hello evryone,
sorry if this has been mentioned many times.
i have my beloved HTC TD, with shine 2.4 Full and Radio 05.
i am pleased with it , only missing part is to be able to use VOIP/Sip Calls.
i have been browsing this forums for many pages, and there are many unsolved and unfinished threads about the voip problem in HTC TD.
1. SJphone
2. Sip config tool
3. hidden sip manager
4. wm61voip.cab
i have tryed all, and i havent had luck yet to be able to use my voipbuster account on my phone..
My last phone was a nokia n95, symbian, was soo easy to setup voip and make quality calls, please dont tell me that a windows mobile is that hard to enable sip calls
so has anyone a define working solution for voip/sip on HTC TD? or is this half dead topic for now?
thanx
Sonic
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Hi Sonic,
I'm using SJPhone without any trouble with a Justvoip account (another Finarea voip, like VoipBuster).
I give you how I did the configuration for it:
On General, in name you put VoipBuster, Type SIP Proxy
Iniatialization: mark all in account and password
SIP Proxy: Proxy domain: sip.voipbuster.com, port 5060; User domain (your username). Mark Register with proxy and Proxy is strict outbound
on the last tab (stun) put in server address: stun.voipbuster.com with port 3478
And that's all. You need to have credit in your voipbuster account. You must put the password in the 1st time use in your SJPhone.
Cheers,
Gonzalo
sidd said:
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Click to expand...
Click to collapse
Hi SID! thank you so very much for the guide, ill try it later tonite, when im finished doin my job. ill let you know.
Sonic
tanghetto said:
Hi Sonic,
I'm using SJPhone without any trouble with a Justvoip account (another Finarea voip, like VoipBuster).
I give you how I did the configuration for it:
On General, in name you put VoipBuster, Type SIP Proxy
Iniatialization: mark all in account and password
SIP Proxy: Proxy domain: sip.voipbuster.com, port 5060; User domain (your username). Mark Register with proxy and Proxy is strict outbound
on the last tab (stun) put in server address: stun.voipbuster.com with port 3478
And that's all. You need to have credit in your voipbuster account. You must put the password in the 1st time use in your SJPhone.
Cheers,
Gonzalo
Click to expand...
Click to collapse
Hmm really? i thought i tried SJphone last week, and i set it up. but it just keep saying couldnt find network or connect.
or somethign network related problem. ill try your guide once more time soon, and ill let you know.
SJphone should work on 3g connection aswell right? not only wifi.
Sonic
sidd said:
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Click to expand...
Click to collapse
hey mate, so far so good, i have done everythig in the steps.
only problem is the
12. Start > Setting > Today > Items TAB > TICK-ON "Internet Calling"
my today screen doesnt show any of those extra item i can add. only touchflow 3d. and call history and calender. is it because the shine 2.4 is limited to show morE? or how can i add more on today screen.
thanx
okey i turned off the tf3d and then i was able to see the voip: no service.,
it keeps saying no service. hmm. i am on 3g. can i force it connect somehow?
Sonic
hmm okey here is somethig funny,
i started opera to force my phone to use 3g data., and voila, the internetcalls: sip said available. like it logged into it. then i click on it and it said selected.
then i choose contact and tryed to call, it gave me error:
cannot complete the call. the signal may be unavailbe or the phone number may not be valid please try again.
i have the +45andphonenumber when i call.
hmm
Sonic
p.s i can definetly see that the GPS is completly broken now. it cant catch anything.
its a lost cause really. i have been reading about it.
and its too much hassle, unfortunatly. and it also says that when installing wm6voip it wil mess up the gps. and i need the gps so.,
im gonna skip voip on htc for now. untill maybe a proper solution comes out.
i might try SJpone with wifi sometime. but im gonna uninstall all the voip drivers now and hope that i can get my gps running,
thanx for the help Sidd. i appericiate it.
Sonic
SonicSpinner said:
its a lost cause really. i have been reading about it.
and its too much hassle, unfortunatly. and it also says that when installing wm6voip it wil mess up the gps. and i need the gps so.,
im gonna skip voip on htc for now. untill maybe a proper solution comes out.
i might try SJpone with wifi sometime. but im gonna uninstall all the voip drivers now and hope that i can get my gps running,
thanx for the help Sidd. i appericiate it.
Sonic
Click to expand...
Click to collapse
Hi Sonic,
That is such a shame as you have already decided to quit VOIP on your device.
If you follow the instructions as it is then there is no doubt that it wouldn't work, as I have HARD-Reseted my Diamond 4 times since I have got this procedure and everytime I am going through the same procedure and everytime VOIP & TomTom GPS really works.
