Related
hello evryone,
sorry if this has been mentioned many times.
i have my beloved HTC TD, with shine 2.4 Full and Radio 05.
i am pleased with it , only missing part is to be able to use VOIP/Sip Calls.
i have been browsing this forums for many pages, and there are many unsolved and unfinished threads about the voip problem in HTC TD.
1. SJphone
2. Sip config tool
3. hidden sip manager
4. wm61voip.cab
i have tryed all, and i havent had luck yet to be able to use my voipbuster account on my phone..
My last phone was a nokia n95, symbian, was soo easy to setup voip and make quality calls, please dont tell me that a windows mobile is that hard to enable sip calls
so has anyone a define working solution for voip/sip on HTC TD? or is this half dead topic for now?
thanx
Sonic
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Hi Sonic,
I'm using SJPhone without any trouble with a Justvoip account (another Finarea voip, like VoipBuster).
I give you how I did the configuration for it:
On General, in name you put VoipBuster, Type SIP Proxy
Iniatialization: mark all in account and password
SIP Proxy: Proxy domain: sip.voipbuster.com, port 5060; User domain (your username). Mark Register with proxy and Proxy is strict outbound
on the last tab (stun) put in server address: stun.voipbuster.com with port 3478
And that's all. You need to have credit in your voipbuster account. You must put the password in the 1st time use in your SJPhone.
Cheers,
Gonzalo
sidd said:
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Click to expand...
Click to collapse
Hi SID! thank you so very much for the guide, ill try it later tonite, when im finished doin my job. ill let you know.
Sonic
tanghetto said:
Hi Sonic,
I'm using SJPhone without any trouble with a Justvoip account (another Finarea voip, like VoipBuster).
I give you how I did the configuration for it:
On General, in name you put VoipBuster, Type SIP Proxy
Iniatialization: mark all in account and password
SIP Proxy: Proxy domain: sip.voipbuster.com, port 5060; User domain (your username). Mark Register with proxy and Proxy is strict outbound
on the last tab (stun) put in server address: stun.voipbuster.com with port 3478
And that's all. You need to have credit in your voipbuster account. You must put the password in the 1st time use in your SJPhone.
Cheers,
Gonzalo
Click to expand...
Click to collapse
Hmm really? i thought i tried SJphone last week, and i set it up. but it just keep saying couldnt find network or connect.
or somethign network related problem. ill try your guide once more time soon, and ill let you know.
SJphone should work on 3g connection aswell right? not only wifi.
Sonic
sidd said:
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Click to expand...
Click to collapse
hey mate, so far so good, i have done everythig in the steps.
only problem is the
12. Start > Setting > Today > Items TAB > TICK-ON "Internet Calling"
my today screen doesnt show any of those extra item i can add. only touchflow 3d. and call history and calender. is it because the shine 2.4 is limited to show morE? or how can i add more on today screen.
thanx
okey i turned off the tf3d and then i was able to see the voip: no service.,
it keeps saying no service. hmm. i am on 3g. can i force it connect somehow?
Sonic
hmm okey here is somethig funny,
i started opera to force my phone to use 3g data., and voila, the internetcalls: sip said available. like it logged into it. then i click on it and it said selected.
then i choose contact and tryed to call, it gave me error:
cannot complete the call. the signal may be unavailbe or the phone number may not be valid please try again.
i have the +45andphonenumber when i call.
hmm
Sonic
p.s i can definetly see that the GPS is completly broken now. it cant catch anything.
its a lost cause really. i have been reading about it.
and its too much hassle, unfortunatly. and it also says that when installing wm6voip it wil mess up the gps. and i need the gps so.,
im gonna skip voip on htc for now. untill maybe a proper solution comes out.
i might try SJpone with wifi sometime. but im gonna uninstall all the voip drivers now and hope that i can get my gps running,
thanx for the help Sidd. i appericiate it.
Sonic
SonicSpinner said:
its a lost cause really. i have been reading about it.
and its too much hassle, unfortunatly. and it also says that when installing wm6voip it wil mess up the gps. and i need the gps so.,
im gonna skip voip on htc for now. untill maybe a proper solution comes out.
i might try SJpone with wifi sometime. but im gonna uninstall all the voip drivers now and hope that i can get my gps running,
thanx for the help Sidd. i appericiate it.
