Database Users

[Q] Bricked Epic - tried everything

Well first off, ive been at this for 2 days and its frustrating. I am new to this flashing and rooting business and ended up bricking my phone from using the wrong files in metamorph and never backing my stock files up. It would give me a blank screen with the red LED lit up and all my home buttons on the bottom lit up. I followed the Odin directions and actually got my phone to stock. But it was extremely laggy and and i had no service and my SD card just kept connecting and reconnecting. Well i followed the flashing kernel threat because someone told me to try that so i can get the stock kernel or whatever on the phone. That failed and now im sitting here with my phone displaying a phone icon and a computer icon, then a caution symbol in the middle. Someone pleaseeee help me fix this.

l2,
I've been there 3 times this morning already as I hadn't flashed a new zImage to this particular device yet until this morning. What you need to do is get the stock files from http://rapidshare.com/files/415661977/SPH-D700-DG27-8Gb-REL.tar.html and s1_odin_20100513.pit (it must be 13, not 12). Boot into Download mode (hold 1 when powering on). Start Odin 3, check Auto Reboot and Debug En. Choose your PIT file, and under PDA choose the SPH-D700-DG27-8Gb-REL.tar. Plug in your phone, once it is recognized in Odin click Start. This takes about 10 minutes, I know it looks like it hangs up a couple of times but it should keep going. Let me know if that helps.

khalaan said:
l2,
I've been there 3 times this morning already as I hadn't flashed a new zImage to this particular device yet until this morning. What you need to do is get the stock files from http://rapidshare.com/files/415661977/SPH-D700-DG27-8Gb-REL.tar.html and s1_odin_20100513.pit (it must be 13, not 12). Boot into Download mode (hold 1 when powering on). Start Odin 3, check Auto Reboot and Debug En. Choose your PIT file, and under PDA choose the SPH-D700-DG27-8Gb-REL.tar. Plug in your phone, once it is recognized in Odin click Start. This takes about 10 minutes, I know it looks like it hangs up a couple of times but it should keep going. Let me know if that helps.
Click to expand...
Click to collapse
okay ill try all of that but Where can i get the 13 pit file?

It can be downloaded from this link.
http://www.4shared.com/get/6aSCPmEf/s1_odin_20100513.html

khalaan said:
It can be downloaded from this link.
http://www.4shared.com/get/6aSCPmEf/s1_odin_20100513.html
Click to expand...
Click to collapse
thanks so much man ill try it out. One question though. I already started this odin thing and its doing its thing. its about half way done but its using the 12...can i just shut my phone off and put it in download again when its done and use the 13 and it will work?

If you have it going with the 12 already I'd give that a try, if it doesn't work you can always get back into download mode and do it with 13. I couldn't get 12 to ever start it would always sit for 20m and do nothing.

khalaan said:
If you have it going with the 12 already I'd give that a try, if it doesn't work you can always get back into download mode and do it with 13. I couldn't get 12 to ever start it would always sit for 20m and do nothing.
Click to expand...
Click to collapse
okay yeah ill try. but its been sitting for like 10 min at half way on the status bar...

That is way the devil too long, go ahead and unplug your phone, hit reset in odin, set it up like I instructed, reboot your phone to download mode, and give it another go.

yeah lol okay i thought so. haha

Alllll fixed. Thank you guys soooo much for helping out. Im going to root again but i'm not gunna mess with metamorph this time lol, whats a good root? Im learning all this stuff and idk what one i should do.

http://forum.xda-developers.com/showthread.php?p=8628341#post8628341
>_>

Please Modify Title of Thread add
" Solved - Bricked Epic - tried everything "

I bricked my Epic last weekend and am feelin' ya on all the stuff you did to unbrick it. Glad to hear that all is well~

I screwed my setup up and had to do the Odin method yesterday. I didn't read this post before hand, and I used the ****12.pit instead of the 13. What is the difference in the two? My phone seems to be working just fine with the 12. One problem I found I don't believe I had before is theming the dialer_tab_activity.apk FCs the phone on hangup, but when I put another one in unthemed, it works fine.

help
I cannot get phone to load any tar completely.. they all stop and phone's screen goes purple. Most the time it hangs in odin at the zImage and then sometimes it gets a few bars going .. and hangs at factoryfs.rfs. Any help

You don't need the pit file when flashing a tar rom. It's only for modems and kernals. I have used Odin and haven't used the pit. Works just fine.

