Database Users

[q] help: Very urgent!!!!

Everything was fine running ROM Magic Fusion 2.1 V5 528Mhz, unless some FC...
That why I decided to try a different ROM.
Went for this one:
Ginger yoshi 1.0 RC2 (android 2.3.2) for 32b and 32a now ^_^
Apparently this one asked for Radio Update. Think I did something wrong because the only thing I have when I turn on phone is something like this
Sapphire PVT 32A SHIP S-ON H
Hboot - 1.76.0000 (SAPP10000)
CPLD-12
RADIO - 2.22.27.08
nov 3 2009, 15:56:29
Th eonly soluiton I found by myslef was try to flash the original RUU:
RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe
But doing that it always freezes at 36% on RADIO update.
The screen completely white!
What can I do?
Someone said, in another forum, to flash a Stock ROM via fastboot usb, but I don't know how to do it!!!
And I'm afraid to do more wrong things!
I using windows Xp
Last HTC drives V 3.0.5511
Can somebody help me please! I need my phone urgently!!!
Thanks!
Sigla

Looks like you've briked your phone.. But if you can acces "Fastboot" you are saved !
First, download sdk drivers, take a look here, then root, then try Radio Switcher ... and flash CM 6.1.0 DS

32a device? shouldnt that be a 3.22 radio? not the 2708

You have a radio/spl mismatch.
You got 32B radio instead of 32A radio. Plus you got new spl together with "old radio".
Very bad.
You need to flash the 1.33.2010 spl to bring you device into a working state and from there we can fix it.
The problem is you got S-ON which is bad for your situation. But i will try to flash the spl anyway and see if i succeed.
If not, then does custom recovery work?

Thank you mumilover but I'm a newbiw in this (you can ask how a newbie done this mess!! Well, I did it)
I just don't have any idea how to flash 1.33.2010 spl... on the screen, fastboot don't come up, only RUU USB (in yellow)....
I can access only via adb fastboot (windows)....
Any hint you or someone can give me?
Many thanks and sorry the bad english!
Sigla

Download my fastboot commander tool (check my signature - magic version)
Chose to flash the spl/hboot -> navigate to "imgfiles" folder which is bundled with the tool -> chose the 1.33.2010 spl (tagged oldspl)->flash it.
If it goes well then post here and we can fix the rest.
If NOT, then you are kinda fu*ked.

Didint' tested yet, just because I notice you say it's only for S:Off
Mine it's
Sapphire PVT 32A SHIP S-ON H
Shall I do it in the same?
Many thanks!
Sigla

No sir, it didn't worked
Anyway, thanks agian for your help!
Any suggestion?
Best regards,
Sigla

Wrongly flashed 32A SPL on 32B - any chance to recover?

Well, I accidentally flash a 32A SPL on my 32B myTouch.
Good thing (may be) is I still can access to fastboot.
Bad thing is it turned to S-ON & I can't boot to recovery.
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP30000)
CPLD-10
RADIO-6.35.16.19
I searched most of related topics in xda but could not find any clear solution yet.
Please help me what to do to recover my beloved Sapphire.

then use eyegors tool to flash
http://forum.xda-developers.com/showthread.php?t=794450

camapghe said:
Well, I accidentally flash a 32A SPL on my 32B myTouch.
Good thing (may be) is I still can access to fastboot.
Bad thing is it turned to S-ON & I can't boot to recovery.
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP30000)
CPLD-10
RADIO-6.35.16.19
I searched most of related topics in xda but could not find any clear solution yet.
Please help me what to do to recover my beloved Sapphire.
Click to expand...
Click to collapse
If you can fastboot, you need to flash a 1.76... SPL to go with your 6.35 radio like 1.76.2007.
fastboot flash hboot hboot-1.76.2007.img

Might be due to S-ON, it won't allow me to write any SPL, radio or recovery img. When I used the Radio Switcher, it said failure. When I used adb, it said "signature verify fail".
I even tried to use SAPPIMG.nhb but it stucked at radio update.
The last hope there is I still can access to the holy fastboot.
Please help me, guys.

camapghe said:
Might be due to S-ON, it won't allow me to write any SPL, radio or recovery img. When I used the Radio Switcher, it said failure. When I used adb, it said "signature verify fail".
I even tried to use SAPPIMG.nhb but it stucked at radio update.
The last hope there is I still can access to the holy fastboot.
Please help me, guys.
Click to expand...
Click to collapse
From fastboot try fastboot boot recovery newrecoveryname.img
Then from there restore backup or backup then reflash spl
Sent from my Gingerbread on Sapphire using XDA App

ADB said booting ok, but stuck at MyTouch3G screen. Any solution guys?

