Related
Hi together,
Cause i don't know that the DROID2 and the MILESTONE2 are different phones, i tried to install the following:
http://forum.xda-developers.com/showthread.php?t=851623
I tried:
You must have root. You can download our 1 Click root HERE.
You must have Koush's Bootstrap program for your device. Download from Market or check HERE.
... after this, my MILESTONE2 is no more working - its in a kind of Boot-Loop. I turn it on, then the Motorola-Logo shows up after about 1 min it reboots and shows Logo again etc..
I also tried to flash-back with RDS Lite a current Version for my MILESTONE2 from here:
http://and-developers.com/sbf:milestone2
... but don't helps ! Flash works okay, but after flash still a Boot-Loop.
==> Please, can somebody help me ? What can i do ?
Thanks !!
MIKE
mikestalder said:
Hi together,
Cause i don't know that the DROID2 and the MILESTONE2 are different phones, i tried to install the following:
http://forum.xda-developers.com/showthread.php?t=851623
I tried:
You must have root. You can download our 1 Click root HERE.
You must have Koush's Bootstrap program for your device. Download from Market or check HERE.
... after this, my MILESTONE2 is no more working - its in a kind of Boot-Loop. I turn it on, then the Motorola-Logo shows up after about 1 min it reboots and shows Logo again etc..
I also tried to flash-back with RDS Lite a current Version for my MILESTONE2 from here:
http://and-developers.com/sbf:milestone2
... but don't helps ! Flash works okay, but after flash still a Boot-Loop.
==> Please, can somebody help me ? What can i do ?
Thanks !!
MIKE
Click to expand...
Click to collapse
You might have gone 80% of the way. You just need to hold X while booting up and it'll take you to a system menu thingy. Clear the cache and then do a factory reset. See if that helps.
Thanks for your answer.
If i push the "x" on the keyboard during boot up nothing happens. I see no other Boot-Menu ...
Any other idea ?
Thanks !
MIKE
mikestalder said:
Thanks for your answer.
If i push the "x" on the keyboard during boot up nothing happens. I see no other Boot-Menu ...
Any other idea ?
Thanks !
MIKE
Click to expand...
Click to collapse
Hold X while pressing the power button to power up. Hold it while it boots.
... thats exactly what i do - but i only see the Motorola-Logo - no more. Then it loops and reboots ..
MIKE
You may try to do a battery pull. Then insert the battery, hold 'X' while powering up, and keep holding 'X' until a screen comes up with a triangle with an exclamation point, and a little android dude. If you get to that screen, push the seach button (magnifying glass) on the keyboard, and now your in the stock bootloader. Then clear the data and clear the cache. If you have done those exact steps, then you may try holding the up arrow while powering on (obviously from an off state) which will put you in bootstrap mode, and from there you should be able to SBF.
Hi again,
Thanks for your answer. I can try what i want, no chance to get in stock bootloader-mode. I push power-button and the "x" on the keyboard, keep pressing "x" ... make battery-pull etc.
Please, any other idea ?
Regards,
MIKE
mikeeg02 said:
You may try to do a battery pull. Then insert the battery, hold 'X' while powering up, and keep holding 'X' until a screen comes up with a triangle with an exclamation point, and a little android dude. If you get to that screen, push the seach button (magnifying glass) on the keyboard, and now your in the stock bootloader. Then clear the data and clear the cache. If you have done those exact steps, then you may try holding the up arrow while powering on (obviously from an off state) which will put you in bootstrap mode, and from there you should be able to SBF.
Click to expand...
Click to collapse
see above from first post
==> As i wrote in my first post, i already SBF the phone several times.
... but still Boot-Loop !
Regards,
MIKE
My oppologies. Looking at the SBF files, are you certain you got the one for your phones area? I see theres one for the UK, and two for DE, AT, CH. Assuming its the one for DE, AT, CH, did you try both files?
Two last things, while SBF is running in RSD lite, it says PASS? And never a fail during the process? Secondly, what version of RSD lite are you running? I think 4.9 is the latest, and I remember seeing somethings required newer then 4.7 (If I recall offhand, it was the 2.3.2 sbf for droid 2)
1) ... no, i only tested with the one for my country "DE,AT,CH" - i flashed several times.
2) RDS Lite flashed the phone correctly. Then it rebooted the phone ... then it shows a message like "boot your phone manualy" - and it always runs in boot-loop again. So not really passed, but correctly flashed.
