[Q&A] Question and Answer for Wildpuzzle ROM - Wildfire General

I think I am the first one who did 'Question & Answer' section in XDA.
I will answer and solve any of your question related to WILDPUZZLE ROM ONLY
Let me introduce myself, I'm 16-year-old and currently studying in a secondary school. So I will only be able to answer your question at 2pm-6pm (GTM+8) and 10pm-11pm (GTM+8) weekdays.
Here is one of my guide if you are asking me how do you to get 165mb in wildpuzzle rom v2.2.1.
My Wildfire
How to make a custom boot animation
If you're having some problem about your wildfire, you can mail me or send me a message in facebook. I will try my best to reply you ASAP.
Here is the link:
Facebook: Melvinchng @ Facebook You can post on my wall / send me a message to ask me question, I'll reply u ASAP.
Gmail: [email protected] (I'll reply ASAP and please leave your name and problems.)
There is some questions and answers in second thread.
Thanks,
From Melvinchng
Wildpuzzle Rom 2.2.1 FANS...
HTC Wildfire @ 710mhz/768mhz
16GB Class 4 Kingston SD card
with 165mb phone momory.
Melvinchng @ Facebook You can post on my wall to ask me question, I'll reply u ASAP.
Melvinchng @ Twitter
Melvinchng @ Plurk
Gmail: [email protected] (I'll reply ASAP and please leave your name and problems.) [new mail]
Please press THANKS button if you feel it is useful and it can make me happy!

Question and Answer for Wildfire and Wildpuzzle ROM.
How do you root a wildfire?
Use Unrevoked 3.21. Is it safe? Yes, it is 99.9% safe. Just don't unplug your phone and make sure that your computer is good in condition and it won't restart automatically.
After root, what should I do?
After root, you need a ROM or you can use your original ROM. Here is the list of ROM
Which ROM do you prefer?
Currently I am using Wildpuzzle ROM v2.2.1 and I feel that it is cool.
What is the difference between original ROM and custom ROM?
Custom ROM such as wildpuzzle ROM v2.2.1 unlocked a lot of feature such as live wallpaper in sense, pre-install apps can be deleted and so on. Custom ROM is smoother and gives you more internal memory.
Which ROM is faster? Original or Custom?
After root, you can use custom rom with overclock kernal. Wildfire can be clocked up to 768mhz which is 240mhz more than the original frequency.
How do you install Wildpuzzle ROM v2.2.1?
Just visit my How to get 165MB in Wildpuzzle ROM v2.2.1 thread and anything about installing rom, it will be listed there.
If I am using Wildpuzzle ROM v2.2.1 0.6 and i want to update to 0.7. What should I do?
Here is the problem most of us face. Just download 0.7 and go recovery, install zip from SD and press install. Wait for few minutes, it will become 0.7.
If I want to change my ROM and I want to move my apps to other ROM. What should I do?
First, go market and download on the fly backup.
Then, all your apps will be kept in SD card as APK file.
After you installed your ROM, just open your SD card, all apps will be there.
Press install, and you have all your apps back.
I want the feature that Wildpuzzle ROM v8.0.11 has it, and Wildpuzzle ROM v2.2.1 dont have. What should I do?
Some feature such as enable trackpad to wake only available in v8.0.11 and not v2.2.1. Just download it from V8.0.11 and install it. I will be working.
When I open some of my games, it showed weird stuff such as bad graphic. What should I do?
Because wildfire is a quite low end phone, it doesn't support HD games such as NFS Shift. There is no way to fix it.
Why my angry bird is not working in wildfire?
1st, open angry bird apps.
2nd, when the game is loaded (when you can listen the music), press screen off button.
3rd, switch on screen again and it will work.
What frequency do you use?
I am using 710mhz (performance) when battery >0.0*C (degree Celsius), 122-480mhz (on demand) screen off.
How long can your wildfire battery last for?
I am using 24/7 WCDMA network. With full WCDMA network (full bar) + Mobile Network on, it will last about 4-5hours while ebuddy is on and screen doesn't off.
Do you use Task Killer?
No, I read a thread about task killer. It is bad if you are keep killing your apps.
What if partition not working? Showed >> [a Triangle with a Exclamation point]
1st, try take out your battery and try reboot and partition it again.
2nd, if it is still not working after several tries, try to go market and download the ROM Manager in market.
After partition, your files still in SD card?
1st, try go partition again.
2nd, your phone isn't root yet.
3rd, try another SD card.
When you want to connect your SD card by using Card Reader, it shows "You have to format before using it"
1st, try to get a new Card Reader.
2nd, try another SD card.
I need to change the size of my ext, How??
1st, backup your phone
2nd, copy SD to PC
3rd, go menu > setting > sd and phone storage > unmount SD > format sd
4th, create partition
5th, copy SD from PC
6th, go recovery, restore your phone
7th, all ext and files will restore to ext.
8th, restart and done.
I want cache move to ext. what should i do??
If you are using Wildpuzzle rom 0.6 (or any rom that supported ext cache), you can just install 0.8 and your ext cache will continue working.
I want the apps that have in Wildpuzzle rom 0.6, and 0.8 doesn't have it. How???
Dont worry, you can create your own update zip or apps and install it by visiting How to create your own zip?
My google map navigation is not working? I want it? How?
Just download Brut Mode google map 4.6 and install it. It will work for ANY country.
Special Thanks to anyone that link my page.
More Q&A coming soon.
Thanks,
From Melvinchng
Wildpuzzle Rom 2.2.1 FANS...
HTC Wildfire @ 710mhz/768mhz
16GB Class 4 Kingston SD card
with 165mb phone momory.
Melvinchng @ Facebook You can post on my wall to ask me question, I'll reply u ASAP.
Melvinchng @ Twitter
Melvinchng @ Plurk
Gmail: [email protected] (I'll reply ASAP and please leave your name and problems.) [new mail]
Please press THANKS button if you feel it is useful and it can make me happy!

