my phone titan is not to phone call
triangle icon on
any time change network setting
not to call phone
how can i do
i am not sprint,verizone and etc.... user
please step by guide thank
Moved to general as not rom development.
Related
I have a colleague with a HTC P3600 GER, he complains that sometimes when he presses green button to answer a call or red button to end the call the device becomes unresponsive and he has to soft reset the device.
Is this a known problem?
Problem 3G -> GSM
Hi !
Same issue with my device but only in one condition:
I get an incoming call within a mixed 3G/GSM provider network (A1-Vodafone Austria) - i press the green button and my Trinity switches from 3G to G - the call seems to be answered but i cannot hear anything.
----->I wrote the following error description to HTC:
Massive problem answering phone calls in mixed GSM/UMTS network.
My P3600 works fine when the display shows 3G Network. Answering a call works fine by pressing the left phone button. The display closes the caller bubble and switches to the connected status and shows caller and time and so on. But every time the phone is connected to only GSM radio station - display shows "G" beside the antenna icon i cannot answer a single call. Pressing the left phone button results in showing the white bubble with caller information and nothing happens - the call doesnt start the calling party always hear the normal beep tone while waiting for pick up of the phone. In this circumstances i cannot hear anything from speaker and also cannot end the call by pressing the right phone button (hangup) - the software of the P3600 stops responding and the caller bubble is frozen at the display. When the call is discontinued by the caller the P3600 resets to normal activity waiting for a call and showing a missed call !! This happens at every GSM call - about 10 t! imes since yesterday !! It is very important for me that i can answer calls in both network connection modes because the austrian provider A1/Vodafone has mixed environment all over the country. The receipton of GSM while the problem comes up is always more than 2 or 3 bars on antenna display.
Hope that there is some possible solution for this problem.
ROM Software Version is:
1.16.407.2 (German)
Setting for network provider is:
Automatic
Band selection is:
Auto
Auto
Many thanks in advance !!
Gerhard from Austria
----->The answer from HTC was:
Hello
This seems to be a very strange issue that you are experiencing and something that we have not heard of before.
Does this occur every time that you receive a call in a non-3G area?
I would recommend that you perform a Hard Reset on the device. This will restore the device back to the factory software settings. This will also remove all settings, contact , calendar information as well as any files and SMS.
Once this has been performed I would ask you to test if this has resolved your issue. If this has then you should experience no more issues. If this does not solve your issue then I would recommend that you contact your local repair center, details below, to arrange a repair of your device.
+ 43 (0) 508115555
[email protected] <mailto:[email protected]>
Yours sincerely
Dan Mackie
[email protected]
http://www.htc.com
----->The Hardreset does not fix the problem :-(
Still waiting for a firmware upgrade ....
Gerhard
Since Uprade to Radio ROM 1.41.00.11 (http://forum.xda-developers.com/showthread.php?t=304006) i have no more problems with answering phone calls !!!
Hope the Radio ROM will be included in an official ROM Upgrade from HTC soon.
Gerhard
I have a 8125 with custome wm6
and cid and sim unlocked
at the top there is a triangle that means roaming but
it was the same t-mobile sim that i had on my t-mobile razr and dint say that on that phone any ideas why or howto take it off??
Reg Edit
Yeah I have had the same problem with my 8125 thinking I'm roaming when I'm not. Try this reg fix to get rid of the triangle:
HKLM\Drivers\BuiltIn\RIL\DisableRoamingIndicator
Change value to 1
Hope that helps.
???
Sorry
but I dont really get your directions
Install this CAB to remove the roaming indicator
Thanks you !!!!
Ok thanks for the cab
but there one problem every time I install it, it does take off the roaming triangle but
when i go to my call log it shows the number but the pictures at the left were it said if it was incoming or outgoing are erases those pictures and when i try installing the phone pad it shows the roaming triangle againg so i cat have both
It's a recent T-Mobile problem which seems to only affect HTC (MDA) devices...
http://forum.xda-developers.com/showthread.php?t=324110
I have installed minutebeep sp from palmarysoft for call connect alert, when i set start talk signal as vibrate while calling and the called person answers my call, my phone doesn't vibrate, but if I set sound it plays sound. I asked the developers of palmarysoft they said some OEM doesn't allow hardware access during call.