Sonic
Click to expand...
Click to collapse
Hi Sonic,
That is such a shame as you have already decided to quit VOIP on your device.
If you follow the instructions as it is then there is no doubt that it wouldn't work, as I have HARD-Reseted my Diamond 4 times since I have got this procedure and everytime I am going through the same procedure and everytime VOIP & TomTom GPS really works.
And yes on 3G & HSDPA connection as well as WiFi (obviously Wifi is much faster & clearer all the time)
For the issue of TODAY entry you have to use the application "2nd Today" (http://forum.xda-developers.com/showthread.php?t=401907)(I can't send you the screenshot as my Diamond is off for replacement for the bloody short battery life)
Actually 2nd Today will change one of the soft key on the main/Home Tf3D screen to your defined word e.g. VOIP, once you click that soft button, the TF3D will hide and you would see your normal Today screen, on this screen you have another Soft Button to go back to TF3D. Simple
For the issue of making a call some VOIP providers indicate to attach a "9" before the number to let the provider understand that you are calling from a handheld device not from PC (e.g. actual number 555666333, Dialing number from handheld 9555666333), check your VOIP provider thay must say something regarding this.
Anyway GoodLuck
Sid
sidd said:
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Attached Files Procedure.txt
01-WM6VoIP-cab.CAB
02-VOIP Drivers-cab.cab
destr0_VOIP_WM61___SIP_Config_1.1.zip
Click to expand...
Click to collapse
I made All-in-one
trying the all in one solution
Kinda dislike sjphone because it cant properly access the phone's contacts...and audio quality isnt fantastic
sidd said:
Hi Sonic,
That is such a shame as you have already decided to quit VOIP on your device.
If you follow the instructions as it is then there is no doubt that it wouldn't work, as I have HARD-Reseted my Diamond 4 times since I have got this procedure and everytime I am going through the same procedure and everytime VOIP & TomTom GPS really works.
And yes on 3G & HSDPA connection as well as WiFi (obviously Wifi is much faster & clearer all the time)
For the issue of TODAY entry you have to use the application "2nd Today" (http://forum.xda-developers.com/showthread.php?t=401907)(I can't send you the screenshot as my Diamond is off for replacement for the bloody short battery life)
Actually 2nd Today will change one of the soft key on the main/Home Tf3D screen to your defined word e.g. VOIP, once you click that soft button, the TF3D will hide and you would see your normal Today screen, on this screen you have another Soft Button to go back to TF3D. Simple
For the issue of making a call some VOIP providers indicate to attach a "9" before the number to let the provider understand that you are calling from a handheld device not from PC (e.g. actual number 555666333, Dialing number from handheld 9555666333), check your VOIP provider thay must say something regarding this.
Anyway GoodLuck
Sid
Click to expand...
Click to collapse
Hey sidd,
thanx, your words really sound like its working. with the number 9, i didnt know about. which means i have to add 9. infront of every number i use. okey well i only want to call to few numbers anyways.
im using internetcalls.com same voipcheap or voipbuster, havent read anythign about it though,
but i will try yoursolution again later this weekk
thanx again
Sonic
OS-ZloyMuh said:
I made All-in-one
Click to expand...
Click to collapse
Tested. Works a treat.
It's just that sometimes, it doesn't detect when I get connected to the wifi, I have to turn internet call off and then reset it on 'whenever available' for it to sense that the phone is connected to the internet.
OS-ZloyMuh said:
I made All-in-one
Click to expand...
Click to collapse
Hi OS-ZloyMuh,
Thanks so much for that but I have one question, have you made this CAB according to the procedure I have posted earlier like 1,2,then 3 overwrite?
Please explain as it could be a big help.
Regards
Sid
SonicSpinner said:
its a lost cause really. i have been reading about it.
and its too much hassle, unfortunatly. and it also says that when installing wm6voip it wil mess up the gps. and i need the gps so.,
im gonna skip voip on htc for now. untill maybe a proper solution comes out.
i might try SJpone with wifi sometime. but im gonna uninstall all the voip drivers now and hope that i can get my gps running,
thanx for the help Sidd. i appericiate it.
Sonic
Click to expand...
