Database Users

[Q] Pretty sure I didnt brick my phone, but not sure what to do

Sooooo, I may have bricked it. Any help would be appreciated.
So I got my new sd card and figured i would go ahead and partition for future use, if needed for apps2sd, or any other reason. Instead of going through adb I thought I would save myself some time and just do it from Rom Manager.
Now most of you probably already know what happened. Being as the storage on our devices is called "sdcard" I am humbly assuming that it thought I wanted to partition THAT.
Phone wont boot. Tried factory reset, but no surprise there, it did not work. Can get into download mode and reset menu.
Do I need to flash the factory pda, phone and boot files? Will that work? Where can I get it (preferably without the bloatware and root?????)? Do I need a specific version of odin or will the same one i used for my behold 2 be ok?
Sorry if any of this is stupid, I read these forums cause I want to learn as much as possible about my phone, but have limited experience messing with it. Might try Eugene's froyo just for kicks before I go back to factory. But is this the correct route, or should i just get a replacement?
**** update to issue in post 5

Here look at this: http://forum.xda-developers.com/showthread.php?t=743875

ElahC said:
Here look at this: http://forum.xda-developers.com/showthread.php?t=743875
Click to expand...
Click to collapse
Thanks, makes sense. Download mode does not appear to be working now though, think i got into on accident trying to get to recovery mode.
Is it vol down plus power?

How do you know if you are in download mode? Once when i was in what i thought was download mode it said please wait downloading or something, big yellow characters, and when i hit menu in recovery mode it sent me to a screen with a little mailbox and an arrow coming out of it pointing to a little green android.
Which is dl mode?

ok, i got it into dl mode and when i flashed back to stock it still had a blank screen, like the post above says. But then when I tried to flash Eugene's froyo rom it froze on cach.rfs in odin and the screen on the phone went black. So after about an hour i pulled the plug and tried again, same thing, now when i go to flash back to stock, like previously, it does the same thing, freezing when odin gets to cache.rfs
Also the cell phone goes to a screen that has a cell phone and a computer and the link is broken by an exclamation point. cannot get into recovery mode from there but can get back to download mode.
Any help with all of this?

People have been saying that it could be a problem with your Operating System. Mines is Windows 7 64 - bit and when I use Odin it worked but I have experienced what you have; Odin getting stuck on cache.rfs. You can try on a Windows XP based computer to see if you have any success in that. Also you can possibly be using the wrong Odin. Try the Odin from either : http://forum.xda-developers.com/showthread.php?t=734475 , or : http://forum.xda-developers.com/showthread.php?t=740558 . When I was using Odin it would get stuck on cache.rfs but I tried a different Odin and it worked fine again. Really hope this helps and sorry for the late response.

cache.fs problem in odin
ElahC said:
People have been saying that it could be a problem with your Operating System. Mines is Windows 7 64 - bit and when I use Odin it worked but I have experienced what you have; Odin getting stuck on cache.rfs. You can try on a Windows XP based computer to see if you have any success in that. Also you can possibly be using the wrong Odin. Try the Odin from either : http://forum.xda-developers.com/showthread.php?t=734475 , or : http://forum.xda-developers.com/showthread.php?t=740558 . When I was using Odin it would get stuck on cache.rfs but I tried a different Odin and it worked fine again. Really hope this helps and sorry for the late response.
Click to expand...
Click to collapse
I FOUND A SOLUTION TO THE CACHE.RFS PROBLEM!!
http://www.fractionalphones.com/?p=121

