone and start xRecovery... choose "Install update.zip".

does this thing really work???

50 views and no one who has made a feedback?
thanks for your sharing but i'd like to know someone who had tried it

shpit said:
Here we go..
To install:
You will need to extract the 2 files from the .rar archive and then rename the one you want to "update.zip" (Without the quotes) and copy to your SD Card. Then reboot yor phone and start xRecovery... choose "Install update.zip".
Click to expand...
Click to collapse
Make disable JIT too . thanks

nobooody said:
Make disable JIT too . thanks
Click to expand...
Click to collapse
So does it works?
I posted it in the android development thread (with thanks to the author)
your feedback could be great even in that thread

i have install it and the Quadrant gave me the score of 514 points... so this thing really work???

I've answered you in the other post

could you post a E15a version?
Thanks!

Here you are the official thread http://forum.xda-developers.com/showthread.php?t=946231
for 2.1.1 and 2.0.1
I'm not sure about be ok on e15a (i've tried on e15i)
Feedback would be amazing

I've installed this script but Quadrant display a score of ~500.
It doesn't seem to be very efficient...
After that I've tried Racht ROMs and Quadrant score are two times better !
(My favorite is the 2.3.2 CM ROM)

My Score is between 490 - 507 ? Are u sure this is work ?
Sorry...my English is poor !

Any pro guide for Jit ?
From here : http://forum.xda-developers.com/showthread.php?t=877565
dalvik.vm.heapsize=32m
debug.sf.hw=1
From the Autoinstall (Xrecovery)
dalvik.vm.heapsize=30m
debug.sf.hw=1
1 is 32 m and 1 is 30m ? got different ?

Thanks , I installed JIT successfully , although I didn't notice any improvement

I have installed CUSTOM ROMs FLoyo and Gingerbread and now im back in eclair but apps in my ext2 dont work. I have to install it again or?

Hello,
I'm have a X8 E15i.
Firmware: 2.1_update1
Kernel: 2.6.29
Build: 2.0.1.A.0.47
I have installed Xrecovery. Then i have downloaded JIT and placed it as 'update.zip' in the root of my SD card...
When i boot into Xrecovery, i get the option menu. I choose 'install update.zip'
I see now the green logo, but nothing happens (even after 15minutes!)
When i press the buttons, i get the menu again.
When i choose 'reboot phone', i get the green logo again, and nothing happens (even for more than 15 minutes!)
I rebooted my phone by taking out the batterie...
What am i doing wrong?
Tx!

use HOME button as ENTER

tx for the hint!
I was pushing the wrong button...
Before: score 442
After: score 496
Any possibility to make it even higher?
grz.

iv made a jitexperiment with 2.1 rom.
using both 30 and 32 heapsize n few setting free ram.
I use quadrant many times.. never gave a same score..
the best score out when testin quadrant 4 times on a row with 32 mb heapsize.
516.
now, missin my score with racht rom..

what best app to test quadrant?? i see in market lots of apps to test bencmark of cpu, is that same meaning with quadrant score??
my x8 scrore more than 500, without jit. is that good?? (i use smartbench2010.apk)

