Database Users

[Q] Unusual symbol: Phone -- ! -- Computer

So, I've been trying to restore my phone after some modding gone bad...but now, I've gotten to the point where I can't even get to the green battery screen. My phone won't turn on, and it'll only display this screen with a phone icon connecting to a yellow triangle which is connecting to a computer.
Has anyone gotten this before?
More importantly, is this fixable? Or am I gonna have to file an insurance claim for a "phone that got dropped in a lake" this week?

Use the search option. It will do wonders. This has happened plenty of times before. ODIN can fix the problem.

1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen
IF the phone screen does show the battery charger or something else on the screen after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
Click to expand...
Click to collapse
then.. http://forum.xda-developers.com/showthread.php?t=734475&highlight=stock

The best luck i had getting my phone into download mode was pulling the battery, putting it back in. holding vol up+down and plugging it in. instead of going to charging, it goes to download immediately.

All messages related to "3 hardware key combo to get back to download mode so that you can use ODIN to restore", or "use adb to get to download mode so you can use ODIN" only work when the 3 hardware key combo work in the first place, or your PC can recognize the phone for adb to work
I am one of the unlucky one that does not have this 3 hardware key combo working, and am also in this sad state (Phone-!-PC). As a result, PC is not seeing the phone, so adb is out of the question right now
My phone has been like this since last Thursday (a failed attempt to use ODIN to flash JAC's OC/Ext4 kernel). All my reading so far does not give me a fuzzy feeling that I can ever get back to Download mode (ON MY PHONE)
I called my carrier for a replacement, and it should arrive this morning...
If someone can actually get to download mode WITHOUT the 3 hardware key combo OR adb access, I would love to know how

Had the EXACT same problem. Here is how I fixed it:
http://forum.xda-developers.com/showpost.php?p=7640152&postcount=4

Glad that this work for you
But not for me, for some unknown reason
No SIM
No SD Card
Pulled battery out
Make sure screen is off
Put battery in
Hold Volume up/down
plug USB cable to phone
plug USB cable to PC
Bam! Phone-!-PC
Update: Got my replacement phone.
Have SIM in
Have SD Card in
Leave Battery in
Turn off Phone
Hold Volume up/down
plug USB cable to phone
plug USB cable to PC
Instant Download mode!
Just as I read, it's a luck of the draw whether you have a TMobile Vibrant that has the 3 button key combo disabled. My first one doesn't have it. My second one does

My Epic came unplugged, now its bricked.

If this is asked else were I apologies as I did a search but could not find anything. Short story, my Epic came unplugged before Odin3 finished. Now I cannot get the phone to power on. It will not go into download mode or recovery. I pulled the battery and hit vol. up and power, but nothing happens. I am just about sure there is no hope for the phone, but it is worth a shot. Does anyone know if it is possibly to fix a bricked phone that will not turn on?
Thanks

Will it go into download mode again? do a battery pull and try to go back to download mode. does the samsung logo show when you boot the phone?

I pulled the battery, and still nothing. When I try to power it never comes to life, no logo nothing its like I do not have a battery in it when I hit the power button, but the battery is fully charged.

Art2Fly said:
Will it go into download mode again? do a battery pull and try to go back to download mode. does the samsung logo show when you boot the phone?
Click to expand...
Click to collapse
Download mode: Slide out the kbd, hold the 1 key, press and hold the power button on the side until you get the download screen with the yellow caution triangle and the ditch digger guy...

Holding power and 1 also does nothing.

I think pulling the plug while ODIN is running is literally the only way you can brick this phone, other than running it over with a car.

Did you have full batterywhen you started? Does odin recognize the com port when you plug the phone in?
Sent from my SPH-D700 using XDA Premium App

I did have full batterywhen I did it, but I was using my laptop and went to move causing my phone to fall and become unplugged before it was finished. I just tried plugging in the phone again and nothing came up Odin did not recognize it.

I have had to unplug the phone while odin was running several times because it stopped progressing with the flash. I have been lucky enough to never have a total brick. I would suggest pulling the battery and hitting keys on the keyboard to ensure the power is completely drained, the putting in the battery while holding the 1 key and power.... Always does the trick for me.
You are making sure the phone its in download mode and odin is running before plugging your phone in, right?
Sent from my SPH-D700 using Tapatalk

Oh my; that sucks. I hope you can get it replaced without any issues.
Good luck, with the next one. Tie it to the desk during the Odin process.

