Database Users

Cannot uninstall HSPL after installing 1.66 wwe rom

My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.

mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.

thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 00028002 NOT ALLOW something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
tictac0566 said:
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.
Click to expand...
Click to collapse

don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?

mon_money said:
thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 02800 something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
Click to expand...
Click to collapse
Actually, you did everything correctly... except that you should use the stock ROM for your device, which is vodafone branded, isn´t it?
BTW, did you check the SPL version already? Because it might be already back to stock SPL, but then, you won´t be able to flash an original HTC ROM.
Being back at stock SPL (with vodafone CID) and trying to flash/launch an official HTC ROM on the branded device results in what you write!

Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
EddyOS said:
don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?
Click to expand...
Click to collapse

mon_money said:
Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
Click to expand...
Click to collapse
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.

BIG thank you .. it is working now with the stock 1.43 rom.. and yes u are right.. it was showing me again 1.42 spl after uninstalling the HSPL.
u saved my hd2.. thx once again for ur great help..
tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse

tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse
Hi
Thanks for the link, however the 1.43 ROM is corrupt, I have tried downloading several times. I try to extra the RUU_Signed.nbh with winrar but it fails, the 1.66 and 1.72 Vodafone ROMs extract fine.
Basically I am trying to restore a Vodafone HD2 to stock ROM+SPL, reason being the phone they sent on an insurance replacement is rubbish e.g. the touchscreen isn't responsive. I tried changing to a custom ROM also Vodafone 1.66 and 1.72 to see if the problem would be fixed but it didn't help.
Now I just need to send the phone back for another replacement.
Does anyone have an alternative link for this 1.43 ROM?

I am having a similar issue.
I am trying remove HSPL, I have copied the .nbh file over to the SD already formatted as FAT 32 - I'm using my original ROM.
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
When I start with volume down pressed, I get a message saying " Upgrade ROM code error please try again " then the multi coloured screen with SPL-1.42.0000 XE.
Please help, I fear I have broken my phone ...

chrisukhd2 said:
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
Click to expand...
Click to collapse
Then your phone is probably provider rom locked.
SPL-1.42.0000 XE.
Click to expand...
Click to collapse
HSPL is already removed, which is why the WWE roms don't work. You need to find your provider released rom, or (far easier) run hspl2, choose 1.42.hspl, flash either of teh roms you mentioned above by USB, run hspl2 again, choose 1.42.0000 and done.

samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?

chrisukhd2 said:
samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?
Click to expand...
Click to collapse
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2

ClydeB1 said:
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2
Click to expand...
Click to collapse
pre - and indeed - cisely

OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
I even tried with HSPL I had before and the same result.
Argghhhhhh
What can I be doing wrong here ?

Working now
I downloaded the latest O2 ROM 1.72.0 etc and it's working now.
Thanks again guys, you helped me a lot
Once more thing my phone now say's it has SPL-1.66 - I guess when unlocking using HSPL2, I now need to choose 1.66.000?

mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
1. download stock ROM
2. unpack/unzip and place ruu_signed.nbh and ROMUpdateUtility in sd card
3. make sure you have >50% battery life
4. with the device turned off, put sd card in
5. enter boot loader, device will automatically detect ROM file in sd card and
then will install this, it will install stock spl as well so hspl will be removed

chrisukhd2 said:
OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
Click to expand...
Click to collapse
sounds like you tried to flash over sd card, which as any fule kno first thing it does is resets the spl, so hspl is no longer installed so the rest of the flash fails.
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
Click to expand...
Click to collapse
because its .0000
I even tried with HSPL I had before and the same result.
Argghhhhhh
Click to expand...
Click to collapse
used sd card again eh?
1 - boot the phone to bootloader. (Three coloured screen)
2 - run hspl2, choose whatever spl you like SO LONG AS it ends HSPL.
3 - when the phone reboots, keep volume down pressed to re enter bootloader
4 - run your rom flash over USB
5 - phone should now boot normally.
6 - if you now want to remove hspl again, re run HSPL2 and choose the spl you want, ENDING IN .0000

samsamuel
Yes Doh - I was flashing from SD and then trying to flash through USB. It all makes sense now. I got around it though by using the new O2 ROM that's just been released so I didn't need to unlock to bring my phone back to life.
Anyway it's all working fine now with the stock 1.72 O2 ROM, just flashed with HSPL2 and re-installed the Energy ROM.
Thanks again for all the help.