And yes on 3G & HSDPA connection as well as WiFi (obviously Wifi is much faster & clearer all the time)
For the issue of TODAY entry you have to use the application "2nd Today" (http://forum.xda-developers.com/showthread.php?t=401907)(I can't send you the screenshot as my Diamond is off for replacement for the bloody short battery life)
Actually 2nd Today will change one of the soft key on the main/Home Tf3D screen to your defined word e.g. VOIP, once you click that soft button, the TF3D will hide and you would see your normal Today screen, on this screen you have another Soft Button to go back to TF3D. Simple
For the issue of making a call some VOIP providers indicate to attach a "9" before the number to let the provider understand that you are calling from a handheld device not from PC (e.g. actual number 555666333, Dialing number from handheld 9555666333), check your VOIP provider thay must say something regarding this.
Anyway GoodLuck
Sid
sidd said:
Hi Sonic,
I have finally managed to make VOIP possible to work on my TouchD, I dont exactly remember the actual post but I will say that all the credit goes to the XDA Developer forum who has got some decent people eager to help.
Basically my problem was the TomTom's GPS com port was getting engage whenever VOIP was enabled, but finally solved the problem.
Procedure and necessary files attached (You have to only download Resco Explorer)(http://www.resco.net/pocketpc/explorer/default.asp)
Let me know please.
Regards
Sid
Attached Files Procedure.txt
01-WM6VoIP-cab.CAB
02-VOIP Drivers-cab.cab
destr0_VOIP_WM61___SIP_Config_1.1.zip
Click to expand...
Click to collapse
I made All-in-one
trying the all in one solution
Kinda dislike sjphone because it cant properly access the phone's contacts...and audio quality isnt fantastic
sidd said:
Hi Sonic,
That is such a shame as you have already decided to quit VOIP on your device.
If you follow the instructions as it is then there is no doubt that it wouldn't work, as I have HARD-Reseted my Diamond 4 times since I have got this procedure and everytime I am going through the same procedure and everytime VOIP & TomTom GPS really works.
And yes on 3G & HSDPA connection as well as WiFi (obviously Wifi is much faster & clearer all the time)
For the issue of TODAY entry you have to use the application "2nd Today" (http://forum.xda-developers.com/showthread.php?t=401907)(I can't send you the screenshot as my Diamond is off for replacement for the bloody short battery life)
Actually 2nd Today will change one of the soft key on the main/Home Tf3D screen to your defined word e.g. VOIP, once you click that soft button, the TF3D will hide and you would see your normal Today screen, on this screen you have another Soft Button to go back to TF3D. Simple
For the issue of making a call some VOIP providers indicate to attach a "9" before the number to let the provider understand that you are calling from a handheld device not from PC (e.g. actual number 555666333, Dialing number from handheld 9555666333), check your VOIP provider thay must say something regarding this.
Anyway GoodLuck
Sid
Click to expand...
Click to collapse
Hey sidd,
thanx, your words really sound like its working. with the number 9, i didnt know about. which means i have to add 9. infront of every number i use. okey well i only want to call to few numbers anyways.
im using internetcalls.com same voipcheap or voipbuster, havent read anythign about it though,
but i will try yoursolution again later this weekk
thanx again
Sonic
OS-ZloyMuh said:
I made All-in-one
Click to expand...
Click to collapse
Tested. Works a treat.
It's just that sometimes, it doesn't detect when I get connected to the wifi, I have to turn internet call off and then reset it on 'whenever available' for it to sense that the phone is connected to the internet.
OS-ZloyMuh said:
I made All-in-one
Click to expand...
Click to collapse
Hi OS-ZloyMuh,
Thanks so much for that but I have one question, have you made this CAB according to the procedure I have posted earlier like 1,2,then 3 overwrite?
Please explain as it could be a big help.
Regards
Sid
SonicSpinner said:
its a lost cause really. i have been reading about it.
and its too much hassle, unfortunatly. and it also says that when installing wm6voip it wil mess up the gps. and i need the gps so.,
im gonna skip voip on htc for now. untill maybe a proper solution comes out.
i might try SJpone with wifi sometime. but im gonna uninstall all the voip drivers now and hope that i can get my gps running,
thanx for the help Sidd. i appericiate it.
Sonic
Click to expand...
Click to collapse
I have VOIP running on my Diamond from day one while using GPS in Ozi, TomTom, TrackMe and other software as you can see from attached Today screen also VOIP is active. The trick is that you need to kill one file after installing VOIP. This file DNSapi.dll is preventing you to use your GPS. After deleting it and soft reset it will create automatically a new DNSapi.dll and all will be well.
Do the following after you have VOIP installed and working. (and your GPS is killed)
In your Today screen set Internet calling OFF
Soft reset
Use file explorer or Total Commander to delete DNSapi.dll
Soft reset
Switch Internet Calling ON
Ready.