Black Screen Vibrant

Okay, I know there is many post about this, but none seem to answer my question or help me. I have a Vibrant and I've been searching this site along with google to help fix my phone.
I brought it off a friend so warranty won't happen since T-Mobile is being asses. My phone is suck on the black screen after it passes the big S logo. It stays black, and I get 4 lights bright on the buttons. I've reflashed my phone with Odin and it has not worked. I think it correctly as well. Com3 was on, ran the stock Vibrant with Pitt and Tar with PDA one. That had only got my phone off the complete brick that my phone had gone through, when It wouldn't even turn on.
I got the brick off and now I'm stuck with this program. I did have a one click root fix and I was trying to mess around with clock work. To help answer some questions. No, I can not boot into recovery mode. Yes I have cleaned and wipe out cache. Yes I can go into Download mode, but its pointless since odin doesn't do much for me. No I can not go into the phone since the black screen is there and no I can not flash a update file for some reason.
Saying that, I would be grateful for some help and before hand I thank anyone who comes across this even if they don't help, just for taking time to read this and maybe referring someone else to help me or even pointing me in the right direction. Thanks and once again PLZZZZZZZ HELPPPPPPPPPPPPPPPP.

No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?

zephiK said:
No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?
Click to expand...
Click to collapse
Okay. One thing I notice when I try to put my phone into the Android system recovery it says this "
-- Movi_check start .. !!
checksum confirmation need _checksum [1301305579]
MBR _Chksum in header :4.1
MBR checksum : EC0063A432AFDBA2B104C3F0DF52FE3D
MBR Checksum Error
Movinand Checksun Confirmaton Fail
-- movi_checking done!...
# MANUAL MODE #
-- Appling Muti - CSC ...
Installing Muti - CSC "
Another thing, I hit reinstall packages and It says "
-- install from sdcard...
finding update package ...
opening update package ...
E: cant open /sdcard/update.zip
(no such file or directory)
installation aborted.
the drivers I use are the samsung Vibrant drivers for windows 7 64. I know it works because the phone before didn't come up when I didn't use the driver. It always failed and when I install it, than it read my phone. When I connect the phone to the computer, the phone does read it and on odin, it says com 3 in yellow. I than Install pitt and install tar.
The tread you sent me too, I actually went through there before. Both of those drivers didn't work but I found one for windows 7 and it started working for my computer. I could tell it works because the computer actually reads the phone and so does odin. Like I use odin right because it goes through the phone and than says pass at the end. so like WTF lol. I'm pretty sure I'm doing it right tho
Another thing. I used odin a few seconds ago, got the phone to run and it went through the green bar and a blue screen now saying reset came up. My phone than went into androids recovery mode but it started to wipe out data. When doing so, the data said wipe fail. It booted up and now back to the start. Black screen, 4 panels on the bottom lit up and nothing to do.
I'm starting to think it has to do with clockwork I did a partition in it and every since than my phone has been doing this blackscreen with 4 lights.

ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work

same thing here, know idea, odin says everything passed but still the black screen and four buttons. i also noticed that the sound and tmo splash screen are not in sync. no idea ???? help would be great!!!!!!!!!!! same errors though. also from the partion feature in clockworkmod.

i assume your on windows i don't keep up if there is a working version for mac. Anyway, make sure your update.zip is just named update DO NOT add .zip yourself or the phone for what ever reason sees .zip.zip. I would also go ahead re download your odiin files just to make sure non of them are corrupted for what ever reason.

files all check out good, i can't gain access to the phones sd, i have flashed this thing with every checked build i could find, all with the same result. the master boot record is not adding up.? still have know idea.

have you tried using this.. http://forum.xda-developers.com/showthread.php?t=740558
this work for me and was able to flash to stock..

somebody please help I'm experiencing the same problem as the OP? can somebody point me in the right direction I've been looking for hours

Instead of making us read the entire thread perhaps you could summarize your specific problem.
My initial impression goes like this.
1. Get into download
2. ODIN back to STOCK 2.1
Run odin in admin mode
Use rage against the cage
After getting back to stock Recovery 2e go ahead reroot and flash away
Sent from my SGH-T959 using XDA App

Don't know if this is still an issue, but here's how I fixed it.
http://forum.androidspin.com/showth...yo-That-does-not-Brick!-Downgrading-Is-Fine-)
Downloaded this file knowing it wouldn't work, Had ODIN flash it and got into this weird recovery screen. Just pulled the battery and then flashed back to stock using ODIN.
Helped me out.