ahh good.
Its a good idea if you flash fairly regularly to do your flashing from bootloader, that way you are visually aware of your spl at every step. just get used to holding vol down as it reboots and you can do the whole thing, hspl, rom, radio, without ever having to pull the battery. just keep booting to tri colour till its done.

htc hd2 dead after flash

hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem

friendjabi said:
hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem
Click to expand...
Click to collapse
you will brick your T-Mobile HD2 with this ROM. this is not a compatible ROM for the T-Mobile HD2.
see if this will help you
http://forum.xda-developers.com/showthread.php?t=668347

friendjabi said:
hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem
Click to expand...
Click to collapse
that radio has killed it. You cant get into bootloader, so the above wont help.
Unlucky.

samsamuel said:
that radio has killed it. You cant get into bootloader, so the above wont help.
Unlucky.
Click to expand...
Click to collapse
It's not that its about luck is about reading which ROM is compatible.
Sorry about your brick.
Kenichi

Thats why its always important to read the stickies and the 'for noobs' postings before flashing. They stress it so many times but yet there's always someone who just doesnt read. Or if they do read they dont understand and flash anyway.
Preaching wont help you any now.
Try contacting HTC and see what they say.

Kenchi* said:
It's not that its about luck is about reading which ROM is compatible.
Kenichi
Click to expand...
Click to collapse
words to live by

Lets cut this guy a small break... based on his relatively poor spelling and grammar i don't think he can even read English. It's amazing how he got it to flash in the first place.....

That was a funny one

no have to do with read english i dont not english and i flash everything and i have android on my hd2

I had the same thing happen to me. I downloaded hspl but didnt notice that there was a difference between the leo and tmousa roms. Anyway i installed a rom and it bricked my phone. I have HSPL 2.08 installed. Does this mean i can just retry a different tmousa rom (by sd card or usb??) and im ok?
Or am i screwed too and have to go to a early version?

icexclusive said:
I had the same thing happen to me. I downloaded hspl but didnt notice that there was a difference between the leo and tmousa roms. Anyway i installed a rom and it bricked my phone. I have HSPL 2.08 installed. Does this mean i can just retry a different tmousa rom (by sd card or usb??) and im ok?
Or am i screwed too and have to go to a early version?
Click to expand...
Click to collapse
if you just flashed a rom, you are fine. Boot into bootloader, and flash a compatible rom. Its only radios that kill the tmous, and most custom roms dont include a radio. Its mainly the non tmous official roms you need to avoid.

so basically thats what ive been doing. i put a nbh file into a sd card and load bootloader. It doesnt seem to do anything. I found on you tube that i have to rename the file to leoimg.nbh?
do i have to do this or do i just throw a compatible nbh file and it should autoload in bootloader. Also is there a way to install 2.13.xxx the lastest tmobile stock rom from bootloader? All the ones i have been able to find are in .exe format and want me to have my device be active synced. I tried putting those on a sd card and flashing like that but i didnt do anything.

the funny thing was i really did try to flash a radio from a leo at first but it did not work after 5 attempts. Then the chucky rom finally did the trick.
Now i cant seem to flash from sd card. I dont think i know the process.

no need to flash from sd card, just go into bootloader, plug in teh usb, wait for 'serial' to become 'usb', run customruu on teh pc.
Whilst in bootloader,. check what it says next to 'spl', the number there should end '.hspl' and not '.0000'

damn im trying to install the nibbey rom but it doesnt work. I got it to go to 7% max one time and now its always 0% when i retry. I put the leo_customruu in the same folder as the nibbey nbh. and then start the customruu! is this the correct procedure?

