Related
Hi, I tried to install the Artemis Touch 4.02 Full with 4 sided cube ROM on my HTC 3301 (same that 3300) but when I try to install the mobile has restarted when the bar progress stay on 3% and don't work... please help me, my mobile don't work more, and I don't know what to do!
Thanks
3% is a classic... did you use uspl first? In this case it means that you have to perform step1.bat first, then step2.bat. Make sure step 1 went well, then try step2 again.
Gwystyl said:
3% is a classic... did you use uspl first? In this case it means that you have to perform step1.bat first, then step2.bat. Make sure step 1 went well, then try step2 again.
Click to expand...
Click to collapse
But when I execute STEP 1 I see this message:
"No Device Connected" -> "Would you like to try copying again?"
And don't work... My mobile only enter in bootload (Red, Green and Blue Screen).
The Active Sync don't connect in mobile on bootload screen =(
What I do?
Do you have a SD Card >2GB in your Slot?
Then removed it and try it again ... There is a known problem with flashing while a sd card >2GB is connected (you have to install the sdhc driver after install in order to use your sd card ... maybe its included in the rom)
Uncle_CM said:
Do you have a SD Card >2GB in your Slot?
Then removed it and try it again ... There is a known problem with flashing while a sd card >2GB is connected (you have to install the sdhc driver after install in order to use your sd card ... maybe its included in the rom)
Click to expand...
Click to collapse
No, I removed the memory card before install... I trying to use the mtty, but I don't have successfull too =(
I read on web that I can put a ELF0IMG.nbh file on memory card and power up on bootload with the card to install the ROM... it works?
Thanks
hmm, i dont know ... but if theres a tutorial give it a try
which USPL Version is shown when you try to start your phone?
Uncle_CM said:
hmm, i dont know ... but if theres a tutorial give it a try
which USPL Version is shown when you try to start your phone?
Click to expand...
Click to collapse
IPL 3.16.0001
SLP 3.16.0000
GSM 03.06.90
OS 10.0.0.10
Okay, than you could try this "by hand":
http://forum.xda-developers.com/showthread.php?t=311403
This worked for my O2 XDA Orbit (HTC Artemis) ... it could be, that youre device isnt supported ... it could be different as a P3300?!
Uncle_CM said:
Okay, than you could try this "by hand":
http://forum.xda-developers.com/showthread.php?t=311403
This worked for my O2 XDA Orbit (HTC Artemis) ... it could be, that youre device isnt supported ... it could be different as a P3300?!
Click to expand...
Click to collapse
Thanks, but I can't sync my phone because I can only enter in bootload mode =/
I tried puting the ARTEIMG.nbh file into memory card, but only give the message: "Invalid Certificate".
Thank you for try to help me, but I don't know what I can to do! I think that my mobile is dead forever =/
So, you can't turn on your device anymore?
Did you tried a Hardreset?
Uncle_CM said:
So, you can't turn on your device anymore?
Did you tried a Hardreset?
Click to expand...
Click to collapse
Yes, I can turn on the device, but don't start the OS, stay on SPL/IPL... screen, and I can enter in BootLoad screen too (Red/Green/Blue screen).
This sounds bad .... the last thing i know is to do a hardreset:
when device is switched on
1. press left and right softkey together and hold ... then stick the stylus in the RESET hole and remove it (but still press the keys)
2. after a short reboot you should see a message with further instruction ... now you can release the softkeys and follow the instructions ...
So, thats the last thing i get in mind ... sorry ...
people!
read wiki sometimes...
hi freands
can i use wm 6.5.5 in my htc viva qvga ? if yes then where i get ?
mehulkarate said:
hi freands
can i use wm 6.5.5 in my htc viva qvga ? if yes then where i get ?
Click to expand...
Click to collapse
I assume that you meant 6.5.3, first of all why did you opened new thread ? the whole opal forum is full of roms then also you opened a new thread.
Anyway here are some wm 6.5.3 roms
http://forum.xda-developers.com/showthread.php?t=571420
http://forum.xda-developers.com/showthread.php?t=619336
There are more but please use search function before posting a new thread.