Finally! GPS stays working! Howeverrrrrrrrr... Unlike the other version of the VoIP cab I used, this one let's the sound go over the EXTERNAL speaker... and that sucks balls... (Sorry for my choice of words ) Everyone can hear what I hear...
In other words... How do I fix this? VoIP over the internal speaker AND let GPS work...
I seem to be having problems calling mobiles... Everything else works fine, including GPS...
Can I change something in the dialplan to make it work? if so, what?
dubdeckerbuss said:
I seem to be having problems calling mobiles... Everything else works fine, including GPS...
Can I change something in the dialplan to make it work? if so, what?
Click to expand...
Click to collapse
You have to keep the Today Voip plugin as "Available", you have to only click and "Selected" it once you have to make a VOIP call.
In the situation of "Available" you will still be able to receive the VOIP & normal calls.
In other word, if you will select the voip then you can not use the normal phone.
So keep it on "Available".
Finally! GPS stays working! Howeverrrrrrrrr... Unlike the other version of the VoIP cab I used, this one let's the sound go over the EXTERNAL speaker... and that sucks balls... (Sorry for my choice of words ) Everyone can hear what I hear...
In other words... How do I fix this? VoIP over the internal speaker AND let GPS work...
Click to expand...
Click to collapse
Yes this is the problem and I think there is no solution for that untill unless you try to use a Bluetooth headset (I haven't tried this idea by myself).
Let me know if you try this option.
sidd said:
You have to keep the Today Voip plugin as "Available", you have to only click and "Selected" it once you have to make a VOIP call.
In the situation of "Available" you will still be able to receive the VOIP & normal calls.
In other word, if you will select the voip then you can not use the normal phone.
So keep it on "Available".
Click to expand...
Click to collapse
Sorry, my bad, I didn't explain very well... I understand what you've said above, and of course I only use 'selected' while I want to make a voip call, but when in that state I am unable to make voip calls to mobiles... I get an error telling me the number may be invalid
Related
Hi all,
Just a short 'FYI': I've installed the PPC2003SE version of the SJPhone client on my wizard (my provider just introduced a voip service), and it seems to work just fine. Quality is fine, much better than Skype (although I haven't tried the new beta from Skype yet).
Greets,
David
dafit said:
Hi all,
Just a short 'FYI': I've installed the PPC2003SE version of the SJPhone client on my wizard (my provider just introduced a voip service), and it seems to work just fine. Quality is fine, much better than Skype (although I haven't tried the new beta from Skype yet).
Greets,
David
Click to expand...
Click to collapse
10x, will definitely give it a try,
a link for SJPhone:
http://sjlabs.com/sjp.html
naughty said:
dafit said:
Hi all,
Just a short 'FYI': I've installed the PPC2003SE version of the SJPhone client on my wizard (my provider just introduced a voip service), and it seems to work just fine. Quality is fine, much better than Skype (although I haven't tried the new beta from Skype yet).
Greets,
David
Click to expand...
Click to collapse
10x, will definitely give it a try,
a link for SJPhone:
http://sjlabs.com/sjp.html
Click to expand...
Click to collapse
whoa!! this works so [email protected]!
this is a major kick in SKYPE's butt, as they claim 200mhz on wizard is not powerful enough..
guys GO FOR IT!!
Could you please explain how to configure SJPhone for a VoIP-Account?
My Wizard is online with WIFI behind a AP and FritzBox. But there's only one way sound. Means, the other side is able to hear me but other way round there's no noise...
Hope you understand me :?
do you guys know if there's a way to set up the phone and sjphone so I could use it as a normal phone and not a speakerphone?
thanks
a
I am also looking for Sip config.
I have my own provider and thus I cannot have it work.
I get a 480 error all the time.
Thanks
I have downloaded the version succesfully on my .
I use at my home
How to implement and to use now on my. Anybody knows??
This software doesn't support Skype calls, correct?
SjPhone is a great app, I use it every day to call .
To use it you will basically need the parameters from you service (voipbuster, netappel, etc.) and of course your username + passwd
For different settings you can check:
http://www.voip-info.org/wiki/
For example for voipbuster create a new profile in Options, then just enter :
sip server : sip1.voipbuster.com
domain : voipbuster.com
stun server : stun.voipbuster.com (I also check the send discovered IP in the STUN tab)
Then click ok, and enter your username+passwd and check "Store blablabla..."
Voila
Oh cool, just trying to play with this... but how do you guys answer? When it rings I get a notification window, but with no options and thus can't answer unless I use the "Auto-accept calls" feature...
CJSnet said:
This software doesn't support Skype calls, correct?
Click to expand...
