So I've managed to root the tab fallowing instructions, however, I'm wondering if there's any know app that can toggle the storage to be accesible via usb on my laptop. I know the storage within is basically acting like a sd card.
Not that I know of I just use adb
Sent from my GT-P7510 using XDA Premium App
sure!! just uncheck USB debugging then connect the USB cable
I just updated my US Xoom WiFi to 3.2. The SD card is working fine and it is shown under mnt\external1. However, I still cannot access my USB thumb/flash drive even I have a Motorola OTG adapter. Looks like 3.2 does not support USB thumb/flash drive. Any suggestions? Or I have to root it and install a custom kernel to make it work? Thanks.
I'm wondering the same thing. Will have to flash another kernel...
Who uses thumbdrives and USB discs these days anyway?
Uhm, everyone?
USB thumb drives and external drives are supported fine on 3.2, download USB Mass Storage Watcher OTG from Market
follow the quick guide and all works great.
stevejau said:
USB thumb drives and external drives are supported fine on 3.2, download USB Mass Storage Watcher OTG from Market
follow the quick guide and all works great.
Click to expand...
Click to collapse
I understand, but I mean on stock 3.2 without root, which the OTG app needs.
Or did you got it working without root?
my xoom is rooted, i am not sure of any USB OTG apps that work without root. I will do some research.
After updating to 3.2 with root, I tried USB Mass Storage Watcher OTG and first it complained about an old version of busybox , then after it updated busybox, it would just FC when I plugged in a flash drive.
I wonder what is the reason that 3.2 still does not support USB mass storage. I wish this will be addressed soon.
If it is any consolation to you, my 3g Telstra xoom on 3.1 with sd card support and usb enabled still doesn't work unless i have an OTG cable and USB Mass Storage Watcher OTG. Usb works fine for mice etc without usb mass storage watcher.
I use this USB host cable and it works great. Have tested it with my 750gb Oyen and 320gb WD Passport external HDD's, several usb flash drives (8-16gb), San disk USB memory card reader, and a USB keyboard.
For those having issues getting their Xoom to recognize USB storage devices here's what I've got and did to get it to work: I flashed my XOOM (3.1) to the 2.6.36.4 Tiamat_Xoom-v1.4.4-Full_Throttle Kernel and was unable to get the USBMount to recognize drives or storage at first. I installed USB Mass Storage Watcher from the market (it's free) and it works awesome! Can mount any storage I want (NTFS, FAT16/32, HFS, HFS+, EXT2, ETX3, EXT4) with any capacity. I think this app will work with any rooted Xoom (or other devices). Under my Kernel my USB host is located under/usbOTG.
Hope this helps.
Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?
hunix said:
Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?
Click to expand...
Click to collapse
Sounds like your cable is not OTG. A lot of them are not. Try it again with your Moto cable when it comes. Also, try rebooting with the cable and drive plugged in, with OTG Watcher running. That has worked for me in the past.
Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?
sdsi said:
Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?
Click to expand...
Click to collapse
You do need root to mount the drive-to use Xoom in USB Host Mode.
Only root? Is that all that needs to be done?
spinstartshere said:
Only root? Is that all that needs to be done?
Click to expand...
Click to collapse
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.
okantomi said:
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.
Click to expand...
Click to collapse
it works great on rooted stock kernel 3.2 with "Drive Mount" but from the market you can not install "Drive Mount" it says not supported.
If the program is free could someone post the apk?
Sent from my Xoom using xda premium
3devious said:
If the program is free could someone post the apk?
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
busybox also needed
it is free and here is it
I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.
uhs74 said:
I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.
Click to expand...
Click to collapse
Just tried with a genuine motorola OTG cable, which works with the same stick because I used it for upgrading my UK one to US ICS 4.0.3, and it doesn't work without rooting. I still can't root mine yet because my micro SD card for backup hasn't come!
hello
i have wifi xoom android 4.0 rooted with timat kernal
the usb host mount fine but i coudln't found the files in the file explorer
when i mount hard drive fat 32
also when i mounted the ntfs hard drive it shows me 0mb in the usb mount app !
what is the problem
read usb drive from rooted xoom
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.
uhs74 said:
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.
Click to expand...
Click to collapse
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
Oh i got it wrong link but i used OTG adapter.
derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
How's that digger from a USB ORG adapter? Just curious.
Sent from my ADR6350 using Tapatalk
Everything works only if its Fat32. NTFS needs new kernal loaded. I am Rooted but Stock. 4.0.4.
Reboot loop after trying to get external USB to work
My Xoom WiFi running Team EOS build 102 would not see my USB drives. I installed 'USB Mass Storage Watcher' from the market. This app then prompted me to install the OTG version. I followed instruction and removed original version before install the OTG version. The OTG version also prompted me to down load another version of Busy Box, which I did.
I could then see one of my USB (see size and space used), but could not see files or folders in the mount location. I restarted my Xoom (I live in a windows world and reboot fixes a lot of issues LOL), Xoom got stuck in reboot loop. I went into recovery mode and clear my Dalvik, but this had no effect on reboot loop.
Luck for me I had a Nandroid backup from 2 days earlier (pheew). Restored this and back to normal.
Not sure if anyone has had this problem, but I strongly recommended making nandroid backup before doing any device driver updates.
No Prob...
im on the same software version as u, i connected usb drives, mouse and keyboard without any problems, just wanted to let u kno
I can see my 16 gig usb stick and move and use files. When I plug in my My Touch Slide 4G and put it into "disk drive" mode, it cannot see it. Is this an issue with 32gb card too big? Or is it an issue that the files I want are "seen" differently than a standard memory device?
When I connect the phone to my computer that way, it looks just like any other external drive.
Thanks
I personally have my g2x plugged in and it mounts sd too, have you enabled debugging?
Posted from my a500 oc @ 3ghz ddr3 speed 17% boost. Taboony 2.2 Honeyvillan 2.4+ custom with ntegra fixes. 17890 cf-bench, 9000 antutu. Custom named n-Game OS v 1.2.3b.
USB Storage from phone to tablet
My My Touch Slide 4G works just fine as a disk drive when connected to my Windows 7 desktop or my XP laptop. USB debugging is on and it is set to work just like a memory device. I have tried a 500 gb external drive and a usb stick drive.
When I connect the phone to my tablet, the usb and debugging icons come up on the phone. The sd card is inaccessable because it is not mounted to the phone. When I use either Astro File Manager or Root Explorer (I am not rooted) I get no files on the USB storage "folder". Blank. No files. When I tried this on Root Explorer, it just shows that I don't have root access. I'm thinking that if I had root access that I could get at the files.
My phone is rooted, which is why I have Root Explorer. Since I got the Slide as a replacement for the my G2 I no longer have any custom rom in the phone.
So, anyone know why I cannot get to my phone files?
Thanks again
We have the same devices!
I would just use Bluetooth File Transfer. It's free in the Market and works fast. Just install it on both devices. I use it to transfer files from the A500 to my MT4GS and my wife's G2.
Sent from my myTouch_4G_Slide using XDA Premium App
Hi, I'm trying to access a USB storage on my nexus 7, got a few different apps but nothing. Does the nexus have to be strictly rooted in order for it to work? Or can i do it on stock? Im stock btw.
Thanks.
There's a Nexus Media Importer app that will let you read from USB storage through your OTG. But if you want read and write capability, you'll need to root your device and use a root level app like Stickmount.