Database Users

screen corrupted / faulty

I got a serious problem with my mda vario here.
sometimes, 7 out of 10 times, when i get a call the screen gets totally corrupted and jumbled like on the picture in the attachment. i can only see black vertical lines on a white screen. in order to make the screen work properly i have to turn the phone off/on (stand-by mode) then.
does anybody know where the problem is?
i have to confess, that the phone slipped out of my hands and fell on the ground 3 times so far.
thanks

well, you say youve dropped it 3 times already? is it possible that something may be loose inside? is there cosmetic damages from dropping?

yes, there are some scratches on it. i don't really think that something is loose or broken, because the screen gets only on icoming calls corrupted.
so i don't think that it is due to a loose contact or something like that...

I have exactly the same problem. I personally think it is unlikely that dropping the phone has caused it as it corrects when you cycle the power button. Any help on this from other forum member would be much appreciated.

roads said:
I have exactly the same problem. I personally think it is unlikely that dropping the phone has caused it as it corrects when you cycle the power button. Any help on this from other forum member would be much appreciated.
Click to expand...
Click to collapse
Any resoluation this? I have the exact same problem!!

Oh dear ... somethings in the air...
mine's got it also. first time i saw it was a couple of days ago. only happens with the alarm clock in the morning :?
My phone is crap like hell... gotta hard reset and reconfig the damn thing. acting up lately...
(ps... AFAIK i barely dropped the phone... maybe 1 or 2 times. nothing more)

I have the same problem
I have read the service manual of wizard and said:
Unusual Vertical / Horizontal lines or partial display
(1) Check the connection of LCM FPC whether is properly connected. (Is a conector between motherboard and LCD)
(2) Try with another LCM. (LCM=LCD Screen)
(3) Try with another Main Board.
(4) Replace LCM if necessary
(5) Replace Main Board if necessary.
(6) Once the defective part has been identified, verify it again with the defective part whether the
symptom could be duplicated
Any sugestion?

Okay..
so far, i have installed Molski 2.26 rom (30meg free version) and upgrade the radio rom form 2.25 to 2.47.
I have not had another occurance of this so far.
Maybe a fluke.

Screen fixes when pressure applied to bottom of the screen
Guys,
I now have to keep my finger pressed hard against the bottom of the lcd unit to get the screen to display to work properly. it is under warranty with Imate but they want me to send it to Abu Dhabi for repair. I'm in Canada and concerned that I may not get it back.
So has anybody else identified this as being a loose connection rather that a real hard fault. Also has anybody fixed their unit by dismantling and reseating the connections.
Finally has anybody used the Imate repair service and was it timely & reliable?
Any advice would be appreciated.
Mick

This is a real hard fault.. had it with my mini s, took it into the shop, it was away 2 weeks... and in the end they gave me a replacement!!

I agree - took it completely apart and cleaned everything ....
And still have the issue.
Serves me right for buying something in Middlesbrough I suppose
It must be a hard fault with the LCD assembly. Will have to see how Dixons handles an overseas repair.
Take care & thx,
Mick

I had the same problem, in the end i took it into my local t-mob shop to have it repaired, they ended up sending me a new one.

Well, I've exactly the same problem since the past two-three weeks, it also occurs only in the morning. I'm living in the Netherlands and this is happening since it's rather cold over here, especially in the morning (3-4 degree Celcius). Since my bedroom window is open during the night, it gets rather cold in my room.
During the rest of the day it is +8 degree Celcius, and the phone works flawless. Maybe this problem has something to do with the Temperature?

Temperature
Bebob - don't thin so as I have had this problem for a number of months and the temp here in the summer is high (30+ degrees C)
It looks to be a bad connection type issue and may be a bad screen cable. It makes sense though that the issue is at the bottom of the screen cos this is where we press the select buttons all of the time.
Pls keep me posted on how you do. mine is going to a local repair shop (on my dime) tomorrow to see if they can fix it.
If not can any of you guys recomend a new unit that could be considered an upgrade to the KJAM ?
Many thanks
Mick

suggestions needed
friends, i have o2 mini s and got the same problem with screen for the last 3 weeks....
can anyone tell me that will the problem aggravate or else will i be able to use my cell properly for few months...
and also what will be the approx cost of repair..
all suggestions will be warmly appreciated...

It's happened to me as well. I have lived with that for one month now. It is happening, when I touch the cursor keys or when touch the lower part of the display. I tried "shaking/hitting" the xda and it looks better, so I assume it is a faulty connection cable.

