is there a wep2/eap solution for mdj cm7 - HD2 Android Q&A, Help & Troubleshooting and Genera

Hi,
I tested some Nand builds and the best i found was -=MDJ's CyanogenMod 7 v. 2.6 [A2SD+][GRH78C][RMNET][Kernel: MDJ S10.4 OC, unfortunately it does not support wpa2 eap network connections, and most of the networks i use use the above mentioned connection method, so i would like to ask is there some fix or patch for that issue. As far as i can see the build thread has been closed so i guess this is the right place for my question.

Related

[Q] Frustration !!!

Ok i have had a few versions on Android running now but seem to have the same issue with every one, which is ramdomly loosing data connection although it is showing that it has. My question is has it got anything to do with the WM ROM and Radio etc im Running or is it going to be the Android Build.
I have
ChuckyRom WWE
Radio 2.15.50.14
No android on there at the Mo as I have just formatted the card I did have Mdeejay Evo Sense v.23 Revolution
Can you help ?
TommyHD2 said:
Ok i have had a few versions on Android running now but seem to have the same issue with every one, which is ramdomly loosing data connection although it is showing that it has. My question is has it got anything to do with the WM ROM and Radio etc im Running or is it going to be the Android Build.
I have
ChuckyRom WWE
Radio 2.15.50.14
No android on there at the Mo as I have just formatted the card I did have Mdeejay Evo Sense v.23 Revolution
Can you help ?
Click to expand...
Click to collapse
If you have had all PPP builds (which I suspect you have), these data drops are normal. There are ways to improve stability, look around in the development section and your build thread, or switch to an RMNET build if you really want a stable (but slower) connection. If you're on RMNET already, you'll need someone more advanced to help you but your build's thread would be a good starting point.
Ok cheers, are my ROM and Radio ok as far as you know ?
The ROM and Radio is ok. In the android dev section you'll find this wrapper. Try it out. And I recommend you to use hastarin 8.5 kernel. Seems to improve the connection stability again.
Edit: Hastarin 8.5

[Q] Navigation on Gingerbread issues

Hi Guys,
Having spent a couple of weeks riding the MDJ Nand Gingerbread rollercoaster and read over 10,000 posts I am still none the wiser on getting navigation working successfully.
I have the MDJ CyanogenMOD7 NAND ROM, 2.15 radio and CWM installed and get a GPS fix and lock.
However as soon as I try and use google Navigation it drops after a few minutes, lags and give poor accuracy and is basically unusable.
I have implemented gauner1986's gps file fix and 777 the files in question, downloaded GPS status and got the A-GPS data but still no improvement.
Some people seem to be reporting no problems but lots more have the same issue.
Can anybody offer something else I might have missed
Thanks
NO GPS Tracking with NAND ROMz HELP
I am having the same issue with GPS. I have used multiple NAND ROMS and Changed GPS.Conf still unable to get SAT lock. Its Sad I Love Android and without GPS I'll have to switch back to WM.. boooo (Besides Poor Battery Life but one thing at a time)
HD2 Tmous with Radio Leo_RADIO_2.15.50.14**
I've used NAND ROMS:
[13 JAN] -=MDJ's CyanogenMod 7 v. 2.3
[11 JAN] NexusHD2-Gingerbread V2.0 NAND
[10 JAN] MDJ FroYo Revolution v.2.3
[30 DEC][DFT]LEO "Stock Desire" NAND Android ROM
Blake001001 said:
I am having the same issue with GPS. I have used multiple NAND ROMS and Changed GPS.Conf still unable to get SAT lock. Its Sad I Love Android and without GPS I'll have to switch back to WM.. boooo (Besides Poor Battery Life but one thing at a time)
HD2 Tmous with Radio Leo_RADIO_2.15.50.14**
I've used NAND ROMS:
[13 JAN] -=MDJ's CyanogenMod 7 v. 2.3
[11 JAN] NexusHD2-Gingerbread V2.0 NAND
[10 JAN] MDJ FroYo Revolution v.2.3
[30 DEC][DFT]LEO "Stock Desire" NAND Android ROM
Click to expand...
Click to collapse
Thanks anyway, I love Android but again need navigation for work.
I was running MDJ [SD] Froyo Revolution V1.7 and it worked fine, so i am thinking it is a Gingerbread issue.
Hopefully one of the smart ones will sort it
Thanks
Blake001001 said:
I am having the same issue with GPS. I have used multiple NAND ROMS and Changed GPS.Conf still unable to get SAT lock. Its Sad I Love Android and without GPS I'll have to switch back to WM.. boooo (Besides Poor Battery Life but one thing at a time)
HD2 Tmous with Radio Leo_RADIO_2.15.50.14**
I've used NAND ROMS:
[13 JAN] -=MDJ's CyanogenMod 7 v. 2.3
[11 JAN] NexusHD2-Gingerbread V2.0 NAND
[10 JAN] MDJ FroYo Revolution v.2.3
[30 DEC][DFT]LEO "Stock Desire" NAND Android ROM
Click to expand...
Click to collapse
Try tis:
Rev.3] Feather Desire HD [Kernel: MDJ 10.2]
http://forum.xda-developers.com/showthread.php?t=903002
i get the gps fix after the first fix in under 3 seconds!!
honki said:
Try tis:
Rev.3] Feather Desire HD [Kernel: MDJ 10.2]
http://forum.xda-developers.com/showthread.php?t=903002
i get the gps fix after the first fix in under 3 seconds!!
Click to expand...
Click to collapse
the fix is not the problem, it's getting further information from the satelittes after the initial fix.
@ waspsl: same problem here, I'm following the MDJ thread from page 600 and something but with over a 100 posts a day I can't follow anymore.
Searched the web but still no resolution. So I think we will have to wait somewhat longer.
PS: if you have a bt gps dongle, you still can use your gps software. everything works fine here with an EXTERNAL BT Donloge

