Related
I'm making this thread here because I can't see anything being done to remedy this problem.
I have tried more than 5 roms that I have used in the past in SD era with MAGLDR 1.12 in the option "AD SD" and none worked. This SHOULD be easy, but it's not.
I have tried to change kernels for the new ones, thinking this would be the right way to do so, since the old ones expected haret and windows to work. This didn't work too.
To name a few...
NexusHD2-FRG83D V1.8 from Tytung (the best in the old days for a clean froyo, IMHO)
MDJ Desire HD 4.6
Topia HD and others...
None of them worked, the ONLY ONE that worked was [DL DesireZ v2.1][SD/NAND] (note, not tested version 2.2, ONLY 2.1)
It took a looong time to boot, but worked fine.
Now that we have WP7 (not everyone will want this permanently) we should have SD roms that are compatible with MAGLDR. Even because MAGLDR is way faster than waiting for WM 6.5 to boot.
I loved WM 6.5 in the days, but now, several of us don't want to deal with it anymore, and are just here for the two new OSs.
I would like to see some development in the SD ROMs again, so they can have newer and better kernels (the ones used with MAGLDR) and full compatibility with future development for MAGLDR and NAND.
We could even have two Android builds, for those who don't want WP7.
One for NAND and one for SD, like a Gingerbread and a stabler Froyo
Anyone agree with it?
Greetings, Santroph.
santroph said:
I'm making this thread here because I can't see anything being done to remedy this problem.
I have tried more than 5 roms that I have used in the past in SD era with MAGLDR 1.12 in the option "AD SD" and none worked. This SHOULD be easy, but it's not.
I have tried to change kernels for the new ones, thinking this would be the right way to do so, since the old ones expected haret and windows to work. This didn't work too.
To name a few...
NexusHD2-FRG83D V1.8 from Tytung (the best in the old days for a clean froyo, IMHO)
MDJ Desire HD 4.6
Topia HD and others...
None of them worked, the ONLY ONE that worked was [DL DesireZ v2.1][SD/NAND] (note, not tested version 2.2, ONLY 2.1)
It took a looong time to boot, but worked fine.
Now that we have WP7 (not everyone will want this permanently) we should have SD roms that are compatible with MAGLDR. Even because MAGLDR is way faster than waiting for WM 6.5 to boot.
I loved WM 6.5 in the days, but now, several of us don't want to deal with it anymore, and are just here for the two new OSs.
I would like to see some development in the SD ROMs again, so they can have newer and better kernels (the ones used with MAGLDR) and full compatibility with future development for MAGLDR and NAND.
We could even have two Android builds, for those who don't want WP7.
One for NAND and one for SD, like a Gingerbread and a stabler Froyo
Anyone agree with it?
Greetings, Santroph.
Click to expand...
Click to collapse
Problem:
Phone7 formats the sd card in an unknown file format.
That makes it presumably impossible to linux to load from there...
You would have to switch sd card
I agree with the suggestion of having dual boot (WP7/Android), in fact I even thought about it yesterday ...
What about having 3 partitions on SD ? 2 for WP7 and 1 for Android ...
domenukk said:
Problem:
Phone7 formats the sd card in an unknown file format.
That makes it presumably impossible to linux to load from there...
You would have to switch sd card
Click to expand...
Click to collapse
Yeah I know about this, but several of us, myself included have several SD cards.
I can pass for the trouble of changing SD cards from time to time to boot a completly different OS, with several other possibilities.
And I was talking about Android NAND / Android SD combinations as well.
Like I said we could have a Gingerbread experimental in nand, but keep a really stable Froyo in SD as our main build, or the other way around, a lot of us have big enough cards to do that.
Santroph.
I'm tested lot android SD too.
PSfreedom worked only but if the DL DesireZ v2.1 is working..what's the problem?
loyalhudy said:
I'm tested lot android SD too.
PSfreedom worked only but if the DL DesireZ v2.1 is working..what's the problem?
Click to expand...
Click to collapse
The problem is that we only have a few SD roms working. And for example DL DesireZ v2.1 works, but DL DesireZ v2.2, which is newer and just lauched, doesn't work, the support is gone
And we don't have as much roms as we had to choose in the past. I am trying to use WP7, to see if it is a viable alternative to my daily use, but I don't want to give up Android. Since we can't have WP7 and AD Nand at the same time, SD is the only alternative, and we have to get whatever is working instead of a lot of good builds like we have in Nand now.