6.5.3 build 28008 lite rom not working
hi jagan2:
i flashed my opal with ur rom ( Windows phone 6.5.3 build 28008 lite rom) but after started phone the volume key of it not work and memory card not open in file explorer, i taring but it was not ok
plzzzzzzzz help bcos i like very much ur rom ,its very nice
mehulkarate said:
hi jagan2:
i flashed my opal with ur rom ( Windows phone 6.5.3 build 28008 lite rom) but after started phone the volume key of it not work and memory card not open in file explorer, i taring but it was not ok
plzzzzzzzz help bcos i like very much ur rom ,its very nice
Click to expand...
Click to collapse
Iam extremely sorry bro it has a bug that i also know. So i think you need to change your rom until i fix that.
I suggest you to try nguoc rom although it will give less internal storage and less free ram still for beginner its perfect.
need ur help bro
mehulkarate said:
hi jagan2:
i flashed my opal with ur rom ( Windows phone 6.5.3 build 28008 lite rom) but after started phone the volume key of it not work and memory card not open in file explorer, i taring but it was not ok
plzzzzzzzz help bcos i like very much ur rom ,its very nice
Click to expand...
Click to collapse
====>>
hi bro,
today i got my new cell htc viva with windows 6.1 pro.
where did and how can i upgrade to windows 6.5, can you please guide me step by step, i tried to search in this website (XDA) but did not got any perfect solution ...
i download few rom but got error as 270 (file/rom/image currupted )
did not got solution, help needed, please help me
Thanks
Bhupes
spl change
well i made this a while ago, and finally got around to get it fully tested and release it.
this HardSPL is based on version 1.26 SPL. and is version 2 (2.00.cmon). also i *think* this one will not hard reset the phone
it's for any OPAL***** modelid now,
thanks to wlinsong and PhamQuang for testing
instructions:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder (Opal_HardSPL_v2_0.zip).
2) you must have the phone synced with your PC, i.e. device must be in Windows Mobile!
3) run Opal_HardSPL_v2.exe.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) device should go to a grey screen
6) go on with RUU, Hard-SPL flashes, device automatically reboots, job done.
7 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 2.00.cmon
+1: if the screen won't go to grey mode (SSPL), then try manually entering SSPL by using the Opal-SSPL-Manual.zip - run the EXE on the phone then when it went to grey screen, run the HardSPL exe on PC and flash.
finally, donations are always appreciated to the "To Cmonex" link in my signature
now, enjoy the hardspl and cooked roms
UPDATE: How to flash stock SPL back for warranty purposes - please use this only if you need to return device for repair!
steps:
0. first flash entire stock ROM, then after that you can flash stock SPL as *last step*. do not reverse this flashing order please
1. get the RUU_Signed.NBH file from attachment (opalstockspl126.zip (185.3 KB))
2. run hardspl package from attachment (Opal_HardSPL_v2_0.zip)
3. *after* Opal HardSPL EXE extracts files, replace extracted RUU_Signed.NBH with the one from opalstockspl126.zip i.e. when asked to overwrite, say Yes, if it doesn't ask, then you are trying to copy it before running the HardSPL EXE, which is the wrong order.
4. flash just like you flashed HardSPL (see original instructions above)
5. device reboots, you can now check if it says 1.26.0000 or still 1.26.cmon or 2.02.cmon, in the latter case you did something wrong, it has to show 1.26.0000.
Attached Files
Opal-SSPL-Manual.zip (326.4 KB, 5194 views)
opalstockspl126.zip (185.3 KB, 2930 views)
Opal_HardSPL_v2_0.zip (1.03 MB, 5829 views)
download from this link http://forum.xda-developers.com/showthread.php?t=446446
Hi all.
I have been reading in the forum for hours and hours, without beeing able to find an easy way (that I understand) on how to upgrade.
I am an old (retired) man, and not stupid (I hope) but have a slight consentration problem.
