Related
My Blackstone doesn't sync when connected to pc and also not charge either with charger or data cable Somebody plzzzzzzzzzzzz help me
:(
sakiyo6789 said:
My Blackstone doesn't sync when connected to pc and also not charge either with charger or data cable Somebody plzzzzzzzzzzzz help me
:(
Click to expand...
Click to collapse
had a similar issue which...i had to send my hd to htc, the mother baord was replaced,, make sure u turn bak to stock rom inorder for it to be under warranty
tc
Please check the following:
Unplug your device. Turn off (no standby, turn completely off by long-pressing the power button) your HD and start into bootloader mode (hold down the volume down key while pressing the power button). You should now see a screen with four coloured bars in the background (red, green, blue and white, if I'm correct). Wait a few seconds until it reads "serial" at the bottom. When it does, connect your HD to a USB port - if your USB port still works, it should switch from "serial" to "USB"! After connecting, wait a few seconds as the PC might install some drivers first...
If it doesn't switch to "USB" I would guess that your device has a hardware fault...
Good luck! Crossing my fingers!
thank yu for yours suggestion but my phone is not under warranty now and i have given all my pained earnings to purchase this ppc c and also my rom is not the original one so can anyone show me a simple way out thre to come out of this stucked ups
Sorry as i cant bear all the conditions this two of my friend shown to me sorry
but thanks to be so kind to me as im new to all this stuffs
waiting and expecting for reply plzzzzzzzzzzzzz help me out here
does anyone knows the conditions by which the mother board become defective or mini usb becomes unfunctional waiting for replyplzzzzzzzzzzzzz
not really much help, but why isnt your phone under waranty?
afaik, the touch HD didnt come (to the UK atleast) till around nov/dec 08 - less than 12months.
also, didn't you think about insuring the HD - not exactly a cheap phone?
-change USB cable - faulty?
-check 'charge via USB' is set on the phone - this wouldnt affect mains charging though
-hard-reset phone
-remove all devices from the phone (sim, battery, SDcard), leave overnight, and try to see if it will charge again in the morning
Charging when Switch off But not charging or syncing whed on
removed all devices from the phone (sim, battery, SDcard), leave overnight, and try to see if it will charge again in the morning
This Trick Worked for Me to Some Extent
Now I can Charge Blackstone By Using usb cable connected to pc but only when the mobile is switched off
When Switched on it doesnt charges
And also It doesnt sync with the pc
Plzzz Help to overcome the next step out
U R the MASTER.....Atleast for me and my blackstone
Waiting for Reply
Your phone may not sync with pc as your usb drivers may need updated. Also check that usb connections has been activated in activesync connection settings
sakiyo6789 said:
removed all devices from the phone (sim, battery, SDcard), leave overnight, and try to see if it will charge again in the morning
This Trick Worked for Me to Some Extent
Now I can Charge Blackstone By Using usb cable connected to pc but only when the mobile is switched off
When Switched on it doesnt charges
And also It doesnt sync with the pc
Plzzz Help to overcome the next step out
U R the MASTER.....Atleast for me and my blackstone
Waiting for Reply
Click to expand...
Click to collapse
You may wish to try this. Go to system settings, power settings and make sure you have unchecked "when device is turned on, do not charge the battery when connected to the PC".
Good luck
thank i will give it a try actually my blackstone battery had been emptied
Than ks ...THANKS A LOT FOR this apreciable replyzzzzzzz
is the problem in my device or on pc
is the problem in my device or on pc
becoz itried to sync my phone with many pc's it wont worked for me
it is not recoznizing my phone even after boot
Can i upgrade it to wm6.5 in this situation if yes then how???????????
plzzzz reply
is the problem in my device or on pc
becoz itried to sync my phone with many pc's it wont worked for me
it is not recoznizing my phone even after boot
Can i upgrade it to wm6.5 in this situation if yes then how???????????
plzzzz reply
sorry my server is hanging out so i repeated it
plzzzzz reply
Upgrade may fix it
i think if we assume it software(driver actually) error the reflashing to original rom or upgrading may fix this(as i have tried hard resetting)
just requiring urs opinion and the way to upgrace in this condition
thank plzzzz reply
When in bootloader does bottom of screen say 'usb' or 'serial' when connected to pc? Have you updated drivers on your pc? Have you tried using a different usb cable? When connected to either usb or charger, does LED at top of phone turn on? Changing rom shouldn't affect this, so I don't see a reason for flashing a new rom just for this.