Wrong section!
Do NOT post in Development unless you have developed something!

camapghe said:
ADB said booting ok, but stuck at MyTouch3G screen. Any solution guys?
Click to expand...
Click to collapse
Checkout the stickies
Sent from my Gingerbread on Sapphire using XDA App

camapghe said:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP30000)
CPLD-10
RADIO-6.35.16.19
Click to expand...
Click to collapse
1)See the radio version... thats for the 32A devices... big no-no
2)see the spl... there is a mismatch between the spl and radio... second big no-no.
3) see the 32A... it should be 32B.. third big no-no
The only way you can flash anything is by flashing a matching spl, so the radio and spl can work together.. from there you flash a different combo to match the device you have. The problem is you have s-on, the forth no-no, which complicates thing further...
In other words, you are in deep sh't :0|
You are not completely bricked... but you are very close to...
The fix:
It's a very dangerous approach... post here if you are willing to take a major risk :0)

Thanks mumilover.
I do know that I'm in deep deep Sh!T.
Please post your solution, as I consider my phone in dead anyway now. Can take any risk for testing purpose

Start with these commands:
Code:
fastboot getvar version-main
fastboot oem h
Post back the results

Hey,
as described here I've got the same problem as camapghe. I'm very intrested in hearing this dangerous approach. So please tell us.
Here is the requested output from my device:
Code:
-bash-4.1$ fastboot getvar version-main
version-main: 1.89.162.1
-bash-4.1$ fastboot oem h
... INFOcommand list
INFOkeytest
INFOheap
INFOboot
INFOreset
INFOpowerdown
INFOrebootRUU
INFOtask
INFOrtask
OKAY
-bash-4.1$

The thing is, i got my magic stolen... so it's very hard for me to tell you all the steps from memory... so.. i just pm'ed you my email so we can do it together over gtalk :0)

Code:
fastboot getvar version-main
version-main: 1.88.531.1
fastboot oem h
...
(bootloader) command list
(bootloader) keytest
(bootloader) heap
(bootloader) boot
(bootloader) reset
(bootloader) powerdown
(bootloader) rebootRUU
(bootloader) task
(bootloader) rtask
Then, what should I do now?
@ mumilover: I sent you my gmail contact

Guys, I think the danger approach original guide is
HERE
@mumilover: please have a look at this link & confirm what should us (me & Crazy_Scientist) should do next. I'm dare NOT to try any more without guidance from professional.
Update 1:
I just tried a bit & confirmed that I CAN boot in rebootRUU. Waiting for mumilover's guide.
Update 2:
Now stuck in RUU mode. Feel like I'm r*ping my phone's corpse. Ha ha ha.

The guide you referring to has a set of well known commands, like the sd-card enabler and flash of misc partition.
But it does not help us in your case.
What i want to do is something else... i want to flash a RUU using a goldcard.. but while the device is flashing we take out the battery in the right moment... this way we force to flash the only spl... this way we gain a matching combo, and then try to forcefully boot the device... it will not succeed to boot all the way, but i will give us some time to try a different approach :0)
PS: i got your pm, but the time difference makes it a little hard to communicate :0|

So, that will be the idea. I think I know what to do.
But I don't have any RUU img with good SPL yet. If you know any, please provide me the link. Thanks.
Besides, from the command in fastboot, I found that I always stuck at radio point 97 when updating radio. The rest will be ok.
What I want to ask is there any sappimg that can update without / bypassing radio update?

camapghe said:
So, that will be the idea. I think I know what to do.
But I don't have any RUU img with good SPL yet. If you know any, please provide me the link. Thanks.
Besides, from the command in fastboot, I found that I always stuck at radio point 97 when updating radio. The rest will be ok.
What I want to ask is there any sappimg that can update without / bypassing radio update?
Click to expand...
Click to collapse
Not a sappimg, the second part of the sappimg flash process is going to be the radio. AFAIK, there is no way to bypass this.

