I'm having very low volume even at max when listening to music with headphones. Are you experiencing the same?
I haven't had this issue.
what music app are you using? try the stock app with SRS WOWHD in equalizer.
simplistian said:
what music app are you using? try the stock app with SRS WOWHD in equalizer.
Click to expand...
Click to collapse
is the stock app called "Music"?
i couldnt find a setting with equalizer.. in fact i couldnt find any settings in this app..
iamelton said:
is the stock app called "Music"?
i couldnt find a setting with equalizer.. in fact i couldnt find any settings in this app..
Click to expand...
Click to collapse
try to play a song first, then hit the menu button, you won't see the settings in playlists.
simplistian said:
try to play a song first, then hit the menu button, you won't see the settings in playlists.
Click to expand...
Click to collapse
got it.. thx!
iamelton said:
got it.. thx!
Click to expand...
Click to collapse
No luck for me. I have installed the Honeycomb Music app and removed the Froyo app. This one doesn't have much at all in settings. Anyone else?
Also my loud speaker and phone speaker are simply not loud enough. Any noise at all nearby and I cannot hear the caller talking. Do you think there will be fixes for this?
GolfCranK said:
No luck for me. I have installed the Honeycomb Music app and removed the Froyo app. This one doesn't have much at all in settings. Anyone else?
Also my loud speaker and phone speaker are simply not loud enough. Any noise at all nearby and I cannot hear the caller talking. Do you think there will be fixes for this?
Click to expand...
Click to collapse
I suggest to get the stock Music app back, your will be surprised by the SRS WOWHD equalizer with a good earplug
Try experimenting with the values in /system/etc/hwVolumeFactor.cfg. I haven't tried modifying this as I don't have an issue but I'm sure it's what you're looking for. It only has values for wired headset and speaker though, so whether speaker is both earpiece and loudspeaker or just loudspeaker I don't know. Give it a go and post your results.
@stockwell
You are right.
You have to increase the value "wired_headset". I changed mine from 60 to 70 and now it works prefectly with my on-ear headset. A bit too loud at max though.
If you need assistance feel free to ask ;-)
@AliWam- Please give instructions. Will be appreciated.
Hi !
Do i need to root my phone to change the value to 65 or above?
I cant save the changes because the mapp is write protected
Hey,
I'm sorry for the late reply, quite busy these days.
I take no responsibility for any harm that comes to your phone as a result of applying this mod.
1. You need a rooted device (e.g. z4root), Busybox[1] installed and a text editor (e.g. Text Editor from Market).
2. Open /system/etc/hwVolumeFactor.cfg in the text editor, replace the value(s) as you like and save it as a new file e.g. /mnt/sdcard/myVol.cfg. The file might look like this:
Code:
speaker=80
wired_headset=70
3. Remount the related partition writeable:
Code:
mount -o remount,rw /dev/block/mmcblk0p12 /system
4. Copy your new file and replace the old system file:
Code:
cp /mnt/sdcard/myVol.cfg /system/etc/hwVolumeFactor.cfg
5. Reboot your phone and then the new values should be applied.
------
[1]I'm not sure if you really need Busybox installed for these steps.
no sdk
To change the volume without the SDK (not use console command).
- install on your computer AndroidCommander
- in the phone menu choose the "applications / developer / debugging usb"
- connect phone to a PC
- run AndroidCommander on your computer.
- find / system / etc / hwVolumeFactor.cfg in AndroidCommander (right panel is a telephone system files)
- copy the file "VolumeFactor.cfg" to your computer and change values
- in the left window AndroidCommander find the edited file and move (copy) to "/ system / etc / hwVolumeFactor.cfg" on the window phone.
- disconnect the phone and restart
In this way you can change other files, but be careful .
Guys, i try all this even tho my phone is rooted when i paste my new file says its read only and when i try at android commander it says not rooted even tho it is i checked with root checker !!
any ideas ?
ektorgre said:
Guys, i try all this even tho my phone is rooted when i paste my new file says its read only and when i try at android commander it says not rooted even tho it is i checked with root checker !!
any ideas ?
Click to expand...
Click to collapse
I had no success changing the values in the file / system / etc / hwVolumeFactor.cfg using "es explorer" so upon advice in another thread I bought Root Explorer in the Market and it works. Once you are in the etc folder press the Mount R/W button and then you can edit the .cfg file by longpressing on it. It will auto create a backup. I increased my values to 99 and 70.
I also found from a poster here that the stock music player has an equalizer that you only see once you select a track to play. The default setting is very quiet but the SRS WOWHD is much better. Happy listening
Sorry for my silliness in advance guys. I can't make Android Commander work. It says "device not found". Have any ideas on what I'm doing wrong?
Alexcxvtr said:
Sorry for my silliness in advance guys. I can't make Android Commander work. It says "device not found". Have any ideas on what I'm doing wrong?
Click to expand...
Click to collapse
Make sure you have debugging enabled on the phone:
Go to settings > applications > development
Then enable USB debugging.
Poulsen8r said:
Make sure you have debugging enabled on the phone:
Go to settings > applications > development
Then enable USB debugging.
Click to expand...
Click to collapse
Thanks for the quick response. I do have usb debugging enabled. I can't figure out what I'm doing wrong whatsoever. Any other ideas?
Computer:
Is the SDK installed and did you set your path variables?
Have you installed the ADB driver for the phone?
Phone:
Do you have busybox?
Root?
Hi All,
The OP2 has a very low speaker volumes. Can someone mod this or help in editing the required files for increasing the volume of the speaker?
Attached is the stock mixer_path.xml
Even I tried many times to mod mixer_path but no luck..
Hope will get succeed very soon...