Same issue
I had the same problem, sent the fone for warranty, which is replaced now..............
Ok but i want to just know can i upgrade or not
sakiyo6789 said:
Ok but i want to just know can i upgrade or not
Click to expand...
Click to collapse
You should still be able to upgrade/flash new rom as long as you follow correct procedure by using either USPL or HSPL
plzzz can any1 redirect me to the lnk from were i can informatn about upgrading in this condition
plzzzz tell me hoe to flash USPL HSPL
PLzzzzzzz
Help a blacston is dieing
plzzz can any1 redirect me to the lnk from were i can informatn about upgrading in this condition
plzzzz tell me hoe to flash USPL HSPL
PLzzzzzzz
Help a blacston is dieing
Hi, I have HTC X7500 with a very serious problem. It has SPL 1.20 Olipro. The thing is that it can't get to windows mobile. When i plug it in the USB the trackball gets red and if I take the battery out and the in in turns yellow and the device gets into 3-coloured mode. It's not detected also by the computer. What can I do? Is there anyway to get everything back to normal, to restore original ROM ot firmware, wahtever it's called? Thanks!
?dead battery?
sharky56 said:
Hi, I have HTC X7500 with a very serious problem. It has SPL 1.20 Olipro. The thing is that it can't get to windows mobile. When i plug it in the USB the trackball gets red and if I take the battery out and the in in turns yellow and the device gets into 3-coloured mode. It's not detected also by the computer. What can I do? Is there anyway to get everything back to normal, to restore original ROM ot firmware, wahtever it's called? Thanks!
Click to expand...
Click to collapse
Hi Sharky.
I would hazard a guess and say the battery is stuffed.
The battery is renowned for having problems getting good contact so the first thing I would do is leave it off and plug it into the wall charger then fiddle with the battery to make sure it is making contact and charging.
If it gets to geen light then try booting.
If not ,it is then possible to flash from SD card.
Let me know how you go.
If the battery is out, I can't do anything, the LED is always RED. If the battery is in, the LED is still RED, but sometimes I can get into bootloader (3-coloured screen). What's the thing with the flashing from SD card?
sharky56 said:
If the battery is out, I can't do anything, the LED is always RED. If the battery is in, the LED is still RED, but sometimes I can get into bootloader (3-coloured screen). What's the thing with the flashing from SD card?
Click to expand...
Click to collapse
I just checked on my old athena.
When it is turned off and plugged in the light is orange untill it is fully charged and turns green.
If the battery has a poor connection it stays red.
I have an old battery that doesn't work and the light stays red.
So I would say you have a poor connection to the battery or the battery is dead.
I would not attempt to flash anything till you have a functioning battery.
Yeah, thanks, I've finally managed to reinstall ROM and the light when the battery is in is now orange. But I have another problem: when I plug in the USB cable the device gets gets very slow and freezes sometimes. Also the WiFi isn't working, but the bluetooth does so I think it's a software, not hardware, problem. Can you give me link to the original athena (x7500 advantage) ROM so that I can try with it. And one last thing: when I plug it in the computer via USB, Windows 7 doesn't seem to recognize the device, the Windows Mobile Device Center can't connect to the device. I appreciate your help till now and I hope you'll continue helping me to solve my problems. Cheers!
the corrupt wifi is a known issue wiith upgrade problems
this is the fix
http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
have a look through the wiki for various files
http://forum.xda-developers.com/wiki/index.php?title=HTC_Athena
a lot of the links don't work anymore
also have a look at the stickies in the upgrading section and doing a search using variations on your question usually finds an answer
ps
this phone was originally released when xp was the main OS so try finding an old laptop that uses this if you want to upgrade to AP4 to get SPL 3.5.
