I have installed minutebeep sp from palmarysoft for call connect alert, when i set start talk signal as vibrate while calling and the called person answers my call, my phone doesn't vibrate, but if I set sound it plays sound. I asked the developers of palmarysoft they said some OEM doesn't allow hardware access during call.
I request u to kindly give me some solution.
I have O2 Xphone IIm,(Hurricane/HTC Amedeus variant) upgraded to wm6
Thanks in advance
Related
I am experiencing a problem when I am on an incoming call talking and I get the beep for a second incoming call. I keep talking on call one, when suddenly I am not able to hear the first caller. The display shows first call still running.
Has anyone else experienced this before I take phone back to dealer and does anyone know of a cure. My callers are getting a bit frustrated at being cut off.
I have ROM 1.66.00WWE, dated 02/20/04, downloaded from O2 official site and radio ver 1337.18. My XDA2 is unlocked using XDA developers tool. My SIM is on the Orange network in UK.
Any help gratefully appreciated.
Richard Racer
Same problem - no solution yet?
dropped calls
Hi there,
I eliminated the problem by removing the bluetooth tools BT stack software. problem went away.
Regards
Richard
Hi
just wondered if anyone can help,i have had a problem for a while which i have put up with,but now its getting to much,whilst on a call using my hbh 35 bluetooth headset,if i get another incomming call which i ignore and it goes to my voicebox,after a while 901 calls and i get disconnected from my current call i can still see the call maintained but cannot retrieve it,any ideas?
regards
nigel (complete novice !)
Got a question with my O2 mini. Everytime I dial a number, I don't hear any dialing tones. Not talking about the dialing pad tones but you know with any phone, you dial the number and press the green button. Then as you are waiting for a connection, you can hear the dialing tones.
I don't get that with my mini ..it's just silence until a connection is made and you can hear someone speaking at the other end. I wonder if this is normal?
Surely someone can answer this simple question. Is there a dial tone on the O2 mini or iMate JAM while waiting for a connection? dial tones like dialing or engage signal.
Easy Fix
had to just set the TAPI signal on the device to "On" and everything is fixed..woohoo!!
I have a colleague with a HTC P3600 GER, he complains that sometimes when he presses green button to answer a call or red button to end the call the device becomes unresponsive and he has to soft reset the device.
Is this a known problem?
Problem 3G -> GSM
Hi !
Same issue with my device but only in one condition:
I get an incoming call within a mixed 3G/GSM provider network (A1-Vodafone Austria) - i press the green button and my Trinity switches from 3G to G - the call seems to be answered but i cannot hear anything.
----->I wrote the following error description to HTC:
Massive problem answering phone calls in mixed GSM/UMTS network.
My P3600 works fine when the display shows 3G Network. Answering a call works fine by pressing the left phone button. The display closes the caller bubble and switches to the connected status and shows caller and time and so on. But every time the phone is connected to only GSM radio station - display shows "G" beside the antenna icon i cannot answer a single call. Pressing the left phone button results in showing the white bubble with caller information and nothing happens - the call doesnt start the calling party always hear the normal beep tone while waiting for pick up of the phone. In this circumstances i cannot hear anything from speaker and also cannot end the call by pressing the right phone button (hangup) - the software of the P3600 stops responding and the caller bubble is frozen at the display. When the call is discontinued by the caller the P3600 resets to normal activity waiting for a call and showing a missed call !! This happens at every GSM call - about 10 t! imes since yesterday !! It is very important for me that i can answer calls in both network connection modes because the austrian provider A1/Vodafone has mixed environment all over the country. The receipton of GSM while the problem comes up is always more than 2 or 3 bars on antenna display.
Hope that there is some possible solution for this problem.
ROM Software Version is:
1.16.407.2 (German)
Setting for network provider is:
Automatic
Band selection is:
Auto
Auto
Many thanks in advance !!
Gerhard from Austria
----->The answer from HTC was:
Hello
This seems to be a very strange issue that you are experiencing and something that we have not heard of before.
Does this occur every time that you receive a call in a non-3G area?
I would recommend that you perform a Hard Reset on the device. This will restore the device back to the factory software settings. This will also remove all settings, contact , calendar information as well as any files and SMS.
Once this has been performed I would ask you to test if this has resolved your issue. If this has then you should experience no more issues. If this does not solve your issue then I would recommend that you contact your local repair center, details below, to arrange a repair of your device.
+ 43 (0) 508115555
[email protected] <mailto:[email protected]>
Yours sincerely
Dan Mackie
[email protected]
http://www.htc.com
----->The Hardreset does not fix the problem :-(
Still waiting for a firmware upgrade ....
Gerhard
Since Uprade to Radio ROM 1.41.00.11 (http://forum.xda-developers.com/showthread.php?t=304006) i have no more problems with answering phone calls !!!
Hope the Radio ROM will be included in an official ROM Upgrade from HTC soon.
Gerhard
Hi there,
I have a problem. 2 days ago i put android on my HD2 and it worked perfectly but now i can't recieve calls or make any calls. If i want to make a call he put auto. 011 in the phone number and than it says 'services is not available' but i can text the person but not call them. When i boot my windows mobile os i can make calls and recieve so thats strange. My radio version is 2.0.12 and i put the newest android os on my phone.
Slagers said:
Hi there,
I have a problem. 2 days ago i put android on my HD2 and it worked perfectly but now i can't recieve calls or make any calls. If i want to make a call he put auto. 011 in the phone number and than it says 'services is not available' but i can text the person but not call them. When i boot my windows mobile os i can make calls and recieve so thats strange. My radio version is 2.0.12 and i put the newest android os on my phone.
Click to expand...
Click to collapse
when you try to call someone , the device automatically adds 011 to the # ?
It's a setting you can enable/disable in the settings. I'm sorry I cant advise you ATM as
I'm not running android,I'm using WinMo, But i remember that it was " Add Country code or prefix to Numbers " or something like this, just disable it .
But others should be able to call you normally, as their phones doesn't add prefix.
Hope others can help you
Hi kawazaki,
Thanks for the response, but if other people call me they here the dailing note. But my phone isnt responding on that so i can't see that some1 is calling me. And if i boot in WinMo i can recieve calls and make calls (strange)?
Some1 help me
*Maybe i found something but i can;t change it (AAAH) Maybe you guys can help. I found some call settings named:
Call barring settings Then i see All outgoing (Disabled) All incoming (Disabled) than i want to change it in enable but i requires a password :S
Please help im desperate
samething just happened to both me and my friend's hd2s on android,,he told me all he did was take out the battery and as soon as the phone boots,,make a call,,i tried it in mine nd chi ching,,works!