Hi, I tried to install the Artemis Touch 4.02 Full with 4 sided cube ROM on my HTC 3301 (same that 3300) but when I try to install the mobile has restarted when the bar progress stay on 3% and don't work... please help me, my mobile don't work more, and I don't know what to do!
Thanks
3% is a classic... did you use uspl first? In this case it means that you have to perform step1.bat first, then step2.bat. Make sure step 1 went well, then try step2 again.
Gwystyl said:
3% is a classic... did you use uspl first? In this case it means that you have to perform step1.bat first, then step2.bat. Make sure step 1 went well, then try step2 again.
Click to expand...
Click to collapse
But when I execute STEP 1 I see this message:
"No Device Connected" -> "Would you like to try copying again?"
And don't work... My mobile only enter in bootload (Red, Green and Blue Screen).
The Active Sync don't connect in mobile on bootload screen =(
What I do?
Do you have a SD Card >2GB in your Slot?
Then removed it and try it again ... There is a known problem with flashing while a sd card >2GB is connected (you have to install the sdhc driver after install in order to use your sd card ... maybe its included in the rom)
Uncle_CM said:
Do you have a SD Card >2GB in your Slot?
Then removed it and try it again ... There is a known problem with flashing while a sd card >2GB is connected (you have to install the sdhc driver after install in order to use your sd card ... maybe its included in the rom)
Click to expand...
Click to collapse
No, I removed the memory card before install... I trying to use the mtty, but I don't have successfull too =(
I read on web that I can put a ELF0IMG.nbh file on memory card and power up on bootload with the card to install the ROM... it works?
Thanks
hmm, i dont know ... but if theres a tutorial give it a try
which USPL Version is shown when you try to start your phone?
Uncle_CM said:
hmm, i dont know ... but if theres a tutorial give it a try
which USPL Version is shown when you try to start your phone?
Click to expand...
Click to collapse
IPL 3.16.0001
SLP 3.16.0000
GSM 03.06.90
OS 10.0.0.10
Okay, than you could try this "by hand":
http://forum.xda-developers.com/showthread.php?t=311403
This worked for my O2 XDA Orbit (HTC Artemis) ... it could be, that youre device isnt supported ... it could be different as a P3300?!
Uncle_CM said:
Okay, than you could try this "by hand":
http://forum.xda-developers.com/showthread.php?t=311403
This worked for my O2 XDA Orbit (HTC Artemis) ... it could be, that youre device isnt supported ... it could be different as a P3300?!
Click to expand...
Click to collapse
Thanks, but I can't sync my phone because I can only enter in bootload mode =/
I tried puting the ARTEIMG.nbh file into memory card, but only give the message: "Invalid Certificate".
Thank you for try to help me, but I don't know what I can to do! I think that my mobile is dead forever =/
So, you can't turn on your device anymore?
Did you tried a Hardreset?
Uncle_CM said:
So, you can't turn on your device anymore?
Did you tried a Hardreset?
Click to expand...
Click to collapse
Yes, I can turn on the device, but don't start the OS, stay on SPL/IPL... screen, and I can enter in BootLoad screen too (Red/Green/Blue screen).
This sounds bad .... the last thing i know is to do a hardreset:
when device is switched on
1. press left and right softkey together and hold ... then stick the stylus in the RESET hole and remove it (but still press the keys)
2. after a short reboot you should see a message with further instruction ... now you can release the softkeys and follow the instructions ...
So, thats the last thing i get in mind ... sorry ...
people!
read wiki sometimes...
Related
Since updating to the T-Mobile Rom for my XDA, nearly everythiung has gone wrong.
And when I tried to downgrade it.... Nothing happens.
I used to use a modified Program A to upload it to my phone but it continues to say that the USB devide gets remotely stopped. the only thing that I can think is that my phone is cancelling the upgrade/downgrade.
I have also tried using a copy of the XDATools program to try and:
Upload another Rom.
Copy the rom to an SD card so I can use the bootloader method.
Change the Bootloader so I can use the SD card method.