Click to collapse
Anyone?
kilrah said:
Oh cool, just trying to play with this... but how do you guys answer? When it rings I get a notification window, but with no options and thus can't answer unless I use the "Auto-accept calls" feature...
Click to expand...
Click to collapse
This is a known issue but they said that it will be fixed in theWM5 compatible release.
The current one is 2003SE compatible.
So we must have patience
CJSnet said:
CJSnet said:
This software doesn't support Skype calls, correct?
Click to expand...
Click to collapse
Anyone?
Click to expand...
Click to collapse
No, it does not support SPYke.
SPYke have their own protocol (not public), whereas SJPhone is based on the public protocols (SIP, IAX).
kelu said:
SjPhone is a great app, I use it every day to call .
To use it you will basically need the parameters from you service (voipbuster, netappel, etc.) and of course your username + passwd
For different settings you can check:
http://www.voip-info.org/wiki/
For example for voipbuster create a new profile in Options, then just enter :
sip server : sip1.voipbuster.com
domain : voipbuster.com
stun server : stun.voipbuster.com (I also check the send discovered IP in the STUN tab)
Then click ok, and enter your username+passwd and check "Store blablabla..."
Voila
Click to expand...
Click to collapse
any chance of a detailed seup guide from you for us voip newbies please? I'd love to get this one going.....
CHeers
Ed
p.s. for me, i only need to do pc to ppc calls and ppc to pc -do i need a commercial voip account for this?
ed.dark said:
kelu said:
sip server : sip1.voipbuster.com
domain : voipbuster.com
stun server : stun.voipbuster.com (I also check the send discovered IP in the STUN tab)
Then click ok, and enter your username+passwd and check "Store blablabla..."
Voila
Click to expand...
Click to collapse
any chance of a detailed seup guide from you for us voip newbies please? I'd love to get this one going.....
CHeers
Ed
p.s. for me, i only need to do pc to ppc calls and ppc to pc -do i need a commercial voip account for this?
Click to expand...
Click to collapse
first you need an account on their network (netappel, voipbuster and others belong all to sipdiscount.com).
So download the voipbuster app on your PC from www.voipbuster.com, install it, then create an account. This step is necessary to create an account for your PPC later.
Now download SJPhone
http://www.sjlabs.com/softphone/SJphone-PPC2003SE-303c.exe
and install it on your PPC via ActiveSync or whatever (you launch the exe on your computer while the PPC is conected )
After install discaonnect your PPC from the PC, enable wi-fi, connect to the internet and then launch SJPhone from your PCC StartMenu -> Programs.
Then go in the Menu to Options and chose the Profiles tab and click on new. Give it a name like voipbuster, click ok and the intput the settings above in the SIP Proxy tab and the STUN tab.
Then click ok and your ready to ... make calls on the free destinations.
If you wanna be called or to call more destinations, add some credit to your account by logging in with your username and passwd on www.voipbuster.com from your PC.
After adding credit you can also have an inbound number for the others to call you.
Good luck
SJphone button assignment for accepting/rejecting calls
kelu said:
kilrah said:
Oh cool, just trying to play with this... but how do you guys answer? When it rings I get a notification window, but with no options and thus can't answer unless I use the "Auto-accept calls" feature...
Click to expand...
Click to collapse
This is a known issue but they said that it will be fixed in theWM5 compatible release.
The current one is 2003SE compatible.
So we must have patience
Click to expand...
Click to collapse
I also ran into the problem of not being able to answer calls. I partially solved the issue by going to the 'CE Options' tab in the options menu, and assigning other buttons for 'accept' and 'reject' calls. I used the wizard's 'left' and 'right' buttons, as these are situated right next to the 'answer' and 'reject' buttons. This works just fine.
Greets,
David
One cool application is if you have an Avaya IP Office PBX they have a softphone that runs on PPC with WiFI you can connect back to the office.
I'm still playing with it on WM5 but It's been working pretty well.
I installed this on my K-Jam and it seems to work fine apart from a couple of issues. The other party says they can hear themselves as clear and loud as they can hear me. Is there anyway to improve the echo cancellation? Ideally, I would like the voice to be transmitted through the ear piece and not the speakers.
Also, the call gets dropped after about 2 minutes. I'm sitting right next to my router so wifi signal is strong. Does anyone else exprience this dropping of calls? Also, after the call is dropped I cannot initiate another call unless I close SJphone and toggle my wifi off and on then restart sjphone. Are others also seeing this?
Accessing numbers from outlook is very slow on my phone too.
Otherwise received voice quality and the voice quality on the receiving end is good.
When is the WM5 version going to be ready?
a WM5 beta version of SJPhone is now available here
It handles screen rotation fine and fixed the incomming call notifcation to work on windows mobile 5.
