Database Users

(elfin)bootloader

hello,i got a problem i tried to flash few roms and after when i tried them they were hanging up,so i downloaded another and i couldn't turn the phone several times but somehow it worked and turn on so,i was putting it on device by RUU and in 48% it stopped and show error message and after 4 steps i've done them and disconnected phone from pc,taken battery out that was in these steps and after when now i am trying to do a hard reset or soft reset it sometimes doesn't turn on and sometimes goes to bootloader that only what it's doing, i can't even do hard reset because it goes everytime to bootloader, i don't have idea what to do so please help me,is any way to flash rom without RUU?

Have you CID unlocked the phone already with USPL or HSPL? That would be the first step, and might be the problem.

i think i done,because in bootloader it says SPL 2.26.0000

yes, u can flash without RUU. rename ur rom file to ELF0IMG.nbh and put it in the root of ur sd card (formated in fat32).

so,that what i done i putted the sd card to nokia made usb connection between pc with xp and nokia transferred the rom on the sd card,unplugged nokia,token out card putted it to elfin and hold power button and it get me first to searching SD card communicate and after to bootloader and nothing happens, i leave it for couple of minutes on searching sd card communicate and nothing than happens i changed it to FAT32, the elfin is from orange uk.
PLEASE HELP ME!!!!!

NOW when i put the sd card in and keep camera and power buttons it get me to message "update sd image?" and "press power key to start download" but in this time it getting blinking and few seconds after screen go white,i am trying to press power but nothing happens appart turning screen into white PLEASE HELP ME UNBRICK MY PHONE.

P4350 stops on green windows mobile screen

Hi everybody,
I tried to free up 8MB out of 12MB of pagepool in my HTC P4350. after some months my device was hanged and I couldn't restore by hard reset. also when I tried to run the RUU via my computer by pressing camera while restarting, the boot and update process will stop on green windows mobile screen.
my ROM version is 4.17.0001
anybody can help?
thanks,
Pejman

are you hard spl? if you are then try flashing via the the sd card method.

I had upgraded my 4350 with HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe by pressing camera on startup. it goes 100% complete, then restart and after white htc screen shows green win mobile, on this section the green signal LED works and the sound of keyboard open/close plays.
just let me know what is the problem and how can I use SD update methode.
Thnx

How to fix an HD2 that Freezes at the splash screen and won't boot

HI,
I just had this problem and I saw that a ton of others had it too. It was where my phone would stop at the windows screen and not boot, and my PC wouldn't read the phone so I couldn't load a new rom or Hard SPL. How I fixed it was by getting my phone into bootloader mode, (the multi colored screen). Here's how to do it.
While phone is Off:
Hold Volume down & press power button
While phone is On
Hold Volume down & press Reset Button (meaning the little yellow button by the battery that you have to press with a pen to soft reset it)
Once your on the bootloader screen, plug your phone into your PC, you will hear the ding that the computer recognized it but your Windows Mobile desktop software will still say your not connected, don't worry about that,, you are connected. After that, just pick whatever rom you want, then just install it like normal. and it works. If your not running a rom, do the same but install hard SPL instead of a ROM.
I hope this helps,
As long as your phone turns on at least to the opening screen there is hope.
kn0t.

i had that problem, my phone was stuck on stock together splash screen, but I just called up tmo and they have sent me a new hd2.

Three words. I LOVE YOU! well not really since I'm not gay ha!
By the way This also works for the HTC Imagio!

can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?

waigstar said:
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
Click to expand...
Click to collapse
Ok first off what ROM do you have and what SPL does it show when you are in the muticolor bootloader screen? Secound if you are trying to flash a ROM yse right clicking the .exe file and selecting run as adminastrator is a good idea. l

I had the same problem.. what usually helps for me is when it gets stuck.. pull out the battery and give it a solid 15-20 minutes.. and then turn it on and do nothing up until after it has booted

i do the battery thing but i cant go on doing this , i put a little txt or phone call and the phone goes bonkers and heats up,nightmare!
ok on the tri colour screen it says
PBB110 HX-BC
SPL-S.08.0000 8G XE
MICRO(LED) 0X05
MICROP(TOUCH)
SERIAL
AH!! just got into the boatloader screen !! by pressing volume up and down together~! rest it! but i need to wait cos ive pulled the battery again!!!