I want to upgrade from WM5.0 to Windows Mobile 6.1
(+Opera Mini, support for 8GB SDHC and TomTom 7)
I have: a HTC P3300 ARTE100
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
ROM version: 1.12.405.1 WWE
ROM date: 9/12/06
Radio version: 02.67.90
Protocol version: 4.1.13.28
ExtROM version: 1.12.405.101
The device is not locked (I belive) because I can use any SIM I want in the phone.
I have tried to flash to SPL 1.11.cmon, but ended up with SPL 1.11.0000
So I downloaded and installed HTC_1.12.405.01_026790_WWE_SHIP This put my phone back to original, (SPL 1.12.0000)
Synced and copied enablerapi.cab and Cert_SPCS.cab Disconnected, and ran both of them.
I tried to run start_uspl.exe, but it will only try to update from current rom ver. 1.12.405.1 to ver.9.99
And after a while I get a message on my P3300:
Unable to open log file....
tiny_console_init done
And ROM ver. is back to SPL 1.12.0000
Suggestions anyone?
ok pm me and i will walk you though.
first update to the newest version of active sync thought.
next make sure your device is fully charged.
next back up all data from your device. flashing a new rom will erase all data.
next cid unlock read the first post and download the attachments
http://forum.xda-developers.com/showthread.php?t=308242
after you have done this pm me.
as for opera just download one of the many prepacked opera cabs. here is a link to one that should work. http://forum.xda-developers.com/attachment.php?attachmentid=281464&d=1266292843
to my limited knowledge of sdhc support and the p3300 all of the cooked roms have sdhc support cooked in. so when you get a newer rom on your phone sdhc should work.
Arggggh
I can use any SIM in my phone. Is CID unlock really neccesary?
I downloaded pof's Artemis_USPL and ran it, but it seems nothing was changed.
I too wants to change the ROM ver. from 1.12.405.1 to ver. 9.99
And the link to: HTC P3300 WWE factory rom - is dead.
But I found HTC_1.12.405.01_026790_WWE_SHIP another place.
I have also found and downloaded AndreW82_WM6.1_21056_Lite_v1.4_WWE.nbh
But am afraid to try to install it since my ROM is not ver. 1.11.cmon.
Here is what I have tried so far:
Downloaded Artemis_USPL
Synced and copied enablerapi.cab and Cert_SPCS.cab
Disconnected, and ran both of them.
Booted and Synced.
Started start_uspl
(wich opened a dos window)
After 10....20.... and so on, phone softbooted.
Message on phone:
UNABLE TO OPEN LOG FILE
TINY_CONSOLE_INIT DONE
PDA Phone ROM Update Utility 3.0.3.1 stardet automatically on PC.
Checked: I understand... and clicked Next
Checked an confirmed preparation steps, and Next
New window:
Current version 1.12.405.1
Select from below UPDATE the current ROM version.
clicked on Update
Program then wants to update to version 9.99
Clicked on Next
New window:
This will take approx 10 min, - Next
Phone screen changes to red green blue, runs a bar up to 100%, and the softboots.
Takes about 10 sec, not 10 min.
Error message pops up on PC:
Error 270
Image file is corrupt.
EXIT
Disconnected anf booted phone.
SPL is still the same (SPL 1.12.0000)
___________
Trying again:
Synced
Ran EnableRapi.cab and Cert_SPSC.cab
Did not boot or disconnect, but started start_uspl.exe
10...20... and so on
70% phone-screen goes white
PDA Phone Update Utility 3.0.3.1 pops up on PC.
No reaction on phone, Hard reset.
SPL is the same (1.12.0000)
...
mini z
soft reset when the ruu window opens..
when dos window closes..
ok, now for my question..
my spl is 1.11.cmon so cid is already done and has been for a year, i have flashed several roms so i am not a noob at flashing..
the connection from my pc to artemis dsconnected during flash and now in bootloader.. it wont flash from sd..
i know how to use the mtty commands coz iv used it before, but cant remember how to get it to select USB from the 'port' menu..
