Database Users

lacking bluetooth option on my active sync

help please i can not sync using bluetooth because of the bluetooth option on my active sync is lacking. i can only see the 115200, 19200, 38400, 57600 and USB... any patch for this? thanks...

also, why i can not make any upgrade? my rom version is 1.11, i want to upgrade it to 1.12 or 1.13... everytime i put my device into bootloader, there is data (version of rom and radio) read into my device please help... thanks

I did not quite understand your second question. When you see the rom version number and radio rom number, then you are not in the bootloader mode.
I think you might mean that you cannot get into the bootloader mode. In that base, you need to do another hard reset when you see the boot flash. Actually you need to do TWO hard resets to get the bootloader mode - first reset to the start flash, then before the start flash disappear, do the second reset.

OK, to get bluetooth Active sync working, you can view my guide HERE
To get into Bootloader mode, you need to hold both the camera and power buttons and hit the reset button with your stylus. Continue holding the camera and power buttons until you see "USB 1.0". You wont be able to turn on the backlight when this appears but you should be able to see it ok if you're indoors.

Wizard Hangs..is dead like a BRICK

Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz

it is time to donate to XDA-developers!

Just reflash the ROM, friend. Seems to be a bad flash to me.

deleted this post

wiztek said:
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
Click to expand...
Click to collapse
try another cooked ROM or an official one and see if problem persists...

the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom

z0d1ak said:
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
Click to expand...
Click to collapse
Rom has got nothing to do with Activesync not detecting your phone,it's most probably the problem of Activesync application or your USB cable not establishing connectivity.Check the usb connectivity for problems.To verify the connectivity,check if it gets charged via usb connection.
secondly,get your phone into bootloaders and connect it to your Pc via usb cable,see if usb appears at the bottom of the bootloader mode (multicolor screen),if it then it's connecting.
You don't need Activesync for flashing a Rom to your phone,it's done via usb cable,and while flashing activesync is automatically turned off by the Ruu.So if you are able to establish connectivity via usb cable in bootloaders (multicolor screen) you can flash to any Rom.
Cheers

hard rest

im getting to the yes/no page but when i press r nothing is happening??????

thunderider said:
im getting to the yes/no page but when i press r nothing is happening??????
Click to expand...
Click to collapse
I assume you mean a hard reset to completely revert your phone to factory settings.
I also assume that the two soft keys and stylus in the hole is giving you the yes/no question.
The alternative could be to try:
Start>Settings>System (Tab)>Clear Storage (Icon)
Mike

cheers mike...im constantly finding the whole experiance frustrating with this phone...might stick it a jify bag to you to upgrade

i think this is the end of the road for me n hermes,i did a rest as above ,that worked ok,i though before i set everything up again ill put a new rom in it,ive got ruu-hermes-tmo 3.60.110.4,if thats right?,it gets to the screen red green blue white,i presume this is hard spl or bootlocker? but it wont active sync with the computer,so im gonna ditch it,its to unstable for anything,ever simply downloading photos becomes a pain as its always running out of memory,als it still wont recognise my sd card wich has everything on so its usless....back to the sonr k8501 while i look for something else...iphone....blackberry...e71....communicator....these htcs are not simple bits of kit...

thunderider said:
i think this is the end of the road for me n hermes,i did a rest as above ,that worked ok,i though before i set everything up again ill put a new rom in it,ive got ruu-hermes-tmo 3.60.110.4,if thats right?,it gets to the screen red green blue white,i presume this is hard spl or bootlocker? but it wont active sync with the computer,so im gonna ditch it,its to unstable for anything,ever simply downloading photos becomes a pain as its always running out of memory,als it still wont recognise my sd card wich has everything on so its usless....back to the sonr k8501 while i look for something else...iphone....blackberry...e71....communicator....these htcs are not simple bits of kit...
Click to expand...
Click to collapse
The tri-colour screen is bootloader. Once in bootloader connect your device to your pc. The bottom of bootloader should change from 'serial' to 'usb'. Once usb' is shown you are able to flash rom

hi spartan,wots happening now,i can active sync the phone to pc,but one i launch the ruu,it goes in to boot loader then active sync closes down,not connected,also i found after doing hard reset it no longer sees my sd card....wich had everything on it....but i have no card reader/adaptor.....

