Database Users

GT540 doesn't boot

Helo,
I've got a big proplem, my GT540 doesn't boot anymore it always freezes when the LG sign appears. I have this proplem since I'd tried to change the statusbar font into whiteby changing the services.jar. Hardreset and KDZ Updater aren't working. And I also tried to change the new services.jar to the old with adb but I don't get root permissions.
My phone runs with 2.1 Eclair.
Thanks for your help,
Lucas

Wait, arent the status bar white by defoult ?

No i don't mean the bar I mean the clock, but do you have any ideas to solve my proplem?

Do The Hard Reset With Press The
Vol Up + Search Key (on the right side of the phome) + home button

When I Trie to do the hardreset it Happens nothing! Is there no other possibillity to reset?

You could try fresh install with KDZ updater, that worked for me when I broked the radio and my network didn't worked. If you have troubles geting in to download mode you could try removing the battery and press volume up + camera + power button Just be carefull! Good luck
Sent from my GT540 using XDA App

I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log

Luc-As said:
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
Click to expand...
Click to collapse
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
You could also disable your anti virus and use only the back USB ports of your PC. Good luck !

Oh THANKS! I love you guy, I thought I killed my brand new mobile!

Luc-As said:
Oh THANKS! I love you guy, I thought I killed my brand new mobile!
Click to expand...
Click to collapse
You are welcomed

hi all!
my phone was root, instant a2sd, then it work very slow, i was factory reset, it worked.
but when i reset it again, and it can not log on. stop at "android" screen log on. In " download mode" ,i update rom again (v20B_00 and CIS V20B_00), some time, done, but not change, it can not log on. stand by at "android" screen.
any body help me? what can i do? any way to factory reset by window? script? els..
ps: it not hard reset, "Volume up + HOME + SEARCH" buttons not work, maybe my phone GT made by LG vietnamese.
IMEI :352***-04-31***3-1
tks for read!

GT540 does not boot
I have followed
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
BUT I get error:
Upgrade error
Wparam:100
lparam: 4008

try booting and then when it is stuck at the lg logo plug it in to your pc and begin the upgrade in diag mode.
It worked for me when i wiped my phone.

Cant get it to start reloading the firmware
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..

The upgrade does not start...
Very GOOD now it did it like this.
Start your phone in recovery. Volume down+camera+power, see if the pc sees the device. Start the update tool max it and select emergency and flash again.
This fixed...
Now I need to add spanish to it. Do you know how??

cmora22 said:
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..
Click to expand...
Click to collapse
Download this file http://forum.xda-developers.com/showthread.php?t=812308
and in folder u see the "updater" file. doubleclick and u have the english KDZ version.

Oh. I need this Fail.rar too.
I have the same Problem. Can anybody reupload?
THX

The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone

tehbone said:
The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone
Click to expand...
Click to collapse
yeah, i've got the same problem, i don't know what i can do...
Pleaz help us =(
My PC don't see my phone, my phone stay on 'lg' boot, and can't boot on emergency or hard reset... =/
EDIT: i did it!
You only need to desactivate the LG Android USB Modem (i didn't saw 'Modem' on Device Manager, so i could not desactivate it).
If like me you don't see Modem, you will see it during the period of time during which the device is recognized mod download, ie for about 5 seconds after you plugged in...
I hope it will help someone
PS: Sorry for my english..

Look under modem and you see your phone
At property under tab look your com number remember it
Take teraterm create a connection with your phone you can connect it normally
When you are connected write
AT
( if you see nothing go to setting general and activate ''echo typed only'' )
If your getting OK
AT%FRST%
and the phone does a factory reset
( i'm french so i'm sorry for my english )
Sent from my GT540 using XDA App

[Q] Flash Tool says: "Searching for Xperia..."

I have Xperia X8 with Eclair update. When I try to flash with X10 Flash Tool it always says Searching for Xperia... Yes I connected the phone in flash mode by holding back button and conecting with usb, I have usb drivers. Non-gui version says the same. I have tried to flash 1.6 firmware from "Going back to 1.6" thread. Please help me, fast!

please post question at general section

Flash Tool help
Try connecting the phone in flash mode, when the flash tool displays "Searching for Xperia ......"

Solved!
Solved! I just installed some drivers from some site. Yes i know i was telling that i have drivers, just i did not know i have incorrect drivers.
Now i am back to Android 1.6!
Can somebody sugest me way to root my Xperia X8?

Now, follow the Step by Step TUT.
Step by Step TUT

Now Rooted 2.1. Thanks for help.

Next time it should help: http://forum.xda-developers.com/showpost.php?p=9510216&postcount=16

How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.