3) RDS Lite Version 4.9
Regards,
MIKE
Try the other file associated with DE, AT, CH. Also, some of the oddities of RSDlite, put the SBF file on your C:\ root directory Let me know how you make out.
Hi again,
I tried again with different SBF's (the one that are working ...) - no chance.
I also tried option Clear Flash before flashing (TI flash ...) - no chance.
==> Always the same sh.. reboot, then Boot-Loop.
MIKE
Have you already tried to do a wipe data&cache from recovery? ( after the flash with rsd lite, i mean )
Last thing that I know to try, have you tried putting the sbf file, in the root directory? (C:\)
Try flashing in linux maybe with the same SBF(not D2 sbf's I mean)?
It sounds like you might not have stock recovery anymore which is a problem.
Hi
Go in bootstrap recovery, make a full wie of tour data! Wie:factoryreset and then flashing the sbf file .....
Try to wipe the Phone ............
The sbf files for Milestone working!
-------------------------------------
Sent via the XDA Tapatalk App
Ok, see the little android dude
Hi again,
If i turn device off - then push the "x"-Key and connect the USB-Cable im able to get the screen with the "triangle with an exclamation point, and a little android dude". So far, so good !
But when i press the Search-Button (magnifying glass) im not able to enter to the menu - i also tried to press volume-up and power-button, no way to enter menu.
Any ideas about that ?
Thanks !!
MIKE
mikestalder said:
Hi again,
If i turn device off - then push the "x"-Key and connect the USB-Cable im able to get the screen with the "triangle with an exclamation point, and a little android dude". So far, so good !
But when i press the Search-Button (magnifying glass) im not able to enter to the menu - i also tried to press volume-up and power-button, no way to enter menu.
Any ideas about that ?
Thanks !!
MIKE
Click to expand...
Click to collapse
Make sure the magnifying glass is the one on the keyboard next to the @ sign (at least on the D2's it is.) The soft keys on the touchscreen don't work.
Sent from my DROID2 using XDA App
mikeeg02 said:
You may try to do a battery pull. Then insert the battery, hold 'X' while powering up, and keep holding 'X' until a screen comes up with a triangle with an exclamation point, and a little android dude. If you get to that screen, push the seach button (magnifying glass) on the keyboard, and now your in the stock bootloader. Then clear the data and clear the cache. If you have done those exact steps, then you may try holding the up arrow while powering on (obviously from an off state) which will put you in bootstrap mode, and from there you should be able to SBF.
Click to expand...
Click to collapse
Hi again,
OK, i was able to do all steps written above - on my Swiss-German Keyboards its the "@"-Key - not the "Magnifing glass"-Key to enter the Stock-Bootloader.
- I wiped ALL Data/Cache
- I reSBF with different version
... still BOOT-LOOP !!!
When i enter the Stock-Bootloader-Menu, i see the following Errors:
E:Can't mount CACHE:recovery/command
E:Can't mount CACHE:recovery/caller
E:Can't mount CACHE:recovery/log
Any ideas ?
Thanks,
MIKE
Hi, im about to flash my i5800 to 2.2, but came what i think is a simple question : the firmware rar, come with 4 md5 files,
I5800OXXJPF-CSC-MULTI-OXX.tar.md5
I5800XXJP4_PHONE.tar.md5
I5800XXJPF-REV02-Bootloader-low-CL794643.tar.md5
I5800XXJPF-REV02-PDA-CL794643.tar.md5
Well, on the tutorial, says to use the "one Package" option, should i load the PDA file on it?
thanks
No. Do not use one package option. JPF firmware released diffrently. You need to rename all 4 files to remove .md5. Then select individual files ODIN.
Do not use one package option
load individual files by pressing the BOOT, PHONE, PDA, CSC buttons.
Renaming is not required
odin downloader crashed in middle of upgrading and now my phone is not starting up .
Power button and other combo button are also not working help me
akss009 said:
odin downloader crashed in middle of upgrading and now my phone is not starting up .
Power button and other combo button are also not working help me
Click to expand...
Click to collapse
Did you also select the bootloader? If yes, then there is a possibility of bricking?
Try the following:
1. Remove battery
2. press and hold the power button for 15-20 seconds
3. Put in the battery
4. Press volume down + home + power key
This should take you to download mode. If it does, select all files one by one except bootloader. Also do not remove extension .md5. Odin will automatically check it.
Uncheck protect ops and upgrade.
