Database Users

G1 Wifi problems

Hi every1 here, my G1's wifi seemed doesn't work properly
Here's the details:
At first, i've got a lot of Force close error, so i reboot my device and found that it stuck at the first splash screen. So i wiped ext3 and reflashed the same rom, but the problem persists.
Then i download the AOSP rom and flashed and successed. but the WiFi notified me "Couldn't enable wifi" while i'm trying to enable it.
I though it maybe the permission problem of wpa_applicant.conf, and i managed to fix that, but no go.
I then tried to flash the "signed-dream_devphone_userdebug-ota-14721", and then the ROM. At this time, the WiFi could be enabled, but after it running for a while, it stuck right there(the icon showed that you're connected, but the fact is not), so i tried to disable the WiFi, and met this "Couldn't disable WiFi".
That's so weird.
And i also found that if i unplugged my TF card, this problem is gone.
But if i replugged in my TF card, no matter repartitioned or wiped, the problem shows again.
And if the TF card is FAT32 partition only, there won't be this problem...
Thank u for reading this.
And, is there any1 could help me ?
THanx in advance!

g1 wifi not working....
I HAVE kind of a similar problem
i have a TP-LINK wireless router and ive tried connecting to it through my device.
it connects perfectly and it worked once i dont know how after trying for like a million times but once i disconnected it didnt after that
i read somewhere for link sys that by changing the wep key to wpa tpik or something like that
it still doesnt work
im hopeless, every gadget of mine works with the same TP link router
my psp worked my iphone does even my notebook
just that my G1 isnt working at all
it even gets an ip and an excellent signal strenght but the internet doesnt seem to work
Can anyone please HELP..........

Try different channels.
located in G1's Wireless Option, then press menu, advanced.
U should change the channels of your Router at the same time.
omzi said:
I HAVE kind of a similar problem
i have a TP-LINK wireless router and ive tried connecting to it through my device.
it connects perfectly and it worked once i dont know how after trying for like a million times but once i disconnected it didnt after that
i read somewhere for link sys that by changing the wep key to wpa tpik or something like that
it still doesnt work
im hopeless, every gadget of mine works with the same TP link router
my psp worked my iphone does even my notebook
just that my G1 isnt working at all
it even gets an ip and an excellent signal strenght but the internet doesnt seem to work
Can anyone please HELP..........
Click to expand...
Click to collapse