SaNTi285 said:
How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.
Click to expand...
Click to collapse
Download automatic install from this link http://www.akshayy.com/sonyericsson/wp-content/uploads/SE_USB_Driver_installer.zip
Press the thanks button!

I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.

Full instructions.
SaNTi285 said:
I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.
Click to expand...
Click to collapse
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!

Still not succeeded with flashing.....
velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)

Explain for Noobs!
thomaszq said:
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)
Click to expand...
Click to collapse
Yellow trinagle is located in device manager!(just look at other thread)
You can get non-gui version in Bin4ry thread "X10 Flash Tool...and so on"
You need to open x10flash.bat in non-gui folder.(not gui)

velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
Im still stuck on step 1. The yellow mark still wont disappear no matter what I have tried to reinstall/update the driver.
I have let the wizard to search the internet for correct driver, and I have point it to specific folder with the driver in it, I have tried several versions of the driver that I can find on the net.
I keep getting "the hardware was not installed because the wizard cannot find the necessary software" error.
I can use Flash Tool GUI to root my X8 and to install XRecovery. Those were done successfully. And we are talking same session same day here. Just straight after I rooted the phone and installed Xrecovery, did a backup, then I wanted to flash to 2.1 but then this happened.
Only when the phone is connected to the PC in flash mode.
Can anyone help point me in the right direction?
Forgot to mention: the driver I'm talking about is SEMC signed driver. That is the driver for flashing right? Or have I totally missed this point all together?

I got it working now. It was not SEMC driver that's needed. It should be the gordon's gate driver. For some reason that driver went missing. I have installed SEUS and managed to flash my phone yesterday using SEUS. So definitely it was installed, but disappeared today or sometime after I used SEUS last.

[q] nodo update fix from microsoft

Anybody try this ????? :
Try using the Windows Phone Support Tool. The Windows Phone Support Tool is an application that fixes problems that prevent your Windows Phone 7 from updating successfully. The tool only works for the two error codes listed in the Symptoms section.
Unplug the USB cable from the phone.
Download the Windows Phone Support Tool from the Microsoft Download Center. If you have a 32-bit system, download the WPSupportTool-x86.msi (http://download.microsoft.com/downl...-4E4A-8179-9A3C5483E366/WPSupportTool-x86.msi) package. If you have a 64-bit system, download the WPSupportTool-amd64.msi (http://download.microsoft.com/downl...E4A-8179-9A3C5483E366/WPSupportTool-amd64.msi) package.
Note If you're not sure whether you have a 32-bit or 64-bit system, read the following Microsoft Knowledge Base article:
827218 (http://support.microsoft.com/kb/827218/ ) How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system.
Complete the steps to install the WPSupportTool package.
When you're finished, click Start, point to All Programs, and then from the list of programs, click Windows Phone Support Tool.
On your phone, press and hold the Power Collapse this imageExpand this imagebutton for 5 seconds until the message Goodbye! appears.
Press the Power Collapse this imageExpand this imagebutton again to turn the phone back on. As soon as the phone turns on and vibrates, press and hold the Camera Collapse this imageExpand this imagebutton until the "Connect to PC" screen appears. It may take a few moments for this to appear. As soon as the screen appears, you may release the Camera Collapse this imageExpand this imagebutton. Note The camera button is located on the side of your phone.
Collapse this imageExpand this image
Reconnect your phone by using the USB cable.
Your phone will be detected by your computer and the Zune software may automatically start. This process frequently takes several minutes.
Important If the Zune software does start, close it.
In the Windows Phone Support Tool, click the Recover button.
Collapse this imageExpand this image
The Windows Phone Support Tool will install an update that fixes the problem and restart your phone. If you phone is locked, enter your password when prompted.
When you see "The device has been updated" text, located at the bottom of the screen, close the Windows Phone Support Tool and disconnect your phone.
Collapse this imageExpand this image
Reconnect your phone to the computer to install the latest phone update by using the Zune software. (To update your phone's software, click Settings, click phone, and then click update.)