If this fails, I dont have an idea. if someone else can help you it will be great else you will need to visit samsung service center. Act like you dont know anything
well wait, are you saying i should NOT use the bootloader? thanks for all the help guys, i just want to know that nothing goes wrong
so, on odin, i will put :
Boot: NONE
Phone: I5800XXJP4_PHONE.tar.md5
PDA: I5800XXJPF-REV02-PDA-CL794643.tar.md5
CSC: I5800OXXJPF-CSC-MULTI-OXX.tar.md5
EPS: None
is that right or should i put I5800XXJPF-REV02-Bootloader-low-CL794643.tar.md5 on boot option?
thanks again
infestedd said:
is that right or should i put I5800XXJPF-REV02-Bootloader-low-CL794643.tar.md5 on boot option?
Click to expand...
Click to collapse
There's no need to reflash the bootloader. It, however, minimizes the risk of bricking your device if you don't.
ok, really thanks, hope thats all i need to know, since there is no specifc tutorial for jpf
guys really thanks for everything, everything is running perfect, on my first attempt
thanks and screw samsung wth the official update lol!
i tried to replace the original file with a new one but i have this message "error " or " system restricted " .
Do you have the phone rooted? If not, http://forum.xda-developers.com/showthread.php?t=1044765
It worked for me on B138 rom.
It is not necessary to root the phone for this. Is the device mounted with read and write? If you do only have the permissions to read you cannot delete the file of course. Which OS do you have?
im using androzip to move the file .
Wait, what? You want to replace the file for the recovery-mode, right? You need to do this on a computer, you cannot do this on your phone. Start up your handset while holding vol+ and vol- at the same time. You will get a coloured screen and on the computer you can replace the file.
XphX said:
Wait, what? You want to replace the file for the recovery-mode, right? You need to do this on a computer, you cannot do this on your phone. Start up your handset while holding vol+ and vol- at the same time. You will get a coloured screen and on the computer you can replace the file.
Click to expand...
Click to collapse
Of course he can do it on his x5, but this way needs root.
Sent from my Huawei u8800 using XDA App
XphX said:
Wait, what? You want to replace the file for the recovery-mode, right? You need to do this on a computer, you cannot do this on your phone. Start up your handset while holding vol+ and vol- at the same time. You will get a coloured screen and on the computer you can replace the file.
Click to expand...
Click to collapse
i did it !! but i cant do step 4 below i just get the same pink screen then nothing happened
1. Important: If your handset does not come with a sd-card you need to install one. Otherwise you cannot install a custom ROM.
2. Install this. You just need to replace one file (backup the old one on your computer before overwriting).
3. Download a zipfile containing the ROM you want to install and place it onto your sd-card. Do not unzip it.
4. Start the phone while holding the vol+-button, you will then boot into the recovery mode you installed in step 2.
5. I saved the install-instructions in case I forget them:
levibuko said:
Of course he can do it on his x5, but this way needs root
Click to expand...
Click to collapse
Ah alright.
The instruction is a bit misleading. Do only press the vol+ button, that will boot into recovery. Did you install the recovery from here, by the way? That is the newest.
XphX said:
Ah alright.
The instruction is a bit misleading. Do only press the vol+ button, that will boot into recovery. Did you install the recovery from here, by the way? That is the newest.
Click to expand...
Click to collapse
I did it , thanks for your help . finally i can turn off orientation lock .
by the way , how i can get the US market with paid apps ??
Well if you browse the Market with an american IP-adress (VPN/Proxy) you should be good to go. But I don't know, maybe you run into other problems then. I have not tried this out...
i heard that there is a hacked version or maybe i have to root the phone to get this market .now i can get only free apps cuz i am not from US or a country that support this type of market .
hi 2 all
I want to brief how made brick my tab step by step
first of all i had an Acer_A500_4.010.43_COM_GEN1 3.1 stock rom on my tab that i upgrade it to 3.2 Acer_A500_7.006.01_COM_GEN1 by tablet then i decided to root my tablet for installation custom rom and i downgrade to 3.01 rom by this typic http://forum.xda-developers.com/showthread.php?t=1276227 method 1 i reverted successfully and after rooting i installed and tested this 3 roms (taboonay 2.2-thor 14.2&light speed 1.07) but each one had some problems like google map or gps or rotation screen so i installed a 3.1hc stock rom Acer_A500_4.010.41_COM_GEN1 and rooted that worked good but i had mistake and i forget erase update.zip file from my sd card
4days ago Mistakenly I turn on my tablet with recovery mode and iconia automattically gone to update mode (rom installation) i did nothing but this opration was stopped at 80% and my wrong was here i could not be patient and shut down my tab by power button and i bricked my tablet
after that i test all method for unbrick it like not stable rom , Chinese and whitout Chinese roms using of stock rom like Acer_A500_4.010.38_COM_GEN1
without any success only in not stable rom processes gone to 95 % and then stoped and nothing
after update to chinese rom it stopped at 30 % with yellow triangle sign
and then happend something bad and i loose my CWM
NOW if i want to go to recovery mode by pressing power+vol down keys Iconia show me a message
secure boot: image SOS checksum fail!