Have a read of the beginners guide as well
cheers
I've tried that fix but it doesn't help. It's obviously hardware, so I'm taking it to the service. Thanks anyway!
My HD2 quit working.
When I power it up it goes to the magldr screen and beeps 7 times then freezes.
I know that if a desktop computer beeps 7 times it means the CPU or mother board may be bad. are the cell phone beep codes the same?
If I boot to HSPL it comes up with serial and when I plug in the USB the computer says USB device not recognized.
Other than throwing off a cliff, does anyone have any ideas?
Thanks
Try a difffernt usb port and cable, there are options to update/flash via the sd card, just search.
The cliff option, only provides short term satisfaction, in the long term I recomment the above options
try the search feature
Also, have you been doing some battery pulls lately? If yes, then ckeck your battery pins .. they may be bent. Otherwise, come to the monitors for a debrief . I meant follow the above post .
You can try different USB ports and see if that helps or even reinstall Active Sync or Windows Mobile Device Center depending on what version of Windows you are running on you computer. But to be honest with you it does seem to be a corolation between the 7 beeps or 7 vibrations and a bad processor or main board. So to me it sounds like you need to get it replaced if you still have warranty on it. If not the cliff is up to you, lol.
Hello every one,
When I plug my Omnia 7 with my laptop, it appears the message "USB Device Not Recognized. Unknown Device (Code 43)." I have tried different ways posted in this forum but non of those worked. I tried to restart my pc, plug off battery, hard format my phone, tried in different laptops, and the other methods, but non of those worked.
I need help please if anyone could tell me what to do I would appreciate.
Try reinstalling zune, maybe even reinstalling sammy usb drivers.
Sent from my OMNIA7 using XDA Windows Phone 7 App
I have to say .... we can spend hours understanding these windows phone
I do not know why a windows phone cannot be synced with a windows computer. Am having the same problem. My device appears as unknown device in Device Manager. I tried to update the drivers from Zune folder, but it does not find the correct drivers there. Any help would be so appreciated.
Thanks a lot.
i had the same problem in my omnia 7 very recently.
followed the below steps now it si working
Reset the phone
Restored the back up i had (older version)
upgraded to latest version 7.10 (8773)
worked fine for some time. Now i am facing another problem, if i remove charger/usb cable, it behaves like Cable is connected and Disconnected continuosly
Shows charging icon (even if cable is removed), and notification sound coming continuosly,
as of now i am living with it in Vibration mode
Fitimm said:
Hello every one,
When I plug my Omnia 7 with my laptop, it appears the message "USB Device Not Recognized. Unknown Device (Code 43)." I have tried different ways posted in this forum but non of those worked. I tried to restart my pc, plug off battery, hard format my phone, tried in different laptops, and the other methods, but non of those worked.
I need help please if anyone could tell me what to do I would appreciate.
Click to expand...
Click to collapse
I have the same problem, if someone finds a solution please keep me informed too. Thanks in advance
All you can do is to cross your fingers and pray
Cause mine started working one day out of no where .... so i think with MicroSoft products, everyithing is based on pure luck
I think I can help - it may be the BATTERY!
Hi - I stumbled on this thread by accident but had a very similar problem - I will look up the Whirlpool thread where I wrote about it as it was a while ago - but similar symtoms all fixed by replacing battery. _ i dropped my Ominia briefly into water.
Here's what I wrote in Whirlpool forum on 2011-Oct-31 (can't post link as new member) Thread Title "Samsung Omnia 7 i8700 - Part 2"
My beloved Omnia 7 took a very quick dip in the pool on the weekend. Life lesson learnt: "Do not put phone in top pocket as it will fall out."