Okay, i just joined. Sorry if i sound ignorant (most likely cause I am) but i am fairly certain i semi-bricked my Epic, okay so it started when i flashed the CyanogenMod it was very laggy so i figured i did it wrong, quickly using clockwork i flashed VIPERrom (FRoZeN) DK28 all looked fine but then my phone's service started acting up, so i tried to re-flash CyanogenMod. This ***** it up worse it got stuck at the Samsung boot logo, now i am trying to revert to Stock but Odin nor my Cpu recognize the Device.
Extra info that might help, I have the Stock Tar, Odin 1.6 with Pit, can get into both download and CW recovery...
Help this ignorant fool please T_T

The Boxinator said:
Okay, i just joined. Sorry if i sound ignorant (most likely cause I am) but i am fairly certain i semi-bricked my Epic, okay so it started when i flashed the CyanogenMod it was very laggy so i figured i did it wrong, quickly using clockwork i flashed VIPERrom (FRoZeN) DK28 all looked fine but then my phone's service started acting up, so i tried to re-flash CyanogenMod. This ***** it up worse it got stuck at the Samsung boot logo, now i am trying to revert to Stock but Odin nor my Cpu recognize the Device.
Extra info that might help, I have the Stock Tar, Odin 1.6 with Pit, can get into both download and CW recovery...
Help this ignorant fool please T_T
Click to expand...
Click to collapse
You forgot to flash the EXT4 or RFS Kernel
http://android.stolenrobot.com/Epic4G/epic.htm
that comes with cyanogen it looks like just put either on your sd card then flash after you flash cyanogen in Cwm
Here is some more info
http://forum.xda-developers.com/showthread.php?t=935060&highlight=tutorial

iSaint said:
You forgot to flash the EXT4 or RFS Kernel
http://android.stolenrobot.com/Epic4G/epic.htm
that comes with cyanogen it looks like just put either on your sd card then flash after you flash cyanogen in Cwm
Here is some more info
http://forum.xda-developers.com/showthread.php?t=935060&highlight=tutorial
Click to expand...
Click to collapse
I did flash EXT4 "CM6EXT4kernel-1-2-2011" this one to be specific.

The Boxinator said:
I did flash EXT4 "CM6EXT4kernel-1-2-2011" this one to be specific.
Click to expand...
Click to collapse
did you wipe x3 ?

Unlocking Vibrant

Hi there,
I am pretty new with this stuff, as I just got this phone today. It came with Froyo2.2 so I unrooted it back to the original JFK.
It did not come with a sim card, so I do not have a sim inside the phone as of now. But I do have a bell sim that I will use after to put the unlock key in... Is that okay?
I Connected the vibrant through Mini Kies and the MTP application says its connected.
I just re rooted from J16 back to the original.
I have the 64 bit drivers installed.
When I try to run Generate Unlock Windows Script I get the following error message saying...
Copy nv_data.bin
*daemon not running. Starting it now *
*daemon started succesfully *
error: device not found
error unable to find file <.\nv_data.bin>
could not find C:\documents and settings\1\desktop\key\generateunlockwindows\nv_data.bin
Anyone know what this means?
Or know what to do in this situation?
I am not sure if I should try installing the 32bit drivers or what.

how did you downgrade the phone from android 2.2?
I just bought the phone through ebay with the OS already at 2.2, and the phone is locked to t-mobile. I've heard it is not possible to unlock it with the 2.2 update. Is that true?

molson24 said:
Hi there,
I am pretty new with this stuff, as I just got this phone today. It came with Froyo2.2 so I unrooted it back to the original JFK.
It did not come with a sim card, so I do not have a sim inside the phone as of now. But I do have a bell sim that I will use after to put the unlock key in... Is that okay?
I Connected the vibrant through Mini Kies and the MTP application says its connected.
I just re rooted from J16 back to the original.
I have the 64 bit drivers installed.
When I try to run Generate Unlock Windows Script I get the following error message saying...
Copy nv_data.bin
*daemon not running. Starting it now *
*daemon started succesfully *
error: device not found
error unable to find file <.\nv_data.bin>
could not find C:\documents and settings\1\desktop\key\generateunlockwindows\nv_data.bin
Anyone know what this means?
Or know what to do in this situation?
I am not sure if I should try installing the 32bit drivers or what.
Click to expand...
Click to collapse
Yup, having exact same problem. If you find a fix let me know.