Use 512 .pit and True Stock 2.1 from this post
http://forum.xda-developers.com/showthread.php?t=747335
And quit messing with your phone! lol

This is how i fixed mine too, my phone would go through a seemingly normal start up, but the UI would never load and it would stay on a blank screen.
Flash Eugenes373s froyo that doesnt brick. once it brings you to the recovery screen, pull the battery and once again use odin to flash back to stock. the phone should boot up now.

mnm0071980 said:
ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work
Click to expand...
Click to collapse
Hey i just encountered the same exact problem four days ago except i flash with odin it says pass but im still stuck on a black screen after the s logo my problemwas encountered by tryig flash a kernal. Please tell me that u found a solution

Psa\\\\\ important - must read ! ! ! !

Okay,
There is a growing number of us XDA members on the Vibrant platform who have just bricked out phones. Save for other DEV tools, which I have not used, do not have access, and do not know how to use, for all intensive purposes, this phone is Br'iKTed ! ! !
Here are the series of events
1. flashed the latest Bionix
2. Worked great, some bugs, but for the most part without incident.
3. Flashed new DOW Kernel,
4. worked great for 2 days.
5. then on night 2, the phone was stuck on the DOW Green robot screen
6. could not get into Recovery mode (none of the recovery modes)
7. Phone would not boot
8. ODIN back to stock
9. After Vibrant screen, the phone turns off. No soft keys, Nada!
10. Flashed JI5, Ji6, Eugene's Non Bricking Froyo (ODIN Files)
11. Same result, Turned off after Vibrant
and
12. still cant' get into recovery
I am having problems with the phone starting up and loading what I flashed.
I flashed JI5 Ji6, and Eugene's non bricking Froyo Rom
These 3 are the only ones I was able to find that is ODIN flashable
Why you ask?
I cannot get into Recovery, but I can get into Download mode. I can't get into any recovery at all. NOTHING. This is why ODIN seems to be my only option.
But regardless of any ROM i flash, my phone shuts off right after the Vibrant screen. No splash screen, no loading, no booting. .Nothing. It just shuts off.
I can't charge it either.
i get a Charging bootloop. HOurglass - battery shows up for a bit, then restarts over and over.
So in other words. it's ****ed.
Hope that explains it sufficiently. if you have any more questions or suggestions, Im open man, Im open.
Help me
So I'm not sure how DEVs would like to proceed on this.
TW (I've always loved your roms. Been following you since the first BIONIX 1.8)
Morific (If it's the Kernel, i'd like to know about it)
Thanks for reading guys. I wanted to give everybody a heads up.
I don't know what the problem is, but I do know that the phone does not work.
I'd appreciate some suggestions or anything.
And to inform the community that this problem is out there. I hope there aren't any more bricked phones.
Cheers,

have you tried using odin with the repartition checked

Yes I have.
Tried it with/ Without. Using Just the Tar file, using just the base file. I've tried it all.
Thanks

a4 moda said:
Yes I have.
Tried it with/ Without. Using Just the Tar file, using just the base file. I've tried it all.
Thanks
Click to expand...
Click to collapse
have you tried to odin to ka6 or ka7? something with a bootloader

not to be that guy, but how does this pertain to development? This sounds to me like an individual case of something going wrong and not an overarching issue with current available software. Just in case I am wrong I am flashing Bionix, and the DOW kernel myself to see if I end up with the same issue. My suggestion is flash back to stock, and exchange your device for a new one from T-Mobile.

I totally understand what your going through. I'm having the exact same problem, the DOW kernel flashed ok but then it didn't want to come off and it totally has my phone stuck on that damn green robot screen.