*how do you get it to select usb?
i know how to use mtty but cant remember
Ai... I'm sorry man, I've never flashed an Artemis before and I don't have the tools to do it either. Maybe you should ask in #xda-dev on IRC?
...
I.m doing something wrong, but don't know what.
Phone on - connecting USB - phone syncs.
Start start_uspl.exe - at 100% screen goes white.
Softresetting - waiting for sync - then confirming on PDA Phone Update Utility.
(The uspl.zip i got from raving_nanza)
After it has finnished, phone boots - and I still have USPL ver. 1.12.0000
raving_nanza said:
ok, now for my question..
*how do you get it to select usb?
Click to expand...
Click to collapse
PC:
Active sync > File > Connection Settings > Allow USB connections, and select a port. (e.g. COM2)
Phone:
Phone > Settings > Connections > USB to PC > Enable
Then:
Phone > Programs > Active Sync > Menu > Connections > Sync PC's with this connection > Select USB.
Mini-Z said:
PC:
Active sync > File > Connection Settings > Allow USB connections, and select a port. (e.g. COM2)
Phone:
Phone > Settings > Connections > USB to PC > Enable
Then:
Phone > Programs > Active Sync > Menu > Connections > Sync PC's with this connection > Select USB.
Click to expand...
Click to collapse
cheers dude..
try this..
raving_nanza said:
try this..
ruu_signed.rar
Click to expand...
Click to collapse
Hi
Tought I should not try to install the .nbh file if USPL was not 1.11.cmon.
Btw:
One of the first steps is to take out the SD-card. Is that what I am doing wrong?
(Should I copy the AndreW82xxxx.nbh to my SD, and have it installed when I run the uspl/RUU?)
...
this is 1.11.cmon.. just try it..
...
take out sd card..
dont flash andrews rom..
do uspl with the one ive just uploaded on this thread..
raving_nanza said:
take out sd card..
dont flash andrews rom..
do uspl with the one ive just uploaded on this thread..
Click to expand...
Click to collapse
This is obviously where I miss something.
the RUU_signed is a .nbh file.
So how do I start it?
Should I use activesync and put it on the phone and some how start it from there?
Or should I put it in the same folder as the uspl cmon, and then run the uspl?
Or is there another trick that I have missed?
put it in the uspl folder and overwrite the one inside..
then do uspl..
raving_nanza said:
put it in the uspl folder and overwrite the one inside..
then do uspl..
Click to expand...
Click to collapse
"Error 270 Update error"
"The image file is corrupted. Please check uour update utility."
(I am using XP sp3.)
(But this time it at least tried to update from 1.12.0000 to 1.11.nosize)
I also tried renaming the ruu_signed to arteimg.nbh
Seems my phone has some kind of lock on the SPL 1.12.0000.
Can it be write-protected in some way?
And if so, how can I "unlock" the write protection?
I.m doing something wrong, but don't know what.
Phone on - connecting USB - phone syncs.
Start start_uspl.exe - at 100% screen goes white.
Softresetting - waiting for sync - then confirming on PDA Phone Update Utility.
(The uspl.zip i got from raving_nanza)
After it has finnished, phone boots - and I still have USPL ver. 1.12.0000
Click to expand...
Click to collapse
I've made several attempts to install 1.11.cmon, none was succesfull.
Two days ago performed another try, but this time without SR. and it worked
q123456 said:
I've made several attempts to install 1.11.cmon, none was succesfull.
Two days ago performed another try, but this time without SR. and it worked
Click to expand...
Click to collapse
Asuming SR means SoftReset - I tried, but it did not help.
Same Error (270)
So I tried again, and again.
Cert_SPCS.cab and enablerapi.cab without disconnecting nor syncing the phone.
Then start_uspl.exe, and on white screen I just started (or rather continued with) the RUU.
WOOHOO - on 3. attempt my SPL changed to 1.11.cmon
So, if you read this post, and have the same problem as I had, here is how to do it:
Download attached file, unzip it, and read the install.txt
...
