hello there! I was using this tutorial:http://www.youtube.com/watch?v=UsKvFaPdm5s
and I encountered an error:
http://i.imgur.com/p7fQ0jG.png?1
the program ran for a good 5 seconds and then I was met with that error, my phone looks like this:
http://i.imgur.com/60f0iZL.jpg?1
so it appears that it may have something to do with...my...Cache? I'm not really sure that would really mean, though.
Help would be GREATLY appreciated. Thank you.
zabrak999 said:
hello there! I was using this tutorial:http://www.youtube.com/watch?v=UsKvFaPdm5s
and I encountered an error:
http://i.imgur.com/p7fQ0jG.png?1
the program ran for a good 5 seconds and then I was met with that error, my phone looks like this:
http://i.imgur.com/60f0iZL.jpg?1
so it appears that it may have something to do with...my...Cache? I'm not really sure that would really mean, though.
Help would be GREATLY appreciated. Thank you.
Click to expand...
Click to collapse
flash the PIT file for whichever update you are on, and then you'll be good to go!
tokan_one said:
flash the PIT file for whichever update you are on, and then you'll be good to go!
Click to expand...
Click to collapse
Hmm I see, how do I go about doing that?
zabrak999 said:
Hmm I see, how do I go about doing that?
Click to expand...
Click to collapse
You can find the PIT file in this thread.
http://forum.xda-developers.com/showthread.php?t=2483380
haza12d said:
You can find the PIT file in this thread.
http://forum.xda-developers.com/showthread.php?t=2483380
Click to expand...
Click to collapse
Hmm alright, I downloaded Official VRUBMI9 4.3, and yet when I click on PIT in Odin, I get nothing
in other words, in your instructions here - http://forum.xda-developers.com/showthread.php?t=2483380
it says "Step 5: Click on the Pit function of Odin and select Pit file you downloaded in Step:2."
The problem with that, is that when I click on Pit, I get nothing, here's a picture of what I'm talking about: http://i.imgur.com/gJ2O0iu.png?1
So even though I downloaded Official VRUBMI9 4.3, I get no options for anything, when I click on Pit
Know what's going on here?
You want the file from this link
http://www.androidfilehost.com/?fid=23159073880936457
its not zipped, so wherever you download it to is where you navigate to from the PIT button..
And youre most likely using the wrong odin file you should be using MJ7. You get the secure cache check fail from trying to flash MI9 over top the new firmware (ie when you tried the de la vega it is MI9 firmware only Kingo works with MJ7)
NeoMagus said:
You want the file from this link
http://www.androidfilehost.com/?fid=23159073880936457
its not zipped, so wherever you download it to is where you navigate to from the PIT button..
And youre most likely using the wrong odin file you should be using MJ7. You get the secure cache check fail from trying to flash MI9 over top the new firmware (ie when you tried the de la vega it is MI9 firmware only Kingo works with MJ7)
Click to expand...
Click to collapse
okay so there's your link, but what about VRUBMJ7 4.3? I'm downloading that now....Do I use your link you just linked me, as well as VRUBMJ7 4.3?
You can use the .pit alone to see if that will unbrick it or use both to return it to stock MJ7 file is linked in that thread http://downloads.crackflasher.com/?dir=Devs/Hashcode0f/note3/hltevzw
Related
Hey fellas. I have to take my hat off to all of those who have done some great work for the VZW Note 3.. Well to my issue now.
I tried to step back to the original release from the MJ7 (I havent read you cant do that yet but I think I figured out why you shouldn't). I wanted to deox, root and safestrap the MJ7 release and I thought this would be the only way how.
Anyways now I am stuck at the "firmware upgrade encountered an issue. Please use Software Repair Assistant and try again" screen. I have tried to download the stock release from six different sources, all corrupt (one site, six different mirrors) and obviously failed.
Any suggestions? I need to go to work soon and my phone is very useful at work....
Thanks
What worked for me was booting to recovery and wiping data..
