Related
Both mine and the wife's Exec's now have loose styluses, is there any way to fix this?
Sellotape
Deaks100 said:
Both mine and the wife's Exec's now have loose styluses, is there any way to fix this?
Click to expand...
Click to collapse
My Wizard's always done this. I've had it apart and couldn't fix it, so have settled for using a couple of turns of sellotape around the tip end of the stylus. Do it neatly and you can't see it, and it works nicely.
Ric
i put two small pieces of insulating tape in the hole where the stylus goes... it seems to hold well. i have attached a image. good luck
Deaks100 said:
Both mine and the wife's Exec's now have loose styluses, is there any way to fix this?
Click to expand...
Click to collapse
Hi, you can try one of these. Bee usiing mine for ages now and it's great. http://www.boxwave.com/products/styraballpointpen/styra-ballpoint-pen-stylus-i-mate-jasjar_723.htm
These are available from UK (mobilefun I think)
Regards
Mav
mavrik64 said:
Hi, you can try one of these. Bee usiing mine for ages now and it's great. http://www.boxwave.com/products/styraballpointpen/styra-ballpoint-pen-stylus-i-mate-jasjar_723.htm
These are available from UK (mobilefun I think)
Regards
Mav
Click to expand...
Click to collapse
Hi,
It looks the same size - does it really stay in place more than the original, if so I'll get one!!
Thanks Matt
Tape: £1.39
Time out from work to craft the end of the tape to suit the exec: £4.50
The look on my other half's face when I prove the stylus will stay put: Priceless.
For most things you can use your Mastercard, for everything else, there's insulating tape.
P.S. I used black so it doesn't look so conspicious... is it vain or just the geek in me?
Best wishes,
i just wrapped a little tape around the stylus, just where the plastic meets the metal, works great, had it in situ around 4/5 months now
matt1971 said:
Hi,
It looks the same size - does it really stay in place more than the original, if so I'll get one!!
Thanks Matt
Click to expand...
Click to collapse
Not dropped out of my Exec yet. Funny thing is, I didn't think it would last long so I also bought a pack of 3 stock Stylus. Never used them. Hope I never will.
The new one has been in since Dec 06, used daily, and still going strong.
Regards
Mav
my stylus wud come out as if cheese but then i lifted the black part little up and now it stays in it place
Best thing is to actually get one of those 3-in one styli. They are actually a little thicker, which means they stay in a lot better. Mobile Fun sell them. Just google them and fine oneone.
Hi guys,
Today I noticed a very weird looking spot on the screen, or better just below it. It seems like there is some fluid just beneath the surface of the screen. I am always very careful with my HTC's, so I really don't believe I caused it... There was no pressure, I didn't drop it, I carry it in my shirt breast pocket or inside pocket of my jacket, without any other items. I really really dont know what happened - I pulled it out of it's leather sleeve, and it was there. This morning it wasn't.
Any idea if this is covered under warranty? Any idea what caused it?
Best Regards,
Lukas
Lukasss said:
Any idea if this is covered under warranty?
Click to expand...
Click to collapse
I'd be STRAIGHT on to my supplier if mine looked like that! How does it look when the screen is on, cos let's face it, that's when it really matters, and probably how they'll view it when it comes to the warranty.
It's difficult to capture on a picture, but it's VERY visible when screen is on. Colors beneath the spot (wallpaper) seem washed out a little, so you get a very small color difference...
Something to do with cold weather and heating leading to condensation? I have no idea but I would ake a photo and email HTC AND your place of purchase ASAP to see if you could get a replacement, even if it doesnt bother you when the screen is on. It would bother me though, I think I havean almost OCD like quality when it comes to devices being perfect...
On a second thought, the leather case that comes with it is extremely tight, I couldn't remove my phone from it for the first few days till it stretched out! Do you think that might be enough pressure to do that to a screen?
I'd definitely get on to whoever you got this from then. That's not good!
call the waranty service ...