Related

[Q&A] Question and Answer for Wildpuzzle ROM

I think I am the first one who did 'Question & Answer' section in XDA.
I will answer and solve any of your question related to WILDPUZZLE ROM ONLY
Let me introduce myself, I'm 16-year-old and currently studying in a secondary school. So I will only be able to answer your question at 2pm-6pm (GTM+8) and 10pm-11pm (GTM+8) weekdays.
Here is one of my guide if you are asking me how do you to get 165mb in wildpuzzle rom v2.2.1.
My Wildfire
How to make a custom boot animation
If you're having some problem about your wildfire, you can mail me or send me a message in facebook. I will try my best to reply you ASAP.
Here is the link:
Facebook: Melvinchng @ Facebook You can post on my wall / send me a message to ask me question, I'll reply u ASAP.
Gmail: [email protected] (I'll reply ASAP and please leave your name and problems.)
There is some questions and answers in second thread.
Thanks,
From Melvinchng
Wildpuzzle Rom 2.2.1 FANS...
HTC Wildfire @ 710mhz/768mhz
16GB Class 4 Kingston SD card
with 165mb phone momory.
Melvinchng @ Facebook You can post on my wall to ask me question, I'll reply u ASAP.
Melvinchng @ Twitter
Melvinchng @ Plurk
Gmail: [email protected] (I'll reply ASAP and please leave your name and problems.) [new mail]
Please press THANKS button if you feel it is useful and it can make me happy!
Question and Answer for Wildfire and Wildpuzzle ROM.
How do you root a wildfire?
Use Unrevoked 3.21. Is it safe? Yes, it is 99.9% safe. Just don't unplug your phone and make sure that your computer is good in condition and it won't restart automatically.
After root, what should I do?
After root, you need a ROM or you can use your original ROM. Here is the list of ROM
Which ROM do you prefer?
Currently I am using Wildpuzzle ROM v2.2.1 and I feel that it is cool.
What is the difference between original ROM and custom ROM?
Custom ROM such as wildpuzzle ROM v2.2.1 unlocked a lot of feature such as live wallpaper in sense, pre-install apps can be deleted and so on. Custom ROM is smoother and gives you more internal memory.
Which ROM is faster? Original or Custom?
After root, you can use custom rom with overclock kernal. Wildfire can be clocked up to 768mhz which is 240mhz more than the original frequency.
How do you install Wildpuzzle ROM v2.2.1?
Just visit my How to get 165MB in Wildpuzzle ROM v2.2.1 thread and anything about installing rom, it will be listed there.
If I am using Wildpuzzle ROM v2.2.1 0.6 and i want to update to 0.7. What should I do?
Here is the problem most of us face. Just download 0.7 and go recovery, install zip from SD and press install. Wait for few minutes, it will become 0.7.
If I want to change my ROM and I want to move my apps to other ROM. What should I do?
First, go market and download on the fly backup.
Then, all your apps will be kept in SD card as APK file.
After you installed your ROM, just open your SD card, all apps will be there.
Press install, and you have all your apps back.
I want the feature that Wildpuzzle ROM v8.0.11 has it, and Wildpuzzle ROM v2.2.1 dont have. What should I do?
Some feature such as enable trackpad to wake only available in v8.0.11 and not v2.2.1. Just download it from V8.0.11 and install it. I will be working.
When I open some of my games, it showed weird stuff such as bad graphic. What should I do?
Because wildfire is a quite low end phone, it doesn't support HD games such as NFS Shift. There is no way to fix it.
Why my angry bird is not working in wildfire?
1st, open angry bird apps.
2nd, when the game is loaded (when you can listen the music), press screen off button.
3rd, switch on screen again and it will work.
What frequency do you use?
I am using 710mhz (performance) when battery >0.0*C (degree Celsius), 122-480mhz (on demand) screen off.
How long can your wildfire battery last for?
I am using 24/7 WCDMA network. With full WCDMA network (full bar) + Mobile Network on, it will last about 4-5hours while ebuddy is on and screen doesn't off.
Do you use Task Killer?
No, I read a thread about task killer. It is bad if you are keep killing your apps.
What if partition not working? Showed >> [a Triangle with a Exclamation point]