And Crazy_Scientist is back to life running CM and enjoying his non-brick :0)
It took 3 hours to get him back to a running system, and 7.5 min to root and flash custom rom hihihihi

camapghe please post here so i can see you still active or not... no logic in writing the solution if the OP is absent :0)
And just as a side-note, every sappimg.(nbh|zip) has it's own flash order... so the trick is to flash a sappimg which flashes the spl before the radio... and stop it before it updates the version-main nr, so we can flash a different sappimg just after it without the need to change the misc partition.

Please help!!!!i thing it is bricked

Hello
I tried to flash an original RUU to my sapphire 32A with 2010 hboot and 3.22 radio....I received an error while updating the radio..Now when i turn on the phone it shows me the Fastboot mode with 2009 hboot and 3.22 radio and cannot flash again..When it goes to radio the screen becames black
Please help!!!!

More info
in fastboot mode i can see
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Nov 3 2009,15:56:29
What to do??the phone closes when the official ruu tries to update the Radio
How can i restore the old?

boot into recovery doesn't work?

no only the fastboot!nothing else

Please help mee!!!!

nikosdd said:
More info
in fastboot mode i can see
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Nov 3 2009,15:56:29
What to do??the phone closes when the official ruu tries to update the Radio
How can i restore the old?
Click to expand...
Click to collapse
You have mismatching radio/spl combo.
Download my fastboot commander from my signature and provide here all device info.

............................................................
Operating system: Windows.
Tools folder found.
Windows fastboot tools found.
The folder containing the IMG files was not found.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
SPL/hboot version: 1.76.0009.
Radio version: 3.22.20.17.
Main software version: 3.05.401.3.
cid: htc__n34.
cpld: 12.
product: sapphire.
mid: sapp10000.
security: on.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
This device does not have s-off nor eng hboot.
ARE YOU SURE THAT THIS IS THE RIGHT TOOL FOR YOU?.

is the phone bricked????

Yes and No... it's very hard to bring it back...

please tell me the way...!

i tryed something and now i got this
HBOOT-1.76.0008 and from fastbootcommander the same as previous...Is now easier or i made a ........???

Please help mee~!!!>.......

The problem is you have mismatching spl/radio versions.
We need to fix that by changing the spl version to a 3.22 radio compatible one. The spl should be 1.33.xxxx.
But also here we have a problem. Your system version is high. We cannot find any RUU which has the same or higher version than what you already have, and contains an old spl version (the 1.33.xxxx version).
What we can do is to change the system version. That requires access to the system or recovery. You don't have access to both... so again... no luck.
You have 3 options:
1) Jtag it (hard to find anyone to do it for you, and very complicated to do it yourself)
2) XTC clip (very expansive, better buy a new phone)
3) Try to run this command: fastboot oem boot
and see if the device boots into the system. If it does, KEEP IT A LIVE AND POST HERE FOR HELP.

mumilover said:
The problem is you have mismatching spl/radio versions.
We need to fix that by changing the spl version to a 3.22 radio compatible one. The spl should be 1.33.xxxx.
But also here we have a problem. Your system version is high. We cannot find any RUU which has the same or higher version than what you already have, and contains an old spl version (the 1.33.xxxx version).
What we can do is to change the system version. That requires access to the system or recovery. You don't have access to both... so again... no luck.
You have 3 options:
1) Jtag it (hard to find anyone to do it for you, and very complicated to do it yourself)
2) XTC clip (very expansive, better buy a new phone)
3) Try to run this command: fastboot oem boot
and see if the device boots into the system. If it does, KEEP IT A LIVE AND POST HERE FOR HELP.
Click to expand...
Click to collapse
XTC clip got its price reduced by 83 % on their wesite (from 310 to 54 usd)

Yea... but is the phone worth it?
A new phone will cost you the same or a little bit more...