Mine had a weird spot as well right in the middle (and it appeared out of nothing like yours). Doesn't quite look like yours though (maybe you just caN't see it in the photo). Only noticeable at certain angles, and it looks like a colorful smudge. With the screen on it's even harder to notice it. When you press on it the "puddle" moves and shifts.
It looks like there is humidity under it. I went to the shop where I bought it, and they said that happens with some other touch screen phones, and is bound to disappear. The guy said it was due to the heat getting trapped bellow the screen.
In my opinion looks more like a humidity condensation thing.
Take it to the shop where you bought it, ask for an opinion. You still have loads of time to use the warranty, and if in 3 or 4 months it is still there or if that bothers you, just activate the warranty.
Thnx for the replies guys!
Something to do with cold weather and heating leading to condensation? I have no idea but I would ake a photo and email HTC AND your place of purchase ASAP to see if you could get a replacement, even if it doesnt bother you when the screen is on. It would bother me though, I think I havean almost OCD like quality when it comes to devices being perfect...
Click to expand...
Click to collapse
I don't think it's cold/warm/cold issue... Today I got up, put my phone in my inside jacket pocket, went down to my garage, got in the car, drove to work, into an underground garage and took the elevator into the office - phone wasn't exposed to cold today AT ALL. And it doesn't seem to be water, it's not very fluid, and there is no damp.
even if it doesnt bother you when the screen is on
Click to expand...
Click to collapse
It bothers me massively - even when I'm NOT looking at it. The spot is also very visible when the screen is turned on.
I'd definitely get on to whoever you got this from then. That's not good!
Click to expand...
Click to collapse
Did that immediatly after noticing the spot - my supplier asked me to e-mail him the pictures which I did, but he seemed reluctant to promise a replacement... He said that quote mechanical damage is not covered by HTC warranty unquote. This sucks - I didn't do anything wrong!
Grtz
Lukas
CyberClaw said:
Mine had a weird spot as well right in the middle (and it appeared out of nothing like yours). Doesn't quite look like yours though (maybe you just caN't see it in the photo). Only noticeable at certain angles, and it looks like a colorful smudge. With the screen on it's even harder to notice it. When you press on it the "puddle" moves and shifts.
It looks like there is humidity under it. I went to the shop where I bought it, and they said that happens with some other touch screen phones, and is bound to disappear. The guy said it was due to the heat getting trapped bellow the screen.
In my opinion looks more like a humidity condensation thing.
Take it to the shop where you bought it, ask for an opinion. You still have loads of time to use the warranty, and if in 3 or 4 months it is still there or if that bothers you, just activate the warranty.
Click to expand...
Click to collapse
Thnx for the reply.
The spot on my phone is really visible, doesn't matter at which angle you look. Screen off is worse than with screen on. There is no color in the spot whatsoever and it doesn't seem to be movable (if I press hard I can make it bigger, but it returns to original size after release)... I'll keep it warm for the night, and I'll see tomorrow... I could measure it, and see if dimensions are changing when temperature rises or drops.
Grtz
Lukas
Have you flown with it recently?
Pagnell said:
Have you flown with it recently?
Click to expand...
Click to collapse
Nope... so no pressure changes either. Good thinking though...
WTF???
When I heat it for about ten minutes with a blow dryer it disapears. When I stop heating it, it reappears @ room temperature... WTF is this thing?
Lukasss said:
When I heat it for about ten minutes with a blow dryer it disapears. When I stop heating it, it reappears @ room temperature... WTF is this thing?
Click to expand...
Click to collapse
WTF indeed!?! When it dissapears does the display show correctly where it used to be?
Yes, you don't see anything wrong. For about two minutes. Then the spot reappears exactly in the center of the screen (where the 'wait' cursor/hourglass appears) and starts to grow until it has it's "original" dimensions.
???
Lukasss said:
Thnx for the reply.
The spot on my phone is really visible, doesn't matter at which angle you look. Screen off is worse than with screen on. There is no color in the spot whatsoever and it doesn't seem to be movable (if I press hard I can make it bigger, but it returns to original size after release)... I'll keep it warm for the night, and I'll see tomorrow... I could measure it, and see if dimensions are changing when temperature rises or drops.