Click to collapse
I have VOIP running on my Diamond from day one while using GPS in Ozi, TomTom, TrackMe and other software as you can see from attached Today screen also VOIP is active. The trick is that you need to kill one file after installing VOIP. This file DNSapi.dll is preventing you to use your GPS. After deleting it and soft reset it will create automatically a new DNSapi.dll and all will be well.
Do the following after you have VOIP installed and working. (and your GPS is killed)
In your Today screen set Internet calling OFF
Soft reset
Use file explorer or Total Commander to delete DNSapi.dll
Soft reset
Switch Internet Calling ON
Ready.
Finally! GPS stays working! Howeverrrrrrrrr... Unlike the other version of the VoIP cab I used, this one let's the sound go over the EXTERNAL speaker... and that sucks balls... (Sorry for my choice of words ) Everyone can hear what I hear...
In other words... How do I fix this? VoIP over the internal speaker AND let GPS work...
I seem to be having problems calling mobiles... Everything else works fine, including GPS...
Can I change something in the dialplan to make it work? if so, what?
dubdeckerbuss said:
I seem to be having problems calling mobiles... Everything else works fine, including GPS...
Can I change something in the dialplan to make it work? if so, what?
Click to expand...
Click to collapse
You have to keep the Today Voip plugin as "Available", you have to only click and "Selected" it once you have to make a VOIP call.
In the situation of "Available" you will still be able to receive the VOIP & normal calls.
In other word, if you will select the voip then you can not use the normal phone.
So keep it on "Available".
Finally! GPS stays working! Howeverrrrrrrrr... Unlike the other version of the VoIP cab I used, this one let's the sound go over the EXTERNAL speaker... and that sucks balls... (Sorry for my choice of words ) Everyone can hear what I hear...
In other words... How do I fix this? VoIP over the internal speaker AND let GPS work...
Click to expand...
Click to collapse
Yes this is the problem and I think there is no solution for that untill unless you try to use a Bluetooth headset (I haven't tried this idea by myself).
Let me know if you try this option.
sidd said:
You have to keep the Today Voip plugin as "Available", you have to only click and "Selected" it once you have to make a VOIP call.
In the situation of "Available" you will still be able to receive the VOIP & normal calls.
In other word, if you will select the voip then you can not use the normal phone.
So keep it on "Available".
Click to expand...
Click to collapse
Sorry, my bad, I didn't explain very well... I understand what you've said above, and of course I only use 'selected' while I want to make a voip call, but when in that state I am unable to make voip calls to mobiles... I get an error telling me the number may be invalid
Hi guys,
I have unlocked my phone and am able to run Android 1.1 from Bootkit 0503 found on this forum. While it runs great with minor issues one thing annoys me a lot.
I cannot log into Marketplace, Calendar, sync contacts etc. because the gmail login prompt always fails. It says there something in the sort of: There's something wrong with your SIM card or connection.
I have the browser working when I enter the APN in defaults.txt in Haret. I have to connect through the modem application in Android first. I have never succeeded to amke the "Togga" application connect to anything. I tried entering the APN in Android itself too, but this doesn't seem to have an effect.
It is really annoying to have working GPRS in Android (I can browser on the web), but the Calendar applications etc. refuse to acknowledge it.
My provider is Telmore in Denmark.
How do you guys make it work?
devnn said:
Hi guys,
I have unlocked my phone and am able to run Android 1.1 from Bootkit 0503 found on this forum. While it runs great with minor issues one thing annoys me a lot.
I cannot log into Marketplace, Calendar, sync contacts etc. because the gmail login prompt always fails. It says there something in the sort of: There's something wrong with your SIM card or connection.
I have the browser working when I enter the APN in defaults.txt in Haret. I have to connect through the modem application in Android first. I have never succeeded to amke the "Togga" application connect to anything. I tried entering the APN in Android itself too, but this doesn't seem to have an effect.
It is really annoying to have working GPRS in Android (I can browser on the web), but the Calendar applications etc. refuse to acknowledge it.
My provider is Telmore in Denmark.
How do you guys make it work?
Click to expand...
Click to collapse
seems like your provider is blocking the port android marketplace / etc are using.... otherwise -> no idea! maybe try a proxy if possible? cant check it since my nike is broken
Sorry I havn't checked back until now.