RESERVED by melvinchng

track pad to wake
i tried installing the patch from the old wildpuzzle via recovery.. not working though.. is there anything i missed? pls help.. thanks..

Wat patah do you mean
Sent from my HTC Wildfire using XDA App

Enable trackpad to wake is working. I'm using now
Sent from my HTC Wildfire using XDA App

enable trackpad to wake
can you pls upload the files need it badly. thanks!

Please refer the link
Sent from my HTC Wildfire using XDA App

enable trackpad to wake
found it! thanks man! i have to press tackpad+power to wake

It's normal..
Sent from my HTC Wildfire using XDA App

that was very informative thanks

help required
hi i use htc wildfire a330 and cm7 nithybulls. when i tried to install wildpuzle rom in it give error .i have attached the error message image
i have did all wipes(factory reset,cache,user data one by one in order) all the time it gave same error
please help me in this regad

You need to use ROM Manager
Install Rom manager
Click Flash recovery
Click reboot into recovery
Flash from there.

You will need to lower the current CWM... flash the file i attached for you (it will temporary lower the cwm version), and then flash wildpuzzle

nejc121 said:
You need to use ROM Manager
Install Rom manager
Click Flash recovery
Click reboot into recovery
Flash from there.
Click to expand...
Click to collapse
this dint work but thanks for ur reply

thanks
thanks aca902 for your help.that worked excelent. If u have patience can you please tell why i cannot flash the wildpuzzle rom with latest version of cwr.
and can somebody tell how to remove flashed applications.
thnak you

You can't flash it because 3.0+ are using Edify scripting because of Gingerbread.
Almost all 2.2 roms are in Amend scripting which isn't supported by 3.0+

nejc121 said:
You can't flash it because 3.0+ are using Edify scripting because of Gingerbread.
Almost all 2.2 roms are in Amend scripting which isn't supported by 3.0+
Click to expand...
Click to collapse
thanks for the info is there any way to change system messages like slide down to unlock etc

hi how can i overclock my phone(wildfire) in wildpuzzle rom.
what are the safe min/max frequencies
thanks

you can overclock by flash an overclockable kernel and than install "Set CPU". Here's the kernel : http://rom.tat.tw/wildfire/wildpuzzlerom/2.2/patches/0130_kernel_overclock_jacob_2.6.32_v1.zip

Related

[Q] Is there a newbie's guide for this phone?