Click to expand...
Click to collapse
Looking at the placement, it seems it's similar to mine, which is right in the center. Mine returns to the center if I press it as well.
The heat test you just did made me believe it has something to do with heat like the guy where I bought it said...
Here is another thread on the same subject (different phone)
http://forum.xda-developers.com/showthread.php?t=293311
I kept reading around, there are reports of the duct tape method.
Basically it works in the presumption the problem is both screens not keeping space between themselves. Just use duct tape over the wet patch, and pull it 20 or 30 times, and the screen should lift and the patch disappear. I'll try it and tell you if it worked.
Thank you! I'll try it as well.
Didn't work...
lol... I had to look for tape, but the tape method was unsuccessful as well on mine.
thnx anyways.
this is a capacitive touch screen so all are glass and the tape method won't work as there isn't anything to lift up unlike the resistive screen where there is a gap between the top plastic and the actual screen
My Nook Color was all fine and I got a SD-boot of 2.3 CM7 working perfectly!
However, shortly afterwards, I noticed my touch screen kept 'touching' where my fingers weren't. The touchscreen appeared to have gone mad. I couldn't even use the device without having to power off/on the screen every minute or two. It makes the device basically unusable.
Anyway, is this a hardware issue - or is this a known issue with software somehow?! I did notice the issue somewhat in the original boot of the nook, but now it's seems WAY worse (not sure if it's because I'm using it more.)
I've had this exact problem a lot, and I've yet to actually find an answer or a solution on it. It's definitely hardware-caused, though, as I've had Honeycomb, CM7, and Phiremod on here and all of them have given me problems.
I've seen it go crazy when I plug in the charger. Some sort of electrical weirdness with the touchscreen.
Yes, usually when this comes up, the main response is that this is common when the nook is plugged in. Also, try cleaning the screen. I guess both can cause the phantom touches. I get the same thing every now and then. Turning the screen on and off, and cleaning it, seems to help.
First, clean the screen.
Then, turn the screen on and off.
Download Nook Screen Reclibrate and run the app.
Then buy a screen protector!!! Helps a ton! I use Zagg invisible sheild
---------------------------------
Sent from my LG Optimus V using Tapatalk
If this post helped you don't forget to say thanks!
koopakid08 said:
First, clean the screen then buy a screen protector!!!!
Click to expand...
Click to collapse
That. Fixed it for me permanently
THAT's why I had a bunch of screen protectors in my Amazon cart! Lol, I couldn't remember!
Is there a certain brand you guys recommend? Every one I've used in the past has been junk, and it's hard to tell from some reviews if they were just not put on well. Do the matte/anti-glare/anti-fingerprint ones work well?
ponyboy82 said:
THAT's why I had a bunch of screen protectors in my Amazon cart! Lol, I couldn't remember!
Is there a certain brand you guys recommend? Every one I've used in the past has been junk, and it's hard to tell from some reviews if they were just not put on well. Do the matte/anti-glare/anti-fingerprint ones work well?
Click to expand...
Click to collapse
I use the ZAGG and the shield that came with my trident case. Both work great.
---------------------------------
Sent from my LG Optimus V using Tapatalk
If this post helped you don't forget to say thanks!
I must have gotten lucky I just bought a three pack on eBay for $3 of the crystal clear ones. As long as you get it on dust free its great. Make sure to buy more than one because one spec of dust will leave a bubble and ruin it.
Nook Crazy screen
After trying many things and reading many threads I eventually found that storing the nook on it's back as a norm is not a good idea. Dial indicator shows a screen bow inwards. Store you device in a face down position for a day or two and the screen will release unwanted touch commands. Hope this will help.:victory:
Since about 2 months, my HTC HD2 sometimes runs into a strange behavior.
It's like some invisible fingers are touching the screen very quickly, triggering apps, menus, and sometimes calling people!
