I had rooted my dad's lg g2( D802) and installed twrp using an app named autorec as it was recommended by many people in the internet and had very high ratings and downloads in the play store. Everything was fine for a few weeks till I noticed that the app had an update. So I flashed twrp again from the app hoping it was a newer version and it said it completed the operation successfully. Then I just used the phone for sometime and after that I switched off the phone to enter the recovery. After it switched off, I pressed the button combination for entering the recovery but nothing came up. Then I attempted to just boot the phone and kept pressing the power button but nothing came up. I even kept pressing the button for upto a minute to hard reboot it in case it was just a case of hanging but nothing came up.After that, I plugged it in for charging and attempted to boot again. After I kept pressing the power button for about 30 seconds while charging, the led blinked red 8 times, paused and repeated itself as long as I kept holding the power button.
The problem is that it even the screen doesn't turn on.
I searched for this issue and saw that many others were facing this issue. I tried the following solutions given by them which did not work:
1) Holding the power button for a long time
2) Keeping it for charging until it's full but nothing comes up and the phone got heated up very much untill I stopped it a few hours later.
3) Removing the back cover and detaching the battery power cable from the phone after after waiting for sometime, reattaching it.
My dad showed it to the lg repair centre but they told him they need to replace the whole board which is very expensive, especially considering that it is a 2+ year old phone. My dad is very angry at me and probably won't let me touch his phones ever again if I don't fix this. Please help me.
Thanks in Advance
Edit: the charge was at 45% when I switched it off. Don't think it is because of low battery
With the phone pluggged into your computer, does the computer recognize the phone? And if yes, what does Device Manager report it as being?
arvindr07 said:
I had rooted my dad's lg g2( D802) and installed twrp using an app named autorec as it was recommended by many people in the internet and had very high ratings and downloads in the play store. Everything was fine for a few weeks till I noticed that the app had an update. So I flashed twrp again from the app hoping it was a newer version and it said it completed the operation successfully. Then I just used the phone for sometime and after that I switched off the phone to enter the recovery. After it switched off, I pressed the button combination for entering the recovery but nothing came up. Then I attempted to just boot the phone and kept pressing the power button but nothing came up. I even kept pressing the button for upto a minute to hard reboot it in case it was just a case of hanging but nothing came up.After that, I plugged it in for charging and attempted to boot again. After I kept pressing the power button for about 30 seconds while charging, the led blinked red 8 times, paused and repeated itself as long as I kept holding the power button.
The problem is that it even the screen doesn't turn on.
I searched for this issue and saw that many others were facing this issue. I tried the following solutions given by them which did not work:
1) Holding the power button for a long time
2) Keeping it for charging until it's full but nothing comes up and the phone got heated up very much untill I stopped it a few hours later.
3) Removing the back cover and detaching the battery power cable from the phone after after waiting for sometime, reattaching it.
My dad showed it to the lg repair centre but they told him they need to replace the whole board which is very expensive, especially considering that it is a 2+ year old phone. My dad is very angry at me and probably won't let me touch his phones ever again if I don't fix this. Please help me.
Thanks in Advance
Edit: the charge was at 45% when I switched it off. Don't think it is because of low battery
Click to expand...
Click to collapse
more info... what variant? phone does not boot.. can you press vol up then plug phone .. does download mode works... stay calmed this can be fixed..:fingers-crossed:
I haven't tried plugging it to the computer. The way to enter download mode is holding the volume up button right? Thank you for the suggestion. I'm away for a few days but I'll tell my dad to do so. I'll post what happens then. Variant is D802
OK I told him to do that. When he pressed the volume up button and then plugged it to his computer, 13 new partitions showed up in windows, and it is telling him that he needs to format the positions to use it. But nothing is coming up on the phone
Do NOT let Windows format the partitions(!)
Use the SRKTool instead to unbrick from qhsusb_bulk mode:
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Afterwards use LG Flash Tool 2014 to flash the KDZ for your variant:
http://forum.xda-developers.com/showthread.php?t=2432476
It's better to let the battery charge to full first. Shut down the phone by holding PWR button for 10 seconds, then plug charger. It should work even in bulk mode.
Did you try these simple things...
shutdown phone keeping powerbutton down.
Start pressing power button & vol down....when you see LG logo for couple seconds. Release fingers and press vol UP and vol DOWN, same time. No power button.
MB525 said:
Do NOT let Windows format the partitions(!)
Use the SRKTool instead to unbrick from qhsusb_bulk mode:
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Afterwards use LG Flash Tool 2014 to flash the KDZ for your variant:
http://forum.xda-developers.com/showthread.php?t=2432476
It's better to let the battery charge to full first. Shut down the phone by holding PWR button for 10 seconds, then plug charger. It should work even in bulk mode.