My problem is something different .. because I can turn on / off the wifi, scan for networks, but I can not connect to none, my g1 this root, and has CM6 A2.2, however the wifi never could connect with no ROM version I installed, whether official or not, attached logcat output, which shows only the loop in which the connection is:
logcat:
D / NetworkStateTracker (112): setDetailed state, new and old = state = DISCONNECTED DISCONNECTED
V / WifiMonitor (112): Event [Authentication with 00:16:46:48:19:80 timed out.]
V / WifiMonitor (112): Event [CTRL-EVENT-STATE-CHANGE id = 2 state = 0]
V / WifiStateTracker (112): supplicant Changing state: ASSOCIATING ==> DISCONNECTED
V / WifiMonitor (112): Event [CTRL-EVENT-STATE-CHANGE id =- 1 state = 2]
V / WifiStateTracker (112): supplicant Changing state: DISCONNECTED ==> SCANNING
V / WifiMonitor (112): Event [Trying to associate with 00:16:46:48:19:80 (SSID = 'SABRE' freq = 2447 MHz)]
V / WifiMonitor (112): Event [CTRL-EVENT-STATE-CHANGE id =- 1 state = 3]
V / WifiStateTracker (112): supplicant Changing state: SCANNING ==> ASSOCIATING
D / WifiStateTracker (112): Reset DHCP connections and stopping
D / dalvikvm (1024): GC_EXPLICIT freed 251 objects / 13056 bytes in 112ms
D / WifiStateTracker (112): Disabling interface
D / NetworkStateTracker (112): setDetailed state, new and old = state = DISCONNECTED DISCONNECTED
D / dalvikvm (1024): GC_EXPLICIT freed 1317 objects / 71376 bytes in 73ms
V / WifiMonitor (112): Event [Authentication with 00:16:46:48:19:80 timed out.]
V / WifiMonitor (112): Event [CTRL-EVENT-STATE-CHANGE id = 2 state = 0]
V / WifiStateTracker (112): supplicant Changing state: ASSOCIATING ==> DISCONNECTED
V / WifiMonitor (112): Event [CTRL-EVENT-STATE-CHANGE id =- 1 state = 2]
V / WifiStateTracker (112): supplicant Changing state: DISCONNECTED ==> SCANNING
V / WifiMonitor (112): Event [Trying to associate with 00:16:46:48:19:80 (SSID = 'SABRE' freq = 2447 MHz)]
V / WifiMonitor (112): Event [CTRL-EVENT-STATE-CHANGE id =- 1 state = 3]
V / WifiStateTracker (112): supplicant Changing state: SCANNING ==> ASSOCIATING
D / WifiStateTracker (112): Reset DHCP connections and stopping
D / WifiStateTracker (112): Disabling interface
D / NetworkStateTracker (112): setDetailed state, new and old = state = DISCONNECTED DISCONNECTED
dmesg:
<6> [1236.843536] TIWL: Driver loading
<4> [1236.844055] wifi_probe
<4> [1236.844482] trout_wifi_power: 1
<4> [1237.007781] trout_wifi_reset: 0
<4> [1237.049926] trout_wifi_set_carddetect: 1
<7> [1237.050384] mmc0: card_present 1
<6> [1237.050598] mmc0: Slot detected status change (0 -> 1)
<3> [1238.868743] audpp: DMA missed obj = 20
<6> [1239.218292] audio_disable ()
<6> [1239.218811] audio_dsp_event: CFG_MSG DISABLE
<6> [1239.219268] audpp: disable
<6> [1239.219726] msm_adsp_disable () 'AUDPPTASK'
<6> [1239.220581] audpp: DISABLE
<6> [1239.222137] ADSP: closing module AUDPPTASK
<6> [1239.222656] ADSP: disable interrupt
<6> [1239.224487] audmgr: rpc_reply status 0
<3> [1239.254974] audmgr: DISABLED
<6> [1239.255584] ------------------------------
<4> [1239.621002] mmc0: card CLAIMS to support voltages below-the defined range. These will be ignored.
<6> [1239.624725] mmc0: new SDIO card at address 0001
<6> [1239.630584] TIWL: Found SDIO controller (vendor 0x104c, device 0x9066)
<6> [1239.644622] TIWL: Driver initialized (rc 0)
<4> [1239.645355] TIWL: 1251 PG 1.2
<6> [1239.645599] TIWL: Driver loaded
<4> [1240.176574] select 1467 (d.process.media), adj 9, size 4151, to kill
<4> [1240.177032] send SIGKILL to 1467 (d.process.media), adj 9, 4151 size
<4> [1241.034210] select 1475 (d.apps.uploader), adj 8, size 4012, to kill
<4> [1241.034637] send SIGKILL to 1475 (d.apps.uploader), adj 8, 4012 size
<6> [1242.700683] audio_enable ()
<6> [1242.700927]
<6> [1242.708435] audmgr: rpc_reply status 0
<6> [1242.722320] audmgr: READY rpc handle = 0x00000000
<6> [1242.786254] audmgr: rpc CODEC_CONFIG volume = 0x00002000
<6> [1242.786560] audpp: enable
<6> [1242.786956] ADSP: opening module AUDPPTASK
<6> [1242.788299] ADSP: module AUDPPTASK Has Been Registered
<6> [1242.788604] msm_adsp_enable () 'AUDPPTASK'state [0] id [4]
<6> [1242.790008] ADSP: rpc event = 0, proc_id = 2 module = 4, image = 0
<6> [1242.790496] ADSP: module AUDPPTASK: READY
<6> [1242.791259] audpp: ENABLE
<6> [1242.791503] audio_dsp_event: CFG_MSG ENABLE
<4> [1242.791748] ADSP: waiting for DSP ready write
<6> [1242.793243] audpp: unhandled msg id ffff
<3> [1244.354705] audpp: DMA missed obj = 20
<3> [1244.410705] audpp: DMA missed obj = 20
<3> [1244.522705] audpp: DMA missed obj = 20
<3> [1244.826751] audpp: DMA missed obj = 20
<3> [1245.074768] audpp: DMA missed obj = 20
<3> [1245.514770] audpp: DMA missed obj = 20
<3> [1245.818756] audpp: DMA missed obj = 20
<6> [1245.838928] audio_disable ()
<6> [1245.839416] audio_dsp_event: CFG_MSG DISABLE
<6> [1245.840270] audpp: disable
<6> [1245.840881] msm_adsp_disable () 'AUDPPTASK'
<6> [1245.841369] audpp: DISABLE
<6> [1245.843536] ADSP: closing module AUDPPTASK
<6> [1245.844085] ADSP: disable interrupt
<6> [1245.845794] audmgr: rpc_reply status 0
<3> [1245.876342] audmgr: DISABLED
<6> [1245.876922] ------------------------------
Regards...

