Hello,
I installed hspl3, installed magldr112. But when I restart my htc (and keep on pressing on the power button) all that happen is: nothing
I keep on seeing the white HTC screen: that’s it.
I tried to reinstall magldr112 already, but that did not help (I still can access bootloader screen).
Thanks for your help!
Koen
Koen
Related
hi all ..
I did flash my HTC wizard with new rom after finishing the install the device reboot and stacked on the boot screen then I tried to go to the boot screen but I couldn't , I tried to make hard rest but also I coudn't nothing is working even charing the device cant be made .
bye bye
Are you able to get to a multi-colored screen with numbers?
In case you don't know, to get to the bootloader screen hold down the camera button and press the power button.
now i got the same problem.
I updated the rom & now i have the multi-colored (red/green/blue/white) screen
with RUU - IPL 2.18 - SPL 2.18 - USB on it (Qtek 9100)
I downloaded the tools from Vippie in the thread "How to flash a new ROM to your Wizard... a little tutorial!" but those won't help...
anybody got any advice? I would like to install WM6...
thanks in advance!
hi, i have a htc magic/sapphire phone, after downloading and updating from sd card (update.zip) my phone cant turn on when i'm press the power on key. and i cant recognize it on my compuiter via usb, so my computer is't connet to my htc magic from usb.
all of i can know about short keys (home+end, back+end) not responding correctly
when i'm press trackball+end a have a BLUE LED(not green) on top of my phone
what can i do
please. tell me what can do for turning on my phone, thanks
i have a similar problem!!!! help me!!
Same problem me too... I tried splhard1_update_signed.zip
But when I restart... nothing!!! The magic doesn't start up... I have only a bad uggly black screen...
Tried : HOME+POWER, HOME+POWER+BACK; POWER+VOLDOWN
But nothing... ideas??
Hey anyone can help me?
Maybe unmodified Magic cannot run updates? Have a look at the "Sapphire android development" forum for the "daldroid" custom rom or others
Just a follow-up to my above post:
My reasoning comes from this post:
http://forum.xda-developers.com/showpost.php?p=3948652&postcount=220
From reading the procedure of successfully flashing another ROM, it looks like you need a recovery image first.
NOW ITS FIXED. THANKS
Dear all,
after experimenting quite a few cooked rom, my hd2 stoped working all on a sudden. When i tried to switch it on it came only the white screen with green htc written on it. And it (white screen) stucked and used to stay on. I took the battery off and switched on again it remained same. Just before a while i tried again, now the white screen coming for a second and no more pulse. Please advice me.
Thanks in advance.
Zaman
connect your phone to your PC via ActiveSync/WMDC and run your stock ROM and see if that helps...even with no ROM on the phone Windows should still show connected
http://forum.xda-developers.com/showthread.php?t=609477
*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear). Verify the screen shows SPL-1.42.HSPL, which is the HardSPL version*
Click to expand...
Click to collapse
If you get tri-colored screen you can flash any ROM that you want without ActiveSync ... one of the advantages of HSPL if you have one installed.
Thanks again,
its not the tricolour screen.
It doesn't connect with the pc through active sync. As i tried to go for another rom after it got stuck.
Really worried a bit.
Sorry bro, i got it what you said. I got the tri colored screen after following your instruction.but its staying for a second and going off. I have done the hspl installed before. Any more advice would really be of very helpfull.
Thanks
Which ROM/radio are you using? If you've got HSPL installed it shouldn't be difficult to get it working again, you should just need to flash to a compatible ROM and radio.
[email protected] said:
Sorry bro, i got it what you said. I got the tri colored screen after following your instruction.but its staying for a second and going off. I have done the hspl installed before. Any more advice would really be of very helpfull.
Thanks
Click to expand...
Click to collapse
If you have HSPL and can see tri-color screen on display ... just plug in usb cable (that is connected to PC) in HD2 and start flashing process again the same way that you did before. I suggest you flash some of the official ROMs.
Thanks _x_
after having seen tricoloured screen i connected it with usb cable and flashed as normal. It did work for. And the phone is alive again.
Thanks to all of you for your attention and helps.
Cheers.
Glad I could help but it is "bepe" that you should thank to for HSPL
http://forum.xda-developers.com/showthread.php?t=611433
can you also change the thread title.. Add "Fixed"
Hi all,
I have this problem:
1) I tried install MAGLDR 1.13 on my phone and started ROM update utility. Update run everything ( On the screen was update from 3.15 to 2.00 ROM????? I dont understand)
2) After restart the white screen with HTC Logo is displayed and nothing - no response
3) The bootloader by pressing vol. down+ power does not work. I press everything (vol + and -) and still same - white screen with logo.
4) I cant use standart flash by PC conection, because phone didnt connect to PC.
Please, is there any help how to install bootloader and new ROM from SD card? Or other way how to repair it.
Thanks for any hint (except throw the phone from window )
PS: Please use some kind of easy English, my English is little poor and some technical words should be problem
Ive had the same problem, your bootloader is kind of broken! In 1 out of 50 tries you will reach the bootloader and then immideatly flash original spl and a stockrom.
Then send it to htc for warranty
Sent from my HTC HD2 using XDA App
boot
pres first on volume down button and then pressing power button . volume down button hold on to you in the colored screen. Once on colored screen with usb on pc and wm rom flashing.
DO this:
go to this : http://forum.xda-developers.com/showthread.php?t=945427
do step 1- 5 . Make sure you have HSPL 2.08 !
feel free to ask questions.
Hi All,
i was tring to install Android to my HTC HD2 Wm6.5 when it boot something happened it stop. Then it is not connect to computer and do not work Hard Reset ROM deleted Compleatly blank.
When i open device screen olnh HTC logo. No work.
How could i install any Rom?
Win65 or Android.
Please Help.
Can you get to the Bootloader....
the screen with rainbow colors ??
Seems like this is cropping up on a daily basis lately.......
As mentioned by backlash, get to bootloader......
(turn on while holding vol down)
Check your HSPL is still installed.
Reflash a WM6.5 ROM..
Then follow this step by step guide.........
thank you. i install wm65 again.
i wont try android again. for while