Click to expand...
Click to collapse
But the problem is, even the screen doesn't turn on while on download mode. I'll surely try out the unbrick tool but will it work since normally, the download mode screen comes up. That thing is 760mb. I think it'll take some time for it to finish. (Ultra slow internet connection )
mal13 said:
Did you try these simple things...
shutdown phone keeping powerbutton down.
Start pressing power button & vol down....when you see LG logo for couple seconds. Release fingers and press vol UP and vol DOWN, same time. No power button.
Click to expand...
Click to collapse
The lg logo doesn't come up when I do that. If fact, even the screen does not turn on
Thank you guys! Srk tools worked! Again thank you very much
Related
So I've encountered the soft brick many times and been fine. Well now, after messing with Odin, the phone is off and won't come back on.
I've attempted turning it on with the power, power + vol up/down, plugged in, pulled the battery for a few mins and tried again, etc...
Is this a possible full on brick?
try doing it without pressing the power button
To expand a little on what chikin said
1. remove battery, sim and sd cards
2. plug in usb from phone to pc
3. holding only the volume buttons (up and down), pop the battery back in
This should launch you into dl mode. I remember last week someone was having the same issue, phone would not respong to anything and would not power on, and this method brought him to dl mode where he could use odin to flash to stock. If it doesn't work at first, keep trying, patience and persistence is the key.
Br1cK'd said:
To expand a little on what chikin said
1. remove battery, sim and sd cards
2. plug in usb from phone to pc
3. holding only the volume buttons (up and down), pop the battery back in
This should launch you into dl mode. I remember last week someone was having the same issue, phone would not respong to anything and would not power on, and this method brought him to dl mode where he could use odin to flash to stock. If it doesn't work at first, keep trying, patience and persistence is the key.
Click to expand...
Click to collapse
Oh wow, thank you so much! I was ready to drop this thing in the toilet and go make an insurance claim today.
Did you get 'er to boot?
Sent from my Br1cK'd_KA6 Vibrant via the XDA App
Damn, think I am on the same boat and it's slowing sinking. Just got my phone last night too and followed the video on how to flash the AXURA Vibrant edition rom and everything appeared to go smoothly and then after it was done I rebooted my phone and now I can't turn it on and even tried the pulled battery method mentioned here too.
How long does it take after you pop in the battery? A few seconds or a minute before something comes up on screen? Thanks.
So few days ago my phone suddenly turned off and kept rebotting itself (It would reach the samsung galaxy logo and then turn off). I thought it was a battery issue so I removed it for 30mins and tried again, worked fine for an hour then problem started again. I left it over night to charge in the wall socket incase.
Same issue next morning and no solution.
I replaced the battery with a friends and the same issue happened on my phone (i used my battery on his and it works fine on his) so I removed the issue of battery itself.
That evening the phone then just stopped responding at all. It would not respond to pressing the power button (no load, no vibration).
Tried entering download mode using vol down + home + power. Nothing. (So cant use Odin)
Tried entering recovery mode using vol up + power. Nothing
Tried hard reset using vol up + power + home. Nothing.
(All the steps I used a fully charged battery from another s4 phone and removed/re-entered before trying again)
So I check online and notice some people having issues with power button, but even if that is the case - wouldn't my phone still charge? I dont even get the battery chargning icon on the screen when plugged in either PC or wall socket.
I opened it up and changed the motherboard with another samsung s4 and my original problem mobo still does not load on the new s4. (My new mobo worked on the old device though).
The ONLY response I got was when I used my original mobo on new s4 device and plugged it into PC, it popped connect and then disconnect sound and thats it (doesnt recognize usb port).
What are my options apart from getting another motherboard or going to a shop for a JTAG repair? I was contemplating just removing the power button and seeing if that helps in getting a charge response lol
Well your power button is broken for sure. Replace it and then test it.
Lennyz1988 said:
Well your power button is broken for sure. Replace it and then test it.
Click to expand...
Click to collapse
Wouldn't the phone still recognize charging even if the power button is faulty?
penguness said:
Wouldn't the phone still recognize charging even if the power button is faulty?
Click to expand...
Click to collapse
It always takes a few seconds before it starts to charge. So maybe the device reboots before reaching the charging phase. I'm guessing though. But since your problems started with power button issues it would be the logic place to start.
The part only costs a few dollars.
Well I'm exactly in the same situation as you, since this morning on a i9505 running JFLTPE-GPE 5.0 ROM. The screen appears for 1 second or 2 (Samsung logo) then it powers off . I need to remove the battery to try something else.
Same behaviour, even for recovery mode, so Odin is not an option.
I thought that changing some kernel settings have caused that, but as I just put them back to default values, it should not happen.