I understand there's a tips and tricks thread that explains things in more detail but how does somebody go from just getting the phone to installing, or even understanding, things like obsidian, onyx, morphing and learning what the basic functions of such programs are.
The question I currently have is concerning flashing custom roms. In the tips & tricks thread, it talks of froyo builds (ex: bionix & frankin-twiz). What is it exactly? From what I understand, it sounds like a mini os that you install onto your device which helps in applying different functions to it, which makes custom roms possible.
I'm currently trying to get http://forum.xda-developers.com/showthread.php?t=845530 to work on my vibrant. Can anybody help a newbie out?
VibrantUser1 said:
I understand there's a tips and tricks thread that explains things in more detail but how does somebody go from just getting the phone to installing, or even understanding, things like obsidian, onyx, morphing and learning what the basic functions of such programs are.
The question I currently have is concerning flashing custom roms. In the tips & tricks thread, it talks of froyo builds (ex: bionix & frankin-twiz). What is it exactly? From what I understand, it sounds like a mini os that you install onto your device which helps in applying different functions to it, which makes custom roms possible.
I'm currently trying to get http://forum.xda-developers.com/showthread.php?t=845530 to work on my vibrant. Can anybody help a newbie out?
Click to expand...
Click to collapse
the link you posted is just to a theme.
to get the theme to work you'll need to be running obsidian first.
so lets see, the easiest way to explain the different versions 2.2, 2.1 1.6, 1.5 and so forth is this...
its pretty much like going from windows 95 to 98 to 2000 to xp to vista and so forth.
our vibrants come with android 2.1, 2.2 is the next version of the os to come out (basicaly like moving from vista to windows 7)
the different roms like obsidian and Macnut and such are just names that the developers gave their roms.
what happens is a developer starts out with a version of android (in the case of Macnut and Obsidian this is 2.2)
and then they add their own modified tweaks and such to it.
and so in the end they get Obsidian which is a modified 2.2
or Macnut which is also a modified 2.2
they differ a bit though as Obsidian is based almost totaly on a leaked version of 2.2 for the US vibrant, where Macnut is based alot on the 19000 version of 2.2 for the european phones.
so when choosing a rom just choose the base you want first: 2.1 or 2.2
then look through the tweaks on a few roms and read some of the thread for that rom untill you get a feel for what makes it unique
you can also just experiment by flashing a rom for a day or so and then switching to a new one untill you find one you like.
Morphing is a way to apply a theme to a rom, this does not generaly change functionality at all, it only changes apearance.
alot of themes are either morphs (you install them using metamorph, which is an app from the market)
or they also come in zip format (which are installed by flashing from recovery)
for the theme you posted you will need to flash obsidian, and then flash the zip for the theme afterwards.
have you rooted your device yet?
thats the place to start, if you need help just pm me or repost here and I'll do what I can.
also, there is a "newbie's guide":
http://forum.xda-developers.com/showthread.php?t=732458
nearblack said:
also, there is a "newbie's guide":
http://forum.xda-developers.com/showthread.php?t=732458
Click to expand...
Click to collapse
lol true true
Before you even want to start with anything, you have to learn what 'rooting' your phone means.
Without root, you won't be able to do any of the above. You might be able to download the programs necessary, but you won't be able to use them.
For ex. Titanium Backup, ROM Manager, etc.
We use ROM Manager to install different ROMs on our phones.
Much to read, my young grasshopper.
OP, I made the Tips/Tricks sticky... would you PM be exactly what you think it lacks? I want to make sure it is applicable to everyone... I thought it was straight-forward, perhaps not.
my phone is rooted. So how do I go about flashing obsidian?
I thought roms were the same as themes? What's the difference?
And just to clarify I understand the tips and tricks thread is sort of the newbies guide but even then theres a lot of terminology that a new user wouldn't understand. I just wanted some basic information that would allow me to transition into the tips and tricks thread more easily.
I appreciate the responses so far
Have you download Rom Manager from the Market? If not, do so.
Then follow the instructions (in the sticky) to flash the recovery (it's the top of the list when you open Rom Manager).
Assuming you did that, you can reboot into recovery, make a backup of your system.. something you can always come back to (a timestamp of your system at that moment).
Download the ROM you want, put it on your internal memory (sdcard/....) NOT in a folder.
Go to Clockwork recovery, choose to insall a zip from sd card... select the name of the ROM and then click Yes to install it.
It will run it's course, then you can just reboot when done.
The first bootup will take a long time (10 minutes probably)... let it boot.... leave your phone alone for like 10 or so minutes after bootup (suggested by Team Whiskey, I never really do this).
It's that easy.
Think of a ROM as an OS... the developers take Froyo (2.2) or Eclair (2.1) and make a lot of tweaks, remove things, add things... basically anything to enhance the user experience.
THEMES are something you flash over a custom ROM... it can change the icons, graphics, notification bar, etc... they are cosmetic. You see in my signature I have Axura 2.0.3 (amazing rom and there is a newer version out) and then I have BlackFroyo (which is the theme) on top of the ROM to change the look of things. Axura has a steel looking notification bar, I much prefer black (hence the theme I chose).
The ONE thing that can be confusing... if you make a backup right now (you have stock eclair), if you flash a froyo rom... you would need to flash either the stock eclair kernel (the download link is also in the sticky) to restore your nandoid backup.... OR, you could just flash another ROM that has a kernel (most do) and you would be good to go too.