Make sure your usb setting is on debug and you have all of the files for the unlock on your pc. You also need java installed.
That method worked for me from stock.

can someone answer my question?

mbison83 said:
how did you downgrade the phone from android 2.2?
I just bought the phone through ebay with the OS already at 2.2, and the phone is locked to t-mobile. I've heard it is not possible to unlock it with the 2.2 update. Is that true?
Click to expand...
Click to collapse
I don't know whether the unlock methods work with Froyo but you can download a 2.1 stock Odin in the forum.

pvspencer22 said:
I don't know whether the unlock methods work with Froyo but you can download a 2.1 stock Odin in the forum.
Click to expand...
Click to collapse
where can i get it at and how do i do the rollback?

mbison83 said:
can someone answer my question?
Click to expand...
Click to collapse
...... please?

koooba said:
...... please?
Click to expand...
Click to collapse
very funny.

mbison83 said:
very funny.
Click to expand...
Click to collapse
Wasn't meant to be. Usually please and thanks goes a long way when asking for something. Shows appreciation.

^ Hence the THANKS button.

koooba said:
Wasn't meant to be. Usually please and thanks goes a long way when asking for something. Shows appreciation.
Click to expand...
Click to collapse
it also shows sarcasm and in this case thats what is seems like.

Read the stickies in the forum. If you can't figure it out ill grab the links tonight.

For the unlock this worked for me.
pvspencer22 said:
The windows tool worked for me from stock.
It doesn't generate a code though you input one.
Edit: link
http://forum.xda-developers.com/showthread.php?t=822008&page=11
Scroll down for instructions.
Click to expand...
Click to collapse
For going to stock. (From the general stickie)
draikz said:
Fixing so-called "Bricks"/Odin Errors
This guide is open to contribution/editing/correcting
-----------------------------------------------------------------------------------------------------
BOOT CYCLE
This is where you get the annoying Samsung Screen/Galaxy S screen.
DOWNLOAD REQUIRED (CREDITS TO JUSTANOTHERCROWD):
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
3. Open Odin (in Administrator if you're running W7 or Vista), try one of the ones I attached to this post, at least one of them is bound to work, some don't work for me, but works for others, some doesn't work for others, but works for me, whatever floats your boat
4. Load in the files into Odin that you have downloaded from above Just load in the files corresponding to the text field.
DO NOT CHECK REPARTITION.
5. Plug in your phone with the DL mode
6. Click start and wait for the magic
-----------------------------------------------------------------------------------------------------
NO-BOOT PHONES
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "BOOT CYCLE" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "BOOT CYCLE" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, except for the downloading parts, obviously.
-Phone not responsive?
*Try "NO-BOOT PHONES"section of this guide
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.
-Cannot get into download mode using the method I listed? Use the method(s) below:
Soldering Method
More methods coming soon
-----------------------------------------------------------------------------------------------------
I know how much of a pain posting in the Q/A section can be and the wait time is pretty bad, so if you need help regarding UNBRICKING and ONLY UNBRICKING feel free to post in here.[/S​
Click to expand...
Click to collapse

I unlocked my phone w Galaxy_S unlock 2 days ago. It's in the market and I was running Bionix V when I did it.

draikz said:
^ Hence the THANKS button.
Click to expand...
Click to collapse
Pretty soon we'll have apps that'll say hi and thanks and apps in general will replace everything we say, so much for what our parents taught us huh?

koooba said:
Pretty soon we'll have apps that'll say hi and thanks and apps in general will replace everything we say, so much for what our parents taught us huh?
Click to expand...
Click to collapse
Technology > your parents.
Anyday.