The only way to stop that is to restart the phone (but when the HD2 starts to behave that way, it's difficult to restart it, as these "invisible fingers" are still competing with MY fingers!).
I don't know what caused the problem in the first place, and I don't know what triggers the problem when it happens.
Is my HD2 out of order?
Thanks
Gz
It could be that your touchscreen is too sensitive and your sweat from your fingers is triggering it; Did you try cleaning the screen, your hands and using a screen protector?
your digitizer is going to die very soon
By "digitizer", you mean the touch glass?
Did it happened to you before?
Why so many of your phones had their glasses cracked?
Thanks
adempozhari said:
your digitizer is going to die very soon
Click to expand...
Click to collapse
It's very probable to happen...
Try to massage the screen around the corners especially above the buttons.
There is some kind of "glue" to prevent contact with metal but if its old or used it could make this problem.
Maby you can trigger it or at least find the point where to press to make it stop.
=> using a heating fan (warm not hot!) to vaporize water could help too maby. No warranty here!
dertester123 you may have found the real cause of the problem, but I'll have to test more before I can confirm.
Cheers.
Gz
i have been having the same problem lately and i must say, i'm pretty sure it's about the sweaty fingers! i have read on other sites that the capacitive (?) screen is too sensitive and that many are experiencing these problems, especially during summer!
JimWest7997 said:
i have been having the same problem lately and i must say, i'm pretty sure it's about the sweaty fingers! i have read on other sites that the capacitive (?) screen is too sensitive and that many are experiencing these problems, especially during summer!
Click to expand...
Click to collapse
Just place some waterdrops on the display or use it with fingers that you put some lotion on....
Problem is when it gets under the display, but thats rather uncommon i hope;D
I case its just just sweaty fingers, what are pants for?
I have the same problem but it only happens in my music app. Could this be causedby a virus of some sort?
vietnameseJames said:
I have the same problem but it only happens in my music app. Could this be causedby a virus of some sort?
Click to expand...
Click to collapse
are you running android ics? In ics they changed the input slightly i heard, and maby its not ported correctly...
When using another music app or switching to generally other apps while music plays everything is okay?
I dont think its a virus or something, most of them want to spy or change userdata and not annoy you
I thought I had found the cause of my problem, but I can't confirm it, as this problem hasn't appeared since the middle of May, when I followed dertester12's advice to massage the screen on the corners!
But I noticed a spot in the middle of my touch screen where the "glass" seems to "touch" or to be glued to something underneath it. This spot is till here today, but despite of that, the problem is not occuring now. I'll try to attach photos of that.
So to sum it up, I'm still not sure about what caused the problem...
grendizerus said:
I thought I had found the cause of my problem, but I can't confirm it, as this problem hasn't appeared since the middle of May, when I followed dertester12's advice to massage the screen on the corners!
But I noticed a spot in the middle of my touch screen where the "glass" seems to "touch" or to be glued to something underneath it. This spot is till here today, but despite of that, the problem is not occuring now. I'll try to attach photos of that.
So to sum it up, I'm still not sure about what caused the problem...
Click to expand...
Click to collapse
Did you disassemble your screen before?
Sent from my T9193 using xda premium
Nope. You think something got under the touch screen?
hengsheng120 said:
Did you disassemble your screen before?
Sent from my T9193 using xda premium
Click to expand...
Click to collapse
I'll dig out the topic.
Hangsheng I have the same problem as described at the beginning, but mine handset had replaced touchscreen with lcd panel.
What it could be the cause of this behaviour?
fikthor said:
I'll dig out the topic.
Hangsheng I have the same problem as described at the beginning, but mine handset had replaced touchscreen with lcd panel.
What it could be the cause of this behaviour?
Click to expand...
Click to collapse
Well the touchscreen must be isolated from the display. Therefore they put some blue glue at the area over the buttons where the HTC logo is. For me I used alcohol to clean the touchscreen as I replaced it and had the problem that when pressure was added the layer of glue was to thin to isolate and gave me fake inputs.
You can test by massaging this area.