And addition to this is to make sure your phone is NOT hardware locked.
To test it:
1) Take out battery from the phone and put it back in again
2) The USB cable plugged into the computer (not in the phone yet)
3) Push and hold down both of the Volume buttons at the same time
4) Plug in USB cable and it should take you into the Download mode.
If it does you are good to go. Just read some about Odin and Stock Android
If it isn't you need to make sure to flash JI6 to your phone (also Stock) onto your phone using Stock Manager. That should fix your hardware locked. Go over the above steps to make sure that is the case.
At this point, I have rooted my device and downloaded rom manager.I believe I have backed up everything after following the directions and I do have the blackfroyo.zip on my sd card and for some reason it won't "go" (although I'm sure there's a step I am missing here, something with obsidian) so that wasn't much of a surprise.
Edit: I noticed I tried to use a theme on there and not the obsidian "OS" (idiot) when I tried the backup thing with rom manager. Where can I download the most recent version of obsidian and/or is axura an acceptable alternative?
VibrantUser1 said:
Edit: I noticed I tried to use a theme on there and not the obsidian "OS" (idiot) when I tried the backup thing with rom manager. Where can I download the most recent version of obsidian and/or is axura an acceptable alternative?
Click to expand...
Click to collapse
Been working on updating the wiki. Please check out http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_SGH-T959#ROMs for the different ROMs currently available.
^^ both are solid. I prefer Auxura *no touchwiz*.... download it from the development section. Place in on the internal (sdcard/ ) and flash it, reboot... I would let the phone chill for awhile then reboot again.... THEN if you want, start messing with the theme. You can see from my signature you and I are similar.
to the OP, I started a noob friendly guide in the Q&A section. Please let me know exactly what you want in there.
Here is a video guide, its kinda old but the principles are the same.
http://theunlockr.com/2010/08/02/how-to-load-a-custom-rom-on-the-samsung-captivate-vibrant/
I have been browsing around and reading on XDA since I got my G1 on release day. I have since upgraded to the MYT3G and now to the Vibrant. I have always used XDA as a source of information for rooting, etc. I don't post very often, but, I would like to throw props out to all the individuals in the thread, this is one of the few threads I have read on XDA that no one got flamed for being a "noob" and asking basic info, the information given was clear, accurate and very helpful. No one pointed to using the search function, everyone just gave good answers. AWESOME
I hope to see more threads like this in the future. Bravo and well done to all.
So I tried installing obsidian 5 and this is what happened. I first put the zip file on my sd card, I did all the necessary prerequisites (I think) using rom manager, flash recovery > vibrant yada yada yada and then pressed install rom from sd card and chose the obsidian zip file. Then the phone starts backing itself up and it finally reaches a point where it says (E: Can't open/sdcard/sd/obsidian_v5_beta.zip (no such file or directory) Installation aborted.
I then try to navigate to the file from the menu but whenever I click the sd file, it just exits, I think it says that no zip file is found or something but when I boot it up normally afterwards, the file is still there.
But the file is within the sd file . . . what am I doing wrong? I tried to fix permissions thinking it was that but no luck.
You probably need to move to the rom to the internal sd card. I thought you're able to add it to the external with the recent update but perhaps not
Sent from my GT-I9000 using XDA App
bellrb19 said:
You probably need to move to the rom to the internal sd card. I thought you're able to add it to the external with the recent update but perhaps not
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
the rom IS on the sd card, unless you mean the memory on the actual phone itself
ROMs go on the root of the internal memory (no folder)... drop it in sdcard/
Also, this was mentioned in Post 8, and in team whiskeys install guide. Please pay attention to details.
oh okay, this whole time I've been thinkin the sd card folder was the root folder. Well I have finally put obsidian with success and now I'm having a difficult time implementing http://forum.xda-developers.com/showthread.php?t=845530. I have downloaded the zip file but I don't understand what "flash it through clockwork recovery" means. It kinda sounds like I should use something in rom manager but I'm not sure, I have tried to reboot into recovery through rom manager with no luck.
I've also tried using metamorph but when i choose the blackfroyo.zip file, it says that the file is invalid and that the theme control file could be missing. Am I doing something wrong here as well?
Thanks for all your help so far, I really appreciate you taking time out of your busy life to help an individual with (what may be to you) simple problems
VibrantUser1 said:
oh okay, this whole time I've been thinkin the sd card folder was the root folder. Well I have finally put obsidian with success and now I'm having a difficult time implementing http://forum.xda-developers.com/showthread.php?t=845530. I have downloaded the zip file but I don't understand what "flash it through clockwork recovery" means. It kinda sounds like I should use something in rom manager but I'm not sure, I have tried to reboot into recovery through rom manager with no luck.
I've also tried using metamorph but when i choose the blackfroyo.zip file, it says that the file is invalid and that the theme control file could be missing. Am I doing something wrong here as well?
Thanks for all your help so far, I really appreciate you taking time out of your busy life to help an individual with (what may be to you) simple problems
Click to expand...
Click to collapse
From where you are now. Make sure the zip file is in the internal sd card, Open rom manager go to install rom from sd card then choose the that file then click ok and CW will do its thing. Also this is only for Obsidian v4.2 and Auxura 2.05. Good luck! Also you should make a nandroid back up first just in case.