I request u to kindly give me some solution.
I have O2 Xphone IIm,(Hurricane/HTC Amedeus variant) upgraded to wm6
Thanks in advance
Hi all,
I've searched but not found this problem posted elsewhere, sorry if it has.
My HD2 on O2 has started sometimes sending incoming call straight to "voicemail" or "unavailable" when there's a perfectly good signal available.
There's no sign that there's an incoming call, the first thing I know is when I get a txt from O2 notifying a voicemail.
My settings are:
"Forward all incoming phone calls" - unticked
"Forward phone calls only if":
No answer (voicemail number)
"Forward after" - 30 seconds
Unavailable (Network unavailable number)
Busy - Unticked
Last night my GF tried to call the phone from next to me on the sofa, my phone was in use with the "Home" tab showing, full HSDPA signal, it didn't ring and went straight to "unavailable".
I called her back, no problem, and then my phone rang the next time she called me.
The same thing has happened tonight, someone called and was directed to voicemail, the phone was right in front of me with a good 3G/HSDPA signal.
Once again, after I made an outgoing call the phone then rang for a new incoming call.
This smells like a similar problem to the "Has my HD2 died or not" thread
Anyone else had this problem?
ROM HTC1.66.405.2 WWE
RADIO 2.06.51.07
I"ve got the same problem here.. does anyone have any suggestions to a possible fix?
Im got the same radio and rom version as well but have also tried cooked roms too.
Any help would be much appreciated.
Mine does the same
Still stock rom from vodafone nl
Rom 1.72.172.0
Radio 2.07.51.22_2
My first port of call would be the telecoms company - to make sure that they haven't messed up your settings.
Personally I called my phone provider (T-Mobile UK) and got them to stop diverting calls to the answer-phone. Calling the answer-phone was outwith my contract 'free minutes'. Since I knew who had called me (by the missed calls) it was easier to call them back at a time I wanted or ignore them.
Hi there,
I have a problem. 2 days ago i put android on my HD2 and it worked perfectly but now i can't recieve calls or make any calls. If i want to make a call he put auto. 011 in the phone number and than it says 'services is not available' but i can text the person but not call them. When i boot my windows mobile os i can make calls and recieve so thats strange. My radio version is 2.0.12 and i put the newest android os on my phone.
Slagers said:
Hi there,
I have a problem. 2 days ago i put android on my HD2 and it worked perfectly but now i can't recieve calls or make any calls. If i want to make a call he put auto. 011 in the phone number and than it says 'services is not available' but i can text the person but not call them. When i boot my windows mobile os i can make calls and recieve so thats strange. My radio version is 2.0.12 and i put the newest android os on my phone.
Click to expand...
Click to collapse
when you try to call someone , the device automatically adds 011 to the # ?
It's a setting you can enable/disable in the settings. I'm sorry I cant advise you ATM as
I'm not running android,I'm using WinMo, But i remember that it was " Add Country code or prefix to Numbers " or something like this, just disable it .
But others should be able to call you normally, as their phones doesn't add prefix.
Hope others can help you
Hi kawazaki,
Thanks for the response, but if other people call me they here the dailing note. But my phone isnt responding on that so i can't see that some1 is calling me. And if i boot in WinMo i can recieve calls and make calls (strange)?
Some1 help me
*Maybe i found something but i can;t change it (AAAH) Maybe you guys can help. I found some call settings named:
Call barring settings Then i see All outgoing (Disabled) All incoming (Disabled) than i want to change it in enable but i requires a password :S
Please help im desperate
samething just happened to both me and my friend's hd2s on android,,he told me all he did was take out the battery and as soon as the phone boots,,make a call,,i tried it in mine nd chi ching,,works!