I soft-bricked my phone once by pulling USB cable immediately after ODIN forced my phone to reboot after flashing. It was the first time I ever ODIN'ed my phone, and thought the reboot (ODIN calls it reset) was the final step of flashing, and unplugged the USB cable. Anyway the phone did not initiate final step of the installation of JFD image, and went into boot loop. You can't imagine how freaked I was. It wouldn't go into recovery mode even if I pressed volume up, down and power combo, because it didn't stop rebooting right after the Vibrant logo. I am not sure if bootloader was not installed correctly, though. But I kept the phone rebooting for a while to see what happens. No luck. Eventually, I followed someone's instruction, and pulled my battery out, plugged USB to my laptop and to my phone, started ODIN, and popped in the battery. The phone immediately restarted into download mode, and I was able to flash the phone again.
My experience may not help you as it appears that you are able to flash ODIN-flashables, at least. But I hope this helps someone who's experiencing similar issues. And I would try downloading a JFD image and verifying MD5 before flashing. It could be bad downloads of the image files.

Try to go to eugenes forum and he has a file to download...it is his unofficial jk2 froyo rom. Don't use the old "froyo that does not brick" Try to flash that in ODIN. I just used it tonight when I got stuck in stock recovery with a MBR Check sum failure. That should get u back to where u can fix ur phone. Also I don't click the repartition button in ODIN just causes problems for me. If u need anything feel free to P.M. me.
Sent from my SGH-T959 using Tapatalk

STiGLOGiC said:
not to be that guy, but how does this pertain to development? This sounds to me like an individual case of something going wrong and not an overarching issue with current available software. Just in case I am wrong I am flashing Bionix, and the DOW kernel myself to see if I end up with the same issue. My suggestion is flash back to stock, and exchange your device for a new one from T-Mobile.
Click to expand...
Click to collapse
Completely reasonable. This pertains to development because if there is an endemic problem with one of our ROMS or KERNELS (not pointing fingers, just pointing out the possibilities that I know of, there could be more), people in our community need to know. Hence, I titled it "PUBLIC SERVICE ANNOUNCEMENT"
Thanks. I hear you about Tmobile. I'd rather not have to dump my problem on Tmobile if I can fix it, because I flashed the rom. Despite the fact that Tmobile JFS leaves something to be desired, they did deliver me a working phone. So i'd like to exhaust all possibilities before calling it quits.
hackman17 said:
I totally understand what your going through. I'm having the exact same problem, the DOW kernel flashed ok but then it didn't want to come off and it totally has my phone stuck on that damn green robot screen.
Click to expand...
Click to collapse
Exactly.
jaetm83 said:
I soft-bricked my phone once by pulling USB cable immediately after ODIN forced my phone to reboot after flashing. It was the first time I ever ODIN'ed my phone, and thought the reboot (ODIN calls it reset) was the final step of flashing, and unplugged the USB cable. Anyway the phone did not initiate final step of the installation of JFD image, and went into boot loop. You can't imagine how freaked I was. It wouldn't go into recovery mode even if I pressed volume up, down and power combo, because it didn't stop rebooting right after the Vibrant logo. I am not sure if bootloader was not installed correctly, though. But I kept the phone rebooting for a while to see what happens. No luck. Eventually, I followed someone's instruction, and pulled my battery out, plugged USB to my laptop and to my phone, started ODIN, and popped in the battery. The phone immediately restarted into download mode, and I was able to flash the phone again.
My experience may not help you as it appears that you are able to flash ODIN-flashables, at least. But I hope this helps someone who's experiencing similar issues. And I would try downloading a JFD image and verifying MD5 before flashing. It could be bad downloads of the image files.
Click to expand...
Click to collapse
Thanks for the heads up. I've gone through this myself many times. And i'm sure your post will help others out there. My problem (as well as many others on here with the same ROM and KERNEL I used) seems to be different and unique. Something that ODIN won't cure.
vibrant2010 said:
Try to go to eugenes forum and he has a file to download...it is his unofficial jk2 froyo rom. Don't use the old "froyo that does not brick" Try to flash that in ODIN. I just used it tonight when I got stuck in stock recovery with a MBR Check sum failure. That should get u back to where u can fix ur phone. Also I don't click the repartition button in ODIN just causes problems for me. If u need anything feel free to P.M. me.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Yes, tried that too. Same result. Vibrant.. then shut off.
Thanks anyway.