Do you know any other way i could unlock my samsung vibriant .nothing on this site has worked for me,,,who do i pay get files to work on this site please help poor black boy

franjess said:
Do you know any other way i could unlock my samsung vibriant .nothing on this site has worked for me,,,who do i pay get files to work on this site please help poor black boy
Click to expand...
Click to collapse
Poor with a few hundred dollars worth of phone. Lol
Did you try the PRO SGS app?

franjess said:
Do you know any other way i could unlock my samsung vibriant .nothing on this site has worked for me,,,who do i pay get files to work on this site please help poor black boy
Click to expand...
Click to collapse
If you want help you are going to have to be a lot more specific. What have you actually tried?
Just a tip, people will not help you on these forums if you ask for help without showing you've tried to solve the problem and know how to search.
There are loads of unlock threads. Almost everyone get one method to work eventually.

Brand new Nexus 4 and great trouble :/

hello guys i just bought my nexus and then started playing with it like rooting and stuff ,,
i was using the toolkit as i don't know the commands method
First i Unlocked the bootloader and then root and install recovery and then Installed Paranoid android from the recovery , all was working fine and suddenly the phone got too hot while i was on 3G browsing the internet i thought i should return to stock it may fix it .
i went into toolkit and pressed number 9 for factory image to download after downloading i flashed the factory image through it and then here was no cellular network and the X logo boot took alot of time to load now its restarting all the time after i tried to flash franco kernel again after rooting..
feeling tensed and crying :/

Get stock
https://developers.google.com/android/nexus/images
Then use the flash-all.bat file to wipe it clean, then boot into recovery, and factory reset it and wipe the cache.

m4r0v3r said:
Get stock
https://developers.google.com/android/nexus/images
Then use the flash-all.bat file to wipe it clean, then boot into recovery, and factory reset it and wipe the cache.
Click to expand...
Click to collapse
i m a total noob can u please tell how to use these command ??

okay
download this
https://dl.google.com/dl/android/aosp/occam-jdq39-factory-345dc199.tgz
Am guessing you know how to extract stuff? If not don't worry install this
http://www.softpedia.com/get/Compression-tools/Universal-Extractor.shtml
right click on the file you've downloaded, and click extract with uniextract and wait till it's finished.
After that go into the folder thats just been extracted. A file there will be called flash-all.bat. Double click on it, and then put your phone into bootloader mode, if you don't know how to do that, turn it off. hold both the volume buttons down and press the power till it turns on, then let go off the power button, you should get to a start screen, then it'll start flashing, don't touch your phone.

Spend a few hours reading up on what you are doing before you brick your device and are not able to return it.

i actually used to flash stuff in galaxy note and used to download mode used in that to flash stock , i dont know how to use commands
i already tried flashing the stock image but the toolkit said that the md5 checksum dont match ...........
one thing when i click the link i download tgz file and browser starts downloading it but i wanted to download using internet download manger so i copied the link location but it downloaded the tar file ............. is thier a difference

no. well its arguable but really no.

so i have the tar file with me now .........NEXT ??
i used the toolkit already so i have drivers already installed ?
what to do next

double click on the flash-all.bat

hbksabhi said:
i actually used to flash stuff in galaxy note and used to download mode used in that to flash stock , i dont know how to use commands
i already tried flashing the stock image but the toolkit said that the md5 checksum dont match ...........
one thing when i click the link i download tgz file and browser starts downloading it but i wanted to download using internet download manger so i copied the link location but it downloaded the tar file ............. is thier a difference
Click to expand...
Click to collapse
I dont recommend using tools, just my opinion, not that we dont appreciate their hard work but its probably better if you learn commands first. What a better time than right now
Follow this guide to get you back to stock, I actually did it this afternoon as I wanted to see if it would help my battery life out of curiosity. It isnt as bad as it looks honest
http://forum.xda-developers.com/showthread.php?t=2010312

connect phone in fastbook or simply ?? before doing that

bro that i read earlier ... but right now its 5 am in my country .......coulnt sleep all night now having headaches but still ann a correct my phone

have you got an instant messenger?
how to get into fastboot mode
turn it off. hold both the volume buttons down and press the power till it turns on, then let go off the power button, you should get to a start screen, then it'll start flashing, don't touch your phone.