I have active Cleartype and no more vertical lines for the past 2 days.
I seems to be a problem when background is white and leters are black.
Regards

similar problem
i dropped the phone (T-Mobile MDA Vario) and now when i turn it on the screen is fine for 5-30 seconds but then it scrambles, but works again if i smack the bottom of the phone on my hand!
t-mobile staff told me there are sensors to identify if it has been dropped. I'm suspicious that it could even be programmed to go "faulty" once it is dropped as the screen is fine for a limited time so it obviously works somewhat. do you know if this is the case? or what's happened? also is it a simple thing i could do myself? i didn't take out insurance so that's why i haven't just claimed off that as i'm really broke
Any help is appreciated
Regards,
Steve

whiteish screen / over temperature
hi,
I have a problem smilar at qtek 9100. I had upgade to my ppc wm5 to wm6 around 3 week ago and overclocked to 221 mhz with batery status today plug-in . 2 days ago Screen became whiteish (almost no contrast or over gamma) and working temperature is around 30c. I tried to re-flash with many kind roms but noting chaged.
Is there anybody has these kind of experice. If I can not solve. I am planing to buy new LCD ( I am not sure new LCD will solve the problem)
Thanks

Same problem here. Dropped it ONE time and the screen went crazy. Sent it to my t-mob shop and they got it repaired. They said in the report that they changed the "flex". Dunno if this helps.

[Q] New screen - weird spots problem

Broke my screen and fixed it at a lab a few days ago.
today I noticed weird dark spots where I press or when I bent the phone a little, I don't think I had this in my original screen.
A video of the problem is attached in a zip file.
Any one know what is the cause of this problem? will it get worse in time? is this indication the screen is not original LG maybe?
Thanks.

any one seen this problem before?

I've never seen that problem before. I do not think that it'll get worse over time but it's a definite indication that you've messed with your device. Just use it till it cracks, then get an original replacement

vPro97 said:
I've never seen that problem before. I do not think that it'll get worse over time but it's a definite indication that you've messed with your device. Just use it till it cracks, then get an original replacement
Click to expand...
Click to collapse
It is an original replacement, the screen was replaced in a lab, not in my house.
I took the phone back to the lab today and they told me it is common to see this in LG and Samsung phones after replacing screen.
I guess if it was common people here would know it....

Strange Display issue

Hello folks,
i have a very strange thing with the display of the new S7 edge from my girlfriend. And after reading arround 4 hours in the forum, i´ve decided to open a thread and asking for help.
I will try to explain what happend. The phone ist brand new and arrived today. After unboxing we running the first start process and during this i realized that the display had a "dead zone". In this zone it is nearly impossible to type or click someting. The rest of the screen works as intened.
After the start process the Nougat update runs and the issue is still there. While scrolling it looks like a lag, but there is no lag only these wired deadzone.
Can someone give a hint what this can be or is this a hardware issue?
I have 2 vids from the issue, but im not allowed yet to posted it here.
Thanks in advance so far.

You have dead pixels, which is not uncommon.
It is a screen issue which can be repaired by replacing the screen under warranty.
You just need to take it back to where you got an show the problem, they will either repair or replace.

I think he was refering to dead zone on digitizer. It doesn't register touch on some areas.
Type *#0*# in dialer and u will be prompted with test app, U have the display option there. Tap on it and U will figure out the rest. If it doesn't draw on that area of the screen, the digitizer isn't working and take the phone to samsung if it's under warranty.

Ghost touchscreen

Hi to everyone.
From 1 week my Mi9T has a ghost touchscreen.
How can i resolve it?

What do you mean by ghost touchscreen?

BranchPrediction said:
What do you mean by ghost touchscreen?
Click to expand...
Click to collapse
Screen responds to 'touches' you didn't actually make - like, there is a ghost touching your screen

oh, well i dont know how to fix that sorry. But maybe you touched the edge of the screen accidentally?

i have the same problem for about a week now! did you find any fixes?

me too

Me to. I have tried every possible solution. Eventually whole screen has been replaced on warranty.

No guys i dont find any solution. And now? How we can resolve it?

Pasquale91fg said:
No guys i dont find any solution. And now? How we can resolve it?
Click to expand...
Click to collapse
replacing the display is the only solution

i have the same problem, ghost touches in the upper side, near clock.. specially when phone is hot or i press the top of the phone

Im so angry ??? bc we have this phone not usable!!

It's a hardware failure. Faulty display. If you suffer from "ghost touches" you should back up the data you want to keep, and return your Device to where you have bought it from as it might still fall under warranty (depends op what the cause is, and where you live). This can also get worse over time making the screen partially unusable (which was in my case). contact the seller, or contact customer service from Xiaomi.
I suffered ghost touches at the beginning of December (owned the Device for at least a month). Tried every software options i found around internet that could resolve it, but it was to no avail. I proceeded to unlocking the bootloader, install TWRP, flash a custom rom... For a couple of days i was fine. After those few days the top part of the screen (the part with the status bar) rendered unusable, on custom rom and stock miui. Tested it and it seemed that the area increased and also decreased from now and then, which is strange. After contacting my seller they agreed on sending it back including screenshot and the tests i ran. 1 day after they received my device they contacted me to say that it cannot be fixed (or at least they didn't seem to bother as the phone's pricerange is low) and i am receiving a complete new one (this was in the weekend btw). After that weekend on monday i received the new one and it's running better then ever, even the fingerprint is much faster.
Now just as a warning, I don't say you still have warranty. i live in the Netherlands where unlocking, rooting and all that does not void warranty, and returning a product is very easy to do. But in other parts of the world the companies can screw you over so you'll have to check that.