[Q] Question about a Kernel.

Im running MDJ froyo HD 4.6 on my sd card and wonder if i can use MDJ s10.4 kernel?
I´ve seen this kernel at his NAND builts, but has not been sure if it works on this built im using.
Grateful for any response tnx

[Q] MAGLDR112+WP7+Android(on SD previously), wifi does not work, please help!

This Android system is on SD card and running well previously.
After MAGLDR1.12 and WP7 are updated, I start this Android from MAGLDR, then I find that wifi does not work any more. (when I turn on wifi, the notification is "unable to scan for networks")
summit_zhang said:
This Android system is on SD card and running well previously.
After MAGLDR1.12 and WP7 are updated, I start this Android from MAGLDR, then I find that wifi does not work any more. (when I turn on wifi, the notification is "unable to scan for networks")
Click to expand...
Click to collapse
I would suggest you reinstall Android.
BTW What android build are you using?
I have tried several builds.
including
MDJ FroYo HD v.4.6
MDJ Revolution HD v.1.2
MDJ FroYo Sense Revolution v.1.7 [kernel: MDJ S6.1]
Its because those builds are not written to boot from magldr, they are designed for haret.exe.
If you want to boot Android from SD via magldr you need to use a compatible or edited build.
Thank you for your reply.
The build I mentioned above is MDJ FroYo Sense Revolution v.1.7 [kernel: MDJ S6.1]
I have found MIUI 1.1.14 with good wifi, but it has other many bugs.
Is there method that pick up wifi module from MIUI to MDJ?
summit_zhang said:
Thank you for your reply.
The build I mentioned above is MDJ FroYo Sense Revolution v.1.7 [kernel: MDJ S6.1]
I have found MIUI 1.1.14 with good wifi, but it has other many bugs.
Is there method that pick up wifi module from MIUI to MDJ?
Click to expand...
Click to collapse
Dude, Ive already told you you have to use a magldr compatible version, none of teh MDJ builds are compatible.
check these 2 topics aswell as some others for info on which builds work. I myself am using a edited version of NexusHD2 1.8 and works very well from MAGLDR-SD.
http://forum.xda-developers.com/showthread.php?t=913815
http://forum.xda-developers.com/showthread.php?t=913964
Download this version ANdroid fixed for magldr
http://www.multiupload.com/38KFUHNRJ6

Problems with the Uni-wlan

Hi guys,
i have a problem with the gingerbread rom. I can only connect to a "normal" wlan. If I try this at the uni-wlan WPA2-Enterprise (i think i spell it correctly) i have to sign in with mschapv2 audentification. I can chose these type of audentifcation but i cant sign in...
so now my question:
Is there any solution to fix it with the gingerbread rom?
Or must i us the Froyo rom.
sry for my bad english
i have the same problem
See this conlusion
http://forum.xda-developers.com/showthread.php?t=923956&highlight=wpa2+enterprise
May be due to not being sense...
Some of the kernals do not support this, I know for a fact that the CM7 builds by charan do support this encryption of wireless networks.
A lot of the kernals never supported this, the MDJ ones I know as I am using it and cannot get on the wireless where I am.
MDJ ROM... Computer says no!
I don't understand. Where do I get the MDJ gingerbread ROM? Is seen in the HD2 NAND BIBLE (http://forum.xda-developers.com/showthread.php?t=929324) under MDJ's CyanogenMod 7 (m-deejay) (http://forum.xda-developers.com/showthread.php?t=877777) but I can not enter as I posted to little on threads...
PS: Oh, and did you say this ROM works with WPA2-Enterprise PEAPv0/EAP-MSCHAPv2?
Solved
This problem was solved in v2.4.1
Changelog:
v2.4.1: Updated to tytung r6 kernel. This fixes IEEE 802.1x/EAP authentication support as well as native tethering.
TyphooN CyanogenMod 7
Click to expand...
Click to collapse
Thank you tyween et al.!

Categories

Resources