I am having the same issue. I had a android rom then was finally able to flash via sd the stock rom, but it would just freeze on splash screen when trying to boot. Now when I try to flash rom again it will start and freeze on 1%. Any suggestions?

Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol

stormohio said:
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
Click to expand...
Click to collapse
Ok try going to windowsmobile.com/getstarted and download and install the latest version of ActiveSync or Windows Mobile Device Center (WMDC) , wich ever one you have to have for your computer, and install it on your computer as they have updated USB drivers for your HD2.

have you tried loading a rom from the root of your memory card LEOimg.nbh?

i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken

melodicstealer said:
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
Click to expand...
Click to collapse
You need to put your phone into bootloader then your computer will recognize it. Hold the volume down button down while you power on the phone and the multicolor bootloader will come up. Next connect your HD2 to your computer via your USB cable. Wait for the Serial in the white bar of bootloader changes to USB and then flash. If you go to the device manager of your computer while you see USB on your phone it should say HTC USB Sync if you want to be assured that you have a connection to flash with.

HTC EVO fail root power cycles

Hi I have an htc evo and I tried to root it but failed when installing the damage control rom and now my phone just power cycles when I try to boot it up. If I go into bootloader, volume down etc, when I plug it into my pc it says it could not install the driver for Qualcomm msm device and I cannot run the recovery.bat because it just opens for a second then closes. Please help me!!!!!

I GOT the Same issue
I boughtt this phone (HTC EVO) off ebay thinking I can clear DATA and start over-- I've done some researching and it looks like this was a failed FROYO update-- I Tried usring RUU utility to update rom-- and found one that is the same rom as what looks to be on the phone already, because the RUU is telling me something like replace Build 3.26.651.6 with the same thing-- 3.26.651.6-- i will click yes/next-- it will write new info onto the phone-- then it will complete and restart-- then it goes back and power cycles over and over and over again...just on repeat--(i've tried to downgrade roms, but when i do it gives me a error that reads.."Error [140]: Bootloader version error The ROM Update Utility cannot update your Android. Please get the correct ROM Update Utility and try again:---- interestingly enough there is no 4g splash screen when it cycles-- it only goes on the startup image "white HTC 4G EVO with black letters" then will turn off..then vibrate, then repeat again...over and over and over again...
PLEASE help--
I feel as though I've tried everything--
I've also attempted to put "PC36IMG.zip" on SD card with my GF's evo-- then back to mine-- because computer doesnt read my com when its pugged through usb-- i can only connect at "Bootload USB plug"
--ANY help will be greatly appreciated.....
Thanks in advance--

[Q] HTC HD2 Stuck from Booting

Hi,
I was actually trying to put ICS on my device from GingerBread Nand.I connect device with USB and I was trying to Wipe using HD2 Nand Toolkit.As device reached 100%, it suppose to restart but in my case it hanged at 100% for 30 mins .Then I restart by removing the battery.Now when 3 color screen shows, it shows serial at the bottom but it change to usb when I connect to pc .The problem is now when I try to re-partition ,it says device is not connected.
So I thought I may be able to install windows by downloading actual rom from T-Mobile and place the file to sd card by renaming it to LEOIMG.nbh.I did it using a class 2 16Gb card.As I press both volume down key and power button, it goes right to the rainbow screen.Please help me!
Thanks for reading the issue.

Are you using cLK or magldr?

Thanks for your reply.Actually i wanted to use cLK but I actually could not able to go that far.Please read the problem which might give you some clue to help me.

Waht does it say at the top of the tri-colour screen?
have a look here
http://forum.xda-developers.com/showthread.php?t=1402975
and here
http://forum.xda-developers.com/showthread.php?t=1021837
let me know if your still having problems after reading.......

Personally, I'ld just go back to win6.5
http://forum.xda-developers.com/showthread.php?t=623283
and start over again.
Works for me most of the time.