thunderider said:
hi spartan,wots happening now,i can active sync the phone to pc,but one i launch the ruu,it goes in to boot loader then active sync closes down,not connected,also i found after doing hard reset it no longer sees my sd card....wich had everything on it....but i have no card reader/adaptor.....
Click to expand...
Click to collapse
It is normal procedure for activesync not to be running when in bootloader as phone is not booted up. To flash a rom all you need is phone connected to pc via usb cable. You do not need activesync.
Put phone into bootloader. Bottom of screen should say 'serial'. Now connect phone to pc via usb cable. Bottom of bootloader should now change to 'usb' after a few seconds. You are now able to run ruu file from pc

Can't Flash HD2

Hi, i am proud to say i have a hd2 in my "pocket" but i have a little problem.
I successfully flasht my rom to Artemis v18.0. but then i encountered THE problem, my active sync wont work, so i thought i just flash it to energie rom or something like that. but if i cant connect to my phone then its gonna be difficult to flash.
so,.. i heard something about flashing from your sd card ?. i have a 8 gb microSD.
is that even possible or do i just need to brick my phone ?
Thanks in advance.

you dont need to be connected to active sync mate put the phone in bootloader turn off usb connections in active sync and connect the phone to the pc should change from serial to usb if it does you can flash,
just a quickie though did you uncheck the in youre phone in usb to pc the active sync enable faster sync

Demon_man said:
you dont need to be connected to active sync mate put the phone in bootloader turn off usb connections in active sync and connect the phone to the pc should change from serial to usb if it does you can flash,
just a quickie though did you uncheck the in youre phone in usb to pc the active sync enable faster sync
Click to expand...
Click to collapse
Uhm no i did not, why? is that just a useless option?
and im now in the bootloader, and it does indeed says serial in the bottom, but how does the phone knows what rom it needs ? do i need to copy the rom to the sd card or something ?

ok the reboot youre phone connect it to active sync and untick the box before you flash mate it could be your problem, if not come back and ill help ya

Hmm i unchecked the faster data sync, and rebooted and then tried to connect, but both the phone & wmdc seems to do nothing. weird problem.
and it gets wors, cuz i dont have an card reader on my pc. so i also cant copy the rom to the SD card.

1.ok so you download the ROM you want,
2.then restart you're phone in bootloader mode (turn phone on while holding vol down) phone should say serial
3.in active sync on the pc go to connections and disable usb connections
4.plug your phone into the usb serial should change to usb if it does youre set to go
5.if all above ok you would open the RUU that came with the ROM you downloaded and follow the instructions from there to flash again,
I'm guessing you have a hspl or one of the others as you have laready flashed you're device

okay its flashing now.. , i followed the steps you provided and it worked. and i have hspl 2.08 , anyways thanks for your time & help, much appreciated m8.
Greetz KapiteinKoek007

No probs hope active sync gets sorted

Hmm i flashed it to energie rom, and now when i call or when im called and i answer the phone freezes & reboots :S, any suggestions ?

KapiteinKoek007 said:
Hmm i flashed it to energie rom, and now when i call or when im called and i answer the phone freezes & reboots :S, any suggestions ?
Click to expand...
Click to collapse
did you hard reset after flashing?
if I was on your case and HR didn't help, i would perform a task24 cleaning and then flashing (always doing a HR after the flashing)
hope that helped.

task 29 !!

okay, im gonna trie that, thanks!

Demon_man said:
task 29 !!
Click to expand...
Click to collapse
29 sorry

[Q] ActiceSync does not recognize phone

I searched the forum and could not find a solution. ActiveSync does not recognize my phone. This problem stared after I installed HTC Sync. Connection to PC as storage card works fine. I removed HTC Sync but the problem still exists. Any help would be great.

Only works on sense roms.

I am using a Sense ROM. That's not the problem. My phone used to connect to ActiveSync before I installed HTC Sync. Now it doesn't.

Activesync is for WinMo.... When running android, activesync won't recognise your phone.
Why do you want it to?
If it's for flashing, connect via Tri-Colour bootloader (phone off, hold vol-, press power).

MattOG said:
Activesync is for WinMo.... When running android, activesync won't recognise your phone.
Why do you want it to?
If it's for flashing, connect via Tri-Colour bootloader (phone off, hold vol-, press power).
Click to expand...
Click to collapse
Thank you mate. You saved my day. I'm new to Android, sorry for this noob question. Thread can be closed as problem is no problem.