None of there are working.
Help :-(
I really want to go back to the ATT rom, it might have the annoying thing with the sound but at least it doesn't mess up as much, doesn't format my SD/MMC cards and lets the alarms actually work for me.
if i'm not wrong, it seems you upgraded using the TMO exe file which updated both ROM & RSU.
check ur boot loader version, if it's 5.22 or higher, i think you need to dowgrade to 5.15 ... use the exe file that comes with the XDAtools in the binaries directory .. its name is fixbootloader.exe .. it should update ur boot loader to 5.15 by which you can use XDAtools or the SD method.
Tried that. I do have XDA tools on my machine and used that program but my CDA still has the bootleader of 5.22
And both of my machines don't like trying to update my XDA :-(
This Rom is the most annoying one I have tried mainly becaise now I can't go back to even my original one that I backed from the XDA when I got it.
Am I stuck with this ROM?
omg, i think i am having the same problem. In my case, since ive installed the new rom, i cannot sync with activesync, well very slow anyway. Activesync on my pc stops responding for a while and suddenly it says connected. However when i then run the executable created by the kitchen, it just flashes a command line window for a second.
When I try XDA-toolz with an nbf file, i get the following message:
ERROR: GetConnectionType - An existing connection was forcibly closed by the rem
ote host.
error getting connectiontype
Click to expand...
Click to collapse
Please someone help, because i am really stuck now.
I checked, my bootloader is 5.14, so that shouldnt be the problem, perhaps i need to reinstall activesync, or perhaps lumpistefans kitchen cooks up bad roms. :?:
Nothing wrong with any kitchen ROMs so far ... when ActiveSynce can't recognize the XDA then it's either a PC problem which uninstall/reinstall will solve it ... or it's a wrong RSU update.
The best option so far in case it's a wrong RSU is to copy the proper RSU upgrade (4 files) to the SD card ... insert the SD card into the XDA and copy those 4 files to the \windows\startup directory ... then soft rest.
If the RSU flash works fine the ActiveSync will recognize the XDA again then you can preform a new ROM update
Note: RSU flashing is risky ... do this action on your own responsibility!!
Biso007 said:
Nothing wrong with any kitchen ROMs so far ... when ActiveSynce can't recognize the XDA then it's either a PC problem which uninstall/reinstall will solve it ... or it's a wrong RSU update.
The best option so far in case it's a wrong RSU is to copy the proper RSU upgrade (4 files) to the SD card ... insert the SD card into the XDA and copy those 4 files to the \windows\startup directory ... then soft rest.
If the RSU flash works fine the ActiveSync will recognize the XDA again then you can preform a new ROM update
Note: RSU flashing is risky ... do this action on your own responsibility!!
Click to expand...
Click to collapse
I dont understand how i can have a wrong rsu? I didnt update it , as far as i know , i just updated the pda part. I only saw programme A.
Activesync does recognise my xda, because i can synchronize and explore my device. It does however take a long time before activesync sees the device after its connected. It also stops responding when its connecting, for a few minutes. I tried reinstalling activesync, this didnt help.
prowling said:
ActiveSync does recognise my XDA, because i can synchronize and explore my device. It does however take a long time before ActiveSync sees the device after its connected. It also stops responding when its connecting, for a few minutes. I tried reinstalling ActiveSync, this didnt help.
Click to expand...
Click to collapse
If there is something wrong with the RSU it will defeinitly slow the USB performance, not neceassary by wrong RSU flashing ... otherwise, check the pins of your cradle or the 22-pin connector of the XDA ... maybe one or more pins are bent or weared.
Tried upgrading the radiop stack and although the reception is slightly better... It still won't let me upload,
and its a new cable too :-(
Oh well looks like I am stuck with it.
Another way to upgrade firmware
Are there other ways to upgrade the bootloader from SD card from within the device or even to upgrade the OS from within the phone itself?
You know... as a last alternative?
You can use SD reader/writer from the PC using XDAtools ... once the .nbf file is on the SD card, use the normal SD flashing method.