samsamuel said:
no need to flash from sd card, just go into bootloader, plug in teh usb, wait for 'serial' to become 'usb', run customruu on teh pc.
Whilst in bootloader,. check what it says next to 'spl', the number there should end '.hspl' and not '.0000'
Click to expand...
Click to collapse
Yes it says hspl not 0000. Also i think my batter is below 50 percent now with no way to charge it. im starting to be believe that might be the reason it stopped at 7 percent and now the more i retry i get 0%.
also i am not able to get a active sync connection anymore with my device stuck in hspl bootloader. So the whole usb rom flash fails every time. Someone help i need my phone tomorrow.

i got it fixed! turns out i needed a 2gb sd card and it worked perfectly to install a custom rom.

I will buy your brick from you dude.

Bricked HD2 Leo

Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!

prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?

Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device

prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.

Can you explain me? Please step by step... Thanks in advance

prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...

prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!

If you can't pay rent, I'm afraid I'll have to ask you vacate the area.

Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D

I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)

prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..

spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device

original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash

i have shipped original rom, still no luck

not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you

Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.

stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,

Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?

Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !

Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.

[Q] Help Stuck At Bootloader!!!

So I was installing a stock rom on my device so I could return it to tmobile, but i think i may have installed the wrong type of rom. Its showing I have spl-3.03.0000 XE, and it gives me this error that states "upgrade ROM code error Please Try Again" and when I try another stock rom it gives me an error that states "wrong vendor ID" is there any way to fix this and install a stock rom once again?

The ROM you flashed, where did you download it from? If it was not from the T–Mobile website I suvvest you go download the official upgrade ROM from there, when it ask for hour IMEI number you can vet it from under battery.

T-Macgnolia said:
The ROM you flashed, where did you download it from? If it was not from the T–Mobile website I suvvest you go download the official upgrade ROM from there, when it ask for hour IMEI number you can vet it from under battery.
Click to expand...
Click to collapse
Tried installing the update off of tmobile the installation stays stuck at zero percent and the installation times out. Thanks though! Is there anything else i could do? Any help is much appreciated!!

For the sake of testing... Put hardSPL and try a custom rom to see if it boots
Sent from my HD2 using XDA Windows Phone 7 App

edwards33 said:
Tried installing the update off of tmobile the installation stays stuck at zero percent and the installation times out. Thanks though! Is there anything else i could do? Any help is much appreciated!!
Click to expand...
Click to collapse
Ok from the title of your thread here I am assuming you are puttng you HD2 into bootloader, waiting for USB in the white bar of bootloader and then flash the ROM? If you are doing this try right clicking on the RUU and select run as administrator. If that does not work try flashing it via SD card. Go to this thread to learn how to flash via SD card.

Its showing I have spl-3.03.0000 XE, and it gives me this error that states "upgrade ROM code error Please Try Again" and when I try another stock rom it gives me an error that states "wrong vendor ID" is there any way to fix this and install a stock rom once again?
Click to expand...
Click to collapse
This happens when you have hspl installed and then flash a 3.14 stock rom over sd card.
Hspl gets removed, replaced by 3.03.0000, the flash tries to continue but cant.
The first and biggest question is..... you say it's from t mobile., but what colour are the send and end keys? White? Or red and green? Since to get the error you get implies an incorrect stock rom, and incorrect stock roms kill tmous phones.please also include the complete filename of the stock roms you have tried, especially the first one that gave rom code error.

Try creating a gold card. It will force you through to flashing off the SD card. I also can JTAG this and resolve the problem for you as long as there is not physical nand-failure.