Nobody seemed to answer my question
Is anybody else getting a bad echo? The other party says they get a bad echo when I call them with SJPhone. I can't get the sound to come from the ear piece only the speakers so I am guessing the other party heres their own voice from the speakers.
What's everyone else doing - using headsets?
Hello,
I follow these instructions to use voipbuster on my htc TyTN (Hermes) and it does not work properly, but as soon as I connect the headphones that comes in the box, the device freezes and does not work at all.
The only way it works, but not very well, is without the headphones, and as you all know, the speaker doesn´t sound very well too, and of course i want some privacy to talk to.
Here are the instructions I followed:
Right click on SJPhone. Select Option menu and then click in Profiles tab. Click on new button, type the name of your profile (i recommend voipbuster) and select Profile "Calls though SIP proxy) and click OK button. A new window appears.
In this new windows click on SIP Proxy tab an fill the following fields: Proxy Domain: sip.voipbuster.com : 5060, User Domain: sip.voipbuster.com; Accept other fields defaults by pressing OK Button.
Finally, Right click on SJPhone and select Restart option. You user id and password will be asked.
This should work for you since it did for me.
Thanks in advance
WM6 VOIP
jumanji1212,
Why don't you use he internal VOIP in stead of SJPhone? It works very good, even with Voipbuster. The only disadvantage is that you can not usernames.
And sorry, I do not know SjPhone very well. Used it ones to check it out.
Good luck
tembares said:
jumanji1212,
Why don't you use he internal VOIP in stead of SJPhone? It works very good, even with Voipbuster. The only disadvantage is that you can not usernames.
And sorry, I do not know SjPhone very well. Used it ones to check it out.
Good luck
Click to expand...
Click to collapse
what is the internal VOIP ??????
thanks for your reply buddy
VOIP
Read it here. For any question, reply.
http://forum.xda-developers.com/showthread.php?t=299950&highlight=ipdailplan.xml
Pufffffffffff, what a mess!!! I don´t understand anything. The fact is I install the very same program on my HTC TyTN and in the qtek 9000 (Univeral), but only works properly on my Universal device, with and without the headphones. But it does not work on my TyTN (Hermes) properly without using the headphones and as soon as I plug the headphones, the TyTN freezes at all.
Both devices have the WM5, and don´t know what can I do.
Sorry for my lack of pda-culture but I have no idea about the link you posted before.
Headphone
Sorry, I can not test how VOIP acts with a headphone. Yesterday I send my TyTN to the repaircenter, because of the screen-alignment-error.
When I get it back, I will test it myself. I will give you my report.
ok, thanks tembares
New config program from Shaun33
jumanji1212 said:
ok, thanks tembares
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=303493
This will configure the WM6 VOIP xml for you. Just input your VOIPbuster info.
I did use it but dont have a SIP account yet.
stukes said:
http://forum.xda-developers.com/showthread.php?t=303493
This will configure the WM6 VOIP xml for you. Just input your VOIPbuster info.
I did use it but dont have a SIP account yet.
Click to expand...
Click to collapse
So,...., Do you thinks with this cab I´ll fix my headphones and the general malfuction problem with SJPhone??? Hope that, and thank you
with WM5, the same problem yet after all. what do you advise???
thanks for your interest
jumanji1212 said:
So,...., Do you thinks with this cab I´ll fix my headphones and the general malfuction problem with SJPhone??? Hope that, and thank you
Click to expand...
Click to collapse
This CAB will get you using the wm6 VOIP software. The bluetooth issue is discussed in another thread. You will have to pipe all of your audio VIA the bluetooth driver. I believe sluth has a fix. I will do some searching for you. Dont let me do all the searching tho
hi all,
I'm a lucky owner of a blackstone since 2 days.
I would like to use voip, i installed wm6voip and setupvoip.
I configured correctly all but i still have "no service".
I have a dell x50v with wm6 too and voip work fine on it.
My HD was sell from french sfr.
Can someone help me ?
sorry for my bad english
anyone to help me ??
What about voip on the hd ??
have a look here
this one works on HD.
6Fg8 said:
have a look here
this one works on HD.
Click to expand...
Click to collapse
Not for me! gives the same problem as the wm voipcab (sound from the rear speaker, and low volume)
Try this one:
Fring!
Works very well on my HD!
jacare said:
Try this one:
Fring!
Works very well on my HD!
Click to expand...
Click to collapse
Tnx! but if i use fring. fring servers will be a proxy for my voip. I dont like that thing!
cobrawnl said:
Tnx! but if i use fring. fring servers will be a proxy for my voip. I dont like that thing!
Click to expand...
Click to collapse
I have a different approach. I load WMWIFIRouter on HD, which creates a Wlan and connect a Netgear Skype Handy to this Wlan.