Or you can use another XDA device from a friend to copy the file to your SD card
I am having the same problem. I have TMO 4.01.16 and since I installed I can't down/upgrade my ROM through EXE or XDA tools, it says my device isn't connected, but I can still connect with Active Sync and all that jazz
ha ha
I can fix all your problems!
How?
Finally got it to work, Although it was a little bit of effort to do so.
I went back to the kitchen and downloaded a NB1 cooked rom with the "B" Signature. Then I basically ran the TMobile Setup again...
Once the setup files were on my computer I overwrote their .NB1 file with the one I just cooked.
But.... I forgot to change the file for the Radio Stack.
The machine worked except for the phone and as something is still stopping me. *it was my first reboot* It wouldn't let me use a new radio stack.
Ended up that i kept on going in to the bootloader and eventually turned my radio off altoghether before trying an update.
Now I am back to a decent rom... (Cooked and modded version of the ATT Wireless rom) and I am almost really happy.
Now to figure out how to stop the annoying sounds starting off really low.
But til then... I'm 90% happy
Thespus2002 said:
How?
Click to expand...
Click to collapse
Use the Sd Method flashing!!
Tmobile roms won't let you upgrade from the usb, here's the link and it will guide you how to flash your device from the SD good luck
http://forum.xda-developers.com/viewtopic.php?t=3274
The way I described.. I had to use the USB method.
my current bootloader (6.22) will not allow me to boot from an SD card.
And XDATools will not allow me to downgrade it... Yet
on ur PC at \xdatools\binaries run this command: pnewbootloader.exe bootloader_5_15.nb0
Wish it was that easy. The phone still appears to be locked in the rom so I can't update the Bootloader. I keep getting a message that says.
Unable to flash in to offset, cannotg disable bootloader write protect.
hi bro
My Herald have a big problem. it's freeze on the HTC spash screen and can't load the ROM. I've made a hard rest, it's done but the problem ist still present.
I've download the Windows Mobile 6 RUU on the HTC official site but it's impossible to do the rest because ActiveSync is not connected with my phone. How can i resolve my problem without ActiveSync?
see this post 6
this method work!
http://forum.xda-developers.com/showthread.php?t=340618
I've done all said in the forum you have indicate but nothing....
I fear that my device is not out!
WaveMaster1406 said:
hi bro
My Herald have a big problem. it's freeze on the HTC spash screen and can't load the ROM. I've made a hard rest, it's done but the problem ist still present.
I've download the Windows Mobile 6 RUU on the HTC official site but it's impossible to do the rest because ActiveSync is not connected with my phone. How can i resolve my problem without ActiveSync?
Click to expand...
Click to collapse
Have you placed the phone into bootloader mode before using the RUU? (Holding the camera down and pressiing the soft reset button?)
Activesyn won't recognize the phone if connected during bootloader ... but if the phone says "USB" on the bottom left, you can run the RUU and it will work.
My device display "USB" in bootloader mode when i connect it to my PC.
But the problem is that the pc can't detect a new device connected...
When i try to flash by the SD card my herald can't detect the card!
I'm affraid! Please HELP ME!!!
why you d´ont write more?
isp XXXXXXXXXX
spl XXXXXXXXXX
card formatted at FAT 32?
camera + comm + reset ?
and was see you
"card not recognized?"
i am not a profi, but if one one this read, can you help
i find this in herald forum from here, try it again, and again....
and answer.
Ciao
why you d´ont write more?
isp XXXXXXXXXX
spl XXXXXXXXXX
card formatted at FAT 32?
camera + comm + reset ?
and was see you
"card not recognized?"
i am not a profi, but if one one this read, can you help
i find this in herald forum from here, try it again, and again....
and answer.
Ciao
IPL 1.08.0001
SPL 1.08.0001
It's normal that i get same informations about IPL and SPL?
I've done the procedure to enter in bootloader mode
But my computer don't detect it and my device display "USB" in the white area
of bootloader screen (this is normal)
But i don't know why it can't read my card with HERAIMG.NBH file inside!!!