I didn't have some power button issues, it was just powered off at my wake up this morning. In your case, does your phone vibrate and power up instantly when you put the battery ? That's the case for me, but it should not be the normal.
My problem is actually solved : indeed, it was the power button. I removed all the screws and played a little with this power button (air dust, etc...), enough to make it start correctly !
I managed to do some backups, and now I hope that it won't break again.
Calicodesiles said:
My problem is actually solved : indeed, it was the power button. I removed all the screws and played a little with this power button (air dust, etc...), enough to make it start correctly !
I managed to do some backups, and now I hope that it won't break again.
Click to expand...
Click to collapse
Yeah, that happened before (automatically powering up, vibrating, going to samsung logo and then shutting down and doing it again until I removed battery - putting the battery back in with start it up without pressing the power button).
When it was in that phase, the one thing that did work was doing a soft reset (home+power+down vol, and then holding just power) - however that only worked for like an hour before it went back to the restart phase.
However now it doesn't respond to anything at all. (Any kind of response I got was when I put that mobo in another s4 and plugged in usb, which just gave a connected/disconnect sound on w7, no life on the phone itself).
Be very careful as to what you do, I suggest you do NOT leave the battery on it and charge it (which was the last thing I did before it went unresponsive) - my guess is phone went haywire trying to turn on/off continously.
I have a at&t S4 that all of a sudden today stopped working. When I restart the phone by taking the battery out and putting back in, it gets stuck on the Samsung Galaxy S4 logo and then a black screen. I tried going to recovery mode(volume up + home + power button), and it shows recovery booting in blue for a sec then goes black. I tried for download mode the warning comes up but after pressing volume up it goes black. I really don't know what to do at this point.
Tried using kies or smart switch to perform a firmware recovery?
Yes, the computer doesn't recognize that the phone is connected. It's as if when the phone goes to the black screen its actually powered off. The only time I get anything from the phone is when I pull the battery and reinsert it.
bubba9004 said:
I have a at&t S4 that all of a sudden today stopped working. When I restart the phone by taking the battery out and putting back in, it gets stuck on the Samsung Galaxy S4 logo and then a black screen. I tried going to recovery mode(volume up + home + power button), and it shows recovery booting in blue for a sec then goes black. I tried for download mode the warning comes up but after pressing volume up it goes black. I really don't know what to do at this point.
Click to expand...
Click to collapse
When the phone battery are too low, the phone could behave like that too.
Do you know that battery is fully charged or has more than 60%?
If not charge the phone first.
Plug the charger. If you did not see any sign showing that you phone is charging, press and hold the power button for 10 sec and release it. You should see the phone charging image.
Let me know whether your phone has enough battery power left but showing the above mentioned problems.
sway8966 said:
When the phone battery are too low, the phone could behave like that too.
Do you know that battery is fully charged or has more than 60%?
If not charge the phone first.
Plug the charger. If you did not see any sign showing that you phone is charging, press and hold the power button for 10 sec and release it. You should see the phone charging image.
Let me know whether your phone has enough battery power left but showing the above mentioned problems.
Click to expand...
Click to collapse
Yes, the battery is fully charged. I have another S4 Active that I've swapped the batteries with, along with a spare official Samsung battery and charger. It doesn't matter which battery I use, the phone acts the same with any of the 3.
bubba9004 said:
Yes, the battery is fully charged. I have another S4 Active that I've swapped the batteries with, along with a spare official Samsung battery and charger. It doesn't matter which battery I use, the phone acts the same with any of the 3.
Click to expand...
Click to collapse
If you have enough battery power left but the phone was behaved like that, you might need to flash the firmware.
Are you in lollipop or kitkat? For the time being, the only firmware available for kit-kat and lollipop is NB1 firmware cooked by muniz_ri . You can get it from here.
You mentioned that you can go to download mode but the phone shut off when you press volume up to go to the download mode after the warning.
Try the 10 sec method. Go to the download mode (power+home+volume-down) but keep holding the power button for 10 sec even though you see the warning message appear. Then you press volume up to go the download mode. Try this way and let me know.
sway8966 said:
If you have enough battery power left but the phone was behaved like that, you might need to flash the firmware.
Are you in lollipop or kitkat? For the time being, the only firmware available for kit-kat and lollipop is NB1 firmware cooked by muniz_ri . You can get it from here.
You mentioned that you can go to download mode but the phone shut off when you press volume up to go to the download mode after the warning.
Try the 10 sec method. Go to the download mode (power+home+volume-down) but keep holding the power button for 10 sec even though you see the warning message appear. Then you press volume up to go the download mode. Try this way and let me know.
Click to expand...