Sent from my SM-N900V using Tapatalk
Did you flash stock odin files? and knox warranty may have been tripped
oneandroidnut said:
Did you flash stock odin files? and knox warranty may have been tripped
Click to expand...
Click to collapse
Still at 0x0
gixxertriplezero said:
What worked for me was booting to recovery and wiping data..
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
How? I cant get past the screen I was talking about.
Hell-Razor said:
Still at 0x0
Click to expand...
Click to collapse
hmm stock odin files didnt get you back??
oneandroidnut said:
hmm stock odin files didnt get you back??
Click to expand...
Click to collapse
Every time I try and download the stock files (the one before MJ7) all I get is corrupt files. Takes about 20 minutes per file and I hvae done it at least 6 times now... so I have been at this a while.
And that stupid spam thing every time I want to post is driving me insane, literally!
Hell-Razor said:
Every time I try and download the stock files (the one before MJ7) all I get is corrupt files. Takes about 20 minutes per file and I hvae done it at least 6 times now... so I have been at this a while.
And that stupid spam thing every time I want to post is driving me insane, literally!
Click to expand...
Click to collapse
guess we will have to wait and see what somebody else says i dont know if you can odin back to before that or not. my developer edition i dont have to worry about that haha
I tried to do the normal stock rooted file and I get the error "SECURE CHECK FAIL : CACHE"
YES! I finally got it after 4 hours of working on it. Had to re partition it.
Hell-Razor said:
I tried to do the normal stock rooted file and I get the error "SECURE CHECK FAIL : CACHE"
Click to expand...
Click to collapse
Not sure of your exact situation, but you cannot flash MI9 back after going to MJ7. You will need the full MJ7 Odin file and most probably the pit file too.
Link to Hashcode's post for MJ7 tar >> http://rootzwiki.com/topic/106986-r...ap-recovery-v365-stable-2013-11-13/?p=1518202
Link to Droidstyle's post for pit file >> http://forum.xda-developers.com/showpost.php?p=46461911&postcount=1
Edit: I see you got it already. I took too long finding the links.
G8orDroid said:
Not sure of your exact situation, but you cannot flash MI9 back after going to MJ7. You will need the full MJ7 Odin file and most probably the pit file too.
Link to Hashcode's post for MJ7 tar >> http://rootzwiki.com/topic/106986-r...ap-recovery-v365-stable-2013-11-13/?p=1518202
Link to Droidstyle's post for pit file >> http://forum.xda-developers.com/showpost.php?p=46461911&postcount=1
Edit: I see you got it already. I took too long finding the links.
Click to expand...
Click to collapse
Thank you very much anyways. I am hunting now for a root method, the only thing I can find currently is the king one... is it really that bad?
Hell-Razor said:
Thank you very much anyways. I am hunting now for a root method, the only thing I can find currently is the king one... is it really that bad?
Click to expand...
Click to collapse
I used it. YMMV
After updating my phone to the new firmware N9005XXUENA6_N9005OXXENA5_XEO.zip my phone failed to flash using Odin. I have tried so many version of Odin and still no luck, i have basically downloaded every rom that i can find from samsung-updates.com and still no luck. Let me know if you guys have a for fix for this because as of right now i can boot into Odin Mode but when i try to flash it via Odin 3.09 on any Rom it will fail. And yes i have tried every Samsung Kies version to try initialize this phone but it just does not work. i have attached the image of my S/N and Model this is one of the HK version and yes i tried the HK TGY rom and still no luck.
con2vp1 said:
After updating my phone to the new firmware N9005XXUENA6_N9005OXXENA5_XEO.zip my phone failed to flash using Odin. I have tried so many version of Odin and still no luck, i have basically downloaded every rom that i can find from samsung-updates.com and still no luck. Let me know if you guys have a for fix for this because as of right now i can boot into Odin Mode but when i try to flash it via Odin 3.09 on any Rom it will fail. And yes i have tried every Samsung Kies version to try initialize this phone but it just does not work. i have attached the image of my S/N and Model this is one of the HK version and yes i tried the HK TGY rom and still no luck.
