all i have to do is add the pit file to that section and the KA7 .tar file to the pda section?
i dont need anything in the phone or csc section, right?
richiehd said:
all i have to do is add the pit file to that section and the KA7 .tar file to the pda section?
i dont need anything in the phone or csc section, right?
Click to expand...
Click to collapse
that is how it is supposed to be set up...YES
nothing else
If this helped click thanks button
richiehd said:
all i have to do is add the pit file to that section and the KA7 .tar file to the pda section?
i dont need anything in the phone or csc section, right?
Click to expand...
Click to collapse
you should not need the pit file, just the tar in the PDA slot and click start
Related
1. You should not worry about bricks unless you do something stupid
2. Check your USB cable for issues
3. Do not use other phones tars!
4. Use latest odin (1.81 is latest)
5. Use tars with .md5 if possible
6. Use correct pit such as victory-10528.pit
7. Do not use pit with incomplete tars like CWM, debugkernels, kernel, and modem.
8. Repartition & update phone bootloader is safe if you follow these steps
9. Debugkernel ef02 contain a new bootloader parameter, please check update phone bootloader
noobnl said:
1. You should not worry about bricks unless you do something stupid
7. Do not use pit with incomplete tars like CWM, debugkernels, kernel, and modem.
Click to expand...
Click to collapse
thats what i did. i used a pit with a modem tar... that was probably it.
schnowdapowda said:
thats what i did. i used a pit with a modem tar... that was probably it.
Click to expand...
Click to collapse
I used pit with EC05's modem on odin 1.82 (or so it says) and it was fine actually...
pit is useless without the repartition checked
noobnl said:
pit is useless without the repartition checked
Click to expand...
Click to collapse
Yep, and 1.82 is the latest for anyone else wanting the newest Odin...
Help support autism awareness,it only takes 2 seconds to help make a difference...
http://picketfenceblogs.com/vote/3616
Sent from MyEF02 using XDAPA...
I have a version that says 1.85 I will verify that is the correct version and not just miss labled.
Sent from my lean mean drunken machine useing XDA Premium and a 12 pack of Sam Lager
noobnl, you should post up a link in the OP to the latest version of Odin.
Noob, just curious do u still own an epic, cuz I see people saying u left all the while but I still c u here helping all the while
Run-on sentence [√]
Sent from my SPH-D700 using Tapatalk
yes he owns an epic lol... and 1.82 is the latest version i have..
noobnl said:
1. You should not worry about bricks unless you do something stupid
2. Check your USB cable for issues
3. Do not use other phones tars!
4. Use latest odin (1.81 is latest)
5. Use tars with .md5 if possible
6. Use correct pit such as victory-10528.pit
7. Do not use pit with incomplete tars like CWM, debugkernels, kernel, and modem.
8. Repartition & update phone bootloader is safe if you follow these steps
9. Debugkernel ef02 contain a new bootloader parameter, please check update phone bootloader
Click to expand...
Click to collapse
About #9 are you saying to not check update phone bootloader unless you use the Debugkernel separate tar that came with the leak?
formula84 said:
About #9 are you saying to not check update phone bootloader unless you use the Debugkernel separate tar that came with the leak?
Click to expand...
Click to collapse
No, All full epic 4g.tar can use with phone bootloader update plus the debug kernel contain param.lfs, it should qualify for the update bootloader
Samsung Galaxy Y, Idk what problem I have but im really confused now withh all the non sense. Idk if its looping or not cus sometimes it boots. then after a few minutes turns off again. I can go to Volume up+ home button + lock button then i tried the system recovery. it worked but then it booted up then after a few minutes same problem. Now it turns on and off and whatever. I tried the odin stuff. I downloaded usb drives then odin and the md5 thing. I tried first. it didnt show ready on the odin while i was on download. then next it showed a blue thing so i thought it was ready. I clicked the PDA with md5 in it. then clicked start. but it said FAILED. now idk what to do.
what else can I do and can someone pleaseee explain it step by step. thank you
Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file
marcussmith2626 said:
Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file
Click to expand...