The version of my bootloader is not displayed. Is it normal?
Per aps my bootloader get to be flashed, but how can i do it if it's the source of my problem?
PLEASE YOU ARE MY LAST SOLUTION!
about ipl 1.08xxxx and spl 1.08 xxxxx (very bad problem)
http://forum.xda-developers.com/showthread.php?t=343760&page=2
1 you have original Ruu.,.,......ship.exe
try it again when you are in bootloader mode, and reply. goes or not?
2 you have your original ruu..........ship.exe
whit winrar extrat all, and you have to rename the ruusigned file (60MB or more MB not the file with 1 MB!, to HERAIMG.nbh.
if dont work i some not can help you i m sorry.
my device work after many problem again but i have no WLAN and i have not isp 1.08xxxxxxxxxx
i wish you can write very good new!
show in your computer
if you are in bootloader mode wiht herald
if you have a networkcard not active! reactive this now
i had wm5 and his sync automatic
but after data crash on herald with wm6 does not sync again,
i search in my computer and a have see that 1 windows mobile device card does not was connect and i have reconnect this. and momentanly works again good with wm5, wm6, touch flo
show, you have no other way
ciao
Hi there,
I have a MDA Compact III from T-Mobile, but I upgraded it to WM6 from o2 in former times.
Now the USB-Connection is broken (don´t ask me why - I don´t know) and I want to send the Artemis to my provider for repairing or changing (btw loading is working by USB, but Windows Vista, XP etc. wont identified the Artemis - tested on serveral PCs).
Because of the guarantee I have first to downgrade the o2-OS to the original T-Mobile-OS. I´ve tried it by SD-Card, but I doesn´t work.
The bootloader shows IPL 3.04.0001 and SPL 3.04.0000. As I understand it, I have to use first Artemis_USPL, but without a working USB-Connection it wont work.
Can someone help me?
Many thanks in advance.
I have still the same problem. Any ideas yet?
Just an idea.but have you tried to activesync your device thru bluetooth and installing the Artemis uspl and then flashing your rom via SD card?
Edit .
Sorry mate, tested it on my Artemis and doesn't work.
I'm having the same problem here.
When i connect it to my pc it starts charging but there is no connection with the pc
Someone knows a fix?
sammis said:
Just an idea.but have you tried to activesync your device thru bluetooth and installing the Artemis uspl and then flashing your rom via SD card?
Edit .
Sorry mate, tested it on my Artemis and doesn't work.
Click to expand...
Click to collapse
Thanx for Testing...
By the way ,did you try to activesync thru bluetooth?
Yes mate. The Artemis was connected but didn´t synchronize.
And bluetooth can't be used to flash
RikP said:
And bluetooth can't be used to flash
Click to expand...
Click to collapse
No,it can't ,but,what i had in mind was this:
What if you extracted the ruu-signed.nbh from the USPL app renamed it to arteimg.nbh and put it in the root of your sd card which you then put in your Artemis.
Now create a bluetooth activesync connection with your PC "It's a ***** but it can be done" ,run the USPL app and once it reaches the point where the Dos window "Black screen" exits you manually enter bootloader and run the arteimg.nbh.
Do you think it might work?
Edit:
If this works then you will have a CID unlocked Artemis and you'll be able to flash any rom thru the SD card.
With "ruu-signed.nbh" you mean an original t-mobile-rom?
rumms said:
With "ruu-signed.nbh" you mean an original t-mobile-rom?
Click to expand...
Click to collapse
No, i mean the one that is inside the USPL app released by Pof.
sammis said:
No,it can't ,but,what i had in mind was this:
Do you think it might work?
Click to expand...
Click to collapse
Doesn´t work.
I put the file ARTEIMG.nbh to SD Card (FAT32), the ROM that I'm using is "Artemis 4.02", but on manual (http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing) says that I need to extract the NBH, but when I try to extract I have a error, then I've copied the file to SD Card, but when I enter on bootload in screen show me "Invalid Certificate" and I don't know what I do! Please help me... my mobile is dead
exact same problem..... has any one got any solution for this ?