Anyhow I grabbed it straight away and turned it off – dried it off etc – I was amazed it booted and runs BUT things are not good.
� Phone works normally (all functions, wifi, apps, OS etc.) on external charge either AC or PC USB
� Phone works normally on battery, but it keeps playing an alert chime, will not sleep, and in Settings / Battery Saver it flashes on this screen � and it does not sleep as whatever it�s alerting on prevents idle.
� Goes to sleep when on AC/USB charge.
� After plugging into AC/USB, and unplugging from AC/USB, phone runs normally, believes it is being charged, does not play alert chime, but does not sleep
� Does not interface with PC via USB � plug into USB causes �USB Device not recognised� (tried different cables/PC�s)
� Does enter download mode, but USB not available.
At a long shot, it may be the battery. I know I could buy online (risk it won't be the issue). All I need to do is a quick battery swap test but need a spare battery.
WHAT A MESS. Let me know if you are a Brisso and wouldn't mind sharing your battery for 5 mins....
If replacing battery fixes the problem then GOD knows what Engineering Samsung/Microsoft is upto
� Phone works normally (all functions, wifi, apps, OS etc.) on external charge either AC or PC USB
� Phone works normally on battery, but it keeps playing an alert chime, will not sleep, and in Settings / Battery Saver it flashes on this screen � and it does not sleep as whatever it�s alerting on prevents idle.
� Goes to sleep when on AC/USB charge.
� After plugging into AC/USB, and unplugging from AC/USB, phone runs normally, believes it is being charged, does not play alert chime, but does not sleep
� Does not interface with PC via USB � plug into USB causes �USB Device not recognised� (tried different cables/PC�s)
� Does enter download mode, but USB not available.
At a long shot, it may be the battery. I know I could buy online (risk it won't be the issue). All I need to do is a quick battery swap test but need a spare battery.
WHAT A MESS. Let me know if you are a Brisso and wouldn't mind sharing your battery for 5 mins....
Click to expand...
Click to collapse
I had the same prob here and windows can not recognize my Omnia 7 any more after it caught rain.
I had the same problem on my Windows 7 (64 Bit)
Unknown usb Device , lot of posts have found and at the end it was USB-Cable !!!
The problem was in the length of the cable, with long (1m cable) i can flash but no connection over Zune, after i take cable from my Nokia 15 cm short cable it works without any problems.
misko2k said:
I had the same problem on my Windows 7 (64 Bit)
Unknown usb Device , lot of posts have found and at the end it was USB-Cable !!!
The problem was in the length of the cable, with long (1m cable) i can flash but no connection over Zune, after i take cable from my Nokia 15 cm short cable it works without any problems.
Click to expand...
Click to collapse
I tried all cables, SS, Noikia, Kindle... none worked
What Windows are you using, do you have original ROM on your Omnia ?
For example if you are using some other rom than original , that there you have changed settings for USB port (In Diagnose Mode you can check this)
I am on original German T-Mobile ROM, exact same issue, no cure for now. Looks like an end of life for old good Omnia ...
But I did force update both 8112 and 8773 yet before ZUNE actually suggested the update .So not really in a position to complain.
But if anybody here did a "fully legal" ZUNE update (no flash no forced) then it means that the update itself is a problem and MS / SAMSUNG are responsible (not that it ever changed). Did anyone on OEM ROM with the issue upgrade in a fully clean way ?
Just now noticed - this is similar to the problems mentioned in another 2 threads hot here - just in another case people experienced only annoying "alert ringing". Looks like some of us get hit more severe, others less. XDA gurus - PLEASE spend time on this ! This looks as a massive desease case, last hope is XDA.
http://forum.xda-developers.com/showthread.php?t=1756990
http://forum.xda-developers.com/showthread.php?t=1761402
UPDATE : after all, this was not software related issue. USB port got rust, 70$ to replace it - all troubles gone, connects to PC and no alarm.