Dear all,
is this the section of posting wifi problems,... because first there's nothing problems when i connected the wifi, then suddenly at the next hour when i tried to connect the wifi (my phone is G1 with latest room rooted) it auto disable after 7 seconds. when I change the setting for autodisable was never there's nothing change and it can't scan for a networks at all,...
Everything was fine,... tethering, bluetooth, etc... only the wifi can't connect to anywhere....
Latest things i do was installed the google maps
thanks for your help

Wifi Problem on G1
I dont know what went wrong with my phone as i brought a used G1 and it was working fine. I dont know whether its rooted or not but every thing was working fine but today.
I hard reseted my phone due to slow working. and i did install all the application which i was running before. My wifi was working fine as well ( I am using D-Link router ). I turn it off and after an hour or two i turn back it on. first it shows that turning on then it shows unable to start wifi.
I did reset my phone again but the same problem. after restarting phone first time it do take few minutes like its searching for signals but then it shows unable to start wifi.
I was also using wifi analyzer from android market.
Given below is detail to my G1.
If any one have any solution do email me i be really very great full.
Model number : T-Mobile G1
Firmware Version : 1.6
Baseband Version : 62.50SC.20.17H_2.22.23.02
Kernel Version : 2.6.29-00479-g3c7df37 [email protected]#19
Build number : DMD64
my email id is [email protected]
please do help as i dont know what is the problem.

you should use biffmod 2.0.1, it will solve your problem most probably

WiFI Problems
Hi Friends.
1) You can try with an OEM battery pack. (worked for me on one)
2) You can try with a different daugther board. (worked for me on anotherone)
Please let me know about your experience.

[Q] Self-inflicted WiFi configuration trouble

SOLVED: I restored the "WiFi Access Points" backup from Titanium and I'm back online. Is there any way to get details on what files that entails?
Original query:
I'm trying to connect to a corporate IEEE8021x network, and I hand-edited my /data/misc/wifi/wpa_supplicant.conf to add my corporate network.
This didn't work, the WiFi wouldn't even enable; the top item in the Wi-Fi Settings screen Says "Error". I deleted the entry I added, but the results are the same. I then deleted everything except the first two lines
ctrl_interface=tiwlan0
update_config=1
and it appears to try harder to enable it, and it shows on for about 15 seconds, but no access points show up, the GUI asks if I want to forceclose Settings, and then it turns off.
wpa_supplicant.conf had those two lines in it, and the usual list of access points I've seen, nothing else.
Is there some other WiFi config file I need to clear out, or GUI access to this stuff? I just want to get open-access APs working again for now.
dmesg reports:
TIWLAN: driver init
TI WiLink 1271 SDIO: Driver loaded
evt_wifi_power: 0
evt_wifi_set_carddetect: 0
mmc2: card_present 0
kxtf9 1-000f: IRQ TAP2 [2]
kxtf9 1-000f: IRQ TAP2 [4]
wlanDrvIf_Stop
kxtf9 1-000f: IRQ TAP2 [1]
kxtf9 1-000f: IRQ TAP2 [8]
tiwlan: 20 sec os_SignalObjectWait timeout
evt_wifi_set_carddetect: 0
evt_wifi_reset: 1
evt_wifi_power: 0
and the driver unloads
Thanks!

No WIFI. ERROR!