and in normal booting I have a locked black screen with nonworking touchables button and android word at left top of screen and clock & 15% battery sometimes it show a message for shutting down
i cant go to setting menu for active my usb debugging and my pc do not recognize my tablet
i cant hard reset my tab because it hanged in 2 message for 30 mins and i cant go to recovery mode and customer services says your device is out of warranty because rotting that
but Fortunately I have my UID
excuse me for long story
any body help me please
thank all of you
that is amazing over 150 visit of this help request without any answer please give me a Proposal
thanks
I have a501 .....
http://forum.xda-developers.com/showthread.php?t=1419164
the chinese rom and checksum error are supposed to happen.
the chines rom is an old unstable version but is provided so we can root it to install cwm and flash a working rom.
after the checksum error you needed to power off and then using the buttons enter recovery mode and go to 'Fix checksum error' in advanced menu - after that reboot.
you should do the following:
a)go back and read the entire post on what to do because you missed the last part
or
b)try the backdoor method
---------- Post added at 12:21 PM ---------- Previous post was at 11:49 AM ----------
just read your entire post again...there's alot going on there isnt there?
have you tried flashing the update.zip again with 3.0.1 on it...get back to the chinese rom, from there install iconia root and root it. Then install cwm and you should be all good - if that doesnt work then use timmyDeans backdoor method it does it for you, all you need to do is install acer recovery installer to install cwm, backup the original stock recovery when the app asks you, you will need it to OTA Update successfully...
Doesn't flashing stock rom remove cwm?
bendystrawboy said:
Doesn't flashing stock rom remove cwm?
Click to expand...
Click to collapse
yeh i just had trouble when i OTA'd last nite on the 2nd update, had to flash stock before it would install, but i may have restored the wrong one from acer recovery installer beforehand...a definite possibility!!!
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
darvis said:
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
Click to expand...
Click to collapse
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
timmyDean said:
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
Click to expand...
Click to collapse
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
darvis said:
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
Click to expand...
Click to collapse
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
timmyDean said:
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
Click to expand...
Click to collapse
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
darvis said:
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
Click to expand...
Click to collapse
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
timmyDean said:
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
Click to expand...
Click to collapse
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
darvis said:
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
Click to expand...
Click to collapse
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Moscow Desire said:
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
thanks a lot
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Click to expand...
Click to collapse
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
darvis said:
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
Click to expand...
Click to collapse
Answer me please
darvis said:
Answer me please
Click to expand...
Click to collapse
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
timmyDean said:
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
Click to expand...
Click to collapse
Hello sir
in upper post u tell me i must go to recover mode by pressing power & vol+
but only i can go to stock recovery with pressing power & vol-(not vol+)
is there any other method for going to recovery mode by (vol+) ?
because Mr Moscow Desire said in his upper post (post no 14 of this thread)
if yes how ?
if not ..... just thank u
there is only one recovery on your device..
you should slowly repost your exact trouble.. then do EXACTLY as someone tell you to fix it..
There is only one recovery on your device . If YOU FLASH CWM RECOVERY .. it overrides the acer recovery.
so if you dont have cwm revovery .
nevermind repost your system rom you are using .. rather or not you know what recovery you have .. Then someone can help you...
LOST BLONDE BABE I AM .. GIGGLES
gOOD LUCK..
Sorry you're having difficulty.
Please go here and download the is tool http://forum.xda-developers.com/showthread.php?t=1307539
Do EXACTLY what it says to do in the PDF
Hi there, I followed this post:
http://forum.xda-developers.com/showthread.php?t=1420728
And Rooting, etc worked fine, but I can't instal CWM or it does not work for some reason... I copied the Recovery.img to the folder but when i restart the phone and hold Vol+ and power the phone simply won't boot.
Can anyone help me?
80 Views and no one can help me?
Download rom manager from market and press reboot recovery.
Sent from my U8800 using Tapatalk 2 Beta-6
Qqqxxxzzz said:
Download rom manager from market and press reboot recovery.
