I searched the forum and could not find a solution. ActiveSync does not recognize my phone. This problem stared after I installed HTC Sync. Connection to PC as storage card works fine. I removed HTC Sync but the problem still exists. Any help would be great.
Only works on sense roms.
I am using a Sense ROM. That's not the problem. My phone used to connect to ActiveSync before I installed HTC Sync. Now it doesn't.
Activesync is for WinMo.... When running android, activesync won't recognise your phone.
Why do you want it to?
If it's for flashing, connect via Tri-Colour bootloader (phone off, hold vol-, press power).
MattOG said:
Activesync is for WinMo.... When running android, activesync won't recognise your phone.
Why do you want it to?
If it's for flashing, connect via Tri-Colour bootloader (phone off, hold vol-, press power).
Click to expand...
Click to collapse
Thank you mate. You saved my day. I'm new to Android, sorry for this noob question. Thread can be closed as problem is no problem.
Related
Any solutions? my computer will recognize at first but then it says not connected and wont let me acess the files on my wing. Im using Windows Vista btw.
Can somebody help me with this problem?
I am using vista also.. try soft reseting it.
I tried soft resetting it and hard resetting it and it still doesn't work. Now I'm contemplating ever getting Touch It 2.3
Try going in settings->connections->usb to pc and either check it if its not checked or uncheck it if it is checked
Mine did this too last week. Reflash your phone with the official Tmobile RUU posted in the forum.
My steps were:
-Go into bootloader mannually (camera button plus voice command button and finally with those two press, click in the hole (between memory and volume key) with your styles)
-After it seems that pc loaded up some kind of driver, double click on the official Tmobile RUU and flash your phone to stock form.
this should work and goodluck...
I've connected my Wing on my friend's computer and it's recognized by his ActiveSync but its Windows XP he's using. Is there any way i can reinstall or change some settings on my computer so that it can recognize my Wing again? I really prefer the windows xp activesync over the windows vista version but theres no way of getting the old activesync on vista.
Finally!! I fixed the problem! I had to install version 6.1 from microsoft's website, and everything is good now. thanks for the help everybody.
do you have the link to that update im having the same problem
nm i got it, thanks for the solution though
Hi
I am new here so I need a bit of help.
I do the hard SPL but everytime my phone switches off after launching it.
It is connected to active sync, when I start reset phone askes me if I allow, when I press yes it switches itself off, so loosing connection to active sync
Help please
Reinhardbaer said:
Hi
I am new here so I need a bit of help.
I do the hard SPL but everytime my phone switches off after launching it.
It is connected to active sync, when I start reset phone askes me if I allow, when I press yes it switches itself off, so loosing connection to active sync
Help please
Click to expand...
Click to collapse
To get HSPL onto your device your phone only needs to be connected by usb cable to pc, it does not need to be sunc'ed via activesync, i.e. your device needs to be in bootloader.
Read and follow this guide and you should be fine
Thread closed
Hi, i am proud to say i have a hd2 in my "pocket" but i have a little problem.
I successfully flasht my rom to Artemis v18.0. but then i encountered THE problem, my active sync wont work, so i thought i just flash it to energie rom or something like that. but if i cant connect to my phone then its gonna be difficult to flash.
so,.. i heard something about flashing from your sd card ?. i have a 8 gb microSD.
is that even possible or do i just need to brick my phone ?
Thanks in advance.
you dont need to be connected to active sync mate put the phone in bootloader turn off usb connections in active sync and connect the phone to the pc should change from serial to usb if it does you can flash,
just a quickie though did you uncheck the in youre phone in usb to pc the active sync enable faster sync
Demon_man said:
you dont need to be connected to active sync mate put the phone in bootloader turn off usb connections in active sync and connect the phone to the pc should change from serial to usb if it does you can flash,
just a quickie though did you uncheck the in youre phone in usb to pc the active sync enable faster sync
Click to expand...
Click to collapse
Uhm no i did not, why? is that just a useless option?
and im now in the bootloader, and it does indeed says serial in the bottom, but how does the phone knows what rom it needs ? do i need to copy the rom to the sd card or something ?
ok the reboot youre phone connect it to active sync and untick the box before you flash mate it could be your problem, if not come back and ill help ya
Hmm i unchecked the faster data sync, and rebooted and then tried to connect, but both the phone & wmdc seems to do nothing. weird problem.
and it gets wors, cuz i dont have an card reader on my pc. so i also cant copy the rom to the SD card.