1st, try take out your battery and try reboot and partition it again.
2nd, if it is still not working after several tries, try to go market and download the ROM Manager in market.
After partition, your files still in SD card?
1st, try go partition again.
2nd, your phone isn't root yet.
3rd, try another SD card.
When you want to connect your SD card by using Card Reader, it shows "You have to format before using it"
1st, try to get a new Card Reader.
2nd, try another SD card.
I need to change the size of my ext, How??
1st, backup your phone
2nd, copy SD to PC
3rd, go menu > setting > sd and phone storage > unmount SD > format sd
4th, create partition
5th, copy SD from PC
6th, go recovery, restore your phone
7th, all ext and files will restore to ext.
8th, restart and done.
I want cache move to ext. what should i do??
If you are using Wildpuzzle rom 0.6 (or any rom that supported ext cache), you can just install 0.8 and your ext cache will continue working.
I want the apps that have in Wildpuzzle rom 0.6, and 0.8 doesn't have it. How???
Dont worry, you can create your own update zip or apps and install it by visiting How to create your own zip?
My google map navigation is not working? I want it? How?
Just download Brut Mode google map 4.6 and install it. It will work for ANY country.
Special Thanks to anyone that link my page.
More Q&A coming soon.
Thanks,
From Melvinchng
Wildpuzzle Rom 2.2.1 FANS...
HTC Wildfire @ 710mhz/768mhz
16GB Class 4 Kingston SD card
with 165mb phone momory.
Melvinchng @ Facebook You can post on my wall to ask me question, I'll reply u ASAP.
Melvinchng @ Twitter
Melvinchng @ Plurk
Gmail: [email protected] (I'll reply ASAP and please leave your name and problems.) [new mail]
Please press THANKS button if you feel it is useful and it can make me happy!
RESERVED by melvinchng
track pad to wake
i tried installing the patch from the old wildpuzzle via recovery.. not working though.. is there anything i missed? pls help.. thanks..
Wat patah do you mean
Sent from my HTC Wildfire using XDA App
Enable trackpad to wake is working. I'm using now
Sent from my HTC Wildfire using XDA App
enable trackpad to wake
can you pls upload the files need it badly. thanks!
Please refer the link
Sent from my HTC Wildfire using XDA App
enable trackpad to wake
found it! thanks man! i have to press tackpad+power to wake
It's normal..
Sent from my HTC Wildfire using XDA App
that was very informative thanks
help required
hi i use htc wildfire a330 and cm7 nithybulls. when i tried to install wildpuzle rom in it give error .i have attached the error message image
i have did all wipes(factory reset,cache,user data one by one in order) all the time it gave same error
please help me in this regad
You need to use ROM Manager
Install Rom manager
Click Flash recovery
Click reboot into recovery
Flash from there.
You will need to lower the current CWM... flash the file i attached for you (it will temporary lower the cwm version), and then flash wildpuzzle
nejc121 said:
You need to use ROM Manager
Install Rom manager
Click Flash recovery
Click reboot into recovery
Flash from there.
Click to expand...
Click to collapse
this dint work but thanks for ur reply
thanks
thanks aca902 for your help.that worked excelent. If u have patience can you please tell why i cannot flash the wildpuzzle rom with latest version of cwr.
and can somebody tell how to remove flashed applications.
thnak you
You can't flash it because 3.0+ are using Edify scripting because of Gingerbread.
Almost all 2.2 roms are in Amend scripting which isn't supported by 3.0+
nejc121 said:
You can't flash it because 3.0+ are using Edify scripting because of Gingerbread.
Almost all 2.2 roms are in Amend scripting which isn't supported by 3.0+
Click to expand...
Click to collapse
thanks for the info is there any way to change system messages like slide down to unlock etc
hi how can i overclock my phone(wildfire) in wildpuzzle rom.
what are the safe min/max frequencies
thanks
you can overclock by flash an overclockable kernel and than install "Set CPU". Here's the kernel : http://rom.tat.tw/wildfire/wildpuzzlerom/2.2/patches/0130_kernel_overclock_jacob_2.6.32_v1.zip