Click to collapse
It was on Kitkat. I can press the volume up and get it to show the download android screen but it immediately shuts off. Holding the power button for 10 secs. and then the volume up didn't do anything. The phone shuts off after 1-2 secs. of doing anything.
bubba9004 said:
It was on Kitkat. I can press the volume up and get it to show the download android screen but it immediately shuts off. Holding the power button for 10 secs. and then the volume up didn't do anything. The phone shuts off after 1-2 secs. of doing anything.
Click to expand...
Click to collapse
That is strange. The same thing happened to me. But I avoided the phone shut down by 10 sec methods.
Just hold the power+home+volume down for 10 sec, even though the warning sign show up, and then let it go all of them. Plug the phone to the computer and then press the volume-down to go into download mode. It works for me. Not on the first try though.
Try doing that with batter charger plug in too.
sway8966 said:
That is strange. The same thing happened to me. But I avoided the phone shut down by 10 sec methods.
Just hold the power+home+volume down for 10 sec, even though the warning sign show up, and then let it go all of them. Plug the phone to the computer and then press the volume-down to go into download mode. It works for me. Not on the first try though.
Try doing that with batter charger plug in too.
Click to expand...
Click to collapse
Thanks for your help. I figured out whats wrong, its got a faulty power button. I took the phone apart, put it back together, and was able to get it to boot completely. The slightest touch of the power button causes it to reboot though, so I'm going to need to replace it.
bubba9004 said:
Thanks for your help. I figured out whats wrong, its got a faulty power button. I took the phone apart, put it back together, and was able to get it to boot completely. The slightest touch of the power button causes it to reboot though, so I'm going to need to replace it.
Click to expand...
Click to collapse
Glad you found the problem. I was trouble shooting for the software error.
Yes, power bottom could give you a problem too. I use screen off app so I do not have to use power button to turn off the screen.
I just encountered a very strange and worrisome issue today. I successfully rooted my OnePlus 6T and installed Magisk with TWRP following these instructions.
After reinstalling my apps, installing the AdAway apk, and rebooting (using the system dialog) after I was prompted to, my phone refuses to start.
The screen is all black with no signs of any activity. I tried holding the power button for 10+ seconds in various combinations with the volume buttons. None of them worked. The phone is definitely not battery dead because I clearly remember the phone was plugged into my computer and at 83% at the time it shut off. I hardly believe I bricked my phone because the rooting process was 100% successful.
Any help would be greatly appreciated.
Plugging in your phone have any signs of activity? Might be in qcom mode. Worked for me to hold power and volume Up for like 30 seconds.
I've had this issue a few times, I was always able to get it to turn on by holding vol up + power for an extended period of time.
mang0 said:
Plugging in your phone have any signs of activity? Might be in qcom mode. Worked for me to hold power and volume Up for like 30 seconds.
Click to expand...
Click to collapse
my op6 got bricked.....and when using MSM tool it shows ....."downloading op2.img failed" after an error "SHA256 not matching /or something like that" ! anyone help please !
I have a similar problem. I tried to convert my op6t to a an international phone. I held the volume up and down buttons, then plug it in to the computer. Nothing happened so I figured I would redo it. I tried to turn it on but nothing happens
I am sorry if this is a dumb thread I am just worried. I was watching my Poco M3 update up to 60%(my battery was on 68% before starting the update) then I started to watch TV and didn't pay much attention to the phone. When I looked at it it was off and i thought that maybe it is just in the process of rebooting or its already on the lock screen .Because I thought it may still be rebooting I just placed my finger on the fingerprint reader because I didn't want to risk turning it of by pressing the power button. My phone didn't respond at all. I haven't tried to hold the power button because I'm worried that its still in the process of updating. What should I do ?
Never mind. I had to hold the power button for 10 seconds and it turned on. I am sorry for wasting your time. I was so worried since it was a new phone and I couldn't afford a new one. I am sorry again.
This post was usefull, it happened to me too. The phone wouldn't even show an image when connected to a charger. I waited for a while, entered Fastboot succesfully and then, after the second (on the first one remained stuck on the MIUI screen) 10s power button push, it succesfully booted
It happened also to me during update to 12.0.8.0, but I used Power and Vol+ and then Reboot to System.
It was a moment of anxiety.
It happened to me to. It is a branch new phone and I got so worried that I might just have bricked it. Fk Xaomi.
just happended with me right its on MIUI Screen hope its get on
Update: Just Booted In Fastboot Its on Screen now
Same thing just happened to me too. My phone is not turning on at all. I tried holding the power button for 10 seconds as discussed here, tried fast booting, tried connecting charger and starting. Nothing is working. Going into panic mode.
**UPDATE***
After leaving the phone alone for 24 hours in which time it was completely unresponsive to anything I tried, I connected the charger and just pressed power button and it decided to just start normally. POCO needs to address this situation.
**UPDATE***
Phone is not responding again after restrating. I give up on this phone.