Hey there,
I have a mytouch4g with cyanogenmod 7. The wifi isnt working, it just turns on, then it freezes and it closes again. I tried different roms and still it isnt working. On the stock rom it worked for just a few tries, then it stopped working and gives me an error message. The log says something about not being able to find the 'supplicant'.
GLACIER PVT ENG S-OFF
HBOOT-0.85.2007 (PD1510000)
MICROP-0429
eMMC-boot
Oct 11 2010, 12:44:14
E/wpa_supplicant( 2315): ioctl[SIOCGIFFLAGS]
E/wpa_supplicant( 2315): ioctl[SIOCSIWPMKSA]
E/wpa_supplicant( 2315): ioctl[SIOCSIWMODE]
E/wpa_supplicant( 2315): ioctl[SIOCGIRANGE]
E/wpa_supplicant( 2315): ioctl[SIOCGIWMODE]
E/wpa_supplicant( 2315): ioctl[SIOCSIWAP]
E/wpa_supplicant( 2315): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2315): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2315): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2315): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2315): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2315): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2315): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2315): ioctl[SIOCSIWENCODE]
I/wpa_supplicant( 2315): CTRL-EVENT-STATE-CHANGE id=-1 state=0 BSSID=00:00:00:00
:00:00
I//system/bin/wpa_supplicant( 2313): Could not get interface 'eth0' flags
I//system/bin/wpa_supplicant( 2313): Could not configure driver to use managed m
ode
I//system/bin/wpa_supplicant( 2313): ioctl[SIOCGIFINDEX]: No such device
E/wpa_supplicant( 2315): Failed to disable WPA in the driver.
E/wpa_supplicant( 2315): ioctl[SIOCGIWMODE]
E/wpa_supplicant( 2315): ioctl[SIOCSIWAP]
E/wpa_supplicant( 2315): ioctl[SIOCGIFFLAGS]
I/logwrapper( 2313): /system/bin/wpa_supplicant terminated by exit(255)
D/dalvikvm( 2135): GC_EXPLICIT freed 503K, 51% free 3234K/6471K, external 4022K/
5046K, paused 66ms
D/WifiStateTracker( 1341): Reset connections and stopping DHCP
D/WifiStateTracker( 1341): Disabling interface
E/WifiHW ( 1341): Supplicant not running, cannot connect
D/dalvikvm( 1711): GC_EXPLICIT freed 5K, 50% free 3202K/6279K, external 0K/0K, p
aused 60ms
E/WifiHW ( 1341): Supplicant not running, cannot connect
E/WifiHW ( 1341): Supplicant not running, cannot connect
V/WifiStateTracker( 1341): Supplicant died unexpectedly
D/WifiStateTracker( 1341): Reset connections and stopping DHCP
D/WifiStateTracker( 1341): Disabling interface
I/Jni WCMLinkStatus ( 1438): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 1438): addr: Ox0
D/WifiStateTracker( 1341): Reset connections and stopping DHCP
D/SettingsAppWidgetProvider( 1846): Widget is from a previous version... Let's u
pdate
D/SettingsAppWidgetProvider( 1846): No instances yet... Wait for at least one in
stance to exist before adding global settings
D/WifiStateTracker( 1341): Disabling interface
Click to expand...
Click to collapse

Which wifi router are you using?
Security (wep, wpa)?
Are you hiding your network name?
Sent from my HTC Panache / CM7 using xda premium.

I'm not sure whether I understand your reply but I am not even able to scan for the networks. When I press wifi on, it turns on, freezes, turns off. When I try to turn on portable wifi hotspot it immediately says 'error'.

mornioas said:
I'm not sure whether I understand your reply but I am not even able to scan for the networks. When I press wifi on, it turns on, freezes, turns off. When I try to turn on portable wifi hotspot it immediately says 'error'.
Click to expand...
Click to collapse
are you running any custom Kernels?
Have you tried running any other radio files?

Baseband version:
12.28b.60.140eU_26.03.02.26_M
Kernel Version:
2.6.35.14-cyanogenmod-ga63ac6f shade[email protected] #1
Click to expand...
Click to collapse
I assume it is a custom Kernel version. About the radio files, I read that it actually has nothing to do with the wifi so I havent tried to change that. What I would like to add is that somehow (perhaps it is normal) I am not able to use my mobile network internet and the mobile network calling at the same time. I noticed while in the car using the GPS and calling (handsfree ofcourse) the maps stop loading because there is suddenly no internet while I call.

