Problems with the Uni-wlan - HD2 Android Q&A, Help & Troubleshooting and Genera

Hi guys,
i have a problem with the gingerbread rom. I can only connect to a "normal" wlan. If I try this at the uni-wlan WPA2-Enterprise (i think i spell it correctly) i have to sign in with mschapv2 audentification. I can chose these type of audentifcation but i cant sign in...
so now my question:
Is there any solution to fix it with the gingerbread rom?
Or must i us the Froyo rom.
sry for my bad english

i have the same problem

See this conlusion
http://forum.xda-developers.com/showthread.php?t=923956&highlight=wpa2+enterprise
May be due to not being sense...

Some of the kernals do not support this, I know for a fact that the CM7 builds by charan do support this encryption of wireless networks.
A lot of the kernals never supported this, the MDJ ones I know as I am using it and cannot get on the wireless where I am.

MDJ ROM... Computer says no!
I don't understand. Where do I get the MDJ gingerbread ROM? Is seen in the HD2 NAND BIBLE (http://forum.xda-developers.com/showthread.php?t=929324) under MDJ's CyanogenMod 7 (m-deejay) (http://forum.xda-developers.com/showthread.php?t=877777) but I can not enter as I posted to little on threads...
PS: Oh, and did you say this ROM works with WPA2-Enterprise PEAPv0/EAP-MSCHAPv2?

Solved
This problem was solved in v2.4.1
Changelog:
v2.4.1: Updated to tytung r6 kernel. This fixes IEEE 802.1x/EAP authentication support as well as native tethering.
TyphooN CyanogenMod 7
Click to expand...
Click to collapse
Thank you tyween et al.!

Related

[Q] Frustration !!!

Ok i have had a few versions on Android running now but seem to have the same issue with every one, which is ramdomly loosing data connection although it is showing that it has. My question is has it got anything to do with the WM ROM and Radio etc im Running or is it going to be the Android Build.
I have
ChuckyRom WWE
Radio 2.15.50.14
No android on there at the Mo as I have just formatted the card I did have Mdeejay Evo Sense v.23 Revolution
Can you help ?
TommyHD2 said:
Ok i have had a few versions on Android running now but seem to have the same issue with every one, which is ramdomly loosing data connection although it is showing that it has. My question is has it got anything to do with the WM ROM and Radio etc im Running or is it going to be the Android Build.
I have
ChuckyRom WWE
Radio 2.15.50.14
No android on there at the Mo as I have just formatted the card I did have Mdeejay Evo Sense v.23 Revolution
Can you help ?
Click to expand...
Click to collapse
If you have had all PPP builds (which I suspect you have), these data drops are normal. There are ways to improve stability, look around in the development section and your build thread, or switch to an RMNET build if you really want a stable (but slower) connection. If you're on RMNET already, you'll need someone more advanced to help you but your build's thread would be a good starting point.
Ok cheers, are my ROM and Radio ok as far as you know ?
The ROM and Radio is ok. In the android dev section you'll find this wrapper. Try it out. And I recommend you to use hastarin 8.5 kernel. Seems to improve the connection stability again.
Edit: Hastarin 8.5

[Q] No data/3g/2g with Vodafone NL on Android

Hi,
I have this problem and other users have this problem too. I have Vodafone NL and for some reason I don't have internet on some Android builds. In nearly all MDJ builds it works without a problem, but in the more unknown builds and the new RAM builds it just doesn't work. I usually see the problem too when i update a kernel of a build.
I'm currently using the Revolation 1.2 build, and it doesn't have any problems. But when i try the CMYLXGOs.BlueTopia.HD-Beta3 or one of the RAM builds(want it!), it just doesn't work.
Please help me...
williamsean said:
Hi,
I have this problem and other users have this problem too. I have Vodafone NL and for some reason I don't have internet on some Android builds. In nearly all MDJ builds it works without a problem, but in the more unknown builds and the new RAM builds it just doesn't work. I usually see the problem too when i update a kernel of a build.
I'm currently using the Revolation 1.2 build, and it doesn't have any problems. But when i try the CMYLXGOs.BlueTopia.HD-Beta3 or one of the RAM builds(want it!), it just doesn't work.
Please help me...
Click to expand...
Click to collapse
APN settings get changed with every build. Check/search for Vodafone APN settings and adjust as needed.

is there a wep2/eap solution for mdj cm7

Hi,
I tested some Nand builds and the best i found was -=MDJ's CyanogenMod 7 v. 2.6 [A2SD+][GRH78C][RMNET][Kernel: MDJ S10.4 OC, unfortunately it does not support wpa2 eap network connections, and most of the networks i use use the above mentioned connection method, so i would like to ask is there some fix or patch for that issue. As far as i can see the build thread has been closed so i guess this is the right place for my question.