T-Macgnolia said:
Ok from the title of your thread here I am assuming you are puttng you HD2 into bootloader, waiting for USB in the white bar of bootloader and then flash the ROM? If you are doing this try right clicking on the RUU and select run as administrator. If that does not work try flashing it via SD card. Go to this thread to learn how to flash via SD card.
Click to expand...
Click to collapse
OK Tried running the tmobile official update throught the sdcard as well still no luck It just says loading and nothin happens after that.
Also tried installing HSPL but says it can not be flashed
samsamuel said:
The first and biggest question is..... you say it's from t mobile., but what colour are the send and end keys? White? Or red and green? Since to get the error you get implies an incorrect stock rom, and incorrect stock roms kill tmous phones.please also include the complete filename of the stock roms you have tried, especially the first one that gave rom code error.
Click to expand...
Click to collapse
the send and end keys are green and red.... the stock rom that gave me the error is ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship
Also have tried Installing The tmobile update directly from tmobile.com T-Mobile_HD2_MR_Software_3.14.531.1

OK I was able to get the phone to boot up by using a test rom but it still will not load up a stock rom it won't work through ruu or from sd card the spl also changed to 2.00.100 XE is there anything else i can try? thanx for the help!

Ahh see now that's a shame.
you do have a tmous, but the rom tmo_de IS NOT for your phone.
That's about as close to bricking your phone as you can get without actually bricking it.
that rom is tmo Germany, which means it is for the regular hd2. The ONLY stock roms your phone will accept are tmous stock roms. All other t mo roms from around the world are for regular hd2.
And now you made it worse by flashing a test rom with an spl which is a pain to get rid of.
In the test and stock roms thread where you found that test rom, DO NOT flash the first rom in the list, it will kill your phone.look at the end of the list and there is a version of hspl edited to work with spl 2.00
Give that a try first.
You aren't the first so Google stuck on spl 2.00.1000 and start reading.
DO NOT FLASH ANYTHING TILL YOU ARE 100% SURE OF THE EXPECTED OUTCOME.
You got real lucky, there are countless threads here that go "tmous,non tmous stock rom, phone now utterly dead",,, don't ruin it now by going flash crazy.

edwards33 said:
OK I was able to get the phone to boot up by using a test rom but it still will not load up a stock rom it won't work through ruu or from sd card the spl also changed to 2.00.100 XE is there anything else i can try? thanx for the help!
Click to expand...
Click to collapse
You need to go to the "Leo 1.5 T-Mobile Test & Stock ROMs" thread anf use the link at the bottom of post one named " HSPL with MFG SPL 2.00 support!". This is suppose to support the SPL version you have and allow you to flash HSPL to your HD2 wich should allow you to flash the official T-Mobile ROM or any custom ROM you want to flash. Good luck
Edit: You beat me to the punch Sam
Also the first stock ROM must have changed your SPL and that must have been why you could not flash the official T-Mobile ROM. Like Sam said you got very lucky, if that first stock ROM would have flashed hou would have had a bricked HD2.

OK well tried using the hspl3 but still get the error saying bad spl so I'm gunna start reading up and hope there's a way to get the stock rom back on the phone. Thanks everyone for all your help its greatly appreciated!!
Sent from my LG-G2X using XDA Premium App

You do mean the specially adapted hspl from the teststock roms thread right? Not just normal hspl3?
If so, next step should probably be goldcard.

samsamuel said:
You do mean the specially adapted hspl from the teststock roms thread right? Not just normal hspl3?
If so, next step should probably be goldcard.
Click to expand...
Click to collapse
Yea it was the one from the stock rom thread I'll read up and learn to use gold card thanks
Sent from my LG-G2X using XDA Premium App

[Q] HTC HD2 SPL Version

Alright,
Today my touchscreen stoped working. I was running android and the phone has the HSPL 2.08 version installed.
After one day trying to get it to work, i managed to flash the 6.5 win mo back. After that i thought the HSPL was gone, well you guessed already, it didn't. So i used the HSPL 4 installation tool, selected spl 2.08 and booted right into boot loader to see if it worked. And well yes it worked but here comes the question.
Now there are 4 sentences:
The first with a serial code starting with PB and ending with -BC
Second it states SPL-2.08.0000 8g XE
Third MicroP(LED) 0x05
At last: MicroP(TOUCH) 0x30
My phone is from the beginning of 2010 i want to send it to htc to let the screen be replaced, my question is: is the SPL version the right version and will there be no ugly questions from HTC if i was running android / had HSPL installed?
Already thanks!