Jesus.. Toolkits, the "noob excuse", guilt trips, and hand holding requests. If you arent sure what you are doing you should have never done it. There is a library worth of tutorials if you just take the time to actually look, read and learn something.
Sent from my Nexus 10 using Tapatalk HD

lol I can actually call myself lucky for flashing a ROM & kernel on my Nexus 7 without reading anything but the threads they're from. Haha.
Good luck on that, maybe you can try downloading Skype so you two could get in touch.
Sent from my Nexus 7 using xda app-developers app

double clicking on flash.bat opens command prompt saying it does not recognise internal or external command

extract the contents of this to were the flash-all.bat is
https://dl.dropboxusercontent.com/u/96452522/Desktop.rar

m4r0v3r said:
extract the contents of this to were the flash-all.bat is
https://dl.dropboxusercontent.com/u/96452522/Desktop.rar
Click to expand...
Click to collapse
i actually googled and enalbed fastbood and adb on my pc
and now double clicking worked
it says press any key to exit
next ??

has your device flashed itself clean then?

finally working ........thanku so much guys <3
specially m4rover
thank you so much ..........
but why wasnt this working with toolkit ??

[Q] Verizon G2 Bricked Without Recovery, Stuck in Fastboot Mode?

Hey guys,
The inevitable has happened: I've finally bricked a device that I can't seem to find the solution to online. Here's what happened:
1. When I got the phone a little over a week ago, I accidentally "broke" the recovery by trying to install CWM through Rom Manager. Turns out that's not something you generally want to do. Oops.
2. I got lazy and put off restoring the stock recovery, instead choosing to deal with the stock launcher.
3. Today, while dealing with the 50th pop-up for the OTA update, I accidentally pressed "Install Now" instead of "Install Later"
Now, when it boots, it briefly shows the LG logo before displaying an all-black screen with small white text reading:
[730] Fastboot mode started
[780] udc_start()
I get a little bit more text when I plug it into my PC. I've been trying to fix it for the past three hours - I've tried countless solutions, but nothing seems to work.
Can anyone out there give me some advice? I'd greatly appreciate it.

Have you tried to use the lg flash tool?

tbishop91 said:
Have you tried to use the lg flash tool?
Click to expand...
Click to collapse
When I opened the Flash tool, it prompted me for a Username and Password, something I didn't have.

techee44 said:
When I opened the Flash tool, it prompted me for a Username and Password, something I didn't have.
Click to expand...
Click to collapse
there's a dll you have to download an replace the one that was installed, it should be on that same thread, but it takes away the username and password

datechnerd said:
there's a dll you have to download an replace the one that was installed, it should be on that same thread, but it takes away the username and password
Click to expand...
Click to collapse
Will this work even though I don't have a recovery? The instructions I found (these: http://forum.xda-developers.com/showthread.php?t=2448960 ) definitely sound as though they were created with a working phone, and some of the instructions linked still imply they have TWRP.
Thanks for any help, I really appreciate it. I feel like I can get this working, it's just going to take some time (something I don't have a lot of, as I'll be camping all weekend).

techee44 said:
Will this work even though I don't have a recovery? The instructions I found (these: http://forum.xda-developers.com/showthread.php?t=2448960 ) definitely sound as though they were created with a working phone, and some of the instructions linked still imply they have TWRP.
Thanks for any help, I really appreciate it. I feel like I can get this working, it's just going to take some time (something I don't have a lot of, as I'll be camping all weekend).
Click to expand...
Click to collapse
yes...

