I've flashed a bunch of WinMo custom ROM's, but this is my first time attempting to install a NAND build. I received my phone back from warranty repairs last week so I'm currently running a stock 3.14 ROM. I've got a stock 1.66 ROM that I'm planning on installing from the SD card to get a SPL that is compatible with HSPL. I want to run a Task29 before I install a NAND Android ROM (MJD's latest build, I'm thinking), but I'm not entirely sure how I should go about this.
This is as far as I've gotten as far as the install procedure goes:
1. Flash the 1.66 ROM through SD card
2. Install HSPL
3. ???
As I said, I want to Task 29 the phone before I install 'droid to make sure everything runs smootly. Can anyone list out the rest of the steps I need to do to and what's the best app to Task29 the phone for me?
Flash a radio 2.08 or above. e.g 2.15.50.14
Only flash 2.xx.50.xx radios btw, if you have a EU hd2. For T-Mo HD2, i'm not sure on the requirements sorry.
Either way, search it up, snoop around the forum, look at stickies, you'll prolly find a guide or something that tells you the radio requirement for T-MO devices.
Then flash MAGLDR, it's done by flashing a regular rom through usb.
Then download your NAND build of choice, and install. Remember to install as an administrator.
Plz read this great guide http://forum.xda-developers.com/showthread.php?t=893948
I don't need to have a WinMo ROM present when I install MAGLDR on the phone, right? I'll be able to install it from the boot loader as long as I have a compatible radio on the phone, correct?
So right now the install goes like this, someone correct me if I'm wrong
1. Flash the 1.66 ROM through SD card
2. Install HSPL
3. Task 29/Install .50 radio
4. Install MAGLDR via boot loader
5. Install a NAND Android ROM via MAGLDR
6. Profit!
novaci said:
I don't need to have a WinMo ROM present when I install MAGLDR on the phone, right? I'll be able to install it from the boot loader as long as I have a compatible radio on the phone, correct?
So right now the install goes like this, someone correct me if I'm wrong
1. Flash the 1.66 ROM through SD card
2. Install HSPL
3. Task 29/Install .50 radio
4. Install MAGLDR via boot loader
5. Install a NAND Android ROM via MAGLDR
6. Profit!
Click to expand...
Click to collapse
Yes, that's correct.
There's a link above, but I found this guide to be very detailed...
http://forum.xda-developers.com/showthread.php?p=11097380
If you have any problems at all, that will help you.
Good luck mate
Related
After flashing this rom : [Rom][WM6.5][27 Aug'09]New Elfin ROM With Latest build 23034 Xip/Sys
The device stay in the 'smart mobility' screen,
I can't even boot it up first time
I can't turn it on so how can flash back other rom?
Can someone tell me what can I do?
Please Help me. thank you
You can use this Unbricker ROM ---> http://forum.xda-developers.com/showthread.php?p=2913636#post2913636. It's the easyest way, without using other WM devices. It worked for me.
You can also use the Elf/Elfin Unbricker (Gold Card) ----> http://forum.xda-developers.com/showthread.php?t=437996. Hadn't tried this one though.
Hope that I helped.
------------------------------------------------------------------------------------------------
A user of this forum, 911sniper, provided us with an HTC test-only ROM:
http://forum.xda-developers.com/show...&postcount=735
Alternate download link:
http://www.neufgiga.com/n/50-17/shar...492127a54134b/
Alternate download link:
http://www.4shared.com/file/82315205/ea440324/RUU.html
IMPORTANT: Read the steps below before flashing!!!!
------------------------------------------------------------------------------------------------
This is a ROM that can potentially overwrite and/or unbrick a device with an original (non-patched) SPL. It has a wildcard for Model ID (ELF0*****) and CID (11111111).
I don't have a bricked Elf but I tested it with an original CID-locked SPL and it overwrote it and flashed a new generic HTC ROM with the following:
IPL 2.11.1002
SPL 2.11.1000 MFG
ROM version: 2.11.0. WWE
ROM date: 08/14/07
Radio: 02.98.90
CE OS 5.2.1620 (Build 18125.0.4.2)
Here are the steps to make it work:
Quote:
Download this ROM from the link above
Two ways to flash:
Rename the file to ELF0IMG.nbh if you want to flash from SD card (you must format the card to FAT32 first)
Put the ROM in a RUU folder that contains the RomUpdateUtility.exe. You must remove any other .NBH files in that folder first.
Start your bricked Elf in bootloader mode (hold down camera button and reset). If you are using the SD card, it should flash right away.
NOTE: If the device flashed successfully but is now stuck at the new boot screen, you are still ok. Now you can flash ANY shipped ROM at the bootloader (if you have an Elfin, flash only an Elfin shipped ROM) and your device will be running again. If you can't flash a shipped ROM after successfully flashing the Unbricker ROM, then make a Gold Card and follow the steps in that thread.
NOTE: If the Unbricker ROM doesn't work then make a Gold Card and use it again on that card.
NOTE:
One thing I noticed is that you cannot use the white screen method (elf-uspl.exe) after you flash this ROM. If you try that, then the message "Not in use" pops up under the penguin. However, you can flash ANY shipped ROM from bootloader after this unbricker ROM has been flashed. From there, you can do white screen method and then flash the Hard-SPL/USPL/cooked ROM.