Overclocking HTC Wildfire

Hey Guys,
Being a PC overclocker I felt like a fish out of water when it comes to overclocking a phone
I recently got a HTC Wildfire and found out how to root it and flashed my own ROM, Kenral etc. (with some difficulties)
So I downloaded SetCPU and started OC'ing. Being a PC overclocker I followed the logic of set speed and run stability test.
So I slowly started upping the max speed and then stress testing for 20 min odd. I just kept on upping the speed until I got to the limit of SetCPU (768Mhz). Where to from now?
I have not changed the minimum speed because I have read that it can make your phone rather unresponsive.
Is it possible to go above 768Mhz or will I damage the phone or have to up voltage?
I ran linpak and at 768Mhz I got just under 3 MFLOPS. Is that good or bad or what?
Thanks in advance guys
Mikrouwel
768 is the safe limit, you'll need to make a kernal that will allow the processor to go further, 3mflops is good on a sense ROM but on an AOSP ROM you will get over 5 easily. Why do you want to go over 768 anyway?
What is the difference between sense and AOSP ROM? If it is just the sense feture then I dont mind changing ROMS. (Dont use sensce)
Also what is Cyanogenmod 7 RC1? Is it the same os CM7? Seem alot of people talking but dont now what it is?
Thanks
Mikrouwel
AOSP -> Android Open Source Project. It is vanilla Android, without Sense. So Yes, your assessment is correct. It is just the Sense feature.
Cyanogenmod 7 = CM7. Just a short way of writing it.
Hi There
Is Cyanogenmod 7 a ROM?
Also is Android Open Source Project ROM too or a app?
Sorry kinda confussed
Also what is Clockworkmod Recovery? Does it have something to do with ROM Manager?
Thanks
Mikrouwel
1: Yes, CM7 is a ROM
2: AOSP Official Page: http://source.android.com/
3: Recovery Images are found whenever you boot into Recovery. Example: All that you see like Clear Cache, Install ZIP from SDC etc. are part of a recovery. ROM Manager is a standalone app and is not related to Recovery, although, it can help update the recovery since the developer of Clockworkmod Recovery and ROM Manager are the same.
Technical Definition of Recovery: (Sourced from Turkeys Ultimate Guide Glossary)
The recovery partition is a boot-mode for your phone that allows you to wipe your settings from the #data partition of the phone (a hard wipe), or perform an update using an update.zip file on the root of the microSD card. It is common (although not necessary) to flash a patched Recovery image, such as Amon RA's one. This allows you to run Nandroid backup from the device, and flash modifications, such as update.zip files to the device, essentially becoming a means to install sotware to the device. Recovery mode is separate from 'normal' mode, and can be entered by holding down home whilst turning the phone on.
Oh, you should probably go through Turkeys guide and glossary yourself. It should help a lot.Thread : http://forum.xda-developers.com/showthread.php?t=824396
Glossary : http://bit.ly/9HtICk
Many thanks Guys,
ATM I am using this ROM with this kernal. Were can I download CM& and will the notiable differences be between the one im using and CM7?
Also what is New Nightly? (You have #13 next to yours?)
Thanks alot guys
Mikrouwel
CM7 can be found here:
http://forum.xda-developers.com/showthread.php?t=918072
Or, the latest, i.e. RC2 can be found here:
http://forum.xda-developers.com/showthread.php?t=957140
Nightlies are automated builds created by the Build bot. If you check the first link I posted, in that post's download link, you will find new nightlies everyday. Nightlies implement minor code changes, and, are experimental releases. They may add new features (eg: Nightly #11 implemented Android 2.3.3, #13 implemented FM Radio etc.), but may also add new bugs sometime.
As for differences, one cant say for sure, since ROM preference is a personal choice. Try it, if it suits you, use it, else, switch back.
Hi There,
I am going to try CM7.
IS the RC2 stable and if so is it more or less stable than RC1?
Also if I just go into recovery and flash will I have to flash nightlys or not?
If I am not mistaken it runs 2.3 and I thought that there were many features that didnt work on 2.3? (Gingerbread)
Also what kernal do you recommend I should use on CM7 that will let me got 768+?
Many many thanks guys for all the help
Oh yes and what app do I use if I want to keep all my apps and contacts and stuff like that? I used titanium backup last time and only got like half the stuff back?
Thanks Guys
Mikrouwel
* RC2 is stable for me. No issues so far, although camera sound bug is still there - If you take some pics using flash, phone loses all sound and you have to reboot.
* After RC2, it is upto you whether you want to flash nightlies or not. There is no compulsion.
* Can you list some features that dont work on 2.3? Personally, I cant find anything amiss over 2.1 / 2.2
* CM7 comes by default with an overclocked kernel, which will allow OC to 768. Overclocking beyond 768 is not possible since that is the safe limit for the Wildfire's CPU. Because it is overclocked by default, if you get a bootloop, flash HCDR.Kernel v4.1 after flashing CM7. This will restore stock clocks, but, still allowing OC using an app like SetCPU
* Apps can be backed up using Ti backup / Mybackup Pro etc. Contacts can be backed up by going to Contacts > Export > To SD Card. Then, after flashing, again going to Contacts > Import > From SD Card, and select the VCF File. SMS'es can be backed up by using the free SMS Backup App from the market.