The problem got obsolete after I bought the HTC Magic where "it just works".
Thanks for responding though.
I am sorry to post this irrelevant question, but how did you load Android on your touch dual? I would love to do this as well!
Is there a guide for complete newbies somewhere?
I got a build from here:
http://wiki.xda-developers.com/index.php?pagename=Niki_Android
There are links to forum threads which discuss installation.
Hi,
i hope somebody can help me with my activesync error 0x80072F06; it says that the server security certificates are invalid, which i can't understand at all: I have my touch2 connected to my microsoft exchange server 2010 and imported my servers security certificate (which i first exported on my desktop using internet explorer). At first i tried to sync the phone at home by wifi and entered my servers local IP -> worked exactly as i should.
But as soon as i enter my external ip my certificate it doesnt work anymore and gives me the above error...
But i don't understand why i can successfully sync the phone the first time after i entered the settings and also the first time every day when the exchange server/the phone try to connect (some minutes after midnight) it works, but why not always?
I hope i could give you enough information to help me solve my problem.
saw45
I've always been able to sync without a security certificate...I don't know if this is related at all, but you can try this: http://www.mobilitydigest.com/forums/showthread.php?t=259&highlight=exchange+security
Thanks a lot, would be really great, but sadly it doesn't work under windows mobile 6.5... i tried to install the version for windows mobile 6.1 professional but it always gives me an error (unexpected error in stay config.exe) when i try to save the settings... (although i installed the 2.0 version)
is there any other way (maybe a registry setting) to disable the certificates?
thank you for your help,
saw45
can you try changing the connection speed?
mine is in dutch, but it must be something like:
settings-->connections-->USB to PC-->uncheck the option for a faster connection.
Hi,
i'm not connecting to a local pc over usb so i don't think i can change the connection speed as i'm connecting to an exchange server over umts/hsdpa/3g or wifi... I hope that was what you ment?
Thanks for your help!
saw45
Hey Saw,
Did you import the certificate with an .P7B extention? I also tried the DER encoded binary and the Base-64 encoded (both .CER). But the Cryptographic message syntax standard was the one that worked for me.
saw45 said:
Hi,
i'm not connecting to a local pc over usb so i don't think i can change the connection speed as i'm connecting to an exchange server over umts/hsdpa/3g or wifi... I hope that was what you ment?
Thanks for your help!
saw45
Click to expand...
Click to collapse
oops, than you can disregard my idea ;-)
Hi,
which way did you export your certificate/ which program did you use?
Thank you for your help, i hope this is going to solve the problem! But if its not, nobody has an idea how to turn off windows mobile asking for valid certificates?
saw45
ok i imported now the certificate in cryptographic message syntax standard (.p7b) but it didn't change anything
I really don't know what to do... ironically the perfect exchange integration was one of the points why i decided to buy a windows mobile based phone
i don't really understand why it works at 00:01 and then the phone decides that the certificate isn't valid?? When i start the phone at 2 pm the first time (that day) it also works!? But after the first sync no matter what i do it won't work again!
I really hope somebody can help me!
saw45
edit: sorry for repost
hi all,
i ve configured my omnia for pop3, everything fine. Problem is i dont see the emails from internal sent via excahnge, so i decided to activate exchange webmail.
webmail is working fine from opera from the i8000, but i dont get it working with the normal outlook feature. It always says synchronizing error / fault.
SSL is not activated, i am pretty sure i ve entered all information correctly.
i tried several times, but always with same result.
what do i forget or is there anything special to do?
the only thing i really noticed: my webmail is
---https://webmail.xxxxx.com/exchange----
(the --- is only so its not recognized as link)
the problem: if i type this where the server adress should be, it always changes to:
---webmail.xxxxx.com---
PLS HELP ME! ;-)
tyvm
Daniel
Hello,
I've just flashed the WP7-ROM for the HD2... everythings works fine till now, but I cannot connect with Exchange (there is a problem with the certificate).
But my HD7 works fine with the same Certificate... has anyone the same problem... or has anyone get exchange working?
I'm having this problem also. Does anyone have solution for this?
Mine works fine..
Checkout the time of the phone.
funky81 said:
I'm having this problem also. Does anyone have solution for this?