That spl 2.x is only correct if you have a tmous.
Assuming you don't have a tmous, You should either flash the rom again but from sd, or use HSPL2 or HSPL4 to match the spl to the rom.
If you Do have a tmous, that's fine.

Prom1se said:
Alright,
Today my touchscreen stoped working. I was running android and the phone has the HSPL 2.08 version installed.
After one day trying to get it to work, i managed to flash the 6.5 win mo back. After that i thought the HSPL was gone, well you guessed already, it didn't. So i used the HSPL 4 installation tool, selected spl 2.08 and booted right into boot loader to see if it worked. And well yes it worked but here comes the question.
Now there are 4 sentences:
The first with a serial code starting with PB and ending with -BC
Second it states SPL-2.08.0000 8g XE
Third MicroP(LED) 0x05
At last: MicroP(TOUCH) 0x30
My phone is from the beginning of 2010 i want to send it to htc to let the screen be replaced, my question is: is the SPL version the right version and will there be no ugly questions from HTC if i was running android / had HSPL installed?
Already thanks!
Click to expand...
Click to collapse
It looks right to me.
The surest way to do this though is to find your stock ROM via HTC Support (international) or tmobile support (TMOUS), they will have you enter your IMEI/SN and so will ensure you get the correct stock ROM from your phone.
You have to flash via SD, RUU will not replace your SPL, but SD will replace your SPL and everything else to ensure it is on the correct stock everything.

Thanks for the reply's,
Dont got a tmous. So if im correct i need to place the the file in the .exe file from the htc support site (witch i downloaded the latest rom) named: RUU_signed.nbh toe leoimg.nbh and put in on my sd card, next i need to go into boot loader and it will do all the work?
I found a video what describes stated above: http://www.youtube.com/user/inmatrixout#p/u/6/N5gYQ3A7KqA
Thanks!

Alright,
Just put the nbh file to my sd card and renamed it to leoimg.nbh then booted into the bootloader and the 3 colord screen pops up. Next screen flashes to white with blue letters saying: loading...
Stil is there after 2 mins, in other words.. freezed.. what sould i do?
Already thanks!
Greets
Prom1se

Prom1se said:
Alright,
Just put the nbh file to my sd card and renamed it to leoimg.nbh then booted into the bootloader and the 3 colord screen pops up. Next screen flashes to white with blue letters saying: loading...
Stil is there after 2 mins, in other words.. freezed.. what sould i do?
Already thanks!
Greets
Prom1se
Click to expand...
Click to collapse
what size sd card are you using ?
If you have 2gb it will be fine just be sure to format with "fat32".
Make sure sd card work well.
Make sure your battery isnt under 50%.
And finally make sure you downloaded right rom.
thats all, try that and report back , i hope you succeed .

ubejd said:
what size sd card are you using ?
If you have 2gb it will be fine just be sure to format with "fat32".
Make sure sd card work well.
Make sure your battery isnt under 50%.
And finally make sure you downloaded right rom.
thats all, try that and report back , i hope you succeed .
Click to expand...
Click to collapse
Reporting back..
I have a 8 gb card, witch i formated to fat32, i dunnow if i got the right rom, well i got this rom: klik from the xda page klik
But i downloaded another rom from the htc site, i didnt flash it with that one, but i did with the one i provided by link.
Already thanks!
Greetz prom
Oh, and by the way, it seems that the rom i downloaded from the htc site is simalar to one i downloaded and flashed provided by me in the link above.
-- Update:
- After watching the video i provided earlier and examine it closly i saw that the hspl version (1.42) was changed to spl 1.42. I know i did install hspl 2.08 with hspl 4 and did uninstall hspl with hspl 4 just by selecting the option spl 2.08 (or something like that.) Next poped up a alert box witch told me it was done.
So im asuming its good to go for servicing..? What you guy's think?