Need help please guys ( htc tattoo room )

HELLO EVERYBODY ..
I JUST NEED TO KNOW HOW 2 UPGRADE MY **** 1.6 ROM FOR 2.1 OR 2.2 ROM
BUT PLEASEEEEEEEEE WITH VIDEO COZ IM SORRY I DONT UNDERSTAND THE ANDROID YET ...
I JUST JUMPING FROM WM TO ANDROID BUT I CANT FOUND ANY FUN YET WITH ANDROID SYSTEM !
SO PLEASE GUYS I NEED HELP ANY ONE CAN HELP ME 2 SEE HOW I CAN UPGRADE A ROOM ON HTC TATTOO ?
THANKS FOR THE BEST FORUM ON THE WORLD
I LOVE xda
Go for 2.3.3 more like it
Sent from my HTC click using XDA Premium App
First of all you need to root your phone. Take a look in this thread and follow section 1.5. Instead of the recovery file suggested by the instruction, use the one from this thread. (Otherwise you won't be able to flash Gingerbread)
You have now rooted your phone and flashed a custom recovery program. Now you'r ready to choose a rom. I would suggest nFinityGB from arco. Just download the rom you like and put it on your SD card. Reboot your phone into recovery and DO A FULL BACKUP. Do a wipe/factory reset and flash the new rom (flash zip from sd card or something like that). Reboot the phone and have PATIENCE, the first start can take up to 5 to 10 minutes. Enjoy!
If you run in to any trouble, search! I can almost guarantee that your problem is not entirely new or unique, if it is; feel free to ask for help
yh nfinity gb is best man
guys i try a rooting way but hmmmmm give me error with rootTattoo app
its give me after its runing on dos screen ( no space left on the device ) !!!
& i have 2 gb card & all well ?
what i can do now
format everything and reset phone then try again is easiest way haha. never had an issue with flashing roms or rooting so don't even really know where to look but that i bet will work
same error
no space left on the device + ADB This should list a device as a long number always give me error cant found the ADB !!!!!!!!!!!!
why u don't make one tool or app with all that command 2 help us !!!!!!
really its 2 much 2 do .................!!!!!!!
why u cant make it easy guys !!!!!!!!!!!
DJFUNK said:
same error
no space left on the device + ADB This should list a device as a long number always give me error cant found the ADB !!!!!!!!!!!!
why u don't make one tool or app with all that command 2 help us !!!!!!
really its 2 much 2 do .................!!!!!!!
why u cant make it easy guys !!!!!!!!!!!
Click to expand...
Click to collapse
Be quiet man!
There are development tools using here and all the thread - tutorial mentioned above are very good.
Did you download the android-sdk to get adb? If yes, you should go with the terminal in the platform-tools folder to launch adb.
im really get so sad ....... i was think i can found fun with my tattoo
C:\androidsdk\tools>adb devices
'adb' is not recognized as an in
operable program or batch file.
so thats why im asking why if u are real good programmers
why u cant make easy for normal users !
or even 2 make the errors less
really tell now no one can found good way for help me !
even i do whatever u say guys but its ........ give errors always
adb is now in the platform-tools folder of android-sdk (like I told before...).
dud ya i fix the adb problem now we back again for
no space left on the device !!!
that happen when i use rtattoo tools when i make rootTattoo always give me that error ?
& already i have 2gb memory card ..........!!
& i make factory data reset be4 i start with rtattoo & i format the sd !
no space left on the device !!!
that happen when i use rtattoo tools when i make rootTattoo always give me that error ?
& already i have 2gb memory card ..........!!
& i make factory data reset be4 i start with rtattoo & i format the sd !
The memory is not the SD card space but the internal memory of the phone.
the internal phone space 150 mb
& the sd card space 1.83 Gb
that is what i found on the phone !
Use Universal Androot and ROM Manager much easier without PC
Sent from my HTC click using XDA Premium App
I have only encountered the "no space left" error once and that was when I missed a step in the manual rooting process. I didn't have any problem with the automated rooting tool mentioned in the FAQ and no problems at all when I did the manual rooting following each and every step carefully.
Sorry but I have know idea what causes the problem if you are following the instructions.
Andy, I've been reading about Androot and ROM Manager since you posted.
I have the standard 1.6 version from HTC, using Androot and ROM Manager I can use any of the rom's posted here in xda or do I need something else?
Did you rooted and flashed your tattoo this way?
Thanks
SkL_opt said:
Andy, I've been reading about Androot and ROM Manager since you posted.
I have the standard 1.6 version from HTC, using Androot and ROM Manager I can use any of the rom's posted here in xda or do I need something else?
Did you rooted and flashed your tattoo this way?
Thanks
Click to expand...
Click to collapse
Yes I sure did...it took a while of rebooting and removal of battery etc but finally it worked....
http://www.google.com.eg/imgres?imgurl=http://i1.hk/d/attachments/day_100119/20100119_64e954583a928400eee7laEo6ofUf2tT.jpg&imgrefurl=http://geesgadget.blogspot.com/&usg=__juKcd5xgdQZ3YpgRHJbShZefjaY=&h=487&w=480&sz=42&hl=ar&start=127&zoom=1&tbnid=fwsHW3hOrKatuM:&tbnh=129&tbnw=127&ei=cbe4TZeLL6DZ4waBrKgB&prev=/search%3Fq%3Dandroid%2Brebooting%2Berror%26um%3D1%26hl%3Dar%26sa%3DX%26biw%3D1280%26bih%3D609%26tbm%3Disch0%2C3135&um=1&itbs=1&biw=1280&bih=609
GUYS I GET THAT ERROR NOW
PLEASE HELP ME ........ IM REALLY GET IN SHET MOOD 2 BUY THE HELL ANDROID
WM IS MUCH BETTER
NO ONE CAN SOLVE THE CASE & NO ONE CAN MAKE ONE PROGRAM FOR SETUP THE NEW ROM
TELL NOW IM ON 1.6 & NO WAY 2 CHANGE IT ALL THE WAYS FILED ?
SO ANYONE HAVE IDEA 2 OPEN MY BOOT PAGE
ALREADY THE PHONE DON'T CASE TO THAT PAGE ALWAYS GIVE ME ERROR WITH PHONE LOGO & ! .............
& I MUST TAKE THE BATTERY OF & PUT IT AGAIN COZ ALL FREEZE ?