I had actually just had Bionix-v 1.2.1 and the new DoW combo to try out Voodoo Sound. I really loved the sound quality, but battery drain was not adequate as being my daily driver, even though I set it to run at 1ghz and used a sleep profile. After just over 2 days of use, I backed out by ODIN'ing to JFD and I installed Bionix-v 1.2.1 again. Only thing I have noticed so far is GPS not initiating immediately after it's turned on. I would go into GPS Test app, and turn on GPS after the app is started, but I get no satellites for at least 1 min. I used to get a lock within seconds, not minutes. I will try ODIN again tomorrow and see if it fixes. I guess I was lucky enough not to get a bootloop again though.
But I can't see why you and I would have any issues after the Bionix+Dow combo. Wouldn't ODIN just clear everything up? I even repartitioned when flashing, so my guess is that my system, data, datadata, etc., are all reformatted completely? Am I missing something?

I had the same problem. I flashed DoW and then the next day my phone didn't want to turn on. I pulled the battery and restarted it. It didn't want to start up all the way. It got to the vibrant screen and shut off. luckily for me, my replacement phone that I ordered a week ago came in the same day. I sent off my old phone letting samsung/tmo take care of it.

This exact same thing happened to me.
I too had the phoen bricked after flashing the DOW after Bionix 1.2.1
I have been flashing since the G1. This is the first time I've ever bricked a phone.
Hoping to get it fixed this weekend

Yo OP
Coming from a very scary brick my self, (phone wouldnt even turn on, bad dead horse test).
When your using Odin, are you using v1.7, are you using the correct stock JFD tar, when you repartion, are you using the correct pit file. Sounds to me that your partions are screwed, so try the pit approach first. If you phone wont boot at all after this, with odin open go into download mode by holding the vol rockers only, and plug USB in.
Then flash JFD.

black spirit said:
Yo OP
Coming from a very scary brick my self, (phone wouldnt even turn on, bad dead horse test).
When your using Odin, are you using v1.7, are you using the correct stock JFD tar, when you repartion, are you using the correct pit file. Sounds to me that your partions are screwed, so try the pit approach first. If you phone wont boot at all after this, with odin open go into download mode by holding the vol rockers only, and plug USB in.
Then flash JFD.
Click to expand...
Click to collapse
I spent over 12 hours working on this when it happened to me yesterday. Tried every tar and pit file and all versions of Odin I could find. There is no way to fix it with Odin. It is BRICKED!

If you have not already done this, I recommend doing this: http://forum.xda-developers.com/showthread.php?t=954509
Bay Wolf made a nice software for the computer that pretty much shows you a step-by-step instruction on how to flash to stock, reroot, and flash the new ROM of your choice. This program will push you into download mode, clockwork recovery, etc. There is a video on that link that will also show you a step-by-step instruction. Try that out if you haven't, and let us know how it goes.
That program comes with a PIT and TAR file for you to use as well.

Even if you say it is, this is not a Development thread and belongs in one of the other forums. I understand your frustration, however TW did not flash your phone, you did. Coming on here with a "PSA" that their ROM or Kernel loaded itself on your phone and broke it is not the way it should be done. Did you, before posting this, go to the TW irc for help or pm Sombionix or any other TW Dev?
Since you can Odin, Odin to stock 2.1 then connect to KIES mini while in download mode, if you can, and take the OTA.

drewdude007 said:
I spent over 12 hours working on this when it happened to me yesterday. Tried every tar and pit file and all versions of Odin I could find. There is no way to fix it with Odin. It is BRICKED!
Click to expand...
Click to collapse
I thought the same when it happen to me.
Nothing would work, but went that approach and happy days.
s1_odin_20100512.pit
and
T959UVJFD.tar
are the only ones you need, and if your good with your flashing, just do a pit first, no pda.
And if your still getting to download mode, ect, and dont have the computer /!\ phone icon on the screen, sounds like a soft brick.

jellette said:
Even if you say it is, this is not a Development thread and belongs in one of the other forums. I understand your frustration, however TW did not flash your phone, you did. Coming on here with a "PSA" that their ROM or Kernel loaded itself on your phone and broke it is not the way it should be done. Did you, before posting this, go to the TW irc for help or pm Sombionix or any other TW Dev?
Since you can Odin, Odin to stock 2.1 then connect to KIES mini while in download mode, if you can, and take the OTA.
Click to expand...
Click to collapse
I see where you're going, but he did not blame TW or anyone else. He may just be warning some people/asking for help. I do however agree that he posted in the wrong section.
Also, why would he need to pm sombionix or a TW dev before posting this?