You said you pulled the battery then hit Vol. Up and power...
To get into recovery you need to hit Vol. Down + Camera + Power (hope you had a Backup)

Even after pulling the battery it still will not come back to life. I was at the sprint store and told them that I was doing the over the air update and this is what happened. The tech told me that he has seen a few Epics turn into bricks because of the update went wrong. I will have a new one on Monday but it was worth a try to see if there was a fix since the phone they let me use sucks. Now I will be a little scared putting roms on my phone once I get my new one. Thanks for the help anyway.

Jase3040 said:
Now I will be a little scared putting roms on my phone once I get my new one. Thanks for the help anyway.
Click to expand...
Click to collapse
Don't be. What happened to you is next to impossible. If you don't chuck your phone around while Odining, it won't happen again.

k0nane said:
Don't be. What happened to you is next to impossible. If you don't chuck your phone around while Odining, it won't happen again.
Click to expand...
Click to collapse
Yes... ODIN + ADHD is not a good combination

Your phone is not bricked. I had this scenario happen to me. The way I got the phone working again is to take the battery out and then plug the USB cable in. At that point I was able to have the keyboard open, hold down the 1 key+power and the phone went in to dload mode. It worked for me, I am betting it would work for you.

I forgot to mention, leave the battery out of the phone while doing this.

Socos25 I have to say I had hope for this, but I still have the same problem…… however, still nothing but a blank screen that is darker then the bottom of the ocean.

I feel your pain, buddy.
I hate to admit it, but I did the same thing when my phone was 29 days old. In my case I think I started by using the wrong PID file and the process hung. I got worried and unplugged the phone after about 2 minutes. I tried every combination possible to get the phone to wake up but each time it got worse. There was no way to get it back into download mode.
I ended up taking it to a Sprint service center. The tech was sure he could reflash it, but after 20 minutes he came back and said it was dead. Since it was under 30 days they gave me a new phone. Thank you Sprint.
Anyway, I'm pretty nervous these days when using Odin. It IS possible to brick this phone using Odin (as we both know). When I use Odin now I triple check every step, do it on a laptop with a full battery, put the phone down and step away from it until it's finished.
It's likely that if you take it to a Sprint service center they will replace it for a $35 fee. That may be your only option at this point.

Thinking back.. Pull the battery, hold down the power button for like 10 seconds. Then with the battery out of the phone plug in the USB cable. try the 1+power button.
I am pretty sure tha is how I got mine back after I accidently dropped the phone when odin'ing. Does the LED light up when you plug in the usb cable?

I've pulled my phone over 20 times turing an ODIN process to try and brick it. It just doesn't happen with these Samsung phones. You may get stuck at the Samsung screen, but chances are if that you battery is either dead or you keyboard is broken. Cause through 5 phones with trading I can't seem to brick one.

Bricked?

Editing this as I'm desperate for help and things have moved on since I first posted, below is where I am up to post 11 of this thread.
I flashed Vegacomb b (exe), it restarted but stayed on the warning about paying for vegacomb for 10-15 minutes which didn't seem right so I held power for 6 seconds and it turned off. After that it would never turn on or go into recovery (I know all the methods, none worked).
Today I unhooked the battery, when I plug the battery back in the screen comes on for a second but then it's as it was, unresponsive. HOWEVER, if I plug the mains in with the battery disconnected then it immediately tries booting but still sticks at the warning (left for over 20 minutes). If I plug the battery in while on this screen then remove the mains it stays on. The power button is unresponsive through this so I still cannot get into recovery.
Any more ideas that haven't been mentioned?
I've tried well over 100 times to get into recovery but it's not happening
anyone willing to have a go at fixing (cheaply!) if I send them it?
Original Post:
Hi guys, just managed to (re?) install Vegacomb (b, from exe), it restarted but stayed on the white screen with the warning text about paying for Vegacomb for over 10 minutes so I held down the power button to turn it off, now I cannot do anything to boot it up (tried holding power button down from 0.5 seconds to 60 seconds!), it also won't boot into recovery. Is there anything at all that can be done to get this going?
cheers

OK, I've tried holding down back while plugging in (fully charged btw), tried all variations of button presses with back and power, with and without USB, with and without power cable.
Only got until 10PM (UK time) to get this sorted (it's now 6PM) so any help/advise would be appreciated

Flash back to modded stock then try again.
From modded stock go app drawer and run recovery
From recovery wipe data, cache then go advance then wipe dalvik
Then press back
Then install zip from SD
Choose vegacomb from whatever directory on your SD you copied it to then confirm
If you ain't Got Vegacombe zip then download it.
Or you could run the .exe again but the above is my preferred method.
Also you might need to download modded stock v2 if you ain't already got it.
Good luck.