antawnm26 said:
yes...
Click to expand...
Click to collapse
Lol such a simple answer.
Alright I'm trying it. Will report back with results in case I need more help. Thanks everyone

techee44 said:
Lol such a simple answer.
Alright I'm trying it. Will report back with results in case I need more help. Thanks everyone
Click to expand...
Click to collapse
Lol.. Make sure you get that dll that was mentioned earlier because that's your crack to make the tool work.. If you get a fail but your phone boots up and go through settings don't worry about it it's good.. I know a lot of people were having the fail reset error
Sent from my LG-D802 using Tapatalk

antawnm26 said:
Lol.. Make sure you get that dll that was mentioned earlier because that's your crack to make the tool work.. If you get a fail but your phone boots up and go through settings don't worry about it it's good.. I know a lot of people were having the fail reset error
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
So... I followed the guide I posted earlier. It talks about entering download mode, which I'm not able to do, and my phone isn't seen in Device Manager as "LGE AndroidNet for VZW..." (Oddly, it's seen as a "SAMSUNG Android Phone," and under that is "USB Modem Phone ADB port").
When I unplugged and replugged the phone back in, trying to enter download mode even though I haven't been successful with that, nothing happened. LG Flash says it's ready, but nothing activated.
Help??

When it says it's ready unplug it while in download mode and plug it back in.. Make sure you have the ports set right
Sent from my LG-D802 using Tapatalk

antawnm26 said:
When it says it's ready unplug it while in download mode and plug it back in.. Make sure you have the ports set right
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
But I can't enter download mode. If I power off the phone it just brings me straight back to Fastboot.

techee44 said:
But I can't enter download mode. If I power off the phone it just brings me straight back to Fastboot.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2524482

antawnm26 said:
http://forum.xda-developers.com/showthread.php?t=2524482
Click to expand...
Click to collapse
After 6+ hours of work, I finally have my phone up and running again. Thank you so, so much antawnm. You're awesome for helping me through this. Though that link provided wasn't perfect (it was for the Korean model) it provided me with enough clues to combine it with everything else you sent me and some files I found in a directory (especially the recovery.img file for the VZW LG G2) to get back right to where I was.
The funniest part was, after the phone rebooted itself and I got back to my home screen, the phone informed me that my software update was unsuccessful. I genuinely laughed.
Thanks again.

[STOCK][ODIN][TARs][3/17/15]Latest - N910PVPU1BOB7 Stock TAR

UPDATED 3/17/15 - Added OB7 tar
I didn't see a decent link to the stock NIE/NK2/OB7 tar that wasn't on rapidgator or similar crappy site, so I uploaded it to AFH.
Required Files
N910PVPU1BOB7 tar - https://www.androidfilehost.com/?fid=95916177934542777
Samsung USB Drivers - https://www.androidfilehost.com/?fid=95784891001612594
Odin - https://www.androidfilehost.com/?fid=95784891001612591
How to Flash
Install Samsung USB Drivers (if you haven't already)
Unzip N910PVPU1BOB7_N910PSPT1BOB7_SPR.zip, you'll have a file called N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5
Unzip Odin-v3.07.zip
Right-click on Odin3-v3.07.exe > Run as Administrator
Reboot your phone into Download mode - Power off, then press and hold Power + Home + Volume Down. Press Volume Up when you see the warning screen
Click on the PDA button and pick the N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5 file, wait until Odin says that the MD5 was checked successfully
Click Start
Once finished, you'll be back to stock. This WILL NOT reset the KNOX Warranty flag if you've rooted, it will only put you back to the stock ROM/recovery/firmware. Enjoy

Old TARs
N910PVPU1ANK2 tar - https://www.androidfilehost.com/?fid=95853297432265112
N910PVPU1ANIE tar - https://www.androidfilehost.com/?fid=95784891001612590

Thanks for this my man

Thank you sir.

This will come in handy so many times to so many people out here. Thanks.

I've been looking for a decent mirror forever. Thanks!

darshiki said:
I've been looking for a decent mirror forever. Thanks!
Click to expand...
Click to collapse
I'm a bit hurt, what was wrong with mine?

Thank you Sir

shabbypenguin said:
I'm a bit hurt, what was wrong with mine?
Click to expand...
Click to collapse
Oops, sorry shabby! If you had one, I didn't see it. You didn't have a thread for it, right? Cause I looked and didn't see one.

There's a few already, in general where these threads belong. Moving this there.

-viperboy- said:
Oops, sorry shabby! If you had one, I didn't see it. You didn't have a thread for it, right? Cause I looked and didn't see one.
Click to expand...
Click to collapse
Oh i didnt have a thread for it, just mentioned a few times through various other threads that talked about getting the stock tar.