Click to collapse
what is csc file and modem. I only have pda file named recovery.tar.md5
MeetJunx said:
what is csc file and modem. I only have pda file named recovery.tar.md5
Click to expand...
Click to collapse
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers
his rponele
marcussmith2626 said:
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers
Click to expand...
Click to collapse
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you
MeetJunx said:
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you
Click to expand...
Click to collapse
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is
marcussmith2626 said:
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is
Click to expand...
Click to collapse
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?
already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too
MeetJunx said:
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?
Click to expand...
Click to collapse
It will turn off normally - leave it don't interrupt it or try another firmware
akosicarlo said:
already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too
Click to expand...
Click to collapse
hey, Idk what flash or stock rom is. but im googling it right now. and im looking at a video. will this solve my problem with it turning off?
yeah ....
flash stock rom thru odin
note: after the process had been complete it will AUTO REBOOT (dont do anything on the phone) unless it already boot up
hello there! I was using this tutorial:http://www.youtube.com/watch?v=UsKvFaPdm5s
and I encountered an error:
http://i.imgur.com/p7fQ0jG.png?1
the program ran for a good 5 seconds and then I was met with that error, my phone looks like this:
http://i.imgur.com/60f0iZL.jpg?1
so it appears that it may have something to do with...my...Cache? I'm not really sure that would really mean, though.
Help would be GREATLY appreciated. Thank you.
zabrak999 said:
hello there! I was using this tutorial:http://www.youtube.com/watch?v=UsKvFaPdm5s
and I encountered an error:
http://i.imgur.com/p7fQ0jG.png?1
the program ran for a good 5 seconds and then I was met with that error, my phone looks like this:
http://i.imgur.com/60f0iZL.jpg?1
so it appears that it may have something to do with...my...Cache? I'm not really sure that would really mean, though.
Help would be GREATLY appreciated. Thank you.
Click to expand...
Click to collapse
flash the PIT file for whichever update you are on, and then you'll be good to go!
tokan_one said:
flash the PIT file for whichever update you are on, and then you'll be good to go!
Click to expand...
Click to collapse
Hmm I see, how do I go about doing that?
zabrak999 said:
Hmm I see, how do I go about doing that?
Click to expand...
Click to collapse
You can find the PIT file in this thread.
http://forum.xda-developers.com/showthread.php?t=2483380
haza12d said:
You can find the PIT file in this thread.
http://forum.xda-developers.com/showthread.php?t=2483380
Click to expand...
Click to collapse
Hmm alright, I downloaded Official VRUBMI9 4.3, and yet when I click on PIT in Odin, I get nothing
in other words, in your instructions here - http://forum.xda-developers.com/showthread.php?t=2483380
it says "Step 5: Click on the Pit function of Odin and select Pit file you downloaded in Step:2."
The problem with that, is that when I click on Pit, I get nothing, here's a picture of what I'm talking about: http://i.imgur.com/gJ2O0iu.png?1
So even though I downloaded Official VRUBMI9 4.3, I get no options for anything, when I click on Pit
Know what's going on here?
You want the file from this link
http://www.androidfilehost.com/?fid=23159073880936457
its not zipped, so wherever you download it to is where you navigate to from the PIT button..
And youre most likely using the wrong odin file you should be using MJ7. You get the secure cache check fail from trying to flash MI9 over top the new firmware (ie when you tried the de la vega it is MI9 firmware only Kingo works with MJ7)
NeoMagus said:
You want the file from this link
http://www.androidfilehost.com/?fid=23159073880936457
its not zipped, so wherever you download it to is where you navigate to from the PIT button..
And youre most likely using the wrong odin file you should be using MJ7. You get the secure cache check fail from trying to flash MI9 over top the new firmware (ie when you tried the de la vega it is MI9 firmware only Kingo works with MJ7)
Click to expand...
Click to collapse
okay so there's your link, but what about VRUBMJ7 4.3? I'm downloading that now....Do I use your link you just linked me, as well as VRUBMJ7 4.3?