intel007 said:
Flash back to modded stock then try again.
From modded stock go app drawer and run recovery
From recovery wipe data, cache then go advance then wipe dalvik
Then press back
Then install zip from SD
Choose vegacomb then confirm
If you ain't Got Vegacombe zip then download it.
Or you could run the .exe again but the above is my preferred method.
Good luck.
Click to expand...
Click to collapse
??
the Vega won't turn on and won't go into recovery, cannot flash anything, nothing comes up on PC, tried all variations of the back and power buttons (inc back, plug in power & usb, press power, leave 2 seconds and release back) over 100 times. it's like it's dead.
the only thing it does is show a blue LED when I plug the power cable in

I've read that if you got less than 50 or 60% battery it wont go into flash mode (back button 2 seconds - power & back 2 seconds)
Have you got enough battery cause mine takes half a day to charge.

intel007 said:
I've read that if you got less than 50 or 60% battery it wont go into flash mode (back button 2 seconds - power & back 2 seconds)
Have you got enough battery cause mine takes half a day to charge.
Click to expand...
Click to collapse
100% (solid blue LED), been on charge for over 24 hours

I'm baffled mate, I've had same issue couple of times but after 10mins or so I've always got it to power back on.

Bricked
I've had the same problem and although quite drastic, remove the rear cover and unplug the battery connection (the multipin one with red and brown/black wires).
With the mains plug out,i found that if you press volume up and power with the wires unplugged and leav eit for a few mins then use back + power it will start as you need it to.
It may take a few tries but i have managed to do it following this procedure about 7-8 times.
Hope this helps.
DAve

I had trouble getting into recovery when the Vega was 100% charged (i.e. charge led was solid blue). When I let it discharge a little so it was flashing with the charger plugged in, I managed to get into recovery then.

dmarchant said:
I had trouble getting into recovery when the Vega was 100% charged (i.e. charge led was solid blue). When I let it discharge a little so it was flashing with the charger plugged in, I managed to get into recovery then.
Click to expand...
Click to collapse
I can't discharge it though as it doesn't turn on, left it 14 hours from last night, back at work again now and it still says fully charged
got the battery disconnected now to give it a try

Disconnected battery for around 10 minutes, put it all back together, still can't boot or get to recovery
EDIT: it works when the battery is disconnected (goes to the Vegacomb warning screen but no further, cannot power off or get to recovery still)
any ideas?

Anyone got any ideas?
it's meant to be unbrickable from what I've read so there must be a way around it but I'm out of ideas!

its user error. remeber to put it into recovery mode you need the power cable plugged into it too as well as usb.

slybunda said:
its user error. remeber to put it into recovery mode you need the power cable plugged into it too as well as usb.
Click to expand...
Click to collapse
Cheers, but its not user error. I'm not that stupid

Hi, this may not help but i had trouble flashing the stock rom because of the battery being fully charged, could only get the screen to light up so left it over night and then went through the normal routine and got into recovery.
Bill

Hi there
Just one question, how do you know for sure it hasn't gone into nvflash mode?
I know what you are going through trying to get the ruddy thing into nvflash, it's a mare if you don't quite get that timing right but seeing as the screen doesn't light up when it's in nvflash what is telling you whether you are actually in it, other than the screen coming on to say you are not or relying on a windows message?
As I said I had the same problems many a time but I use Audi tool now to tell me if nvflash has started, I got it off the Modaco forum, but when you are in nvflash it actually tells you so rather than relying on perhaps windows to tell you it has happened
If you haven't come across the audi tool before then just do a search for it on Modaco, I don't know if they have got it here on XDA.

mmace said:
Anyone got any ideas?
it's meant to be unbrickable from what I've read so there must be a way around it but I'm out of ideas!
Click to expand...
Click to collapse
wow, i'm quite surprised by the number of people who are taking their batteries out when they think there is a problem. You should never need to do this unless it is actually faulty.
Ok yes the Vega is nearly indestructible I have had my in a complete mess many times and have never had to do anything that hard to recover. Some times it will be a pain to get into nvflash mode but this can always be done just have to be patient and know a couple of tricks.
If you have tried the back button and then the power a few times and nothing there is another method.
Instead unplug the power then hold the back button down, whilst holding down the back button plug in the power release the back button after a couple of seconds (I like to count to 5)
I am hoping that you already have the USB cable connected and the right drivers installed on your PC.
Billy..
If you need more help head over to TabletRoms and look in the Vega forum (sorry XDA guys just there is a lot of other useful information there)