1.1.cmon is 1.11.cmon
dont forget to thank POF
glad you done your spl now, which rom you gonna use, i suggest the andreW82 rom or the babbelut rom..
andreW82 +1
I glad, you did it, Mini-Z
raving_nanza said:
1.1.cmon is 1.11.cmon
dont forget to thank POF
Click to expand...
Click to collapse
1.1.cmon was the name of the zip you sent, but OK, I have changed it now.
CREDS for pof is added to install.txt
raving_nanza said:
glad you done your spl now, which rom you gonna use, i suggest the andreW82 rom or the babbelut rom..
Click to expand...
Click to collapse
I have a slight consentration problem, so I forgot that I am only half way.
I have downloaded a couple of .nbh files (AndreW82, Touch 4.02, Tom Black v5.0).
I have not yet decided wich one to use.
I want to install TomTom7 and Opera Lite + support for 8GB SDHC.
Now I just have to figure out how to install one of the .nbh files.
Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.
ibrahim-windeck said:
Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.
Click to expand...
Click to collapse
SPL 3.03 isn't compatible with HSPL sir.
But you can run Android on your Stock Rom 3.14!
Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2
somaking said:
Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2
Click to expand...
Click to collapse
Hi, I am a complete n00b at this but I have spl 3.03.0000 as well on my HD2 and I want to run android with sense - considering the FroyoStone Sense v3.2 like you have.
Before anyone completely grills me... I've done my research and downloaded everything I needed up until I came across a few posts on xda about not needing HSPL3 and radios etc if I had spl 3.03 on my phone because Android can run on spl 3.03.
I came across this post and didn't want to miss the opportunity to ask. So my question is, do I still proceed with flashing HSPL3, installing a radio, flashing a custom WinMo rom (ie. Energy's rom), format sd card and putting Android on it, then do the CLRCAD and haret to run Android?
Or (correct me if I'm wrong), can I simply format my sd card and put Android on it and do the CLRCAD and haret in order to run Android, without doing anything to my phone?
I do appologize for being long winded, it seems like we both have the same spl 3.03 and want to use FroyoStone Sense v3.2, and since you got it to work, I wanted to know how you did it.
Any help would be must appreciated,
Cheers!!
When you have SPL 3.03 on your device, don't tray to install HSPL. installing HSPL over SPL 3.03 isn't possible.
and installing a SPL 3.03 ROM over HSPL will limit your program memory to +/- 50Mb. (except on T-mous devices)
Android is compatible with latest stock ROM (SPL 3.93 / Radio 2.15)
If you have robotic voice, try to change the Kernel version.
You don't need to do something special on your device in this condition. Just format your SD card and put Android on it, and run the CLRCAD and haret in order to run Android.
Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/
Creativus said:
Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/
Click to expand...
Click to collapse
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Is it possible to downgrade software? For example if I'm running 1.66 now and wish to try the newest rom but find that I do not like it, could I downgrade back to 1.66?
west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
Thanks dude, I'll give it a try right now.
EDIT:
IT WORKS! BIG THANKS!
west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
What if i need to go back to the stock ROM, do i need to run stock rom again or just use the wipe all function?
Ask how to install android for a European version of HD2
I want to install android for my running HD2 ship rom 3.14.707.3,
2:15 radio contest to select the appropriate version of android to do, I heard that Android can run on hd2 (512) HSPL forward without your help, many thanks.
Same Rom other Problem
Sinds i have the 3.14 stock rom from HTC i get a the error i cannot install unsigned apps, and so i cannot run Android roms etc..
What is the easyst way to fix this.
Marc.
Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.
Did you run the ROMUpdateUtility.exe as Administrator???
You MUST run it as Administrator or it will not work correctly.
juniogyn said:
Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.
Click to expand...
Click to collapse
HELLO
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?
flopesneves said:
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?
Click to expand...
Click to collapse
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?
HI
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
kurt-willems said:
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?
Click to expand...
Click to collapse
flopesneves said:
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
Click to expand...
Click to collapse
Maybe a suggestion, try a other Android build.