Same problem also for me... have anyone found a solution for that???
Thank you all
Same problem with a number of ROM's. The only ROM I have been able to flash is an old wm5 (ART_HTCDAN_11240301_026790_DAN_SHIP). And I think it is an older version than the one installed when I bourght the device
My p3300 refuses to do any flash from win7, sometimes it can't see the device and sometimnes it reaches 2-3% of the transfer before it stops.
mortuis said:
Same problem with a number of ROM's. The only ROM I have been able to flash is an old wm5 (ART_HTCDAN_11240301_026790_DAN_SHIP). And I think it is an older version than the one installed when I bourght the device
My p3300 refuses to do any flash from win7, sometimes it can't see the device and sometimnes it reaches 2-3% of the transfer before it stops.
Click to expand...
Click to collapse
Hi!
Flash USPL first,after that you can flash any ROM into your device.
BR
Szig
probably error 260
mortuis said:
Same problem with a number of ROM's. The only ROM I have been able to flash is an old wm5 (ART_HTCDAN_11240301_026790_DAN_SHIP). And I think it is an older version than the one installed when I bourght the device
My p3300 refuses to do any flash from win7, sometimes it can't see the device and sometimnes it reaches 2-3% of the transfer before it stops.
Click to expand...
Click to collapse
type error 260 in search you will be directed to pages where the sollution is, you must change something in your pc in windows mobile center
show invalid certificate me on
SPL 1.25.0001
Is there a way to install HARDP-SPL from the micro SD card? I am able to flash any rom from my SD-Card, but I am no longer able to connect my Polaris to active sync. Get an error "USB Device not recognized" and I am not able to get synched. Now I have flashed several different rom's and also different radios, that works from the micro sd card. but I am still not able to connect with active sync. When I enter the bootloader mode then I just see that message "POLA100 MFG SPL-2.20.OliNex CPLD-2" So I guess the Hard-SPL is missing. Home I will get some help ;-)
If you step manually to bootlader mode and see the Olinex string, hard-spl is installed!
Thanks for your answer, didn't know that. However, I am not able to connect to active sync even though I have tried different ROM's and different Radios also, flashed from SD-card. Still no connection to activesync :-(
I have the exact same problem for almost a year now, flashing all roms with the micro sd card... and living without active sync :S
Hope someone can help us here
maybe 2 things :
1- your usb cable is ko...try with an another one
2- maybe the usb pins in your device are twisted or broken...
cheers!
ouioui01 said:
maybe 2 things :
1- your usb cable is ko...try with an another one
2- maybe the usb pins in your device are twisted or broken...
cheers!
Click to expand...
Click to collapse
1- the USB cable can't be the problem, already tried a different one, plus using my Touch pro with the same cable on the same computer
2- the pins, I don't know, they look good for what I can tell and it is strange because the phone will be charged with the usb cable
wish I would find a solution.....
fktsndr said:
If you step manually to bootlader mode and see the Olinex string, hard-spl is installed!
Click to expand...
Click to collapse
Can you dumb that down a bit? I don't have access to a windows computer, so I have to rely on the microSD. Is there a way to Hard-SPL the phone with the SD card? I performed a Hard-SPL on my Wing when I first got it, but I think it was an older out-dated version, cuz I get an "Invalid Certificate" error when trying to flash from my microSD.
Thanks,
-Adam
easy solution which I found
If you first install the .nbh file of the .72 stock spl using the micro sd card, then your device will not boot into the OS. Now run the Sony Ericsson update utility (which you can download from their website) and run it. It will try to upgrade the system through usb. After different steps, this software will ask you to reinstall the OS (the spl should match first) and then you can reinstall the stock spl and you are back to square one. Now from here, you can now go anywhere you like.
Note: The above method, I tried it myself and it worked. It might not work for everyone hence use it at your own risk. But if you have a bricked device, then there is nothing to lose.