You can use the .pit alone to see if that will unbrick it or use both to return it to stock MJ7 file is linked in that thread http://downloads.crackflasher.com/?dir=Devs/Hashcode0f/note3/hltevzw
Hi, I have a sgh i337. A few of my little cousins were playing with my phone and used vroot to accidentally uninstall the at&t software update app/ configuration from the phone. Now every time I press software update nothing happens. What do I do? Plus
My phone is unlocked and I live outside the USA.. will I still receive the OTA update or how do I update to Kit kat...
What do I do?
I don't know what firmware version you're on, but you're most likely going to have to use odin with your current firmware version. This will return you to stock. Backup everything before you do this.
jd1639 said:
I don't know what firmware version you're on, but you're most likely going to have to use odin with your current firmware version. This will return you to stock. Backup everything before you do this.
Click to expand...
Click to collapse
its running 4.3
jssja said:
its running 4.3
Click to expand...
Click to collapse
Then you need these tar files for Odin http://forum.xda-developers.com/showthread.php?p=49687770
Use the all-in-one and place it in the PDA slot of Odin
jd1639 said:
Then you need these tar files for Odin http://forum.xda-developers.com/showthread.php?p=49687770
Use the all-in-one and place it in the PDA slot of Odin
Click to expand...
Click to collapse
thank u for ur help.. im not sure what u mean regarding placing it in the pda slot of odin
jssja said:
thank u for ur help.. im not sure what u mean regarding placing it in the pda slot of odin
Click to expand...
Click to collapse
When you use Odin it'll become more obvious. You'll down load the tar file to your pc. When you open Odin there will be an area named PDA which you'll browse to the tar file you downloaded.
jd1639 said:
When you use Odin it'll become more obvious. You'll down load the tar file to your pc. When you open Odin there will be an area named PDA which you'll browse to the tar file you downloaded.
Click to expand...
Click to collapse
thanks a lot.. do u have any info on how i can update to kitkat
jssja said:
thanks a lot.. do u have any info on how i can update to kitkat
Click to expand...
Click to collapse
Once you're back to stock it should update by itself
I can no longer get into the tablet, and I have a question about flashing this firmware.
In the .zip download, there are 4 .tar.md5 files. There are the usual AP and BL files, but then there are TWO CSC files. One is called CSC and the other is called Home CSCS. The only difference seems to be the name, they are even both the same size.
I should use the CSC, wwithout the HOME?
Now, the updato link: https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
tells me to only use the AP file in Odin... is that correct, or do I use all three files?
Thank You.-
tdvolland said:
I can no longer get into the tablet, and I have a question about flashing this firmware.
In the .zip download, there are 4 .tar.md5 files. There are the usual AP and BL files, but then there are TWO CSC files. One is called CSC and the other is called Home CSCS. The only difference seems to be the name, they are even both the same size.
I should use the CSC, wwithout the HOME?
Now, the updato link: https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
tells me to only use the AP file in Odin... is that correct, or do I use all three files?
Thank You.-
Click to expand...
Click to collapse
I normally flash just the AP and BL files.
Thank you
lewmur said:
I normally flash just the AP and BL files.
Click to expand...
Click to collapse
Works just fine....
Thank You
lewmur said:
I normally flash just the AP and BL files.
Click to expand...
Click to collapse
I only used the AP file, and everything seems to work fine. Although the Home Page looks different now, a few of the apps are missing. (none that I want)
Even if seems to boot properly, should I still flash that one too?
tdvolland said:
I only used the AP file, and everything seems to work fine. Although the Home Page looks different now, a few of the apps are missing. (none that I want)
Even if seems to boot properly, should I still flash that one too?
Click to expand...
Click to collapse
Don't fix it if it ain't broke.:fingers-crossed:
lewmur said:
Don't fix it if it ain't broke.:fingers-crossed:
Click to expand...
Click to collapse
That is what I tought....
Thank all for you help