[Q] x8 does not overclock

Hi everybody...
I know I'm not a dev, but I like to explore my android phone. So you are developing, and right after i'll be trying to do it... on my own
I believe I followed all the steps refered in x8 overclock module thread in devs section, but since I can't ask this there, i'll ask it here.
1st - Download and unzip x8oc.zip (the right version), then copy x8oc.ko to system/lib/modules (I'm sure the file is there, system is mounted rw).
2nd - Edit hw_config.sh on pc with notepad++ (my edited file is attached) and "glue it" back to system/etc after editing.
3rd - Reboot... and then what?! It reboots, but when I go to set cpu, I have same frequencies as before (122-600mhz). So, my x8 is not overclocked right?!
Beside this steps do I need to do something else?! In set cpu, do I select any device configuration or just auto detect frequencies?!
Do I need to set custom frequencies in any other files?!
I've just tried lot's of changes and nothing worked.
Please help me on this...
I'm using floyo 0.15 on my x8, rooted and with xrecovery on it...
Thank you all
the attachment is correct..and don't change the set cpu. i use the same roms like yours
Do you think that having baseband version 006 instead of the 015 could be the cause for this problem? I never updated it...
Because, I've done it again without touching set cpu and still no overclock... If you say it's correct, then I really don't know what else could it be...
Thank anyway for the reply
I think it is very influential on baseband cuz for the rom said that use xx15,...if yours non xx15 so try to change it ...what you've applied on the hw_config is same on mine so it's quitely correct.
Hi mate
So, I'll tell you what i've done.
Went to SE's site and repaired to the original 2.1 so restarted the phone, updated to baseband 015, then root, then xrecovery... and then, installed miniCM. As you know, miniCM has an update.zip to easily overclock it to 710MHz.
I tried it and it worked fine. BUT! I prefer Floyo 0.15 (the best till the moment for me) and so I tried to do something, when I restored back to Floyo.
Adding the code to the original hw_config.sh in floyo's file didn't work again. So I thougt... Let's trie to put MiniCM's hw_config (the file that comes in the update.zip) to floyo's system. And... It's working FINE!!! I'm currently running at 749(x27)Mhz and it doesn't go off... it's stable. Also handles 767(x28)Mhz but it's not so stable. Now I'm really satisfied with my overclocked x8.
But there is one reason that made me think of where was the mistake.
When I opened floyo's original hw_config and added the code, in notepad++ it was apparently correct and the visual configuration of the file was equal to miniCM's hw_config file (already with the code). But, when I opened the both in wordpad, the file I edited had the same format as in notepad++ and the file from MiniCM had all together and a different layout. So I thought that it was possible that android wasn't reading the file well, since the configuration of the code was different. And it worked so smoothly
So my question is, does notepad++ write in the language needed for this to work?! or is there anything needed to change in order to make it legible to android system?
Thanks again
Sorry for all this noob questions, but since you use the same rom as mine, it's a good chance to ask what I don't know. lol
Our rom comes out with app2sd pre installed right?
So it was suposed that I could move some programs to sd.
But, when I go to settings/apps manager There's the option to move apps to sd, but they all say "fail moving the app".
What do I have to do to make it work well?! Heard that the sd had to be partitioned. What program did you use to do that?!
That's the only thing left to make x8 perfect and full of memory lol
Thanks
I managed to OC it manually to 710 MHz in miniCM6, BUT no performance increase was detected. Quadrant score was consistently lower (~750) compared to no overclock (~850),
Any ideas?
I OCed it to 719MHZ with miniCM and i really felt an improvement. Switching menus and sliding on the home-screen (GO launcher) is really smoother.
Quadrant-Standard-Score:
@600MHz (ON DEMAND): ~520
@719MHz (PERFORMANCE): ~920
MaScXDA said:
I OCed it to 719MHZ with miniCM and i really felt an improvement. Switching menus and sliding on the home-screen (GO launcher) is really smoother.
Quadrant-Standard-Score:
@600MHz (ON DEMAND): ~520
@719MHz (PERFORMANCE): ~920
Click to expand...
Click to collapse
and about battery life, noticed any difference after OverClock your Phone?
biscoitu said:
and about battery life, noticed any difference after OverClock your Phone?
Click to expand...
Click to collapse
it drains a bit faster with the PERFORMANCE-govenor, but my phone is loaded every night anyway.
It is even less important to me, because when it reacts faster, i don't need to have it turned on as long as when it is laggy. And the display really needs most of the battery-power, so i may even save battery, when i can turn it off earlier.
Return to 600mhz
I can not use the overclock because when I reboot the phone it is on 691Mhz soon after he returns to 600mhz. I know that the CPU clock is dynamic, but he never returns to 691mhz. What did I do wrong? I used the XDA tutorial for overclocking.
Don't work yet
I just try full wipe and did not work. I think it's some parameter or file permission...