HI
kurt-willems said:
Maybe a suggestion, try a other Android build.
Click to expand...
Click to collapse
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms
flopesneves said:
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms
Click to expand...
Click to collapse
the android builds on the hd2 android development subforum are all sd card builds, you can try any one of them
Hello people!
I've been working with windows 7 7592 on my HTC HD2 for some time now and i really want to keep windows 7. I can't seem to find a way to update from 7592 to 7720, does anyone know of any ?
Leo
you'll have to download first the wanted update cab from xbosmod/sylvester's page and send it to your phone with the help of update cab sender from the same guys
Hey, thanx for the quick reply florin_stann!
I tried googleling xbosmod/sylvester but i found nothing, can you be more specific on were i should go to download the rom?
which ROM you have? author (which cooker not version)
only Yuki ROM can update with CAB files.... for other ROM's you must flashing from beginning
Hmm, all i see here is OS Version: 7592.WM7_Main(mojobld).20110308-1514.
Does that help?
Lewnidas said:
Hmm, all i see here is OS Version: 7592.WM7_Main(mojobld).20110308-1514.
Does that help?
Click to expand...
Click to collapse
no... but is possible this is Yuki BTTF ROM?
Can't say for sure m8.. any way you know i can find out?
Any way to figure out who cooked my rom?
I installed windows 7 on my htc hd2 some time ago, i think it was the first Mango release, 7592. Any way i can find out who cooked that specific rom i used so i can update ?
Thank you in advance,
Leo
Lewnidas said:
I installed windows 7 on my htc hd2 some time ago, i think it was the first Mango release, 7592. Any way i can find out who cooked that specific rom i used so i can update ?
Thank you in advance,
Leo
Click to expand...
Click to collapse
did you can send CAB files to phone? if you can, this is Yuki (BTTF) ROM.... but maybe is better to try change to other ROM.... only one warning... if your ROM is Yuki, then your sdcard is locked... you must first unlock it with sending unlock CAB file to phone and then format it before install new ROM....
i recommended this ROM
http://forum.xda-developers.com/showthread.php?t=1356833
I could send cab files through a Microsoft developer tool, and my sdcard is not locked.
I will try the rom you recommended, thatk you for the reply dxdy!
Will let you know if i come up with results.
Leo
Why is everything so complicated!!
Ok my friend, i allready have Magldr v1.13 and windows 7592.
On your tutorial you write:
- when you turn on phone press and hold power button to boot direct to MAGLDR:
* go to 5. USB Flasher and run ENG_DWI.exe to flash ROM (or TR_DWI.exe. ENG is installer in English, TR is Turkish)
- after flashing process done, and when show Main screen with Tiles, do hard reset (Settings - About - reset my phone)
- you are done... ignore next steps
Got two questions on that.
I downloaded 3_HD2_Pdaimatejam_Rom_Wp7.5_mango_7.10.8107.79_v7.3.rar but there's no ENG_DWI.exe in the file..
How does it install windows 7 8107 just by hard resetting ?
I feel like a pain in the neck, sorry for that, if things get more complicated i'll try to find another way or just stay with 7592.
I flashed sdcard, went to usb mode but DWI.exe wont regognise the usb connection..
Lewnidas said:
I flashed sdcard, went to usb mode but DWI.exe wont regognise the usb connection..
Click to expand...
Click to collapse
one time file is named ENG_DWI.exe.... totally not important how is named, DWI.exe or ENG_DWI.exe.. is same file..
did in USB mode in MAGLDR recognize USB?
Dxdy!!
It worked! Running on windows 7 8107!
Thank you for your tips, be well
Leo
Dude.. I've had this phone for what.. 3 years now?
It still feels new!
Everything works.. marketplace works, speech works, everything.
Only thing there is no alphabet with the apps, but that's fine, i'm sure i'll find something somewhere.
Thanx again dxdy!
Lewnidas said:
Only thing there is no alphabet with the apps, but that's fine, i'm sure i'll find something somewhere.
Thanx again dxdy!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=22260479&postcount=2185