Try flashing a different kernel like a Darkside team one
Sent from my HTC Glacier using xda premium

I used both darkside V4 and another one based on CM7 it seems. Both give no change.

I was asking more details on your home wifi setup to be sure you don't have some kind of special config...
One of my archos (on froyo) was unable to connect to my network with wpa2 and the router set to channel 12 and +.
Are you able to use your wifi in a cafe or work/school?
Sent from my HTC Panache / CM7 using xda premium.

No the wifi is unable to scan networks, unable to add networks, and unable to turn on.

i have same problem .. can u advice we?

Well, first off you're correct about it being non radio related.
Do you format /system between rom flashes? That is where the modules for controlling wifi reside. Somehow i doubt that's it, though.

I have the same issue, was happening when unrooted as well, bought the phone used, so i have no clue.
I did try formatting system, and everything before flashing roms. any other ideas

Had the same problem. Its nothing with kernel, rom, radio,etc. I even restored my phone to stock and turned S-on. Wifi still didnt turn on at all or work. So I sent my phone in to htc for repair.
- if u hav warranty (call htc to check), then unroot it and send it to them for repair.

My Galaxy Player has the same issue, I managed to get it working better by going into the wifi config file and fixing the directory for the wifi module, I still get the error, but I can at least turn it on now and it stays on for a decent amount of time.

WiFi suddenly always searching, no ssids, nothing found

Hi,
I intensively searched for my problem, but found always other non-related stuff.
Recently (last 1, 2 days) my WiFi didn't connect to any APs any more. I was using CN nightlies and franco kernel, so today I did update CN without franco. Afterwards I downgraded CN and did a radio update and now I tried the stock 4.2.2 image with the flash-all script, which also seemed to reflash my radio.
The default wifi dialog always displayed the saved wifis only. And after installing stock, the initial wifi dialog displayed "searching" only for a very long time. Sometimes I see some networks and I even managed to connect to mine, but it dropped immediately.
I know, this is very undetailed, but do you have any recommendations / logs to look out / smth which could point me in the right direction? Or is my hardware just broken?
logcat outputs this when turning wi-fi on (on stock 4.2.2, unrooted):
D/WifiService( 499): setWifiEnabled: true pid=1942, uid=1000
D/BluetoothAdapter( 1942): 1110956336: getState() : mService = null. Returning STATE_OFF
W/Netd ( 156): No subsystem found in netlink event
D/NetlinkEvent( 156): Unexpected netlink message. type=0x11
W/Netd ( 156): No subsystem found in netlink event
D/NetlinkEvent( 156): Unexpected netlink message. type=0x11
D/Tethering( 499): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 499): InitialState.processMessage what=4
D/Tethering( 499): sendTetherStateChangedBroadcast 0, 0, 0
D/SoftapController( 156): Softap fwReload - Ok
D/CommandListener( 156): Setting iface cfg
D/CommandListener( 156): Trying to bring down wlan0
E/NetdConnector( 499): NDC Command {219 softap fwreload wlan0 STA} took too long (739ms)
I/wpa_supplicant( 9715): Successfully initialized wpa_supplicant
I/wpa_supplicant( 9715): rfkill: Cannot open RFKILL control device
I/wpa_supplicant( 9715): rfkill: Cannot open RFKILL control device
D/CommandListener( 156): Setting iface cfg
D/CommandListener( 156): Trying to bring up p2p0
D/BluetoothAdapter( 1942): 1110956336: getState() : mService = null. Returning STATE_OFF
Click to expand...
Click to collapse
when flashing stock (via the official google flash scripts), stock firmware files (qualcom, ..) are also flashed, right? or could I do something useful with the official google binaries?

Stupid post.... Ignore

Ethernet support in Cyanogenmod 10.2.1?