Click to expand...
Click to collapse
Well if you can still get into download mode you are still safe.
Does it fail mid flash or can´t even recognize your phone?
Reboot your pc and try again.
It will fail on the ABOOT, and i have tried to reboot my pc and still no luck i have attached my model of the phone
con2vp1 said:
It will fail on the ABOOT, and i have tried to reboot my pc and still no luck i have attached my model of the phone
Click to expand...
Click to collapse
Try this guide. It seems to be the same phone as yours.
If you are trying to go back to 4.3 from 4.4.2 then it won't be possible. You will now have to stay in KitKat only and wait for more ROM for KitKat.
Sent from my SM-N900 using Tapatalk
Did you try flashing with update bootloader ticked? If you tried that already then I think you are going to have to wait for the hk version of kit Kat for your phone to work again.
Or try this..... http://forum.xda-developers.com/showthread.php?t=null
Sent from my SM-N9005 using Tapatalk
odin 3.09 tick Phone boot loader update.
hey_joe said:
Try this guide. It seems to be the same phone as yours.
Click to expand...
Click to collapse
which one should i download the .zip or the .rar and they two different file size
con2vp1 said:
which one should i download the .zip or the .rar and they two different file size
Click to expand...
Click to collapse
Both are same.
Rar is just better compressed. I went with it.
Just an idea make sure reactivation lock is not ticked in settings
Sent from my SM-N9005 using xda app-developers app
rcp27 said:
Just an idea make sure reactivation lock is not ticked in settings
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Its not ticked, i might just have to wait to an HK firmware to update this because any other i have tried is not working and it says PIT FAIL when i try this solution http://forum.xda-developers.com/showthread.php?t=2613374. even though i followed the instructions step by step.
Is there another way to flash my device other than Odin? and yes ADB does not work
con2vp1 said:
Its not ticked, i might just have to wait to an HK firmware to update this because any other i have tried is not working and it says PIT FAIL when i try this solution http://forum.xda-developers.com/showthread.php?t=2613374. even though i followed the instructions step by step.
Is there another way to flash my device other than Odin? and yes ADB does not work
Click to expand...
Click to collapse
Can you screenshot your odin configuration that you flashed and post it here?
FeralFire said:
Can you screenshot your odin configuration that you flashed and post it here?
Click to expand...
Click to collapse
This is the Odin config and after the CSC was only applied the phone says PIT FAIL
con2vp1 said:
This is the Odin config and after the CSC was only applied the phone says PIT FAIL
Click to expand...
Click to collapse
Hmm.
Weird.
Do you know how to use heimdall?
Use it to have a look at your pit file and compare it to the one in the CSC zip. See what all is different.
Or just post your pit here.
EDIT: Just noticed that you have a 16GB version. I don't know how to help you there, man. You need a completely different pit file. One that is designed for 16GB. But since that model was only launched in Hong Kong, I don't think you will find one from outside, unless somebody can make one specifically for you. I have been trying to learn to do that, but as of yet, I can't.
Without a proper pit file, your only options are either wait for the Hong Kong Kitkat version or try installing the Sweet ROM.
con2vp1 said:
After updating my phone to the new firmware N9005XXUENA6_N9005OXXENA5_XEO.zip my phone failed to flash using Odin. I have tried so many version of Odin and still no luck, i have basically downloaded every rom that i can find from samsung-updates.com and still no luck. Let me know if you guys have a for fix for this because as of right now i can boot into Odin Mode but when i try to flash it via Odin 3.09 on any Rom it will fail. And yes i have tried every Samsung Kies version to try initialize this phone but it just does not work. i have attached the image of my S/N and Model this is one of the HK version and yes i tried the HK TGY rom and still no luck.
Click to expand...
Click to collapse
're using Odin with Note 3 connected to a USB 3.0? if yes, try connecting it to a USB 2.0. already happened to me a few times, and the solution was this. sorry for the bad english.
FeralFire said:
Hmm.
Weird.
Do you know how to use heimdall?