sir what about my case
sapphire unknown 32a ship s-on g
hboot- is for 32b(sapp10000)
2.22etc. also for 32b
after i flash sappimg.nbh, it became like that and i cant access recovery mode, bootloader only , but i cant change the spl and i cant put recovery.img. it says remote:now allow

The answer is found in your thread..

no it remains at the Fastboot mode.It vibrates and cmd stucks at INFO0 and after 2 minutes the phone does a soft reset showing the HTC logo and after 2 minutes again and again...XTC clip is 30 eyros and at ebay more cheaper..Are you sure that this will fix it?.Also if i try to flash a rogers rom with goldcard that has higher version than the current???But i heard about a risk that if it works you are ok but if not i will make the things worse...is that true?

And has HBOOTPREUPDATE = 12 (i thing is about hboot) and i created a goldcard Sandisk 2gb with SimpleGoldCard_v1.I took the CID of the memory stick from my other mobile HTC Desire

As long as you have mismatching spl/radio you will get failing radio flash.

problem into radio

I can't make any action because I update radio to 6.35.10.18 , and i can't open bootloader please i need downgrade readio by command within connect USB
my mobile
SPL/hboot version: 1.33.0008.
Radio version: 6.35.10.18.
Main software version: 2.15.901.4.
cid: tim__401.
cpld: 12.
product: sapphire.
mid: sapp10000.
security: on.
build-mode: ship.
I need downgrade Radio

Can you load into these modes?
Turn phone off. Press and hold Back + Power (to start into fastboot)
Turn phone off. Press and hold VolumeDown + Power (to start into hboot)
From fastboot-mode write here first 5 rows. It's important.

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.88 (SAPP10000)
CPLD-12
RADIO-6.35.10.18
Apr 29 2009,02:28:53

As you have Magic 32A you can use this solution
http://forum.xda-developers.com/showpost.php?p=5526163&postcount=1
Goldcard is important. When RUU is installing it checks CIDs from ROM with CID from phone. If they are different - RUU will print error. Goldcard gives superCID and you able to install other official ROMs
After solution you will get new combination hboot 1.76.2007 S-OFF / radio 6.35.XX.XX (X - any number)
With Hboot 1.76.2007 S-OFF you can revert back to hboot 1.33.2010 S-OFF / radio 3.22.XX.XX via FastbootCommander
But you can stay at new combination and use any custom ROMs with tags [32A][6.35] or [32A][NewRadio]

my Android phone always boots in the RUU failed mode and cannot enter the Android Home screen anymore
kindly check attachment
I cant install Terminal Emulator
how can get code and make Goldcard

M.Mohamed2007 said:
my Android phone always boots in the RUU failed mode and cannot enter the Android Home screen anymore
kindly check attachment
I cant install Terminal Emulator
how can get code and make Goldcard
Click to expand...
Click to collapse
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
Search another Android-phone and make goldcard on it.
Or you can use computer with linux/ubuntu
After making goldcard you can continue flash-process by running RUU from my previous post

Dear
i tried by ubuntu-11.10-desktop-i386 but i can't reach . what i can do?

M.Mohamed2007 said:
Dear
i tried by ubuntu-11.10-desktop-i386 but i can't reach . what i can do?
Click to expand...
Click to collapse
What can't you reach?
In ubuntu try to go to mmc_host
Code:
cd /sys/class/mmc_host
then explore directory
Code:
ls
You should see files like mmcX (where X - any number)
Then you can read CID by command
Code:
cat /sys/class/mmc_host/mmcX/mmcX:*/cid
(where X - any number)

can't you reach? = I can not arrive
i will try and feedback
Happy Eid

Mytouch 1.2 32A SPL issue

I have a 32A mytouch 1.2 and i accidently flashed 1.76.0008 and the new radio. now i can really do anything cant revert back nor can it flash anything in HBOOT i either get main version is old (i think, says main version is...) i tried gold carding it doesn't work still get the same message redid my goldcard and still nothing. any way to revive my phone without jtah sincei can still access flashboot and what not.
SPL/hboot version: 1.76.0008.
Radio version: 6.35.08.29.
Main software version: 2.53.707.2.
cid: t-mob010.
cpld: 13.
product: sapphire.
mid: sapp31000.
security: on.
build-mode: ship.