[Q] How do i install G3MOD v2.0 ROM

Well, I downloaded"G3MOD v2.0.rar"
When i extracted the file i got "system.img" usually it's .tar
I couldn't flash it with Odin
And the instructions to install the ROM isn't mentioned.
1) Install G3Mod 1.7 (Pick a edition out of the 4).
2) Copy system.img in /sdcard/Android/data/g3mod/G3MODv2_ROM
3) Go into the recovery mode (shutdown the phone, press VOL UP + VOL DOWN + HOME + POWER button to start the phone, when GT-I5800 text pops up release the POWER button and keep on pressing VOL UP VOL DOWN and HOME buttons until you are in recovery screen).
4) Go into Multiboot and select the G3MODv2_ROM and let the phone boot up. Might take several minutes.
aced443 said:
well, i downloaded"g3mod v2.0.rar"
when i extracted the file i got "system.img" usually it's .tar
i couldn't flash it with odin
and the instructions to install the rom isn't mentioned.
Click to expand...
Click to collapse
hey bro relax.. We r here to help u in every possible way.. But first i need to know uer phone specs in order to help u.. Try to edit uer signature.. Second image file of g3mod is for g3mod 1.7 kernel it has a multoboot facility. All u do is "flash g3mod kernel 1.7" and see the magic.. And dont forget to thank dharam(its his kernel) when u dwnload it.. Glad to help.
Guys its not working for me!!
I flashed G3MOD 1.7 Ultimate kernel in my Stock ROM
Then i copied system.img in /sdcard/Android/data/g3mod/G3MODv2_ROM
And made a "back up" of my current ROM and "switched" to "G3MODv2_ROM"
This is how it looks now:
Help,!!
Anyone?
Jai-tulip said:
Try to edit uer signature..
Click to expand...
Click to collapse
You can't build a signature with under 10 posts or so.
What's wrong with the sreenshots you show?
Mine doesn't look like how its supposed to ,
It looks just like the stock ROM except the icons look smaller than before
I wanted mine to look just like this -
Have a look at the first post of the development thread.
[ROM] G3MOD v2.0 - Released
It says "Stock Theme" under ROM Features.
Aced443 said:
Guys its not working for me!!
I flashed G3MOD 1.7 Ultimate kernel in my Stock ROM
Then i copied system.img in /sdcard/Android/data/g3mod/G3MODv2_ROM
And made a "back up" of my current ROM and "switched" to "G3MODv2_ROM"
This is how it looks now:
Click to expand...
Click to collapse
Hey.. If you have already flashed it like it was mentioned earlier in the thread.. You should be running G3Mod v2.0 .. And the theme.. Not to worry.. That is the theme of v2.0 ..
Using kyrillos 7.0 now. what if i dont want to use multibbot, that means only one ROM at a time. how to do it then?
will I have to repartition my sd. using 512 and 128 mb as swap with kyrillos.. plzz reply.
How i can install app2sd v2 on G3mod?
I've already partitionned my sd card with CWM, but I don't see app2sd space in Titanium Backup and I'm already out of memory...
Do i must use G3Mod app?
Thanks for reply! (if you reply )
Edit : It's working
Zelantine said:
How i can install app2sd v2 on G3mod?
I've already partitionned my sd card with CWM, but I don't see app2sd space in Titanium Backup and I'm already out of memory...
Do i must use G3Mod app?
Thanks for reply! (if you reply )
Click to expand...
Click to collapse
for convenience , use g3mod app.. or see how kyrillos stated to apply his app2sd..
bizjoya said:
Using kyrillos 7.0 now. what if i dont want to use multibbot, that means only one ROM at a time. how to do it then?
will I have to repartition my sd. using 512 and 128 mb as swap with kyrillos.. plzz reply.
Click to expand...
Click to collapse
Well, when we're talking about "Multi boot" we dont exactly mean the kind of Multi-boot on your PC, like Linux and Windows, where you have to make different partitions for both the OS
Here, we are just switching one ROM to another from CWM Recovery. So basically what that mean is, you are using one ROM at a time
Hope that's clear
bizjoya said:
Using kyrillos 7.0 now. what if i dont want to use multibbot, that means only one ROM at a time. how to do it then?
will I have to repartition my sd. using 512 and 128 mb as swap with kyrillos.. plzz reply.
Click to expand...
Click to collapse
If you dont want to use multiboot, then you dont have to. You can use 1.7v as any other Kernel with One ROM as well. Multiboot is an additional functionality added by DharamG so that we can, if we want have another ROM, without having to flash it using ODIN all the time. It is of great value for testers and those of us who like to try out new ROMs. You can as well use 1.7 on Kyrillos 7..it will work great.
help
Zelantine said:
How i can install app2sd v2 on G3mod?
I've already partitionned my sd card with CWM, but I don't see app2sd space in Titanium Backup and I'm already out of memory...
Do i must use G3Mod app?
Thanks for reply! (if you reply )
Edit : It's working
Click to expand...
Click to collapse
How did you solve the problem? i`m in the same situation. (i`m not out of space but i want to use app2sd)
Fixed: I took the app2sd-v2 script from here and stick it to /system/etc/init.d/ then factory reset.