Use it to have a look at your pit file and compare it to the one in the CSC zip. See what all is different.
Or just post your pit here.
Click to expand...
Click to collapse
Well thats an issue because im not sure if this my right PIT FILE for this phone. Because usually it will go smoothly for these manual updates using Odin and this is my first encountering this error. And my fault i didnt backup my ROM which i should have done first before getting excited with this KitKat for my Note 3. That CSC file i got that from this site http://forum.xda-developers.com/showthread.php?t=2613374 and just followed instructions on how to do it, but it will just give me that error when i try to apply that method. But here's the PIT file that i got from that download.
I think its on a wrong region because i got that leaked update here http://www.sammobile.com/2014/01/13...kitkat-rolling-out-to-galaxy-note-3-sm-n9005/ and it looks like from Poland? does that matter? because my Note 3 is and HK version?
I have done so many phones rooted them and install custom roms this is the first time it failed on me. And funny thing is its my own cell phone lol
con2vp1 said:
Well thats an issue because im not sure if this my right PIT FILE for this phone. Because usually it will go smoothly for these manual updates using Odin and this is my first encountering this error. And my fault i didnt backup my ROM which i should have done first before getting excited with this KitKat for my Note 3. That CSC file i got that from this site http://forum.xda-developers.com/showthread.php?t=2613374 and just followed instructions on how to do it, but it will just give me that error when i try to apply that method. But here's the PIT file that i got from that download.
I think its on a wrong region because i got that leaked update here http://www.sammobile.com/2014/01/13...kitkat-rolling-out-to-galaxy-note-3-sm-n9005/ and it looks like from Poland? does that matter? because my Note 3 is and HK version?
I have done so many phones rooted them and install custom roms this is the first time it failed on me. And funny thing is its my own cell phone lol
Click to expand...
Click to collapse
You gave me the pit file from the zip. I was asking for the one from your phone.
But anyway I found one for the 16GB version somehwere. I am taking a look at it. Will try editing it to fit your needs. Give me a little while.
And yes, it matters, because the pit file determines the sizes of the various partitions. Since yours is a 16GB version, the pit from a 32GB won't work.
View attachment Modded_16GB.tar
Try flashing this tar file. Put it in the CSC part of the Odin.
Though I can't guarantee anything. First time, I am doing anything like this.
FeralFire said:
View attachment 2520563
Try flashing this tar file. Put it in the CSC part of the Odin.
Though I can't guarantee anything. First time, I am doing anything like this.
Click to expand...
Click to collapse
Thanks
Odin just crashed on me while it was on SET PARTITION
im trying to install stock firmware on bell im using file from sams mobile i337mvlucmk5 unzip file its in tar file i put phone in download mode and try to install file with odin and it fails. now it says odin program failled.ive reinstall the odin program same thing hellllp
ron31 said:
im trying to install stock firmware on bell im using file from sams mobile i337mvlucmk5 unzip file its in tar file i put phone in download mode and try to install file with odin and it fails. Now it says odin program failled.ive reinstall the odin program same thing hellllp
Click to expand...
Click to collapse
what version of odin do you have? And are you placing the .tar in the correct slot? What error message does it give out in that little window it wouldnt happen to fail at [nand (auth) fail!!] would it?
X_DroiD_X said:
what version of odin do you have? And are you placing the .tar in the correct slot? What error message does it give out in that little window it wouldnt happen to fail at [nand (auth) fail!!] would it?
Click to expand...
Click to collapse
im using version 3.07 im placing tar in pda it fails nan write start then fails i have repartion un checked
ron31 said:
im using version 3.07 im placing tar in pda it fails nan write start then fails i have repartion un checked
Click to expand...