Click to expand...
Click to collapse
Shutdown und restart the phone... after that it works on my hd2
TMo US 3G Not working on HD2 after WP7
Hi Everyone,
I have just flashed my htc hd2 with WP7 rom.
Things are looking good.. the only problem is my tmobile 3g/data connection is not working. Can anyone help me here ?
rdashora said:
Hi Everyone,
I have just flashed my htc hd2 with WP7 rom.
Things are looking good.. the only problem is my tmobile 3g/data connection is not working. Can anyone help me here ?
Click to expand...
Click to collapse
Hi rdashora, under settings, Cellular you need to edit and enter the APN for for your service provider. You may need to search online for the correct string.
Exchange worked fine on my end...i must say that this has to be the best exchange capable Os out there. My work emails render as faithfully as they do on my desktop
Thanks, it works
rdashora said:
Hi Everyone,
I have just flashed my htc hd2 with WP7 rom.
Things are looking good.. the only problem is my tmobile 3g/data connection is not working. Can anyone help me here ?
Click to expand...
Click to collapse
Why have you posted this question in this thread?
Unfortunately, unlike iOS and Android, WP7, like WinMo before it, still does not accept unsigned certificates.
With iOS and Android, you can choose to accept te unsigned cert after viewing a warning. Microsoft still don't allow this.
To get it working you have to setup an email account that works (gmail/hotmail) and email yourself the root certificate for the exchange domain. You can then install on the device from the email. After that, you can now attach to you Exchange server.
It's a bit of a hassle and one that there's really no reason not to support along with the appropriate warnings.
worked data connection
The answer was given,
Enter cellular menu. there, add "APN" option is available. Enter here your own countrymen, the GSM operator information...
I worked very well. but too bad the app to be paid.
I still say android2.3 much better operating system.
Hello:
i have another problem related to exchange the user name name of my account has two word as "name surname". When I tried to configurate my excahnge account I cannot introduce any space on the username field.
Does anybody know any trick to solve the problem?
Any registry key to change where user name is stored? As know the automatic system of WP7 detected my username as the first part of my e-mail address (ex. [email protected] the user name detected is name.surname instead of name surname)
Any trick to force the keyboard to write spaces?
If I do not find a solution I will have to come back to 6.5 as I need my HD2 for work.
thanks in advance for your help.
romperstomper said:
Unfortunately, unlike iOS and Android, WP7, like WinMo before it, still does not accept unsigned certificates.
With iOS and Android, you can choose to accept te unsigned cert after viewing a warning. Microsoft still don't allow this.
To get it working you have to setup an email account that works (gmail/hotmail) and email yourself the root certificate for the exchange domain. You can then install on the device from the email. After that, you can now attach to you Exchange server.
It's a bit of a hassle and one that there's really no reason not to support along with the appropriate warnings.
Click to expand...
Click to collapse
lol, whats all that about, most people set up their exchange email etc with no problems what so ever, i didnt?
kata said:
Hello:
i have another problem related to exchange the user name name of my account has two word as "name surname". When I tried to configurate my excahnge account I cannot introduce any space on the username field.
Does anybody know any trick to solve the problem?
Any registry key to change where user name is stored? As know the automatic system of WP7 detected my username as the first part of my e-mail address (ex. [email protected] the user name detected is name.surname instead of name surname)
Any trick to force the keyboard to write spaces?
If I do not find a solution I will have to come back to 6.5 as I need my HD2 for work.
thanks in advance for your help.
Click to expand...
Click to collapse
That is weird, you say ur username has a space in it? I didnt think that was possible??? I would contact ur IT dept on that one.
Yes, my user name has a space in it. but not just mine also all the rest of my organization. Everybody gets the user name as 'name surname'. I already contact IT department and they told me they will not change nothing for security policy.
I have had 5 windows mobile phone, 3 androids and several symbian and I never got any problem, it was always possible to wirte my user name with the space. :-(
Hi, I'm having the same problem now. I was running either BOYPPCs or HD2Os (i can't remember) NODO rom and I could sync with my companies exchange no problems. However I installed the mango beta yesterday and now I have a certificate error, I tried going back to XBMODs nodo rom and it didn't work either. I know all these roms come from the same base, but could there be different certificates floating around?