Hello,
I am following these instructions: quazen.com/shopping/consumer-...d-on-hd2-nand/[/url]
They have told me to download this rom: hotfile.com/dl/107403482/000fc93/full_rafdroid_hd_ext_3r2.zip.html
Now that I am on step 4 I am supposed to run setup.exe from the rom, but it doesn't have any setup.exe file in it, only 3 folders titled (boot, META-INF, system). I am on MAGLDR right now in USB flasher mode and dont know what to do. Please help me. Thanks
RyanRan said:
Hello,
I am following these instructions: quazen.com/shopping/consumer-...d-on-hd2-nand/[/url]
They have told me to download this rom: hotfile.com/dl/107403482/000fc93/full_rafdroid_hd_ext_3r2.zip.html
Now that I am on step 4 I am supposed to run setup.exe from the rom, but it doesn't have any setup.exe file in it, only 3 folders titled (boot, META-INF, system). I am on MAGLDR right now in USB flasher mode and dont know what to do. Please help me. Thanks
Click to expand...
Click to collapse
yea that guide is garbage looks like its for the dft flash version
most roms now use cwm to flash so you might wanna do some reading thru this section
http://forum.xda-developers.com/showthread.php?t=905841
How do I get this off my device now? Or do I not need to remove it
enter magldr, flash a diferent dft rom,
or
enter magldr, flash clockwork, enter magldr, enter clockwork, flah a zip rom (recommend you learn this method)
I tend to stay away from guides that all the links are just hotmegaupfile type links. if you want magldr, surely best to get it from the magldr thread, same with roms, hspl, everything.
safety first.
Yea just follow guides from xda only.
I think that http://quazen.com/shopping/consumer-electronics/how-to-get-android-on-hd2-nand/ should be closed.
That have nothing to do with XDA and so its not have any support here.
Hi,
I installed android 2.2 (NAND) on my HD2 yesterday. I did this using MAGLDR first and then an unknown android 2.2 rom with a DAF.exe inside it. Now I want to update 2.2 to CyanogenMod 7 (2.2.3). But the CyanogenMod folder doesn't contain a DAF.exe file.
How can I install it?
cm7 rom requires that u flash latest clockwork recover mod and then do the installation via it for further help u can fell free to pm me
el.duderino said:
Hi,
I installed android 2.2 (NAND) on my HD2 yesterday. I did this using MAGLDR first and then an unknown android 2.2 rom with a DAF.exe inside it. Now I want to update 2.2 to CyanogenMod 7 (2.2.3). But the CyanogenMod folder doesn't contain a DAF.exe file.
How can I install it?
Click to expand...
Click to collapse
Here you go-
http://forum.xda-developers.com/showthread.php?t=987531
Flash desired CWM and then follow instructions from your ROM thread.
I prefer SD-files recovery version ;-)
Thanks
HELP
Hi guys,
I have a big problem. I want to install this ROM on my HD2, but if i download this file i cant find the DAF.exe so how do I install it now? I already installed HardSPL 2.0.HSPL and I can enter the bootloader screen from MAGLDR. But if i do USB Flasher what must i do on the PC then i only downloaded some mapping with files in it but no .exe files or something like that. Hopefully some1 can help me.
I confused realy hard
I found a old DAF.exe file on my PC but if i use that he install a old android rom i want a new one how do i fix this?
you have to flash clockworkmod in magldr. then you can flash the rom within cwm. i bet that this is explained in your rom thread. please read the stuff before you flash something.
I put
TyphooN_CM7_v3.7.1-MAGLDR.zip
on the SD card and
used the program
"HD2 Android NAND Toolkit".
When using
"Install MAGLDR"
the process stucks at 0%
Do I need to downgrade my ROM version from v3.14 to a older ROM version?
Thank you very much for your reply.
Regards,
Wim
First, you need HSPL in order to install magldr
Thanks.
I manage to find HSPL4, and with this SPL3.03.000 was no problem. Now I could install Android om my HTC HD2 with WM3.14 installed.
I have HTC of German that i will like to change to English. here are the info from the phone:
HTC HD2 T8585
Rom version
3.14.407.2
I want someone to please recomend a rom or upload me a file to do the job. i dont want to damage the phone in anyway.
There's a function called "search" on the forum, if you want to hack your phone that will be necessary to use it at some point
Briefly, to change the language you must root your phone to install:
HSPL
Radio
A boot loader (MAGLDR or CLK)
CWM Recovery
and finally the custom ROM of your choice.
There are plenty of guides in the forum.
This one is a good start, it's recent and complete: http://forum.xda-developers.com/showthread.php?t=1640709
Thanks for your reply
Crippius said:
There's a function called "search" on the forum, if you want to hack your phone that will be necessary to use it at some point
Briefly, to change the language you must root your phone to install:
HSPL
Radio
A boot loader (MAGLDR or CLK)
CWM Recovery
and finally the custom ROM of your choice.
There are plenty of guides in the forum.
This one is a good start, it's recent and complete: http://forum.xda-developers.com/showthread.php?t=1640709
Click to expand...
Click to collapse
I know there's search button am just trying to be very careful because i have same phone damaged in the process of updating the Rom. i used HSPL4 to flash it before flashing with the rom I downloaded, now the phone stuked in bootloader (3 colors). I dont want the same thing to happen to this thatz why am asking if there's a special way of changing the language.
Here you can find all official ROMs if you`re interested only in language.
Just Flash HSPL 2.08 and then then run ROM file (as administrator) of your choice (3.14.xxx.x). In bootloader mode.
*To install any SPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
Otherwise the installation will fail!
Click to expand...
Click to collapse
Check this.
If you want change ROM to custom you can find some guides in my signature.