Click to collapse
about the odin sayin it fail dont worry about that its based off timer after running for certain time it shuts itself off but as suppose to your file flash smh thats what i was trying to say bu yaks my friend you got yourself a bad signatures tar what exactly is the case here bro? like are your trying to unroot? or whats happening brief me on it like why your trying to reflash stock that way can help you better or least point you in the right direction you can find my contact info on my op faster response time quicker replies
if your phone happens to turn on at all navigate to about device and take a screen shot for capturing model built n baseband and add model number please carrier as well
X_DroiD_X said:
about the odin sayin it fail dont worry about that its based off timer after running for certain time it shuts itself off but as suppose to your file flash smh thats what i was trying to say bu yaks my friend you got yourself a bad signatures tar what exactly is the case here bro? like are your trying to unroot? or whats happening brief me on it like why your trying to reflash stock that way can help you better or least point you in the right direction you can find my contact info on my op faster response time quicker replies
if your phone happens to turn on at all navigate to about device and take a screen shot for capturing model built n baseband and add model number please carrier as well
Click to expand...
Click to collapse
I believe Odin V 3.09 works better. Also it must be flashed in the PDA slot
hednik said:
I believe Odin V 3.09 works better. Also it must be flashed in the PDA slot
Click to expand...
Click to collapse
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
ron31 said:
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
Click to expand...
Click to collapse
So you are using 3.07 and you can put it in download mode ? Are you then able to have the device recognized by odin ? You are then trying to flash the same firmware that came on your phone stock ?
hednik said:
So you are using 3.07 and you can put it in download mode ? Are you then able to have the device recognized by odin ? You are then trying to flash the same firmware that came on your phone stock ?
Click to expand...
Click to collapse
yes odin reconizes phone i downloaded firmware from sams mobile for bell i337m
Based of at&t, t-mbl, bell roger virgin mobile fix mk2/mj9 mdl/mi9 4.3
ron31 said:
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
Click to expand...
Click to collapse
PROCEED AT OWN RISK!!
IF THE ONLY THE DOWNLOAD IS COMING UP BRO NOTHING ELSE YOUR WHOLE FILE SYSTEM IS CORRUPTED AND UR EFS ALL GONE G YOU NEED TO DO A NAND FLASH GET YOURSELF ODIN 3.09V LEME KNO WHEN YOU GOT THAT IN THE MEAN TIME AMA GATHER SOME OF MY PERSONAL FILES FOR YOU INTO A ZIP TO HELP YOU OUT I KNO HOW THAT FEELS WAS IN YOUR SHOES THAN AGAIN EVERYBODY HAS ITS JUS TO BAD HOW SOME OF THE SENIORITY MEMBERS HERE FORGET ABOUT THERE NOOB DAYS LIKE THEY WAS BORN DEVS (NOT THAT AM SAYIN UR A NOOB) these should help you out------>>>>>>>:good:http://https://docs.google.com/open?id=0B1ZauuplxoZsYllTT3Z4YnlWc1k
X_DroiD_X said:
PROCEED AT OWN RISK!!
IF THE ONLY THE DOWNLOAD IS COMING UP BRO NOTHING ELSE YOUR WHOLE FILE SYSTEM IS CORRUPTED AND UR EFS ALL GONE G YOU NEED TO DO A NAND FLASH GET YOURSELF ODIN 3.09V LEME KNO WHEN YOU GOT THAT IN THE MEAN TIME AMA GATHER SOME OF MY PERSONAL FILES FOR YOU INTO A ZIP TO HELP YOU OUT I KNO HOW THAT FEELS WAS IN YOUR SHOES THAN AGAIN EVERYBODY HAS ITS JUS TO BAD HOW SOME OF THE SENIORITY MEMBERS HERE FORGET ABOUT THERE NOOB DAYS LIKE THEY WAS BORN DEVS (NOT THAT AM SAYIN UR A NOOB) these should help you out------>>>>>>>:good:http://https://docs.google.com/open?id=0B1ZauuplxoZsYllTT3Z4YnlWc1k
Click to expand...
Click to collapse
iok thanks bro ill try tonight
ron31 said:
iok thanks bro ill try tonight
Click to expand...
Click to collapse
ok i have odin 3.09 installed i tried to open link you put in post wont open
ron31 said:
ok i have odin 3.09 installed i tried to open link you put in post wont open
Click to expand...