[Scripts] The Legit Zip (Feb 8, 2012) & Nifty Coniptions Tweaks v1.01

Updated tweaks are at bottom of this post
Here is a flashable zip of 3 scripts that when put together speed up your phone and make it faster.
The niftyconiptionstweaks was meant only for the HTC Evo 4g but if your phone supports "init.d" then try it out if you want to and please report back. It may not even flash in recovery because the phones are different but its worth a shot. If it works, please post saying it does and what kind of phone you have. The Legit Zip should work for any phone.
To determine if your phone supports "init.d", download a file manager like Root Explorer or ES File Explorer, go to "system", then "etc". If you come across a folder named "init.d" then your phone may support it.
I did not write these scripts, I just edited them to work like Car-O-Dopes tweaks. It basically has the same values as Car-o-Dopes tweaks. It is best to use this on a Sense rom. I used the S97ramscript, KickAssKernel, and 02sictweaks but I changed the values of each script to match what Car-o-Dopes tweaks do, and I wanted to share this with you all because it makes installing these tweaks easier and faster. Thanks to zeppelinrox for the kickasskernelizer, Juwe11 for the S97ramscript, Smokinl1337 for the 02sicktweaks, coffehandle for giving me the idea when he made his own tweaks, and Car-o-Dope for coming up with the ultimate combination of out-of-memory settings and sysctl tweaks that make your phone smooth as butter.
I use this on my HTC Evo 4g running Shooter E3D, with AnthraX kernel and it works like a charm.
I am in no way responsible if your device messes up or anything unwanted happens to it. Use at your own risk.
http://dl.dropbox.com/u/40376256/niftyconiptionstweaks.zip
Instructions: Follow Exactly
1) Make a nandroid backup incase something goes wrong or you want to revert.
2) Download a file manager like Root Explorer or ES File Explorer (I use Root explorer).
3) Open up root explorer and go to "system", then "etc", then "init.d". Click on the "Mount R/W" button so it turns to "Mount R/O" (that way you can delete files).
4) Delete any or move to a folder on your sdcard (incase you want to revert) any ram scripts or ram tweaks you may have that is in the "init.d" folder (examples of ram scripts or tweaks are 01sysctl, 06sysctl, 02sicktweaks, S97ramscript, 99supercharge, and 98Kickasskernel).
5) Also if you are running v6 supercharger, you need to un-supercharge. If you are running Kickass Kernelizer, you need to un-kernelize and do not run those scripts while you have the niftyconiptionsscripts installed.
6) Uninstall any ram manager apps or task killers and do not use these.
7) After you uninstall all of that, reboot your phone and verify that none of the scripts you had before are still installed. (it will mess with the scripts you are about to install).
8) Boot into recovery (preferably Amon Ra).
9) Once in recovery, you need to mount /system, then mount /data.
10) Find the niftyconiptionstweaks.zip you downloaded and flash it.
11) After you flash the zip, go back and unmount /system. Don't mess with the /data because after you flashed the zip, it automatically unmounted the /data for you.
12) Reboot phone and enjoy. Let your phone set at the lock screen for about 2 minutes, unlock and let it set for another 2 minutes to let it settle in. Your phone will become dramatically smoother after about an hour.
UPDATE:
Nifty Coniptions Tweaks
Updated niftyconitpionstweaks. Install just as you would before and follow directions as posted above. I got rid of some unnecessary settings in the scripts. Also your sdcard read ahead speed will change to 512kb which is the optimal value for the evo.
Sense Version
http://dl.dropbox.com/u/40376256/Nifty-v1.01/niftyconiptionstweaks-Sense-v1.01.zip
AOSP Version
http://dl.dropbox.com/u/40376256/Nifty-v1.01/niftyconiptionstweaks-AOSP-v1.01.zip
The Legit Zip
http://dl.dropbox.com/u/40376256/Nifty-v1.01/TheLegitZip.zip
Here is The Legit Zip I just put together. This has the same settings as the V6 Supercharger on option 8 and the Kickasskernalizer. I did not change any values to these so its the same as installing those two scipts manually. Again, I did not write these scripts, I just put them into a tweak bundle to make it easier to install. Thanks to zepplinrox for making the V6 supercharger and the Kickasskernalizer. To install this, follow the same instructions in the first post.
To see if the settings stuck, download Rom Toolbox Pro and go to the performance tab, Kernel tweaks or Sysctl Tweaks (depending on what version of the application you have) and see if it reads as Min Free KBytes - 4096, Dirty Ratio - 95, Dirty Background Ratio - 60, VFS Cache Pressure - 10. Then go to the Auto Memory Manager and see if it reads as 6,12,150,165,180,200.
If you would like me to add another version of the V6 Supercharger just let me know.
Have fun and hit that thanks button if you like it.
Your script are compatible with android 2.X or 4.X ?
2.x
Sent from my Nifty Shooters E3D 4g while sick with Anthrax. Hit that thanks button if I managed to help.
scottypeterson said:
2.x
Sent from my Nifty Shooters E3D 4g while sick with Anthrax. Hit that thanks button if I managed to help.
Click to expand...
Click to collapse
so that means I can use it on my GT-I9001 2.3.6 customROM ?
Work great, tks so much
Sent from my LT18i using xda premium
does this slow down internet or the phone usage?
and does it work on the lg optimus s?
amskhan1 said:
does this slow down internet or the phone usage?
and does it work on the lg optimus s?
Click to expand...
Click to collapse
This does not slow down your internet and this makes your phone run faster.
Sorry, as far as I know it won't work on the Optimus S but you can use The Legit Zip i just uploaded.
Just updated the tweaks and added a new one. The Legit Zip. Hope you all enjoy. Hit the thanks button if you do
scottypeterson said:
Just updated the tweaks and added a new one. The Legit Zip. Hope you all enjoy. Hit the thanks button if you do
Click to expand...
Click to collapse
I'm asking again if will work on sgs+ (GT-I9001) with a 2.3.6 custom rom?
Sent from my GT-I9001 using Tapatalk
chasemyass said:
I'm asking again if will work on sgs+ (GT-I9001) with a 2.3.6 custom rom?
Sent from my GT-I9001 using Tapatalk
Click to expand...
Click to collapse
Like I said in the OP. Idk if it will work or not for any other phone besides the evo, that's why I have it in this section to find out what phones it will work for. If it does, please report back, The Legit Zip should work with no problems though.
Sent from my Nifty MikG'd up EVO 4g while eatin some Chop Suey.
Hit that thanks button if I managed to help.
Hey am I suppose to flash this or use terminal bkuz terminal is not working
via rebel W/ a cauze rebel rom 2.1
dswaggz said:
Hey am I suppose to flash this or use terminal bkuz terminal is not working
via rebel W/ a cauze rebel rom 2.1
Click to expand...
Click to collapse
Flash it
Sent from a Nifty Tomatoe
Hit that thanks button if I managed to help
OK an should I kill any other ram type scripts or apps b4 doing so
via rebel W/ a cauze rebel rom 2.1
dswaggz said:
OK an should I kill any other ram type scripts or apps b4 doing so
via rebel W/ a cauze rebel rom 2.1
Click to expand...
Click to collapse
Yeah, read the op. All instructions are there. Just make sure you follow step by step except skip steps 9 & 11 on these updated tweaks.
Sent from a Nifty Tomatoe
Hit that thanks button if I managed to help