SamVib said:
I see where you're going, but he did not blame TW or anyone else. He may just be warning some people/asking for help. I do however agree that he posted in the wrong section.
Also, why would he need to pm sombionix or a TW dev before posting this?
Click to expand...
Click to collapse
Because he started off with his problem stated as:
1. flashed the latest Bionix
2. Worked great, some bugs, but for the most part without incident.
3. Flashed new DOW Kernel,

Your phone probably IS charging.
Your /efs nodes may be messed up. Do you have a backup of your /efs?
Try reading here: http://forum.xda-developers.com/showthread.php?t=859914

[Q] Can't get into Download Mode after Odin Flash

First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.

mountainmanscg said:
First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
Click to expand...
Click to collapse
Try pulling your battery and holding down the power button for a slow count of 20 to see if download mode comes back. After that, you should be good to flash stock ec07 and then recovery kernel. After that, whichever rom you choose. If that doesn't work, I'll try to get into IRC at some point tomorrow (today).

That didn't work either - screen is still blank & it won't progress in Odin. I'll jump back into IRC if anyone has any other ideas - thanks.

i dont know what to tell you continuums are very hard to brick and if u cant get into download mode then theres not that much u can do im afraid I was talking to adam outler about trying the unbrickable mod on a continuum but he does not have one to test. now he got the fascinate to work so id pm him and see if he'll let you send your phone to him

Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...

mountainmanscg said:
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
Click to expand...
Click to collapse
I'll be in irc in a few if ya wanna give it another shot

I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.

PapaKaster said:
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
Click to expand...
Click to collapse
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.

Txwolf1980 said:
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Click to expand...
Click to collapse
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.

PapaKaster said:
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
Click to expand...
Click to collapse
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?

Txwolf1980 said:
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Click to expand...
Click to collapse
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.

PapaKaster said:
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
Click to expand...
Click to collapse
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.

Txwolf1980 said:
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Click to expand...
Click to collapse
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.

PapaKaster said:
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
Click to expand...
Click to collapse
Its all good. Try the suggestions I gave you, when you have time. If they don't work, I'll have some down time tomorrow or sunday. Just let me know, and we'll see if we can make the schedules match

[Q] AT&T S4 wont turn on. Only vibrates.

Ohh, where to start. Ok so first off let me apologize in advance if this has already
been posted but I’m a noob when it comes top posting in the forums. Been using
them for years to fix my problems just new to posting. Anyway, a few nights ago I
tried to flash the newest version of the T-Mobile AOKP rom (Kit Kat 4.2.2) onto my
AT&T I337 Samsung Galaxy S4 via the latest version of TWRP recovery. After
attempting to flash AOKP, TWRP failed the flash and had an error message that said
something about the phone not being able to flash a T-Mobile rom on an AT&T
phone. I then tried to flash the AOKP rom again and mistakenly flashed the Loki
kernel instead. I was currently running Cyanogenmod 11. After the Loki kernel
attempted to flash, it once again said failed and gave me a message that said
something about me losing root and asking if I wanted to reinstall superuser. I
agreed to reinstall superuser and used the option to reboot my phone once it was
complete. But….once the phone attempted to reboot my screen went black and all
my phone would do is vibrate every two to three seconds with a blank screen. I
pulled the battery, tried to put it in recovery mode, and download mode but nothing
worked at all. It wouldn’t charge, no battery icon, no LED. After messing with it for a
few hours and randomly pushing buttons I finally got it to go into download mode. I
was so happy. I decided I would flash (Odin) a stock firmware that I had already had
and used plenty of times. But…after flashing Odin would say complete and pass but
when my phone would reboot it done the same thing as before. Black screen and
vibrates every two to three seconds wont charge, no battery icon, no LED, still won’t
go into recovery mode but will still go into download mode. I’ve used every version
of Odin, used different USB ports, different USB cords, reflashed the stock at least
20 times now and still nothing. What have I done and how could I fix this issue. :crying:
Ohhh and before I forget, It may be worth mentioning that when I finally got it in
download mode I noticed it said that I had the stock Samsung firmware, where it
usually says custom when rooted.