Prom1se said:
Reporting back..
I have a 8 gb card, witch i formated to fat32, i dunnow if i got the right rom, well i got this rom: klik from the xda page klik
But i downloaded another rom from the htc site, i didnt flash it with that one, but i did with the one i provided by link.
Already thanks!
Greetz prom
Oh, and by the way, it seems that the rom i downloaded from the htc site is simalar to one i downloaded and flashed provided by me in the link above.
Click to expand...
Click to collapse
ok... if still that doesnt work try 2gb sd card and make sure you download rom from htc web site with your phone serial number, because if you have wrong rom you may brick your phone.

if it successfully flashed from SD and you do not have HSPL anymore then you are good to go.

orangekid said:
if it successfully flashed from SD and you do not have HSPL anymore then you are good to go.
Click to expand...
Click to collapse
Well thats what i wanted to tel you is if you look at the picture youll see a red line, in my case there is standing SPL-2.08.0000 8G XE, the other information is indentical to mine. So, i think i got HSPL Uninstalled, what do you think?
Thanks!

Yes, you no longer have HSPL on there, which is good.

But if I understand you, it now says 2.08 which is not ok for regular hd2. Yes it works, yes it's stock, but spl 2. ONLY ships with tmous roms, therefore any regular hd2 found with spl 2 can only have gotten in that position using hspl or Goldcard,,, both warranty voiding practices.
For reg leo, you need 1.42.0000. 1.66.0000 or 3.03.0000

Alright, the 1.66 sounds familiar. But my usb port is olmost broken. What to do what to do.. :S
from the menu i only could choos 3.03.00 so flashed it, dft we hacked it come on front but it doesnt matter... now there is this information about the spl:
SPL-3.03.0000 XE
Hope that this is the good one???
Alright, another update...
- thought to myself, 3.03 well if this is the one, the leoimg.nbh should work.. And guess what.. its updating from the leoimg.nbh witch was extracted from the exe file, witch i downloaded with my serial number.. i think im good to go
- last update
-- update complte
-- UPDATE SUCCESS
Sounds clear to me, in boot loader no hspl or something like that.. thanks for the help guy's!!
Cheers to yall!

My advice is to go to the HTC Website and download the ROM for your phone (you need to put the phone's serial number to get the ROM). Since you are returning it for repair, then it doesn't matter what version of the ROM you use as long as it is a valid one for your phone.
Take the downloaded .exe file and rename it to .zip. extract the .nbh file and rename it to LEOIMG.nbh. place it in the root of a FAT32 formatted microSD Card (less than 8GB in size).
Boot the phone into Bootloader mode and the ROM will flash - if you follow the instructions.
These stock ROMs (and the mobile phone company branded ROMs) contain the main ROM, the RADIO ROM and the SPL. and by using the SD Card method ensures that everything is flashed.

fred_up said:
My advice is to go to the HTC Website and download the ROM for your phone (you need to put the phone's serial number to get the ROM). Since you are returning it for repair, then it doesn't matter what version of the ROM you use as long as it is a valid one for your phone.
Take the downloaded .exe file and rename it to .zip. extract the .nbh file and rename it to LEOIMG.nbh. place it in the root of a FAT32 formatted microSD Card (less than 8GB in size).
Boot the phone into Bootloader mode and the ROM will flash - if you follow the instructions.
These stock ROMs (and the mobile phone company branded ROMs) contain the main ROM, the RADIO ROM and the SPL. and by using the SD Card method ensures that everything is flashed.
Click to expand...
Click to collapse
Thanks for the info, why i couldn't flash it..? I think because it was expecting a tmous rom, (2.08 spl) just redid it with hspl 4 dont ask me how i managed to do it with a broken usb port on the phone.. :S. Well i managed and did accomplish it. Rom 3.03 is on it now. Tomorrow im going to the htc store for servicing.
Thanks to all!
Greets prom!

I assume that you meant a 3.14 ROM with a 3.03.0000 SPL.

fred_up said:
I assume that you meant a 3.14 ROM with a 3.03.0000 SPL.
Click to expand...
Click to collapse
This one to be exact
RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe

How to downgrade hspl 2 from hspl 4
i flash the new official rom which is hspl 3 so i cant put any more android back to my phone ....does any one have any idea ...please need help .....

Run hspl and choose 2.08.hspl
Not difficult