1.ok so you download the ROM you want,
2.then restart you're phone in bootloader mode (turn phone on while holding vol down) phone should say serial
3.in active sync on the pc go to connections and disable usb connections
4.plug your phone into the usb serial should change to usb if it does youre set to go
5.if all above ok you would open the RUU that came with the ROM you downloaded and follow the instructions from there to flash again,
I'm guessing you have a hspl or one of the others as you have laready flashed you're device
okay its flashing now.. , i followed the steps you provided and it worked. and i have hspl 2.08 , anyways thanks for your time & help, much appreciated m8.
Greetz KapiteinKoek007
No probs hope active sync gets sorted
Hmm i flashed it to energie rom, and now when i call or when im called and i answer the phone freezes & reboots :S, any suggestions ?
KapiteinKoek007 said:
Hmm i flashed it to energie rom, and now when i call or when im called and i answer the phone freezes & reboots :S, any suggestions ?
Click to expand...
Click to collapse
did you hard reset after flashing?
if I was on your case and HR didn't help, i would perform a task24 cleaning and then flashing (always doing a HR after the flashing)
hope that helped.
task 29 !!
okay, im gonna trie that, thanks!
Demon_man said:
task 29 !!
Click to expand...
Click to collapse
29 sorry
Hello I am trying to get active sync to work but when i go into the bootloader and plug in the usb windows installs the driver for the sync from htc i really need to install magldr 1.13 but i cannot get past the driver any ideas
thanks in advance
You do not need active sync. If you want to install MAGLDR just start bootloader and flash from there Hold Volume Down while starting the phone you will get the TriColored screen plug the phone into computer at the bottom of the phone it will say USB then click ROMUpdateUtility in the MAGLDR folder you downloaded. If the phone doesnt say USB try a different USB port
cannot sync in bootloader
wrecless said:
You do not need active sync. If you want to install MAGLDR just start bootloader and flash from there Hold Volume Down while starting the phone you will get the TriColored screen plug the phone into computer at the bottom of the phone it will say USB then click ROMUpdateUtility in the MAGLDR folder you downloaded. If the phone doesnt say USB try a different USB port
Click to expand...
Click to collapse
I am going to try on a different computer this afternoon. But I tried Everything you said Got to the bootloader just fine i even tried running the ROMupdateutility as admin. It gets to the progress bar just after you click update and then comes back with a usb error. I cannot seem to figure what the problem is other than my driver is not working properly. so i tried to uninstall the driver and it keeps reinstalling the htc usb sync driver form the windows update. like i said ill try it on a different computer and see if that works. thanks for your reply though.
Yes the problem is in your computer. It happened same with my laptop an computer. I formated and installed fresh copy of windows on the laptop. Now it is O.K.
thanks alot that was i thought about doing but...... I have Like a terrabyte to backup
First try reinstalling ActiveSync and try using a different usb port (preferably one at the back of the pc). Boot into bootloader and connect to pc, you need to see "usb" displayed on the phone screen.
You need active sync from ms. Not from htc. It's the soft provided by ms to sync wm devices. Normally it's downloaded when you connect your device. Check if windows try to install the driver. After you will also need the adb driver. For this one you need the android sdk.
Sent from my HD2 using XDA App
Hello.
I have MDJ Cyanogenmod 7 v2.6 installed on my HD2.
Now i am trying to go back to windows or play with other roms and instal Magldr 1.13.
But when i try to install them. I have to use a Activesyns connection between my PDA and PC. But the only thing i can choose on my phone is USB Mass Storage (On/Off).
And then the installation fails because it can't find my phone.
How do i get a Activesync connection on Gingerbread.
Can't find it anywhere.
Paul1990 said:
Hello.
I have MDJ Cyanogenmod 7 v2.6 installed on my HD2.
Now i am trying to go back to windows or play with other roms and instal Magldr 1.13.
But when i try to install them. I have to use a Activesyns connection between my PDA and PC. But the only thing i can choose on my phone is USB Mass Storage (On/Off).
And then the installation fails because it can't find my phone.
How do i get a Activesync connection on Gingerbread.
Can't find it anywhere.
Click to expand...
Click to collapse
Considering it's early here, I'm having my coffee, I'm not going to flame you for the dumb question, you can't active sync your hd2 on android, active sync is for windows mobile only, just power down, and power back up holding the volume down button, it will go into bootloader mode, plug your usb cable and you'll see usb display at the bottom of the screen, now you should hear the phone connecting to your pc and you can run any windows mobile RUU and flash back to stock , or run task 29 and flash windows mobile.
Thanks!!! I really couldn't find it. Probaly because i was searching with the wrong thoughts.
It worked!
thank you sir...i was wondering the same mistake now i understoood