Click to collapse
Did you do a checksum on the file you downloaded? I tried installing a modem on my i337m, same thing odin failed... downloaded the same file from a different source and success... unfortunately there was no md5 number on the file to do a checksum or I would have done that first.... when it comes to stuff like this I alway do checksum if the md5 is provided... (most times it is)
Gage_Hero said:
Did you do a checksum on the file you downloaded? I tried installing a modem on my i337m, same thing odin failed... downloaded the same file from a different source and success... unfortunately there was no md5 number on the file to do a checksum or I would have done that first.... when it comes to stuff like this I alway do checksum if the md5 is provided... (most times it is)
Click to expand...
Click to collapse
no how do you do that
ron31 said:
no how do you do that
Click to expand...
Click to collapse
Download checksum tool from here http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html its free. Then you find the md5 number on the site you downloaded from and use the tool to compare the numbers, typically you navigate to the directory the file is in (this gives you the md5 number, then you copy paste the md5 number from the site, then click the compare button, if they don't match your download is not good and should download again and repeat the checksum.
Gage_Hero said:
Download checksum tool from here http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html its free. Then you find the md5 number on the site you downloaded from and use the tool to compare the numbers, typically you navigate to the directory the file is in (this gives you the md5 number, then you copy paste the md5 number from the site, then click the compare button, if they don't match your download is not good and should download again and repeat the checksum.
Click to expand...
Click to collapse
hey thanks ill give it a try
I was trying to return my phone to stock since im shipping it back to samsung this week because my sim card tray is having problems. I don't really know what im doing but i did something and now my phone is stuck on a screen where it says to bring it to the att store.
Thanks
What did you try to do? Can you get into download mode? Hold home, volume down, power
Sent from my Nexus 5
max4907 said:
I was trying to return my phone to stock since im shipping it back to samsung this week because my sim card tray is having problems. I don't really know what im doing but i did something and now my phone is stuck on a screen where it says to bring it to the att store.
Thanks
Click to expand...
Click to collapse
I think you need to Get Android Phone into RECOVERY MODE and then Factory Reset...
Go to Youtube aND TYPE IN hOW TO GET ANDROID INTO RECOVERY MODE AND FACTORY RESET
rugburn said:
I think you need to Get Android Phone into RECOVERY MODE and then Factory Reset...
Go to Youtube aND TYPE IN hOW TO GET ANDROID INTO RECOVERY MODE AND FACTORY RESET
Click to expand...
Click to collapse
thank you for getting back to me. I already know how to do that and will give that a try. I still want to return my phone to complete stock. I installed a custom recovery but never flashed any custom rom's. I followed a guide on how to get it back to stock and this is how i got into this sticky situation. I used odin to upload a pit file and then a md5 file. and since that my phone is stuck at screen of a warning sign saying that there is a non stock os installed and to take it to att.
jd1639 said:
What did you try to do? Can you get into download mode? Hold home, volume down, power
Sent from my Nexus 5
Click to expand...
Click to collapse
thank you for getting back to me. Yes i can get it in download mode. I installed a custom recovery but never flashed any custom rom's. I followed a guide on how to get it back to stock and this is how i got into this sticky situation. I used odin to upload a pit file and then a md5 file. and since that my phone is stuck at screen of a warning sign saying that there is a non stock os installed and to take it to att. I still want to return my phone to complete stock.
max4907 said:
thank you for getting back to me. Yes i can get it in download mode. I installed a custom recovery but never flashed any custom rom's. I followed a guide on how to get it back to stock and this is how i got into this sticky situation. I used odin to upload a pit file and then a md5 file. and since that my phone is stuck at screen of a warning sign saying that there is a non stock os installed and to take it to att. I still want to return my phone to complete stock.
Click to expand...
Click to collapse
Do you know what firmware you're on? Flash that tar file with Odin. Don't use any pit files
Sent from my Nexus 5
jd1639 said:
Do you know what firmware you're on? Flash that tar file with Odin. Don't use any pit files
Sent from my Nexus 5
Click to expand...