How to back up and change roms without screwing up?

Hi i just rooted my legend... was a hell of a ride because i encountered a lot of problems which most of noobs like me have encountered it while experimenting with the rooting process...
i was already stock OTA 2.2 with HBOOT 1.01...
Read several guides to get comfortable and prepared for the journey... in the end , i spent over 6 hrs to get it done... All the problems that ppl have been having boils down to the goldcard... i knew about it but never knew what to expect because in the downgrading step the gold card was not an issue and in the rooting process, it was!
im glad this part is over... i was able to flash the blayo's rom .
Now i feel like trying out new roms, so here's the questions:
1. I have TiBackUp PRO and the Free ROM Manager. Already backed up the Blayo's ROM
2. If i want to try the CM as so many others are doing to try Gingerbread... Is it a matter of going into ROM Manager and choose the CM versions?
3. How do i reload all my apps and settings without redoing everything manually?
4. If the CM is screwed up and doesnt boot, can i just go to recovery and flash a back up?
I just want to make sure i can try new roms without having to reset up all apps like wifi, gmail account...etc
Also, if the CM are buggy and doesnt allow my phone to booot if there is a way to reload my stable blayo rom?
Thanks
sorry i got no answer for you ... but the same think i want to try and i would like to know if and how is that possible ... to return on old rom with all app what we add Manuel . before we try new rom and did not like it..
h-e-a-v-e-n: Why did you even bother writing that?
QkSi1ver: nandroid is a part of your solution for you! That can backup and restore any ROM as a whole thing. Or you can restore only part (/system for instance...)
The other problem might not be solvable, as you will be going from one ROM to a whole differrent one...B08.4 and CM7 are completely different and I dare say no backup program will backup all apps and their data so it would work with such transition (tried Titanium, MyBackup and some other apps...) You can port contacts, messages, calendar evens, but you'd have to set up all you need.
Also there are programs that can batch-install your favorite apps, but you'd still have to set those up
Good luck with messing with it
Dr.Romca said:
h-e-a-v-e-n: Why did you even bother writing that?
Click to expand...
Click to collapse
Just counting posts
For QkSi1ver : I use "Tit..Backup and root " and I'm pleased with it
It can backup and restore " ... Whole app + data ..."
However u have to setup something like Google account and other manually ant to install TitBackup manually as well . Be sure whenever backup or restore to check " App+Data "
Finally the most important ( for me at least ) - the phonebook : I allways store it in my G--account . Good luck .
P.S. : At least u have a sheet of paper and a pencil for the phonenumbers an free time for setting up your phone again
It was a joke
P.S.2 : Be aware that some apps , backed up from one ROM may not work ( or even install ) properly to another , don't know why - should ask someone smarter
Thanks for all your response...
im just getting used to the ROm Manager and the CWM recovery that was installed through ROM Manager...
Correct me if i'm wrong.. if i happen to install onf oe the CM Nightlies and it doesnt boot into the OS, i would still be able to access the bootloader , into the CWM recovery which was intalled with ROM Manager and then load up my back up ROM from blayo right?
Right
Until you update to an uprooted ROM you should be able to access CWM recovery
An advice : use BlaY0's fake flash if you are S-on . It is smoother and easy to use
Sent from my HTC Legend using XDA Premium App
pappilion said:
Right
Until you update to an uprooted ROM you should be able to access CWM recovery
An advice : use BlaY0's fake flash if you are S-on . It is smoother and easy to use
Sent from my HTC Legend using XDA Premium App
Click to expand...
Click to collapse
I thought FakeFlash has been renamed to ROM Manager and was one and the same (since both were written by the same dev right?)
http://forum.xda-developers.com/showthread.php?t=698404
If they are different, what does FakeFlash do that the ROM Manager CWM Recovery doesnt do? Can you point me to the appropriate thread?
Thanks
ps: Damn I'm running out of space... any advice regarding the ext partitionon sd... does it work like it make the OS believe i have more space?
http://forum.xda-developers.com/attachment.php?attachmentid=535315&d=1299449412
Download this file , place it on the root of your SDcard and rename it to " update.zip " . Replace the existing one (if there is) .
About partitioning read this thread :
http://forum.xda-developers.com/showthread.php?t=907436
but I never had this problem so never needed to do this .
All I do is move personal ( downloaded ) apps to SDcard And I worry no more for the free space . At least I don't see why some buddys need so much free space .
I'm using BlaY0's B 0.8 and it is cofigured good enough to leave me a space on the machine .
pappilion said:
http://forum.xda-developers.com/attachment.php?attachmentid=535315&d=1299449412
Download this file , place it on the root of your SDcard and rename it to " update.zip " . Replace the existing one (if there is) .
About partitioning read this thread :
http://forum.xda-developers.com/showthread.php?t=907436
but I never had this problem so never needed to do this .
All I do is move personal ( downloaded ) apps to SDcard And I worry no more for the free space . At least I don't see why some buddys need so much free space .
I'm using BlaY0's B 0.8 and it is cofigured good enough to leave me a space on the machine .
Click to expand...
Click to collapse
I thought i had enough space too... until i started finding new tools available to root users...on top of my usual cant-live-wo
igo (30MB), camera 360 (6mb), swype (5mb) ..etc it runs out pretty quick
QkSi1ver said:
I thought i had enough space too... until i started finding new tools available to root users...on top of my usual cant-live-wo
igo (30MB), camera 360 (6mb), swype (5mb) ..etc it runs out pretty quick
Click to expand...
Click to collapse
" Titanium Backup and Root " has a batch that moves any app that you install ( beside the system ones ) onto SD card .