wks said:
Hi, this may not help but i had trouble flashing the stock rom because of the battery being fully charged, could only get the screen to light up so left it over night and then went through the normal routine and got into recovery.
Bill
Click to expand...
Click to collapse
I've tired fully charged and letting the battery drain for 40+ mins after it's been on the "warning" screen
mitt69 said:
Hi there
Just one question, how do you know for sure it hasn't gone into nvflash mode?
I know what you are going through trying to get the ruddy thing into nvflash, it's a mare if you don't quite get that timing right but seeing as the screen doesn't light up when it's in nvflash what is telling you whether you are actually in it, other than the screen coming on to say you are not or relying on a windows message?
As I said I had the same problems many a time but I use Audi tool now to tell me if nvflash has started, I got it off the Modaco forum, but when you are in nvflash it actually tells you so rather than relying on perhaps windows to tell you it has happened
If you haven't come across the audi tool before then just do a search for it on Modaco, I don't know if they have got it here on XDA.
Click to expand...
Click to collapse
I have Audi, I also have Device manager open, I know 100% it's never gone into recovery mode sine I started with this problem.
BillyFish said:
wow, i'm quite surprised by the number of people who are taking their batteries out when they think there is a problem. You should never need to do this unless it is actually faulty.
Ok yes the Vega is nearly indestructible I have had my in a complete mess many times and have never had to do anything that hard to recover. Some times it will be a pain to get into nvflash mode but this can always be done just have to be patient and know a couple of tricks.
If you have tried the back button and then the power a few times and nothing there is another method.
Instead unplug the power then hold the back button down, whilst holding down the back button plug in the power release the back button after a couple of seconds (I like to count to 5)
I am hoping that you already have the USB cable connected and the right drivers installed on your PC.
Billy..
If you need more help head over to TabletRoms and look in the Vega forum (sorry XDA guys just there is a lot of other useful information there)
Click to expand...
Click to collapse
TabletRoms has been no help for me, there's been no reply at all for my problem but there has here and at MoDaCo. I pulled the battery as a last resort as NOTHING is working, I've tried all the tricks at least 2 dozen times, some a hundred +, including the one you mention

Well I don't want to teach you to suck eggs, but I take it you did use Audi to delete and replace your drivers.
And then when powering on the Vega you held the back button for 2 secs and then the back and power buttons for 6 secs to get the Vega detected?
For me I can only see that there can only be 3 other possible causes
1./ the back button is broken on the vega
2./ The USB port on your PC or on the Vega has gone up the swanee
3./ The USB lead is no good
The Vega may be unbrickable but if the back button or the USB port has had it then .....

Yeah, tried it, cheers.

Please Help! LG G2 Won't Boot Up

I had rooted my dad's lg g2( D802) and installed twrp using an app named autorec as it was recommended by many people in the internet and had very high ratings and downloads in the play store. Everything was fine for a few weeks till I noticed that the app had an update. So I flashed twrp again from the app hoping it was a newer version and it said it completed the operation successfully. Then I just used the phone for sometime and after that I switched off the phone to enter the recovery. After it switched off, I pressed the button combination for entering the recovery but nothing came up. Then I attempted to just boot the phone and kept pressing the power button but nothing came up. I even kept pressing the button for upto a minute to hard reboot it in case it was just a case of hanging but nothing came up.After that, I plugged it in for charging and attempted to boot again. After I kept pressing the power button for about 30 seconds while charging, the led blinked red 8 times, paused and repeated itself as long as I kept holding the power button.
The problem is that it even the screen doesn't turn on.
I searched for this issue and saw that many others were facing this issue. I tried the following solutions given by them which did not work:
1) Holding the power button for a long time
2) Keeping it for charging until it's full but nothing comes up and the phone got heated up very much untill I stopped it a few hours later.
3) Removing the back cover and detaching the battery power cable from the phone after after waiting for sometime, reattaching it.
My dad showed it to the lg repair centre but they told him they need to replace the whole board which is very expensive, especially considering that it is a 2+ year old phone. My dad is very angry at me and probably won't let me touch his phones ever again if I don't fix this. Please help me.
Thanks in Advance
Edit: the charge was at 45% when I switched it off. Don't think it is because of low battery

With the phone pluggged into your computer, does the computer recognize the phone? And if yes, what does Device Manager report it as being?