Will this wipe me to a clean slate

leandrae400 said:
Will this wipe me to a clean slate
Click to expand...
Click to collapse
Yes it will give you a fresh clean roms it but everything back to stock no root... But if u are rooted and do this it still doesn't zero out your Knox being tripped if u did root ur phone my on the thanks I hit the wrong button
Sent from my SM-N910P using Tapatalk

shabbypenguin said:
Oh i didnt have a thread for it, just mentioned a few times through various other threads that talked about getting the stock tar.
Click to expand...
Click to collapse
Ah, the good old days of the T-Mobile CF-Auto-Root It feels like so long ago...lol.

Is this supposed to format the phone. I flashed and everything went great however it did not format the phone. Is left all the information in prior rom
---------- Post added at 02:51 AM ---------- Previous post was at 02:36 AM ----------
I only ask cuz i got a force close on set up. Even after i did a master clear

-viperboy- said:
I didn't see a decent link to the stock NIE tar that wasn't on rapidgator or similar crappy site, so I uploaded it to AFH.
Required Files
N910PVPU1ANIE tar - https://www.androidfilehost.com/?fid=95784891001612590
Samsung USB Drivers - https://www.androidfilehost.com/?fid=95784891001612594
Odin - https://www.androidfilehost.com/?fid=95784891001612591
How to Flash
Install Samsung USB Drivers (if you haven't already)
Unzip N910PVPU1ANIE_N910PSPT1ANIE_SPR.zip, you'll have a file called N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5
Unzip Odin-v3.07.zip
Right-click on Odin3-v3.07.exe > Run as Administrator
Reboot your phone into Download mode - Power off, then press and hold Power + Home + Volume Down. Press Volume Up when you see the warning screen
Click on the PDA button and pick the N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5 file, wait until Odin says that the MD5 was checked successfully
Click Start
Once finished, you'll be back to stock. This WILL NOT reset the KNOX Warranty flag if you've rooted, it will only put you back to the stock ROM/recovery/firmware. Enjoy
Click to expand...
Click to collapse
Is this supposed to format the phone. I flashed and everything went great however it did not format the phone. Is left all the information in prior

Nope u have wipe everything manually this just gets u back to true stock form
Sent from my SM-N910P using Tapatalk

sliverr7x said:
Nope u have wipe everything manually this just gets u back to true stock form
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Thanks for the info. Do youbthink this isnthe reason i get a foreclose on mobile service everytime and sprint zone shows on the notification screen frozen at 97%. I have to forceclose the app to get it to go alway

rcmartin57 said:
Thanks for the info. Do youbthink this isnthe reason i get a foreclose on mobile service everytime and sprint zone shows on the notification screen frozen at 97%. I have to forceclose the app to get it to go alway
Click to expand...
Click to collapse
This happens on a brand spanking new Sprint note 4 right out of the box. I know this because when me and my wife got our new phones at a corporate Sprint store the sprint installer "stopped working" on first boot when they were activating our phones and turning them on for the first time. This is caused by the way they have these installer/preload apk's in the rom and the fact that the installer has to contact the network and actually download files during setup. This is NOTHING to worry about. Simply reboot your phone a second time and the sprint configuration installer will initialize and do it's thing. This is jst a little quirk but I've seen on on stock unrooted phones and rooted phones exactly the same.

tx_dbs_tx said:
This happens on a brand spanking new Sprint note 4 right out of the box. I know this because when me and my wife got our new phones at a corporate Sprint store the sprint installer "stopped working" on first boot when they were activating our phones and turning them on for the first time. This is caused by the way they have these installer/preload apk's in the rom and the fact that the installer has to contact the network and actually download files during setup. This is NOTHING to worry about. Simply reboot your phone a second time and the sprint configuration installer will initialize and do it's thing. This is jst a little quirk but I've seen on on stock unrooted phones and rooted phones exactly the same.
Click to expand...
Click to collapse
Thanks forbyhe insight. Knowing this i flashed this rom and everything is running smoothly