I recently re-acquired a usb-to-lan adapter, since my previous one broke after few months of usage.
The new one shows a red light when it's connected to the router via LAN and the tablet via USB. Furthermore dmesg shows me the USB OTG device is successful recognized. So the adapter is OK, but the internet connection is not started.
I noticed that I have no ethernet options in my Settings. I don't remember where they was located, but I remember that there was some settings about LAN and I was able to see LAN usage data separately from wifi usage.
From the day my first usb-to-lan adapter died and now, I upgraded 10.2 to 11 and returned back to 10.2, since I had some problems with startup delay and GPS icon. But if I remember well I used Cyanogenmod 10.2 with the first usb-to-lan adapter, and not CM 11. I have gapps installed.

up.

i know CarbonRom supports Ethernet android 4.4.4
but i dont know about CM
try this out https://play.google.com/store/apps/details?id=xda.usbhost.test&hl=en

It doesn't work. Logcat gives me this error:
PHP:
D/CommandListener( 153): Clearing all IP addresses on wlan0
D/ConnectivityService( 490): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
D/ConnectivityService( 490): tryFailover: set mActiveDefaultNetwork=-1, prevNetType=1
D/ConnectivityService( 490): Attempting to switch to mobile
D/ConnectivityService( 490): Attempting to switch to BLUETOOTH_TETHER
D/ConnectivityService( 490): Attempting to switch to ETHERNET
D/NetUtils( 490): android_net_utils_resetConnections in env=*** clazz=*** iface=wlan0 mask=0x3
D/BluetoothAdapter( 2249): 1101298232: getState() : mService = null. Returning STATE_OFF
D/ConnectivityService( 490): resetConnections(wlan0, 3)
W/Smack/Packet( 897): notify conn break (IOEx), close connection
D/Nat464Xlat( 490): requiresClat: netType=1, hasIPv4Address=false
I/qtaguid ( 897): Failed write_ctrl(u 66) res=-1 errno=22
I/qtaguid ( 897): Untagging socket 66 failed errno=-22
W/NetworkManagementSocketTagger( 897): untagSocket(66) failed with errno -22
D/ConnectivityService( 490): handleInetConditionChange: no active default network - ignore
I/wpa_supplicant( 5105): p2p0: CTRL-EVENT-TERMINATING
I/wpa_supplicant( 5105): CTRL_IFACE monitor[0]: 2 - No such file or directory
I/wpa_supplicant( 5105): wlan0: CTRL-EVENT-DISCONNECTED bssid=*** reason=3 locally_generated=1

Lucas Malor said:
It doesn't work. Logcat gives me this error:
PHP:
D/CommandListener( 153): Clearing all IP addresses on wlan0
D/ConnectivityService( 490): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
D/ConnectivityService( 490): tryFailover: set mActiveDefaultNetwork=-1, prevNetType=1
D/ConnectivityService( 490): Attempting to switch to mobile
D/ConnectivityService( 490): Attempting to switch to BLUETOOTH_TETHER
D/ConnectivityService( 490): Attempting to switch to ETHERNET
D/NetUtils( 490): android_net_utils_resetConnections in env=*** clazz=*** iface=wlan0 mask=0x3
D/BluetoothAdapter( 2249): 1101298232: getState() : mService = null. Returning STATE_OFF
D/ConnectivityService( 490): resetConnections(wlan0, 3)
W/Smack/Packet( 897): notify conn break (IOEx), close connection
D/Nat464Xlat( 490): requiresClat: netType=1, hasIPv4Address=false
I/qtaguid ( 897): Failed write_ctrl(u 66) res=-1 errno=22
I/qtaguid ( 897): Untagging socket 66 failed errno=-22
W/NetworkManagementSocketTagger( 897): untagSocket(66) failed with errno -22
D/ConnectivityService( 490): handleInetConditionChange: no active default network - ignore
I/wpa_supplicant( 5105): p2p0: CTRL-EVENT-TERMINATING
I/wpa_supplicant( 5105): CTRL_IFACE monitor[0]: 2 - No such file or directory
I/wpa_supplicant( 5105): wlan0: CTRL-EVENT-DISCONNECTED bssid=*** reason=3 locally_generated=1
Click to expand...
Click to collapse
then the adapted you have is not supported

The previous adapter worked and it was apparently identical. Is there a way to do some deeper debug, to understand the exact problem?