galati said:
Anybody try this ????? :
Try using the Windows Phone Support Tool. The Windows Phone Support Tool is an application that fixes problems that prevent your Windows Phone 7 from updating successfully. The tool only works for the two error codes listed in the Symptoms section.
Unplug the USB cable from the phone.
Download the Windows Phone Support Tool from the Microsoft Download Center. If you have a 32-bit system, download the WPSupportTool-x86.msi (http://download.microsoft.com/downl...-4E4A-8179-9A3C5483E366/WPSupportTool-x86.msi) package. If you have a 64-bit system, download the WPSupportTool-amd64.msi (http://download.microsoft.com/downl...E4A-8179-9A3C5483E366/WPSupportTool-amd64.msi) package.
Note If you're not sure whether you have a 32-bit or 64-bit system, read the following Microsoft Knowledge Base article:
827218 (http://support.microsoft.com/kb/827218/ ) How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system.
Complete the steps to install the WPSupportTool package.
When you're finished, click Start, point to All Programs, and then from the list of programs, click Windows Phone Support Tool.
On your phone, press and hold the Power Collapse this imageExpand this imagebutton for 5 seconds until the message Goodbye! appears.
Press the Power Collapse this imageExpand this imagebutton again to turn the phone back on. As soon as the phone turns on and vibrates, press and hold the Camera Collapse this imageExpand this imagebutton until the "Connect to PC" screen appears. It may take a few moments for this to appear. As soon as the screen appears, you may release the Camera Collapse this imageExpand this imagebutton. Note The camera button is located on the side of your phone.
Collapse this imageExpand this image
Reconnect your phone by using the USB cable.
Your phone will be detected by your computer and the Zune software may automatically start. This process frequently takes several minutes.
Important If the Zune software does start, close it.
In the Windows Phone Support Tool, click the Recover button.
Collapse this imageExpand this image
The Windows Phone Support Tool will install an update that fixes the problem and restart your phone. If you phone is locked, enter your password when prompted.
When you see "The device has been updated" text, located at the bottom of the screen, close the Windows Phone Support Tool and disconnect your phone.
Collapse this imageExpand this image
Reconnect your phone to the computer to install the latest phone update by using the Zune software. (To update your phone's software, click Settings, click phone, and then click update.)
Click to expand...
Click to collapse
This is the wrong place Sir

i tried this just yesterday, and it didn't work. Instead of pressing the camera button i used zune update to restart the phone and get to the "connect to PC" screen. the tool just wouldn't see it.
i think the main problem is with the drivers. if you check the device manager you will see the phone is identified as Leo, under portable devices, while at the "connect to PC" Screen.

No it doesn't work when you press recover you get the follow
The phone is not in the 'Connect to PC' state. Please, make sure that you follow the instructions and your phone shows the 'Connect To PC' image.

Whats with the "Collapse this imageExpand this image" everywhere?

Starfury said:
Whats with the "Collapse this imageExpand this image" everywhere?
Click to expand...
Click to collapse
That's called " I copy-pasted everything without editing"

hi i got this link may be it works
http://blog.walshie.me/2011/04/04/so-who-wants-windows-phone-updates-like-right-now/
i dint try but looks relaible

chiragpatwa said:
hi i got this link may be it works
http://blog.walshie.me/2011/04/04/so-who-wants-windows-phone-updates-like-right-now/
i dint try but looks relaible
Click to expand...
Click to collapse
I just tried this. It runs without problems and says it has updated the phone but the phone still says 7004....

It doesn't work, though the updater doesn't deliver an error message. I'm wondering if there is a possibility to modify this tool in order to handle the updating process...!?!

i try the both with all the method possible but no luck.

lestatneo said:
i tried this just yesterday, and it didn't work. Instead of pressing the camera button i used zune update to restart the phone and get to the "connect to PC" screen. the tool just wouldn't see it.
i think the main problem is with the drivers. if you check the device manager you will see the phone is , under portable devices, while at the "connect to PC" Screen.
Click to expand...
Click to collapse
Hi m8....
I did try this method to..no luck ... i do beleive that is the second boot that when the device
is identified as Leo where the problem is...
Is there a way to to change that, and install the driver for hd7 insteed...?
I think that this tool is very importand for Leo users and it will lets us update the phone.
Maybe a developer can help on this ???
colossus

anyone got a copy of ChevronWP7.Updater

michaels0007 said:
anyone got a copy of ChevronWP7.Updater
Click to expand...
Click to collapse
Here you go m8

Mine is still on 7.0.7004.0.
Did somebody with 7008 on a HD2 try to go to NoDo with the New Chevron tool?

Updated Successfully with Chevron but still showing 7008 no copy paste but system is running much smoother....

PedrooNL said:
Mine is still on 7.0.7004.0.
Did somebody with 7008 on a HD2 try to go to NoDo with the New Chevron tool?
Click to expand...
Click to collapse
I suspect it doesn't run any better than the update from 7004 .

Seems like Microsoft advise to wp7 users, dont use the chev updater , because cant use the future update.

colossus_r said:
Here you go m8
Click to expand...
Click to collapse
I tried the chevron updater method, and it updated me succesfully, but when my phone rebooted, it showed me a picture that told me to connect it to the PC. I did, and zune said there was an error with the device, in summary, it was bricked. Of course, MAGLDR prevents brick, because i could just flash wp7 again, but just don't try this.
And i think it killed my SDCARD D:
Nothing reads it/finds it. this is so weird. :'(

You are too fast men ,haha, you most be little slowly with your phone. The picture you have seen its normal and you only have to do is do not unplug your phone of the computer , and if you do it nothing hapend , is no necesarry to reflash your phone , just remove the battery and restart your phone. Always its inutile to try it becvause at the moment no funcion the update in HD2.Regards !!

anyone got a copy of ChevronWP7.Updater x64

Meizu m2 note bricked.