Maybe this works: http://forum.xda-developers.com/showpost.php?p=54546620&postcount=2
Already tried this.. Increased the volume to 92..but still no luck..even I tried editing the mixer_paths_i2s.xml but the volume still remains the same..
Saw a dual thread speaker thread, but I'll build was missing. Anyone figure out the adjustments needed? Have gotten exposed, lp working, audio mode by Devine beats 7.0 with the dd+ add on to work. Have to have se Linux changer to enable permissive. Anyone who hasn't gotten to work, noticed in flashfire when you run zip if you unchecked mount read/write in last option it won't stick. But with it enabled to mount system read/write sticks and no problems. Black player music aPk on same thread works also. Just noto eq engine. Marshmallow SD fix in exposed will fix write access to SD card.
Regarding the sound mod by @sshafranko hope someone knows what needs to be changed.
I have the mixer paths file that was for the note 5 but it didn't work on our s7edge.
Casetheace said:
Have to have se Linux changer to enable permissive.
Click to expand...
Click to collapse
How do you do this?
GermanGuy said:
How do you do this?
Click to expand...
Click to collapse
Here's the link for SEC Linux mode changer 3.2, Just install it and make sure give it root access when SU asks. There is a block to check to enable notification on mode change. I would check that off. Then you will see permissive and enforcing. You want to have permissive grayed out and enforcing in bold black. Which is done by pressing permissive, you will then see a notification that the kernel is now permissive. I've been checking multiple sound modes out. I would try Extreme beats 7.5.9 by android experts. It's in Android software thread. Also there is a add on for dolby digital. Flash Extreme beats followed by SD if your want to install that also. After boot you will have the extreme beats app looks like beats audio app and viper4android. Sound mood is unreal by far best of any out there tried them all. I'm a flash adrive. If you need more help let me know
Casetheace said:
Here's the link for SEC Linux mode changer 3.2, Just install it and make sure give it root access when SU asks. There is a block to check to enable notification on mode change. I would check that off. Then you will see permissive and enforcing. You want to have permissive grayed out and enforcing in bold black. Which is done by pressing permissive, you will then see a notification that the kernel is now permissive. I've been checking multiple sound modes out. I would try Extreme beats 7.5.9 by android experts. It's in Android software thread. Also there is a add on for dolby digital. Flash Extreme beats followed by SD if your want to install that also. After boot you will have the extreme beats app looks like beats audio app and viper4android. Sound mood is unreal by far best of any out there tried them all. I'm a flash adrive. If you need more help let me know
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/dl/?id=12506
Sorry forgot to add link for SEC Linux mode changer. Lol
I have tried several roms. AEX woivod 8.1, crdroid difr 8.1, frankenROM 8.1 etc. The in-call volume is very very loud in headset and headphones. Increased the steps but that didnt bring down the minimal volume which is way too high. I tried jasper custom kernal and decreased the headphone gain in sound but that brought down the media gain and the ringing gain levels. It does not get solved by clean flash or even after full internal storage wipe. This is present throughout all custom roms I think. Someone suggested editing mixer_* files in /system/vendor/etc. There are too many of these files and I dont know which values to edit to lower in-call volume.
SOMEONE PLEASE HELP!!!!!:crying::crying::crying::crying::crying::crying:
Someone please help!!!!! I did a recovery to my original miui backup but the problem is still there. I dont mind losing data. Im willing to do any type of clean install to solve this. I just want this bug to go away. Should I change the firmware?
What should I do?
PLEASE HELP!!!
ShadeOfLight said:
Someone please help!!!!! I did a recovery to my original miui backup but the problem is still there. I dont mind losing data. Im willing to do any type of clean install to solve this. I just want this bug to go away. Should I change the firmware?
What should I do?
PLEASE HELP!!!
Click to expand...
Click to collapse
Facing this problem too. I've tried patch as well as editing values in vendor. None seems to work.
So i just have to avoid talking on headphones as of now.
aman_bindal_ said:
Facing this problem too. I've tried patch as well as editing values in vendor. None seems to work.
So i just have to avoid talking on headphones as of now.
Click to expand...
Click to collapse
Have you tried stable Nougat ROMS? I would like to know if the problem is there in nougat or not. Is there no other way to solve this?
try out difr's patch and see if it works (its for 8.1 oreo ROMs)
mixer_paths.xml.zip
krishna_jm said:
try out difr's patch and see if it works (its for 8.1 oreo ROMs)
mixer_paths.xml.zip
Click to expand...
Click to collapse
I tried it bro..... No use....I even tried it on his crdroid build... Thank you so much for responding.
Hey ShadeOfLight,
I have the same problem with too high headset in-call-volume in havoc rom.
Thats pretty annoying...
But I found a solution for the problem that worked for me:
You need tasker and Kernel Auditor for this.
In Kernel Auditor you create two profiles: One with low volume in sound option for calls (I choose value -8) and one with normal volume (value 0) for music.
Now save them under different names. I named them "low volume" and "normal volume".
In Tasker you create two tasks with the Kernel Auditor plugin:
1. "low volume"-Kernel Auditor profile
2. wait (10s) -> "normal volume"
Now go to "profiles" in tasker and create a new profile with the state "Call" (choose any) under phone states.
Define "low volume"-task for the new profil and the "normal volume"-task as exit-task.
This worked for me. During calls I can use my headset again and can listen to music normally.
Maybe this will work for you too.
Best regards
Hello! Is it possible at J5 (2017) to permanently turn off the sound of the camera?
I tried many ways and applications - nothing helped. Stock firmware.
I know that can just remove the system sound, but this is a bad option. Maybe there are other solutions?
Solved a problem. In the others.xml file pasted the line:
Code:
<CscFeature_Camera_ShutterSoundMenu>TRUE</CscFeature_Camera_ShutterSoundMenu>
Now you can mute the camera.