Also the contacts on the backside of the screen must be isolated to the housing and the screen. I could think that when you soldered the stock isolation thinned out too..
Last but not least touchscreen, display and housing must be grounded correctly. Therefore all parts are wrapped in metallic foil at the edges... To connect them..
As the touch screen is very sensitive to even little currents its often hard to find the problem as it could also be a totally different cause.
All the above mentioned points should be checked and are relatively easy to fix. But it needs total disassembly what - especially to old devices- has a risk.
Risks are:
That damn flex cables are old and tend to break. The buttons have small tapes on top that come off easily and never go back again... And many more things that break when dis- and reassembled to often.
Sometimes it's cheaper to sell defect HD2 and buy new/used one..
On eBay you often get very good prices for defective HD2..
Gesendet von meinem HTC HD2 mit Tapatalk 2
Odp: [Q] My HTC HD2 is going berserk
The thing is every issue dissappear when it's on WinMob. I cannot pass this behaviour so decided to switch handsets. HD2 was very good phone.
Sent from my GT-N7100 using xda app-developers app
Ok guys - weird happenings, i use a usb cable from my desktop pc to charge my N4 at times. I had been sitting it on top of the pc tower & it has fallen onto the laminate floor 3 times and came out without injury. So i thought it was vibration from my pc tower, so i have been sitting the phone on my pc desk surface, today i found the phone hanging half way across the edge of the desk. There is no serious vibration to mention from my pc or desk, the phone has not been ringing for the phone vibrate to cause it either. So does anyone else have any paranormal activity with their N4 strangely falling off surfaces??
only thing i notice is the glass bottom surface is very slidey
This has been a problem since day one. Put a rear screen protector on. That'll fix you up.
this is the reason I bought a bumper when I ordered mine
Yeah, that's not paranormal I'm afraid, the back is very slippery, the device can and does slide even with no vibrations at all. Just make sure to place something in the surroundings of the phone when you leave it charging that can block random slides.
cheers guys, this is surely a bad design, im so lucky no serious damage occurred. Ill buy and try the rear screen protector as im not a fan of phone covers etc, Fingers crossed this does the trick. Many thanks guys for the feedback :good::good: :laugh::laugh:
mystic.bertie said:
cheers guys, this is surely a bad design, im so lucky no serious damage occurred. Ill buy and try the rear screen protector as im not a fan of phone covers etc, Fingers crossed this does the trick. Many thanks guys for the feedback :good::good: :laugh::laugh:
Click to expand...
Click to collapse
You are charging it with your PC on top of the tower with a cable tugging on it... And you are saying it is bad design? Give me a break.
Try using your charger and maybe put it someplace where the cable will not pull it. This is not rocket science.
Sent from my Nexus 4 using xda app-developers app
Richieboy67 said:
You are charging it with your PC on top of the tower with a cable tugging on it... And you are saying it is bad design? Give me a break.
Try using your charger and maybe put it someplace where the cable will not pull it. This is not rocket science.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
stop being such a forum ****.
I never said i was charging it on top of the pc tower, i sat it there. When its charging its on a flat desk surface as is the charge cable. I have sat the phone on my desk and sat it on top of my wallet and it falls off. So with this phone i will need to be careful how i place it. Of course its a bad design, i should be able to sit my phone flat on a flat surface and not worry about it falling onto the floor. Nexus aint gonna give me a new one if it were to get broken and no warning came with the phone.
oh and you know what, common manners to fellow humans, that aint rocket science :silly:
Wrong forum for this discussion really
Sent from my Nexus 7 using Tapatalk 2
estallings15 said:
This has been a problem since day one. Put a rear screen protector on. That'll fix you up.
Click to expand...
Click to collapse
can you give me a pointer to finding one, all i can find on ebay is front screen covers and gel covers etc , thanks
mystic.bertie said:
can you give me a pointer to finding one, all i can find on ebay is front screen covers and gel covers etc , thanks
Click to expand...
Click to collapse
Search for Zagg. Also do not search for screen protector. Try searching "skin" or back protector.
grubbster said:
Search for Zagg. Also do not search for screen protector. Try searching "skin" or back protector.