For those who are asking what is it, juste have a look at mine in dev mode to show the touch : https://www.youtube.com/watch?v=-ZApYI9otJI

This happens to me only when I'm charging the phone, still annoying, , I think it's something to do with the voltage and could be fixed with a software update.

[HUAWEI P10 LITE] Screen burn, ghost images, but it's temporal

I'm new to this forum, so I posted in general this problem I'm having since I don't know which category fits for this.
I know this forum is for software-related topics, but I've found hardware questions as well, so I guess this should be fine.
Basically, some time ago my phone started having this problem, which I suspect is hardware related, which is what they call screen burn.
Funny thing is, people usually say this problem is permanent, but in my case it's just temporal.
Sometimes my screen is working just fine, and suddenly starts flickering. If I try to switch apps, a "ghost image" of the other app stays there in the background, and until the screen refreshes, it takes time, or maybe I have to switch my screen on-off again, etc.
Another times It turns white, but I still can use my phone properly.
I've identified it's just a screen issue, because as I said, I can actually use my phone fine, but I have this flickers and ghost images. These ghost images are actually the most annoying problem when they happen.
To do some testing, I downloaded a burn-in test app to check every colour, and I've noticed that most colours work fine, but just the white and grey were weird? Like, maybe in the top of the screen the colour wouldn't show, but in the rest of the screen it was working.
Other times, the screen starts to display "colour lines" in front of everything, and after some time they disappear.
Want I want to know is, is this a hardware problem, or software? I guess it's hardware, I'd find it weird to be software.
If so, changing the screen would fix this ghost images and flickers? I haven't tried changing a phone screen before, but I can just buy one and there are videos for my model on how to change the screen so I could do it.
What I want to know is, how to fix this, and If replacing the screen would do. I honestly am against the consumerism trend of throwing away phones, so I at least want to try.
Thanks.

adrianjaramillo said:
I'm new to this forum, so I posted in general this problem I'm having since I don't know which category fits for this.
I know this forum is for software-related topics, but I've found hardware questions as well, so I guess this should be fine.
Basically, some time ago my phone started having this problem, which I suspect is hardware related, which is what they call screen burn.
Funny thing is, people usually say this problem is permanent, but in my case it's just temporal.
Sometimes my screen is working just fine, and suddenly starts flickering. If I try to switch apps, a "ghost image" of the other app stays there in the background, and until the screen refreshes, it takes time, or maybe I have to switch my screen on-off again, etc.
Another times It turns white, but I still can use my phone properly.
I've identified it's just a screen issue, because as I said, I can actually use my phone fine, but I have this flickers and ghost images. These ghost images are actually the most annoying problem when they happen.
To do some testing, I downloaded a burn-in test app to check every colour, and I've noticed that most colours work fine, but just the white and grey were weird? Like, maybe in the top of the screen the colour wouldn't show, but in the rest of the screen it was working.
Other times, the screen starts to display "colour lines" in front of everything, and after some time they disappear.
Want I want to know is, is this a hardware problem, or software? I guess it's hardware, I'd find it weird to be software.
If so, changing the screen would fix this ghost images and flickers? I haven't tried changing a phone screen before, but I can just buy one and there are videos for my model on how to change the screen so I could do it.
What I want to know is, how to fix this, and If replacing the screen would do. I honestly am against the consumerism trend of throwing away phones, so I at least want to try.
Thanks.
Click to expand...
Click to collapse
Hi...
so it could be software or hardware based.
first i would make a full backup and then try to completly reset the firmware and check if the issue is done
if not...it could be the screen or the mainboard or the connector to the mainboard.
at first i would try to change the screen to a new one. mostly the screen have problems. if that not work it can be the mainboard...for a buying a mainboard i would look at ebay for a completly damage devices just to remove the mainborad there and to buod in to your Device
hope that helps you
solong
speedson

speedson said:
Hi...
so it could be software or hardware based.
first i would make a full backup and then try to completly reset the firmware and check if the issue is done
if not...it could be the screen or the mainboard or the connector to the mainboard.
at first i would try to change the screen to a new one. mostly the screen have problems. if that not work it can be the mainboard...for a buying a mainboard i would look at ebay for a completly damage devices just to remove the mainborad there and to buod in to your Device
hope that helps you
solong
speedson
Click to expand...
Click to collapse
I commented my problem with a friend who studied CS with me, and he told me after seeing the phone that in his opinion it's likely the screen. I think so too.
It's ebay a decent play for buying a screen? Or better aliexpress? I've seen screens for huawei p10 lite in aliexpress

adrianjaramillo said:
I commented my problem with a friend who studied CS with me, and he told me after seeing the phone that in his opinion it's likely the screen. I think so too.
It's ebay a decent play for buying a screen? Or better aliexpress? I've seen screens for huawei p10 lite in aliexpress
Click to expand...
Click to collapse
Hi...
Idk if ebay or Alie would be better. I would take a look wich one could send it fastest to me and if it is original Part or from another manufacture.

Hello, I've been experiencing same kind of issues in recent months and I'm interested how the story continued and did fixing the screen was the solution?
Thanks in advance.