I'm assuming you're on MDL firmware. If so Odin flash the stock firmware. You can get it at sammobile.com
You're probably hosed though, sounds like you've tried all this.

Doesn't work
jd1639 said:
I'm assuming you're on MDL firmware. If so Odin flash the stock firmware. You can get it at sammobile.com
Click to expand...
Click to collapse
Like i said in the post. Odin didnt work. It will say pass every time but doesnt fix anything. Screen still stays black and just vibrates every two to three seconds and still cant access recovery mode.

signature
lukethaduke88 said:
Like i said in the post. Odin didnt work. It will say pass every time but doesnt fix anything. Screen still stays black and just vibrates every two to three seconds and still cant access recovery mode.
Click to expand...
Click to collapse
just try whats in my signature

lukethaduke88 said:
Like i said in the post. Odin didnt work. It will say pass every time but doesnt fix anything. Screen still stays black and just vibrates every two to three seconds and still cant access recovery mode.
Click to expand...
Click to collapse
so my gs4 does the same thing how did you fix it ?

juggalo1978 said:
so my gs4 does the same thing how did you fix it ?
Click to expand...
Click to collapse
First observation: nothing here says that he fixed it. If he did, which may not have happened, then he obviously didn't tell us.
I wonder if you really have the same issue. Did you read through the OP? Did your phone get where it is by doing the exact same sequence that he did? If not, and you want someone to help, you will need to give a detailed description of everything that led up to the issue you have, from the time the phone was operating normally. It would also be helpful to know what your phone was running before this happened.

creepyncrawly said:
First observation: nothing here says that he fixed it. If he did, which may not have happened, then he obviously didn't tell us.
I wonder if you really have the same issue. Did you read through the OP? Did your phone get where it is by doing the exact same sequence that he did? If not, and you want someone to help, you will need to give a detailed description of everything that led up to the issue you have, from the time the phone was operating normally. It would also be helpful to know what your phone was running before this happened.
Click to expand...
Click to collapse
I have an i337 and i flashed the AOSP Kt kernel like june or before intern it rebooted and was stock on boot black screen and vibrating trying to turn on or or recovery does the same thing i can get in dl mode and odin says pass nothing stays the same kies wont read it and it dont come up in device manger it is on ether the mdb boot loader or mdl it was running liquid smooth it never got to stock recovery because when it would not boot i tried odin
3.2 ive seem some where it can be fixed with an sd card but i need the debrick image if anyone could help id appreciate it thank you
---------- Post added at 02:17 AM ---------- Previous post was at 01:58 AM ----------
creepyncrawly said:
First observation: nothing here says that he fixed it. If he did, which may not have happened, then he obviously didn't tell us.
I wonder if you really have the same issue. Did you read through the OP? Did your phone get where it is by doing the exact same sequence that he did? If not, and you want someone to help, you will need to give a detailed description of everything that led up to the issue you have, from the time the phone was operating normally. It would also be helpful to know what your phone was running before this happened.
Click to expand...
Click to collapse
I have an i337 and i flashed the AOSP Kt kernel intern it rebooted and was stock on boot black screen and vibrating trying to turn on or or recovery does the same thing i can get in dl mode and odin says pass nothing stays the same kies wont read it and it dont come up in device manger it is on ether the mdb boot loader or mdl it was running liquid smooth 3.2 ive seem some where it can be fixed with an sd card but i need the debrick image if anyone could help id appreciate it thank you