HOW TO MAKE A MONSTER !! From Your Xperia Arc S

MONSTER ARC - S
This is a combination that seems to be working fine after lots of testing and all thanks to @jader13254 !!! and im just a Proud Legacy Device Owner!!!!
An Xperia Arc S with 300 apps ( includes System Apps) a Battery Endurance of more 30 hrs ( usage includes 10 mins of wifi , 1/2 hour of songs , travelling through different towers ( Signals ) 2g mode! all through the day ( NO LAG!!, ZERO LAG!!! )
If you would want to know what to do ... here is the reciepe ( Those who dont want to.... plz dont read the below Secret Formula )
Take Backups ( of everything you love) DO A NANDROID BACKUP just in case u wanna get back to ur phone like a TIME MACHINE!!
1) Contacts
2) messages , girl friends pics etc etc
PERFORM SUPER CLEAN WIPE ( go to cwm , wipe data , cache ,system, dalvik, battery stats etc etc )
1) Lupus Kernel -> http://forum.xda-developers.com/showthread.php?t=1867265
2) Ultimate HD ROM 5.0.1 -> http://forum.xda-developers.com/showthread.php?t=1920207
3) A Class 10 Micro SD Card SDHC ( preferably) ( 8GB or 16GB or higher)
Now Before we begin ,
Download
1) Minitool Partion wizard http://download.cnet.com/MiniTool-Partition-Wizard-Home-Edition/3000-2094_4-10962200.html
or
2) Doom Kernel http://forum.xda-developers.com/showthread.php?t=1520654
Download both in case you wanna revert back to a Full 8/16 Gb again
Steps ( Assuming Backup is taken and Phone is completely Wiped and Blank!!
1) Place Micro SD card inside ( Make Sure its in FAT32)
2) switch off Phone
3) Connect to PC in Fastboot Mode
4) Flash the Doom Kernel
5) reboot phone and enter CWM and partition SD Card !!! to make an ext2 for about 2/4GB !!! (Based on 8Gb or 16 GB card) and ensure swap is zero .
6) Once Partition is Complete ( In case u Faced difficulties)
1) Use Minitool and Split the 8/16 into 2/4 GB of Ext2
7 ) flash Lupus Kernel
8) Flash Jadder's 5.0.1 ROM
9) Wonderful!!! your getting your MONSTER Stronger!!
10) ensure you download LINK2SD app !!! that from Play Store or install it from your sd card if you have one .
NOW DOWLOAD TERMINAL EMULATOR!!! from Play Store and install it
11) Enter the LUPUS MENU IN TERMINAL EMULATOR!!
We are doing this to make the kernel tweak and speed up the SD Card R/W operations ( ie it can support ext2 partition)
12) first type SU
13) then type LUPUS
you will enter a menu
Option -6
and in that choose Option 8 and place it at highest Value!! of CACHE
OK NEXT .....
14) OPEN LINK2SD and follow below easy Steps and link the apps perfectly !!
http://tutorial-fornewbie.blogspot.in/2013/04/how-to-use-link2sd-on-android-device.html
15) Now Once your Partition is established you can OVERLOAD YOUR XPERIA ARC -S with Unlimited Apps and Enjoy the
POWER OF A LEGACY MONSTER ! DEVICE!!!!!
COMING SOON..... i am currently Exploring the LUPUS Kernel Menu and noticed that we can Enable the OTG Support in Lupus and Guess what
40 inch MONSTER ARC - S- COMPUTER
Requirements are simple
1) 40 inch Smart Tv with HDMI Support
2) Wireless keyboard and Mouse
3) MONSTER ARC - S
4) ANDROID VNC
5) UBUNTU OR BACKTRACK R5
6) OTG CABLE
Steps will be coming soon.....
Please Click Thanks if you think i Helped or even amazed you
STEPS TO MAKE A MONSTER UBUNTU UHD Work
download the following...
1) ANDROID VNC - https://play.google.com/store/apps/details?id=android.androidVNC
2) COMPLETE LINUX INSTALLER - https://play.google.com/store/apps/details?id=com.zpwebsites.linuxonandroid
3) TERMINAL EMULATOR - https://play.google.com/store/apps/details?id=jackpal.androidterm
4)UBUNTU image - http://forum.xda-developers.com/showthread.php?t=1390351
or this is direct download link - http://downloads.sourceforge.net/pr...id/files/Ubuntu/&ts=1390636677&use_mirror=ncu
extract and keep in SD under root/ubuntu/
install other apps
open complete linux Installer and launch the image
open the launched terminal emulator and choose screen size as 800 x 454
open VNC and ENJOY!!!!
Reply to this thread if you tried it!! ,,,, and kindly click thanks if u liked it !!!
shouldnt this be in the general...
Sorry -
Mr.RainBurn said:
shouldnt this be in the general...
Click to expand...
Click to collapse