Click to collapse
I am on 4.2.2 MF3 do u know where i can get that link?
Thanks
max4907 said:
I am on 4.2.2 MF3 do u know where i can get that link?
Thanks
Click to expand...
Click to collapse
Try here
http://forum.xda-developers.com/showthread.php?t=2504311
Sent from my Nexus 5
jd1639 said:
Try here
http://forum.xda-developers.com/showthread.php?t=2504311
Sent from my Nexus 5
Click to expand...
Click to collapse
okay thanks a lot i will try that later today. will let you know if it works . One last question, since i already used a pit file before... i just leave it how it is and flash theses files in the link u sent me?
Thanks in advance.
max4907 said:
okay thanks a lot i will try that later today. will let you know if it works . One last question, since i already used a pit file before... i just leave it how it is and flash theses files in the link u sent me?
Thanks in advance.
Click to expand...
Click to collapse
Yes, you'll download a .rar file, use 7-zip to extract a .tar.md5 file. Use that in PDA in Odin
Sent from my Nexus 5
jd1639 said:
Yes, you'll download a .rar file, use 7-zip to extract a .tar.md5 file. Use that in PDA in Odin
Sent from my Nexus 5
Click to expand...
Click to collapse
that file includes a boot loader file, a pda file, a phone file, and csc file... I've seen that link on another forum and heres a pic of what it says to do...
max4907 said:
that file includes a boot loader file, a pda file, a phone file, and csc file... I've seen that link on another forum and heres a pic of what it says to do...
Click to expand...
Click to collapse
I haven't extracted the file but if you get all those files do what the pic shows. I thought it would be just one tar file but as I said,I haven't used it before
Sent from my Nexus 5
jd1639 said:
I haven't extracted the file but if you get all those files do what the pic shows. I thought it would be just one tar file but as I said,I haven't used it before
Sent from my Nexus 5
Click to expand...
Click to collapse
ok it worked !
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance
uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious.
Click to expand...
Click to collapse
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol
thisisapoorusernamechoice said:
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol
Click to expand...
Click to collapse
Thanks for the advice and yes i tried towel root it tells me "This Phone isn't Supported"
uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance
Click to expand...
Click to collapse
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .
repey6 said:
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .
Click to expand...
Click to collapse
Trying this now i will let you all know how it goes.
uroboch said:
Trying this now i will let you all know how it goes.
Click to expand...
Click to collapse
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.
uroboch said:
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.
Click to expand...
Click to collapse
Please wait little . I can to give you this firmware in the night .
Ready
UPD.Strangely, some problems with the archive. try to understand
Try this . May be you can to flash this tar-archive . If no , i will search new right archive .
See last post
I will try to fix it in afternoon
downloading the tar archive now i will let you know if i have success.
Thanks
uroboch said:
downloading the tar archive now i will let you know if i have success.
Thanks
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .
repey6 said:
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .
Click to expand...
Click to collapse
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1
uroboch said:
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1
Click to expand...
Click to collapse
you flash archive from https://www.androidfilehost.com/?fid=95916177934538217 ?
That's the archive I'm using. I don't think I'm using Odin right.
uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin ZIP file
Open Odin v.3.09
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.
uroboch said:
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.
Click to expand...
Click to collapse
So , good guide . Follow him . Unfortunately install this firmware does not work.
You dont try flash only older kernel like PDA via Odin ?
I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help
uroboch said:
I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help
Click to expand...
Click to collapse
Wait little i ask guru
repey6 said:
You dont try flash only older kernel like PDA via Odin ?
Click to expand...
Click to collapse
And why exactly shouldn't they try that? That's exactly what they're doing here I even contacted the moderator to verify that. Plus I used that method to re-root after I had to Odin back to complete factory stock. I don't see what the problem is flashing just an older kernel, rooting using towelroot, and then flashing the most current kernel. That's exactly how my tablet is rooted and was on the most current firmware (OA2) before I flashed Cyanogenmod