I knoe it a different way but... just a suggestion.
WALTERPAVESIHTC said:
I have a different approach. I load WMWIFIRouter on HD, which creates a Wlan and connect a Netgear Skype Handy to this Wlan.
I knoe it a different way but... just a suggestion.
Click to expand...
Click to collapse
Wow wow Wow!
i dont get realy what youre meaning. But i think you mean that you are using WMWIFIRouter on your mobile phone to share your 3G internet with your laptop via wifi... and youre using then a sip client at your laptop ...
Great sollution! But i dont want to need my laptop for making a phonecall to my asterisk server
cobrawnl said:
Tnx! but if i use fring. fring servers will be a proxy for my voip. I dont like that thing!
Click to expand...
Click to collapse
Only if you use skype or msn.
I am almost sure that Fring servers will not be a proxy if you use SIP.
jacare said:
Only if you use skype or msn.
I am almost sure that Fring servers will not be a proxy if you use SIP.
Click to expand...
Click to collapse
Hmm, Never mind! I dont like fring.. Have you ever tried the buildin WM6VOIP.cab?
if you see that! you dont ever never jever go back to fring!
cobrawnl said:
Hmm, Never mind! I dont like fring.. Have you ever tried the buildin WM6VOIP.cab?
if you see that! you dont ever never jever go back to fring!
Click to expand...
Click to collapse
I know what you mean..... And yes i've tried
But I can't find a way of putting WM6VOIP.cab working with the normal Earpiece.... Just like Fring do....
hmm you need the speakerswitch ... pm me your mail adress.. i will send it to you
Ok so... I've been using VoIP for a while on the HD and those are my findings:
1) WM6VOIP.CAB messes things up with GPS, eg. you will no longer be able to use GPS nor uninstal voip.cab.. so if you want your HD fully functional (as before the installation of the cab).. you have to Hard Reset!
2) My operator (Wind - Italy) blocks VOIP on their HSDPA/3G line therefore forcing you to use WiFi BUT if you use WIFI normally when the phone turns the display off to save power it also disables WiFi.. ending the call. You have to use then Advanced Config to disable this behaviour (always on mode for WiFi)..
I made also different tests and tried different programs and at the end of the day I found the voip experience with WinMo to be very unpleasant at the point where you gladly pay a bit more to make phone calls the traditional way.. (do not forget that you have a consistent lag while speaking in VOIP)..
Eraser85 said:
Ok so... I've been using VoIP for a while on the HD and those are my findings:
1) WM6VOIP.CAB messes things up with GPS, eg. you will no longer be able to use GPS nor uninstal voip.cab.. so if you want your HD fully functional (as before the installation of the cab).. you have to Hard Reset!
2) My operator (Wind - Italy) blocks VOIP on their HSDPA/3G line therefore forcing you to use WiFi BUT if you use WIFI normally when the phone turns the display off to save power it also disables WiFi.. ending the call. You have to use then Advanced Config to disable this behaviour (always on mode for WiFi)..
I made also different tests and tried different programs and at the end of the day I found the voip experience with WinMo to be very unpleasant at the point where you gladly pay a bit more to make phone calls the traditional way.. (do not forget that you have a consistent lag while speaking in VOIP)..
Click to expand...
Click to collapse
Hi Eraser85,
There is a solution for the GPS problem with wm6voip.cab there is no hard reset required..
for your 3g problem:
Have you tried to uncheck the checkbox "This connections connects with a proxy server" in your connection settings..
That will help a lot when youre trying to call via 3g
the lag issue is a very little problem. When a call is for free i dont have any problems with that
I wanted to bring this workaround into its own thread to make sure that people see the great solution posted by c0rnholio -
http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35
I can confirm that it works and works well despite some initial installation issues.
mate, u can just ask the mods to change the title of the other topic....
AirwolfUK said:
I wanted to bring this workaround into its own thread to make sure that people see the great solution posted by c0rnholio -
http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35
I can confirm that it works and works well despite some initial installation issues.
Click to expand...
Click to collapse
Thanks for your workaround and I managed to get my BB Connect working on my Touch Pro 2 and I am using BIS.
Blackberry Connect is Working on HTC TouchPro2
Dear All,
Rejoice HTC TouchPro2 owners. Blackberry connect for working on HTC Touchpro 2 now. Just follow http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35 this web-link and you will achieve your intentions.
Can't get it working for long on mine
I have followed the instructions given in the link, and can get BBConnect 106 to work on my TP2, but only for a while ...
The BBConnect 106 loads, I get BES connection, email, contacts, calendar, notes and tasks downloaded ... manage to send and receive a few email, then it all stop ... with some very strange behaviour.