How Should i Move it now
xperia_rebel said:
How Should i Move it now
Click to expand...
Click to collapse
ask the mod
this is only for UHD from jader?
eadmokong said:
this is only for UHD from jader?
Click to expand...
Click to collapse
no..... let me know which Kernel and ill let u Know
xperia_rebel said:
no..... let me know which Kernel and ill let u Know
Click to expand...
Click to collapse
i'm using in zip kernel from carbon kk
eadmokong said:
i'm using in zip kernel from carbon kk
Click to expand...
Click to collapse
why dont you make a ext2 and try !
xperia_rebel said:
why dont you make a ext2 and try !
Click to expand...
Click to collapse
I have an lt15i and it”s awesome with the extended internal memory and unh 5.0.1 + lupus kernel v16,also have mt11i like that. greenify all heavy aps and it is like a new phone!
alexuEJS said:
I have an lt15i and it”s awesome with the extended internal memory and unh 5.0.1 + lupus kernel v16,also have mt11i like that. greenify all heavy aps and it is like a new phone!
Click to expand...
Click to collapse
Thats Great to Hear , Enjoy the Arc !
Well, I have done it quite similar that you did.
I only didn't use doom kernel for partitioning sd card.
My class 10 8gb has second partition of 1gb ext3, that is enough for my use.
In lupus menu through TE I have CACHE 1024. Don't know what is your value... ?!?
Now I have installed around 40 apps. most of them i have greenefied.
I experience modest lag.
Before I had 3 times the same configuration and tested performance on around 80 apps. There was heavy lag. Even When I uninstalled most of apps.
I always format everything. I have 3 peaces of 8gb SD cards that have myself tested R/W speeds around 20/12 mb/s.
I formatted them 7/1 and 6/2 ... doesn't matter.
Now I experience lag, when using internet browser and someone calls me, or if I want to make call... when using numpad, there is lag. I also have to wait to respond to call.
So my arc s is not even close to speed monster.
After all that you have written, you didn+t mention nothing about tweaking cpu speed...
On my last flash and install I haven't tweaked cpu, cause I experienced heat on the back side of phone and no noticeable advance in speed.
Greg
Lupus Kernel allows OverClocking!!.... 1.6 Ghz with Intellidemand or Interactive will do for normal Use !!
Now I'm flashing again... this time with 32gb SD class 10 with max speeds of around 36mb/s-17mb/s, r-w. I formatedit 27,5gb fat32 / 2 gb ext3.
still don't know if 1024 should be max cache value for ext3... in lupus through terminal emulator...
Greg
8670
I love UHD with Lupus 16, it very fast
Xperia T ICS with ktg kernel is very good.
Go try. Ty!
I'm totaly lost in all this, I'm new and it's hard for me to understand all this stuff.
I have Arc S LT18i, Android 4.0.4, rooted, but dont know how to do all this.
How to install this Lupus Kernel?
Can somebody guide me better ?
Legacy kernel
How to enter this menu via terminal emulator for Legacy kernel.
bihman said:
I'm totaly lost in all this, I'm new and it's hard for me to understand all this stuff.
I have Arc S LT18i, Android 4.0.4, rooted, but dont know how to do all this.
How to install this Lupus Kernel?
Can somebody guide me better ?
Click to expand...
Click to collapse
to install custom kernels you need to unlock your bootloader (can do it officially from sony)
http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
after this its need to install kernale manually via cmd OR flashtool, there plenty of tutorials in ARC forum how to do this
good luck !
komar_666 said:
How to enter this menu via terminal emulator for Legacy kernel.
Click to expand...
Click to collapse
you can enter recovery (kernel menu) via:
reboot menu --> reboot device --> rboot to recovery (need be activated 1st in dev settings "show more reboot options")
or press CONTINUESLY volume down on very 1st boot screen (legacy xperia)
good luck!
Instead of flashing the Doom kernel to partition the SD card, or using Minitool, is it possible to partition it on a computer using gparted? Also, is the LUPUS kernal flashed using fastboot, or can it be flashed in CWM?

Categories

Resources