[Q] InternetPassThrough not work on HD2 Coredroid

I bought a TMOUS HD2 working with Coredroid v1.6 Froyo 2.1 and everything was great except that it restart a lot, so i flashed Coredroid v3.1 GB2.3.3 but i can't access internet with Internet Pass Through, i flashed that ROM as described in subject http://forum.xda-developers.com/showthread.php?t=926507&page=1930
with Costume RUU, and at flashing i did as shown in guide https://docs.google.com/document/d/17TPsZcrDUcbIWtQbKV90GM-lDIByP9OeB6nGYadjfKE/edit?pli=1
anyhelp, please. i don't have wifi nor 3G.
mendl2004 said:
I bought a TMOUS HD2 working with Coredroid v1.6 Froyo 2.1 and everything was great except that it restart a lot, so i flashed Coredroid v3.1 GB2.3.3 but i can't access internet with Internet Pass Through, i flashed that ROM as described in subject http://forum.xda-developers.com/showthread.php?t=926507&page=1930
with Costume RUU, and at flashing i did as shown in guide https://docs.google.com/document/d/17TPsZcrDUcbIWtQbKV90GM-lDIByP9OeB6nGYadjfKE/edit?pli=1
anyhelp, please. i don't have wifi nor 3G.
Click to expand...
Click to collapse
Don't know if this is any help, but saw it on the portal a few days ago...
http://www.xda-developers.com/android/reverse-tethering-keeping-your-android-device-online/
I think it is kinda what you are trying to do. A while ago I tried the CoreDroid rom, and found the same - usb tethering didn't work, although I didn't try too hard to make it work, as I rarely use it.
thanks
thanks, but doesn't support download from market, and even doesn't recognize my HD2.
in ver1.6 it was working but in that ver. the phone was restarting many times so i search for other ROM that support that and stable
reply
i returned to CD v1.7 Froyo 2.2.1 and it works fine, but the version i don't know if i'll face troubles or not, i'll see and i hope not

Need HELP with HD2

Hello all! Most need help with HD2. I loaded via Recovery CLK NexusHD2 4.4, it working ok but a lot of lags and freezes and very slowly work, I think because HD2 have not enough CPU power and capacity of RAM. I loaded NexusHD2 android 2.3 and it great working, very fast and very stable, but bad mistake - not have cellular network. I does try know and it not have IMEI. I loaded android 4.4 again and have IMEI and network working ok. Now loaded 2.3 and again not have IMEI. Please, help me solve this problem, I need working network on HD2 with android 2.3.
flexx-001 said:
Hello all! Most need help with HD2. I loaded via Recovery CLK NexusHD2 4.4, it working ok but a lot of lags and freezes and very slowly work, I think because HD2 have not enough CPU power and capacity of RAM. I loaded NexusHD2 android 2.3 and it great working, very fast and very stable, but bad mistake - not have cellular network. I does try know and it not have IMEI. I loaded android 4.4 again and have IMEI and network working ok. Now loaded 2.3 and again not have IMEI. Please, help me solve this problem, I need working network on HD2 with android 2.3.
Click to expand...
Click to collapse
You mentioned that you're using cLK bootloader. When installing the 2.3 ROM, are you sure you're flashing/selecting the correct connection method? To get data on cLK, you must be using PPP protocol.
If by cellular network, you mean no signal/coverage at all (e.g. you can't even make phone calls), then I'm not sure what the cause is. You may search the ROM's thread, you might be able to find something there.
Marvlesz said:
You mentioned that you're using cLK bootloader. When installing the 2.3 ROM, are you sure you're flashing/selecting the correct connection method? To get data on cLK, you must be using PPP protocol.
If by cellular network, you mean no signal/coverage at all (e.g. you can't even make phone calls), then I'm not sure what the cause is. You may search the ROM's thread, you might be able to find something there.
Click to expand...
Click to collapse
Yes, I use PPP method in installing. But phone haven't IMEI with this rom. On rom with android 4.4 IMEI and network worked. Both rom NexusHD2. Thread of NexusHD2 version 2.3 at this time closed.
Problem solved. I installed other rom - TyphooN CyanogenMod 7 android 2.3 and all work normally.

Resources