[Q] HTCHD2

Dear All Seniors,
as i am novice to android and recently bought HTC HD2 with android version 2.3.7 android i upgraded it to [Nov. 18, 2012][ROM][720p] NexusHD2-ICS-4.0.4-CM9-HWA V2.8 [NativeSD]. I have follwoing . I have attached my my snapshots of latest configuration for your reference.
I am facing following problems.
1. After installing new ROM [Nov. 18, 2012][ROM][720p] NexusHD2-ICS-4.0.4-CM9-HWA V2.8 [NativeSD]. my display area has been reducted from top to bootom and that space has been taken over by navigation bar.there is no option where i can removed or disable nevigation bar. and tell me how to incresed dispaly are..refer attached images.
2. facing memory low issue.
Plz Help !!
For the nav bar, there's an option in the settings. You just haven't searched well enough.
For the low space issue, flash an A2SD script or use Link2SD.
nav bar: see http://forum.xda-developers.com/showthread.php?p=34311060
Sent from my HTC HD2 using xda app-developers app
Reply
Nigeldg said:
For the nav bar, there's an option in the settings. You just haven't searched well enough.
For the low space issue, flash an A2SD script or use Link2SD.
Click to expand...
Click to collapse
Thanks for the reply yes ther is navigationa bar option but no enable disable buttons are present..plz provide scripts link to download
kiranjshedge said:
Thanks for the reply yes ther is navigationa bar option but no enable disable buttons are present..plz provide scripts link to download
Click to expand...
Click to collapse
Just search for 'Link2SD' on the Play Store. Note that this will require you to have an EXT partition on your SD card (see the flashing guide in my sig, it includes partitioning the SD) and if you haven't already partitioned it, the process will wipe your SD card. If you do still need to partition, please back up your data in Titanium Backup first.
I checked the nav bar settings in my ROM and it turns out it was an AOKP feature, not CM, so that's my bad sorry. I still think there must be an option to disable it somewhere. I used that ROM for a fairly long time and I somehow managed to disable the softkeys. Try going to the thread then using the thread search tool to find all of the posts related to the nav bar and see if any of the solutions provided work for you.
Hi
Nigeldg said:
Just search for 'Link2SD' on the Play Store. Note that this will require you to have an EXT partition on your SD card (see the flashing guide in my sig, it includes partitioning the SD) and if you haven't already partitioned it, the process will wipe your SD card. If you do still need to partition, please back up your data in Titanium Backup first.
I checked the nav bar settings in my ROM and it turns out it was an AOKP feature, not CM, so that's my bad sorry. I still think there must be an option to disable it somewhere. I used that ROM for a fairly long time and I somehow managed to disable the softkeys. Try going to the thread then using the thread search tool to find all of the posts related to the nav bar and see if any of the solutions provided work for you.
Click to expand...
Click to collapse
Hey, which ROM r u USING PRESENTLY ? PLZ PROVIDE LINK TO DOWNLOAD ? N INSTALLATION METHOD
K I R A N
Look in my signature for both things and search before posting, there's a difference between being a noob and just being lazy
Sent from my HTC HD2 using xda app-developers app

Categories

Resources