I have tried everything I can think of to get it working consistently, but can't manage it. I get the impression that the BBConnect is being loaded some place where it should be ... not very technical I know, but thats the way it appears.
The TP2 I have is a Hong Kong English Language version ... WWE ... not sure if that makes a difference.
ROM and Radio version ...
The version I have on my TP2 are
ROM 1.19.721.3 (51489) WWE
Radio: 3.44.25.27
And to correct my typo in the previous note, I think the BBConnect is being loaded shmewhere it shouldn't be loaded, which is causing other features and functions of the phone to mis-behave ... as an example, I was unable to search for new networks manually ... lost the Roaming flag on the top of the screen (small triangle sign), was always displaying GPRS connection, even when not connected to the network (so E (edge), or G being displayed ...)
I also tried version 104 of the BBconnect, just to see if it was version 106 specific, but this didn't make a difference.
Apart from that, the phone is close to perfect, for me at least ... particularly like the way the screen blanks when you are making a call and put it close to your ear, then comes alive again when you move it away so you can see it and access it. With the TP, I was always putting calls on hold when I put the phone to my ear ... also like the way the speaker phone is activated automatically when you place the phone face down.
Now if I could only get BBConnect to work, it would be perfect
I did get it working, I couldn't get SetModelID.exe to run with the reg string, I have Memmaid that allows you to set programs to run and I put SetModelID.exe in there and I have email!
Question!
Why use BBConnect for emails? What's wrong with the way the emails are already on the HTC? What is the difference exactly?
Just curious because this sounds interesting.
HeavyComponent said:
Question!
Why use BBConnect for emails? What's wrong with the way the emails are already on the HTC? What is the difference exactly?
Just curious because this sounds interesting.
Click to expand...
Click to collapse
My company disables sync with Exchange and I can only get work email with Blackberry service. I think it's a common problem.
Yipee mine works too . only problem is sometimes the BB connect tells me radio blocked or in use especially when i use MSN chat or go online with another application on the phone. is there any option i need to tweak ?
BB CONNECT Messenger?
Can BB Messenger be used with BB Connect?
Windows Mobile 6.5 and BlackBerry Connect
Guys, I would like to hear from someone who understands the 6.6 environment whether you think upgrading into WM 6.5 will allow me to still use the BBerry Connect. has anybody tried upgrading a Rhodium and then try the BBerry?
Quophi said:
Yipee mine works too . only problem is sometimes the BB connect tells me radio blocked or in use especially when i use MSN chat or go online with another application on the phone. is there any option i need to tweak ?
Click to expand...
Click to collapse
rsacipher said:
I did get it working, I couldn't get SetModelID.exe to run with the reg string, I have Memmaid that allows you to set programs to run and I put SetModelID.exe in there and I have email!
Click to expand...
Click to collapse
RSACIPHER: I had same problem. could not change Model ID. What is Memmaid and how did that work?
Also
C0RNHOLIO: maybe you should look into why this is happening so that your solution works all the time. Mine is a T-Mobile Rhodium.
Thanks to both
And what about a HTC Rhodium with WM 6.5? Try it but didn't get it.
Running the latest NRGZ28 6.5 ROM with manilla 2.5 and BBC works fine
AirwolfUK said:
Running the latest NRGZ28 6.5 ROM with manilla 2.5 and BBC works fine
Click to expand...
Click to collapse
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
I have been running BB on my TP2 on 6.1, 6.5 and 6.51 roms with Sense 2.1 and 2.5. They all work, and no, I cannot have multiple data streams so when I use the browser my BB connect shows no connection. If I disconnect data, sometimes BB automatically connects but generally I have to run BB connect, disconnect and reconnect (so I added a shortcut to it on my programs).
For me, using 6.51 and 2.1 gives the least trouble. I dont know why.
BTW I keep getting reminders that there is a new BB Desktop update (5.01).
good idea on adding the shortcut. I have found that it rarely reconnects and I had to turn off the auto update for the weather or I would start missing emails. I hope someone gets a fix for this soon as this is the perfect email phone...
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
I have two streams (BB & Contract Internet) running at the same time.
I am on UK Vodafone contract so that probably makes a difference
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
Having concurrent connections two 2 APNs simulatiously only works for GPRS (as far as I have observed on all my past and current devices).
So if you want to have BBC and Internet at the same time you need to switch to GPRS only and disable auto band switching for 3G. If anyone knows a way to get concurrent connections working on 3G, please post how.
EDIT: The infos in the follwing post should do the job:
http://forum.xda-developers.com/showpost.php?p=2382465&postcount=37
NEW IMPROVED CABS : POST 3
A very Special Thanks to tucahara, Schap, Jaap de Wolf, Dridder
Note : For HTC devices only, please read 2nd post -below-for non HTC devices.