arvindr07 said:
I had rooted my dad's lg g2( D802) and installed twrp using an app named autorec as it was recommended by many people in the internet and had very high ratings and downloads in the play store. Everything was fine for a few weeks till I noticed that the app had an update. So I flashed twrp again from the app hoping it was a newer version and it said it completed the operation successfully. Then I just used the phone for sometime and after that I switched off the phone to enter the recovery. After it switched off, I pressed the button combination for entering the recovery but nothing came up. Then I attempted to just boot the phone and kept pressing the power button but nothing came up. I even kept pressing the button for upto a minute to hard reboot it in case it was just a case of hanging but nothing came up.After that, I plugged it in for charging and attempted to boot again. After I kept pressing the power button for about 30 seconds while charging, the led blinked red 8 times, paused and repeated itself as long as I kept holding the power button.
The problem is that it even the screen doesn't turn on.
I searched for this issue and saw that many others were facing this issue. I tried the following solutions given by them which did not work:
1) Holding the power button for a long time
2) Keeping it for charging until it's full but nothing comes up and the phone got heated up very much untill I stopped it a few hours later.
3) Removing the back cover and detaching the battery power cable from the phone after after waiting for sometime, reattaching it.
My dad showed it to the lg repair centre but they told him they need to replace the whole board which is very expensive, especially considering that it is a 2+ year old phone. My dad is very angry at me and probably won't let me touch his phones ever again if I don't fix this. Please help me.
Thanks in Advance
Edit: the charge was at 45% when I switched it off. Don't think it is because of low battery
Click to expand...
Click to collapse
more info... what variant? phone does not boot.. can you press vol up then plug phone .. does download mode works... stay calmed this can be fixed..:fingers-crossed:

I haven't tried plugging it to the computer. The way to enter download mode is holding the volume up button right? Thank you for the suggestion. I'm away for a few days but I'll tell my dad to do so. I'll post what happens then. Variant is D802

OK I told him to do that. When he pressed the volume up button and then plugged it to his computer, 13 new partitions showed up in windows, and it is telling him that he needs to format the positions to use it. But nothing is coming up on the phone

Do NOT let Windows format the partitions(!)
Use the SRKTool instead to unbrick from qhsusb_bulk mode:
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Afterwards use LG Flash Tool 2014 to flash the KDZ for your variant:
http://forum.xda-developers.com/showthread.php?t=2432476
It's better to let the battery charge to full first. Shut down the phone by holding PWR button for 10 seconds, then plug charger. It should work even in bulk mode.

Did you try these simple things...
shutdown phone keeping powerbutton down.
Start pressing power button & vol down....when you see LG logo for couple seconds. Release fingers and press vol UP and vol DOWN, same time. No power button.

MB525 said:
Do NOT let Windows format the partitions(!)
Use the SRKTool instead to unbrick from qhsusb_bulk mode:
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Afterwards use LG Flash Tool 2014 to flash the KDZ for your variant:
http://forum.xda-developers.com/showthread.php?t=2432476
It's better to let the battery charge to full first. Shut down the phone by holding PWR button for 10 seconds, then plug charger. It should work even in bulk mode.
Click to expand...
Click to collapse
But the problem is, even the screen doesn't turn on while on download mode. I'll surely try out the unbrick tool but will it work since normally, the download mode screen comes up. That thing is 760mb. I think it'll take some time for it to finish. (Ultra slow internet connection )

mal13 said:
Did you try these simple things...
shutdown phone keeping powerbutton down.
Start pressing power button & vol down....when you see LG logo for couple seconds. Release fingers and press vol UP and vol DOWN, same time. No power button.
Click to expand...
Click to collapse
The lg logo doesn't come up when I do that. If fact, even the screen does not turn on

Thank you guys! Srk tools worked! Again thank you very much

Axon 7 Bricked To Hell

Hello All,
Yesterday I dropped my phone and the power button got stuck. I opened the phone with my tools and was able to fix the button. I didn't power it off, I didn't think it was needed since the button itself has nothing to do with the electronics inside. While I was closing its back It suddenly turned off. I was very gentle, didn't do any fast or unsafe moves. Since then the phone shows no sign of life. I plugged the phone the my pc but there wasn't any sign of life either. The phone didn't show up on Device Manager or anywhere else. One time, I heard a connection sound but I am not even sure if it was because of the phone since the sound came like 5 minutes after I plugged in the phone.
I already tried pressing all 3 buttons for a long time but it didn't do anything.
So what do you think? What might have caused it? And can you help me?
Thanks

First thing i would do is tear down and disconect/conect the battery flat. After that, hold volume keys while conect to pc usb and see if you can get edl mode. Than flash all that has to be flashed with miflash and edltools.

brunojborges said:
First thing i would do is tear down and disconect/conect the battery flat. After that, hold volume keys while conect to pc usb and see if you can get edl mode. Than flash all that has to be flashed with miflash and edltools.
Click to expand...
Click to collapse
Thank you, I will try that when I get back to home.