Database Users

Fix - Bootloader Stuck on Olipro 1.20 (HardSPL 1.20)

Hello all. I got myself into an interesting situation yesterday. I have a Titan that was just sent to me as a warranty replacement (a few hardware keys stopped working). In order to get it up to date, I used my Titan build 21042 kitchen, Radio 3.42.50, and Olipro2.40 SPL ... I had no GPS. I remember having a GPS problem with this radio, so I tried to flash 3.42.30 via USB which apparently can only be done with Olipro1.20 (radio can only be flashed via SD with 2.40 and 2.47) ... THIS IS WHERE I MADE MY BIG MISTAKE!!! ... I flashed Olipro1.20, flashed radio 3.42.30, flashed ROM, flashed nueSPL2.47. The SPL update did NOT take, so now I had 1.20 SPL, 3.42.30 Radio and 5.2.21042 CEOS ... The 1.20 SPL will not load this radio and OS!!!
The ONLY way I could successfully flash the SPL and have it take was to use Olipro 2.40 Unlocker, which uses JumpSPL to load SoftSPL, then flashes HardSPL ... This process needs the device OS running, which I could not get running at this point with incompatible software/firmware/SPL.
I fixed it!!! I had to use a radio and OS that were supported with Olipro1.20 ... I built an NBH file using radio 1.30.00 and DCD's Titan Kitchen 1.6.10, booted the device, modded Olipro's 2.40 Unlocker to use his SoftSPL to update to nueSPL2.47 (replaced the NBH file in the unlocker with nueSPL2.47 NBH file). After nueSPL2.47 was successfully flashed, I then flashed radio 3.42.30 and my 21042 OS ... FINALLY MY PHONE WORKS AGAIN, AND WITH GPS THIS TIME!!!
Here is the NBH file for recovering stuck HardSPL 1.20 (Olipro 1.20).
Here is the modded nueSPL 2.47 unlocker. (Cant upload right now ... Stupid work firewall!!!)
To recover from HardSPL 1.20:
-Flash Recover_SPL_1.20.nbh (from .zip)
-Boot device into OS
-Extract nueSPL 2.47 Unlocker, and run Titanunlocker.bat, follow instructions
To create recovery NBH:
Files Used:
Radio 1.30.00 from VZW 2.09.605.8 ROM Update
OS using dcd's titan kitchen 1.6.10
Modded unlocker - I call it Unlocker nueSPL2.47
Process:
nbhextract "VZW 2.09.605.8 - Radio 1.30.00.nbh"
rename 03_GSM.nb Radio013000.nb (don't worry, its actually CDMA)
(Build ROM with DCD 1.6.10 kitchen, copy RUU_Signed.nbh to working folder)
rename RUU_Signed.nbh dcd_os.nbh
nbhextract dcd_os.nbh
rename 00_OS.nb OS010610.nb
create a text file called NBHGEN_Script.txt with the following:
Code:
TITA100
HTC__001
DCD_1.6.10
WWE
300,Radio013000.nb
400,OS010610.nb
nbhgen NBHGEN_Script.txt
nbhgen will create a new RUU_Signed. Flash this NBH via SD or USB, boot OS, run Unlocker nueSPL2.47 after connecting device to PC via activesync (will flash SPL), flash radio 3.42.30 via SD, flash 21042 (or other GPS enabled ROM) via SD or USB.

cannot install cutolla rom on my jam,

hi, i cannot install cutolla rom on my i-mate jam, every time i install it, it trys to load jam in boot loader, but my jam restarts, except going into bootloader mode, i have big storage rom 2.3 TX www, plz help me, how to install cutolla rom or my original rom,

flash your device with some of shipped roms (not bigstorage mod) and then try to flash Cotulla's rom
shipped roms:
Code:
http://shipped-roms.com/shipped/Magician/
if you got error 120 use this
Code:
ftp://xda:[email protected]/Magician/Tools/MaUpgradeUt_noID.exe
then download some of cotulla's roms:
Code:
http://cotulla.pp.ru/Magician.html
HOPE IT WORKS
bye

How to install official ROM without USB cable

Hi everybody,
I'm have HTC Hero wich have some problems with USB. Windows has see this device as unknown device even when device is running at recovery(ra recovery 1.6.2), so I will send this hero to service when I have guarantee for he. But I have unofficial software therefore I have to install official ROM but I can't used RUU. Maybe is exists other way to install that software ?

have u tried just updating drivers?
[Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
....But no, as far as I know there is no method for installing an RUU without using a USB cable.

But I didnt need RUU, I only need information how to restore generic ROM for my hero

przeqpiciel said:
But I didnt need RUU, I only need information how to restore generic ROM for my hero
Click to expand...
Click to collapse
To restore generic ROM though, you use an RUU.

I had the same USB problem before I send it back for warranty to get it fixed. in order to install official rom without using USB:
1. get official rom which suit your HTC from http://forum.xda-developers.com/showthread.php?t=559622
2. flash the rom like you flashing other custom rom to your htc.
3. If you use flashrec to root your hero you probably have backup of your recovery image, put it on your sd card run flashrec this time restore your original recovery image. (if you dont have backup of your origiinal recovery image I uploaded mine in this post http://forum.xda-developers.com/showpost.php?p=4972904&postcount=41)
4. that's it! you got your virgin hero back. (http://forum.xda-developers.com/showpost.php?p=4965845&postcount=39)
if you have Nadroid back up of your Hero you can restore it in order to get back to original rom. but again you need to follow step 3 to flash original recovery image.