Click to expand...
Click to collapse
ok thanks matey, the zagg ones are very expensive so i bought one of these from germany only £2.55. :good:
http://www.ebay.co.uk/itm/360592861179?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
simms22 said:
my n4 has the same problem, its constantly trying to cut its life early. ive considered taking it in for therapy, but i havent found a doctor that specializes in nexuscide. yesterday morning, i woke up to it dangling by a chord besides me, about an inch above my hard ceramic tile floor
Click to expand...
Click to collapse
close call mate, i can vouch that it is well made after 3 falls and coming out unscaved.
my daughter found mine yesterday half hanging off the edge of my desk :silly:
grubbster said:
You seem very angry. This is just an internet forum. Not much to get worked up over.
Click to expand...
Click to collapse
your right thats why im perfectly calm, im just fed up with idiots spoiling the forums i use. It just puts me off using that particular forum again.
mystic.bertie said:
close call mate, i can vouch that it is well made after 3 falls and coming out unscaved.
my daughter found mine yesterday half hanging off the edge of my desk :silly:
Click to expand...
Click to collapse
my n4 has probably fallen/jumped at least 50 times over the past 5 weeks, and its still in perfect condition(no cases or screen guards). luckily, the far majority of falls have been on a carpet, but some have been pretty scary
I can also say that I find mine sliding. It's quite weird actually, from the tests I've done I've noticed that it usually occurs when I have it on my leather couch or my ottoman. Yes, I know it's not a desk but the phone is sitting there rather level. It has also done it on my home desk as well, but not at my work desk (yes, both desks are level). It kind of reminds me of an air hockey table type situation. If you have it on your desk and push it, it doesn't require as much work as lets say an SGS3, Galaxy Nexus, or Blackberry to move. Basically the way it's designed causes it to not create much friction between it and the surface it is on.
Although, none of this bothers me since the phone is a fricken beaut.
crecsky said:
I can also say that I find mine sliding. It's quite weird actually, from the tests I've done I've noticed that it usually occurs when I have it on my leather couch or my ottoman. Yes, I know it's not a desk but the phone is sitting there rather level. It has also done it on my home desk as well, but not at my work desk (yes, both desks are level). It kind of reminds me of an air hockey table type situation. If you have it on your desk and push it, it doesn't require as much work as lets say an SGS3, Galaxy Nexus, or Blackberry to move. Basically the way it's designed causes it to not create much friction between it and the surface it is on.
Although, none of this bothers me since the phone is a fricken beaut.
Click to expand...
Click to collapse
man this means no where can be trusted to sit your phone. what puzzles me is it always slides off to danger, not further onto my desk .
minieod said:
everyone is MAKING FUN OF YOU
do you not see that?
wow.
if you have something on top of a flat surface...unless there is something acting upon it...there is no way for it to "slide off" ... how can you perceive that even possible?
Click to expand...
Click to collapse
im not making fun of him. and there is something acting on it, its called gravity. it does mean that the surfaces arent perfectly flat, but even the slightest non perceivable slant cause it to slide.
mystic.bertie said:
your right thats why im perfectly calm, im just fed up with idiots spoiling the forums i use. It just puts me off using that particular forum again.
Click to expand...
Click to collapse
Better get a thicker skin quicker as you're dealing with a lot of teenagers in these forums. Its like playing WoW, way too many prepubescent teens.
guys, it's not the phone. It's the surfaces you're placing it on. Most tables/desks are nice, smooth and shiny. Combine that with the glass and a NOT SO PERFECTLY FLAT SURFACE and you get falls
Trust me...it's not voodoo or non-Newtonian physics
Just get any cheap gel case and you're set. I actually got a brilliant one for 2 GBP Really nice looking and with really really grippy sides.
Thread clean. It's really not nice to make fun from someone, especially here - on a biggest tech forum in the world
@OP Private messages are meant to be PRIVATE, so please don't post them here.
Now let's back on topic, please.