- 3G, WLan, GPRS Capable
- GPS Works
- Recent Drivers
- Updated Registry
- All Major Codec compatible[ a-law, u-law, GSM ask provider to enable ]
- Integrated with Phone and address Book
- VOIP and Carrier sellectable on today screen
- SIP Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- Dial Plan Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- NAT Enabled
- Echo Canceller
- For WM6.1 and WM6.5
- Tested and working on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K], Xperia X2
- No sound from earpiece ( Please install cab from previous thread but that is only for HTC devices )
INSTALL ON FRESH OS and PLEASE POST YOUR RESULTS GOOD OR BAD. Thanks
THERE IS NOTHING WRONG WITH THESE CABS, SO PLEASE DO NOT COMPLAIN ABOUT CABS. IF THESE CABS WONT WORK, PLEASE READ DIFFERENT POSTS IN XDA AND FIND OUT WHY. MOST COMMON REASON IS DEVICE OR OS NOT SUPPORTRD MEANING DEVICE DOESNT HAVE FILES NEEDED FOR THESE CABS TO WORK.
These cabs are tested, working with different providers-devices and are not for noobs, if you have come across this before, you will find out, these cabs are the best among them.
Outdated Cabs HERE
For non HTC devices, do the following
- Install one of the cabs post 3 matching your OS.
- Fill all required information in setup voip.
- When you try to save you will get a error
- Close it and Run your GPS program.
- Your GPS with get a lock in few minutes as normal.
- Once you find out your GPS program can see satellites, close it.
- Copy and paste dnsapi.dll into your windows folder
- Restart your device and you will have your gps and voip/sip working
- Make sure to fill information in setupvoip again
New improved cabs
New improved cabs with changed dll. Note : Only for HTC devices. For other non HTC devices, please refer post 2 along with these cabs for optimum results.
Reserved for future2
Reserved for future3
Reserved for future4
Calls hang up immediately after being answered
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
nickdo said:
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
Click to expand...
Click to collapse
Samsung WM6.5 drivers not compatible with dlls. Please look at outdated cabs link above and go to last page for omnia solution. It works fine on my omnia with Wm6.1. I have tried on WM6.5 on Omnia with same results as yours.
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
nickdo said:
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
Click to expand...
Click to collapse
you are right
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
That is not right. I have an Omnia 2 i8000 windows mobile 6.5 and I am able to use voip on my phone.It works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. AutoAudioRoute V2.0
4. Copy paste dll in windows folder.
My PDA is i8000NXXJJ1
jukefox said:
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
Click to expand...
Click to collapse
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
bbuhas said:
that is not right. I have an omnia 2 i8000 windows mobile 6.5 and i am able to use voip on my phone.it works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. Autoaudioroute v2.0
4. Copy paste dll in windows folder.
My pda is i8000nxxjj1
Click to expand...
Click to collapse
----------------------------------------------------------
this is not the integrated solution sir. Thanks for time.
----------------------------------------------------------
dhillonbros said:
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
Click to expand...
Click to collapse
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
jukefox said:
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
Click to expand...
Click to collapse
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
dhillonbros said:
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
Click to expand...
Click to collapse
My phone works great with other not integrated solutions like PortSIP or AGEphone Mobile, so my network is fine. And there should not be a problem with the codecs as well as PortSIP (I don't of the codecs AGEphone uses) uses G711U, G711A and GSM as well (I know of them because theses codecs are configurable over the GUI).
I use AVM FRITZ!Box 7390 as modem / router with its own SIP registrar. That means my Omnia II is configured to use my FRITZ!Box as a SIP server whereas my FIRTZ!Box is connected to my VoIP service provider (the popular German internet provider 1&1) and redirects the VoIP packets to them. It is totally transparent to the SIP client therefore no STUN / ALG (I never heard about ALG before) is used between the SIP client and my FRITZ!Box.
I am not willing to create an account at voipvoip.com because I definitely want to use the phone numbers I got from my ISP but I may provide you credentials for testing purposes to use a phone number from my ISP if you like.
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
jukefox said:
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
Click to expand...
Click to collapse
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
dhillonbros said:
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
Click to expand...
Click to collapse
Hello again,
I already bypassed my router by configuring my pbxes.org account, didn't I? Anyway I now switched my router with integrated telephony services support by an older FRITZ!Box 3130 without telephony services to exclude any conflicts with reserved ports or somewhat else. And you know it: Same result.
Last but not least I tried a connection over 3G by activating that option within the configuration. But I failed already with selecting the service. The search action did not succeed.
I'm running out of ideas. What now? Shall I setup an account for you? I really wanna see whether you are able to reproduce my problem or not.
Thanks a lot.