Fitimm said:
Hello every one,
When I plug my Omnia 7 with my laptop, it appears the message "USB Device Not Recognized. Unknown Device (Code 43)." I have tried different ways posted in this forum but non of those worked. I tried to restart my pc, plug off battery, hard format my phone, tried in different laptops, and the other methods, but non of those worked.
I need help please if anyone could tell me what to do I would appreciate.
Click to expand...
Click to collapse
to connect tour omnia W to pc, download latest zune softwRE
Now go th your phone dialer and dial ##634#
wait for some time....another dialer screan will appear.....now dial *#7284#
Now select Modem,tethered call(may be second option )
Your phone will restart
Now connect your phone thru data cable............
Hi,
So i Had this Htc HD2 . I got it as a gift from USA. I've used it like 2/3 month. I installed MIUI rom on this device. And then i hot another phone and didn't used that phone anymore. But today i found this phone and i tried to turn it on. Then I saw that the phone isnt turning on. It just stays black and just vibrates. I dont know what is wrong with this. I live in Bangladesh. We dont have any HTC customer service stores here. So i need help with this. If anyone can Help please let me know. and by the way its TMOUS HD2.
Check battery pins are contacting correctly.
Check battery voltage - lower than 3.2V try charging the battery externally & not in the HD2, if you do not have an external charger you can use a USB cable & cut mini/micro usb plug off then touch the red+ & black- wires to + - battery terminals for about 1 minute or bit longer if battery completely flat then put it back in HD2 & see if can boot.
tusher.rozario said:
Hi,
So i Had this Htc HD2 . I got it as a gift from USA. I've used it like 2/3 month. I installed MIUI rom on this device. And then i hot another phone and didn't used that phone anymore. But today i found this phone and i tried to turn it on. Then I saw that the phone isnt turning on. It just stays black and just vibrates. I dont know what is wrong with this. I live in Bangladesh. We dont have any HTC customer service stores here. So i need help with this. If anyone can Help please let me know. and by the way its TMOUS HD2.
Click to expand...
Click to collapse
Are you sure it's not just out of battery? If it had NAND Android installed on it via MAGLDR and you didn't bother turning it off then it could have just run out of charge. Since you can't charge the phone when it's off in MAGLDR, you'll have to cut open a USB cable which hopefully @samsamuel will come along and tell you about since I always forget what has to be connected where.
If you know it isn't the battery, then can you boot into the bootloader (hold vol down + power)? If you can get to that then you can try flashing a WinMo stock ROM to confirm it isn't some sort of hardware issue.
Mister B said:
Check battery pins are contacting correctly.
Check battery voltage - lower than 3.2V try charging the battery externally & not in the HD2, if you do not have an external charger you can use a USB cable & cut mini/micro usb plug off then touch the red+ & black- wires to + - battery terminals for about 1 minute or bit longer if battery completely flat then put it back in HD2 & see if can boot.
Click to expand...
Click to collapse
Tried that. Nothing happened. The phone just constantly vibrates.
Nigeldg said:
Are you sure it's not just out of battery? If it had NAND Android installed on it via MAGLDR and you didn't bother turning it off then it could have just run out of charge. Since you can't charge the phone when it's off in MAGLDR, you'll have to cut open a USB cable which hopefully @samsamuel will come along and tell you about since I always forget what has to be connected where.
If you know it isn't the battery, then can you boot into the bootloader (hold vol down + power)? If you can get to that then you can try flashing a WinMo stock ROM to confirm it isn't some sort of hardware issue.
Click to expand...
Click to collapse
I wasnt sure if it was battery or not. And then i recharged the battery with a external charger and tried to turn it on. But no luck. it stays just the same. and i cant even get into boot loader (tri color screen). NO nothing. it just vibrates.