I have the same problem. I had restore the original android 2.1 (T-Mobile G2 Touch) from nandroid. But flashrec does not work on this version. I got an error message: "Flash FAILED: Could not run command." Had anyone a idea?

[Q] In need of some help with install

I've flashed a bunch of WinMo custom ROM's, but this is my first time attempting to install a NAND build. I received my phone back from warranty repairs last week so I'm currently running a stock 3.14 ROM. I've got a stock 1.66 ROM that I'm planning on installing from the SD card to get a SPL that is compatible with HSPL. I want to run a Task29 before I install a NAND Android ROM (MJD's latest build, I'm thinking), but I'm not entirely sure how I should go about this.
This is as far as I've gotten as far as the install procedure goes:
1. Flash the 1.66 ROM through SD card
2. Install HSPL
3. ???
As I said, I want to Task 29 the phone before I install 'droid to make sure everything runs smootly. Can anyone list out the rest of the steps I need to do to and what's the best app to Task29 the phone for me?

Flash a radio 2.08 or above. e.g 2.15.50.14
Only flash 2.xx.50.xx radios btw, if you have a EU hd2. For T-Mo HD2, i'm not sure on the requirements sorry.
Either way, search it up, snoop around the forum, look at stickies, you'll prolly find a guide or something that tells you the radio requirement for T-MO devices.
Then flash MAGLDR, it's done by flashing a regular rom through usb.
Then download your NAND build of choice, and install. Remember to install as an administrator.

Plz read this great guide http://forum.xda-developers.com/showthread.php?t=893948

I don't need to have a WinMo ROM present when I install MAGLDR on the phone, right? I'll be able to install it from the boot loader as long as I have a compatible radio on the phone, correct?
So right now the install goes like this, someone correct me if I'm wrong
1. Flash the 1.66 ROM through SD card
2. Install HSPL
3. Task 29/Install .50 radio
4. Install MAGLDR via boot loader
5. Install a NAND Android ROM via MAGLDR
6. Profit!

novaci said:
I don't need to have a WinMo ROM present when I install MAGLDR on the phone, right? I'll be able to install it from the boot loader as long as I have a compatible radio on the phone, correct?
So right now the install goes like this, someone correct me if I'm wrong
1. Flash the 1.66 ROM through SD card
2. Install HSPL
3. Task 29/Install .50 radio
4. Install MAGLDR via boot loader
5. Install a NAND Android ROM via MAGLDR
6. Profit!
Click to expand...
Click to collapse
Yes, that's correct.
There's a link above, but I found this guide to be very detailed...
http://forum.xda-developers.com/showthread.php?p=11097380
If you have any problems at all, that will help you.
Good luck mate

[NoDo ROM]HD7_hTC_Asia_SEA_2.20.841.02_Radio_5.65.09.11a _22.44.50.15U_NoDo, by ansar

Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Schubert_hTC_Asia_SEA_WWE_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following releases:
1. RUU_Schubert_hTC_Asia_SEA_WWE_1.54.728.01_Radio_5.51.09.29_22.32.50.10U
2. RUU_Schubert_hTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your HD 7 is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.728 i.e. with characteristic value 728
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_hTC_Asia_SEA_WWE_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo_by_ansar
2. Download this zip ROM file: RUU_Schubert_hTC_Asia_SEA_WWE_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar

Why is the rom firmware update is Telstra Operator? instead of SEA ?

177412c0 said:
Why is the rom firmware update is Telstra Operator? instead of SEA ?
Click to expand...
Click to collapse
Hi,
Cause in the thread title has characteristic value [CV] 841
Regads, ansar

What's new in ROM, plz...

drnothing said:
What's new in ROM, plz...
Click to expand...
Click to collapse
Hi,
NoDo (OEM & SYS) and Radio, it is compact i.e. min size and fast
Regards, ansar

Telstra Nodo Rom for Telstra HD7???
Hi Ansar....Loving your work mate.
I noticed you have used the Telstra HD7 'nodo' rom as a base for a few variants.
Is there any chance your could sign one so it can actually load on to the Telstra HD7. I a demo Telstra HD7 in need of an update to nodo.
I tried the SEA releases using the CV 841 but to no avail and was hoping you could realse a signed one that will owrk on a the 841 variant.
Cheer.
Amsim

Amsim said:
Hi Ansar....Loving your work mate.
I noticed you have used the Telstra HD7 'nodo' rom as a base for a few variants.
Is there any chance your could sign one so it can actually load on to the Telstra HD7. I a demo Telstra HD7 in need of an update to nodo.
I tried the SEA releases using the CV 841 but to no avail and was hoping you could realse a signed one that will owrk on a the 841 variant.
Cheer.
Amsim
Click to expand...
Click to collapse
Hi,
I will try to develop one
Thnx for supporting!!
Regards, ansar

NoDo ROM SEA_2.20.841.02
I was able to use DFT's RSPL & HSPL successfully and I by coincidence reflashed my HD7 with RUU_Schubert_hTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U_by_ansar
Now, my SPL version is 1.57 (not available in DFT's RSPL list) so I want to change it to 2.20 (which is available in DFT's RSPL list) by using these two ROMs but was unsuccessful (followed your instructions correctly)
I got ERROR [244] Invalid Model ID
Why is that?

Hi there. how can I install this coming from deepshining rom?