I have meizu m2 note. Its now bricked. I was using sp flash tool to unlock the bootloader and install twrp recovery.
i was following the guide giving on youtube. I can't attach an outside link here.
So i did everything this guide said, but on the last step when i switched off my phone and connected to the usb port. The sp flash tool stopped working i waited for 5-10 mins. Finally it crashed. Now when i try to connect my phone it says usb device not recognised (the last device you connected to this computer malfunctioned). I cannot start my phone. I tried pressing the power button for 10 secs, tried pressing volume + with power button, nothing happens.
Anybody have any idea how to solve this.

Go to download old version Flyme os 4+ any but original rom you have must install,
And dow load any latest sp tool,
And also downlaod latest all mtk devices drivers,
If you have system knoledge you can install all of these pc softwares,
Test it once again your phone connecting to computer,
Just detected only nothing. Can do that its just detected your will be alive soon but its very easy if you know a little bit mobile knowledge,
Lets go to process
Step 1 check best and good branded usb connecting cable, test to connect usb cable to your phone,
Step 2 extract Flyme stock rom, and extract mtk sp tool,
Step 3 open sp tool showing error there is no any scatter. Or download file dont worry, da file availble at sptools folder you can go and select, and scatter. File availble at flyme stock rom folder lets check it then select firmware all formate and install that you have to select that option, then you select download and now connect your phone just leave ituntill done then your phone is will alive feel happy like me if you need any more information any other problem connect. To. Me

Can you speak more clearly?I don't understand.Because my English is not very good.

zzx3731 said:
Can you speak more clearly?I don't understand.Because my English is not very good.
Click to expand...
Click to collapse
What problem with your phone?

Hi ! I have the same problem right now, when I plug it, it says device not recognised, what could I do now ?

Thank you very much，This is my mobile phone. It's done.Thank you for your kindness.
：○
Hagadou said:
What problem with your phone?
Click to expand...
Click to collapse

I been able to install LineageOS, I fixed it by pressing home and menu button, it disconnect and reconnect and i been able to Re-flash it with the recovery and when i tried to install Lineage, my error was gone (error 7)

Lenovo Vibe K4 Note Can't Flash File Sp Flash Tool

Hi I'm new for this forum II have a lenovo vibe k4 note that will be bricked during upgrade session...I'm already used RR version 5.8.5. when I tried to next update my phone stuck up at and not finish to flash but I'm waiting to long,then my phone has reach a battery low and will it be turn off.I'm try to open but stuck at logo LENOVO.to solved I'm flash a firmware s232 using sp flash tool but I'm worst I have no luck when my phone connect to USB its automatically open up and vibrate when I pressed DOWNLOAD button in sp flash tool.Please help me how to re flash or downgrage my phone when its come like this
PS. Sorry my bad english

Press Download button fist, then connect your phone after. Charging your phone to full, then try again. Maybe you should to change the usb port or download the other rom (I downloaded from firmwarefile.com)

chuate92 said:
Press Download button fist, then connect your phone after. Charging your phone to full, then try again. Maybe you should to change the usb port or download the other rom (I downloaded from firmwarefile.com)
Click to expand...
Click to collapse
Thank you for your time sir but I have no luck when I pressed Download button then connect USB phone to computer its vibrate and screen open lenovo logo display that's why sp flash tool didn't work

jblonz said:
Thank you for your time sir but I have no luck when I pressed Download button then connect USB phone to computer its vibrate and screen open lenovo logo display that's why sp flash tool didn't work
Click to expand...
Click to collapse
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".

Replace Cable for Mobile not Other Cable
chuate92 said:
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".
Click to expand...
Click to collapse
Maybe cable didn't work caused cable be used is for jbl.

First install Mediatek USB Drivers and then click on download button and after that connect your phone. And that should help you.

Assuming that your pc has already been installed with mediatek usb drivers,you have to click download first and then connect usb to mobile(must be in shutdown mode) by holding both volume buttons,then after at max 2 min downloading will be done. This process has worked fine with me...hope it helps...

chuate92 said:
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".
Click to expand...
Click to collapse
I had choose with battery option , latest lenovo usb driver installed then after pressing download and then connecting my phone it does Nothing it shows logo and starts charging in power off mode please do something???????
Waiting for your reply

Did u get it to work

How about now ? Have you found a solution to your problem? I also need the same solution because I can't flash with the error that always appears s_ft_enable_dram_failed.