Sent from my U8800 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Thank you so much, will try it now.
Hey, i tested Rom manager app and it detects my phone as U8160 instead of U8800, no problem with that?
nerusonu said:
Hey, i tested Rom manager app and it detects my phone as U8160 instead of U8800, no problem with that?
Click to expand...
Click to collapse
It's problem with some roms but just press cancel. Reboot into recovery option doesn't need that. Rom manager detects u8800 only on 32 kernel custom roms.
Sent from my U8800 using Tapatalk 2 Beta-6
This app works too:
https://play.google.com/store/apps/...vbS5zaXJpdXNhcHBsaWNhdGlvbnMucXVpY2tib290Il0.
Sent from my U8800 using Tapatalk 2 Beta-6
Something must be wrong with the recovery files i've been downloading... i used rom manager to reboot in to recovery and the phone simply stays stuck @ Huawei logo... And if i try to power on + Vol+ it won't start at all. You don't have a working Recovery image somewhere by any chance?
Edit...
What firmware you are using?
If it's B522 or newer, do this:
http://forum.xda-developers.com/showthread.php?t=1457490
Now, turn your phone off and take battery out. Hold volume+, volume- and power button. Your phone should now turn into pink screen. connect it to computer via USB. On your computer go disk(phone)>image and replace recovery image with cwm. Don't forget rename new recovery to recovery.img take battery out to turn off phone.
If not working I suggest you re-flash firmware, but I have still one method left if you don't want to do it.
Sent from my U8800 using Tapatalk 2
By what i can see I have this one:
U8800V100R001C00B517G001
I know that it's an old one but all the links are dead or removed for my unfortune.
Gonna try with that method instead, that was the method i used on the previous 2.2 Rom, didn't thought of doing it like that again, just followed the tutorial
nerusonu said:
By what i can see I have this one:
U8800V100R001C00B517G001
I know that it's an old one but all the links are dead or removed for my unfortune.
Gonna try with that method instead, that was the method i used on the previous 2.2 Rom, didn't thought of doing it like that again, just followed the tutorial
Click to expand...
Click to collapse
Hi,
try this:
http://forum.xda-developers.com/showthread.php?t=1546883
and this:
http://forum.xda-developers.com/showthread.php?t=1420728
Hth,
Ponder
Recopy
I'd say re-download and re-copy the recovery.img file using ES File Explorer, check the permissions, and then reboot your phone.
I found that I need to hold down Vol + and power for a few seconds even AFTER the Huawei logo is already showing.
ROM Manager doesn't detect your phone so I wouldn't use that.
Hope this helps
silverlining said:
I'd say re-download and re-copy the recovery.img file using ES File Explorer, check the permissions, and then reboot your phone.
I found that I need to hold down Vol + and power for a few seconds even AFTER the Huawei logo is already showing.
ROM Manager doesn't detect your phone so I wouldn't use that.
Hope this helps
Click to expand...
Click to collapse
I re-downloaded the file from another place(it was bigger than the one I had), and did all the steps again and it's working. The file I had must had something wrong.
Now it's running DZO's Aurora ICS and wow what a difference between both android versions.
Thanks to everyone that helped me.
nerusonu said:
I re-downloaded the file from another place(it was bigger than the one I had), and did all the steps again and it's working. The file I had must had something wrong.
Now it's running DZO's Aurora ICS and wow what a difference between both android versions.
Thanks to everyone that helped me.
Click to expand...
Click to collapse
It's a huge difference! Glad it worked! Enjoy!
nerusonu said:
Hi there, I followed this post:
http://forum.xda-developers.com/showthread.php?t=1420728
And Rooting, etc worked fine, but I can't instal CWM or it does not work for some reason... I copied the Recovery.img to the folder but when i restart the phone and hold Vol+ and power the phone simply won't boot.
Can anyone help me?
Click to expand...
Click to collapse
I had the same problem with mu Huawei U8800 (normal not pro), when I updated to 2.3 back in march this year, what I did, I went back and reinstalled the Beta version that came back in 2011 (v18) as I had saved it on my school computer (you can try and also search on google if there are some huawei beta roms for u8800 still available as I got mine from a past backup), then with that I was able to boot holding the volume + and - keys together with the power button I got the pink screen, and now I was able to copy and replace the CWM 'recovery' image when I connected the USB cable to the computer, Then I removed the cable and when I pressed the power button and the volume button + button i got CWM. To all the developers who came up with this. You are all amazing!