If the devs start to make more sd builds closer to the Nand ones (same kernels and modules, which they can do now, since they will all be using the same hardware startup MAGLDR) we would have a lot of alternatives too.
Like I said, one of the best roms we ever had, tytung NexusHD2 froyo, doesn't work.
Santroph.
P.S: I'm willing to help any dev that need help. I'm a developer too, but a software one, not a cooker
I'm not a dev but I try to get it ...I took 4GB sd and booted wp7, connect sd via usb reader to pc, copied the wp7 filesystem to my 16gb sd card...wp7 says I got 3.5GB disk space ^^...means: wp7 uses 3.5GB, 11,5GB free sd space . formatted other partition as fat32, but windows7 didn't find it. Now I'm trying around to get it working ...will post news
EDIT: WP7 got 3.5GB disk space, now booting MDJ Froyo HD 4.6 from sd card ...So I got WP7/ Android dualboot
domenukk said:
Problem:
Phone7 formats the sd card in an unknown file format.
That makes it presumably impossible to linux to load from there...
You would have to switch sd card
Click to expand...
Click to collapse
I succeed to flash WP7 rom without SD card inserted. Inserting back the SD card after installation shows that SD storge with full size(not under WP7) and SD android rom (DL DesireZ v2.1) works fine with MAGLDR 1.12. Booting WP7 again will not destroy it, too. This may be a temporary method, while the free space left in WP7 becomes around 130MB which may not satisfy many demands .
was the WM7 functional?
http://www.darkforcesteam.com.cn/thread-25910-1-1.html
I'm going to attempt those steps tomorrow, but I don't know if I'll be following them properly as the translation isn't too good.
But maybe someone else can understand it and translate it properly
jcsy said:
was the WM7 functional?
Click to expand...
Click to collapse
fully functional. this method is like the one metioned above from DFT forum
ike2903 said:
I'm not a dev but I try to get it ...I took 4GB sd and booted wp7, connect sd via usb reader to pc, copied the wp7 filesystem to my 16gb sd card...wp7 says I got 3.5GB disk space ^^...means: wp7 uses 3.5GB, 11,5GB free sd space . formatted other partition as fat32, but windows7 didn't find it. Now I'm trying around to get it working ...will post news
EDIT: WP7 got 3.5GB disk space, now booting MDJ Froyo HD 4.6 from sd card ...So I got WP7/ Android dualboot
Click to expand...
Click to collapse
in WP7 installation steps it is mentioned that if you remove the sd card the windows will be destroyed? can you please confirm that after trying android and going back to WP7 there are no issues?
I agree... we need more devs developing for sd android again.
ike2903 said:
I'm not a dev but I try to get it ...I took 4GB sd and booted wp7, connect sd via usb reader to pc, copied the wp7 filesystem to my 16gb sd card...wp7 says I got 3.5GB disk space ^^...means: wp7 uses 3.5GB, 11,5GB free sd space . formatted other partition as fat32, but windows7 didn't find it. Now I'm trying around to get it working ...will post news
EDIT: WP7 got 3.5GB disk space, now booting MDJ Froyo HD 4.6 from sd card ...So I got WP7/ Android dualboot
Click to expand...
Click to collapse
This could be the best way to do things...
Can you please make a kind of Tutorial?
I understood what you said, and I can probably replicate it (surely will try) but some people would be really glad to have a tutorial.
I have a single problem with your approach, my biggest card, the 16gb one, was the one used for WP7, so I will have to reformat, and since I already got my WP7 working with marketplace and activated, I don't want to mess with it.
If I only had used the 8gb or 2gb card, I would be able to do it....
Santroph.
The best way to know how to do this, would be to have a HD2 that has not a fully working copy of WP7, so we can test it as much as we can.
The biggest problem for me now, is that I don't have how to make a backup of my WP7 installation, or else I would do it and make a tutorial on how to use the dual boot.
Even with the option of using only one card, the SD rom version must be compatible, which in the present time, they are not (most of them).
Santroph.
i've readed all of thread.. but yet i don't understand if it works or not.. especially with ike2903 tutorial to format SD card method...
santroph said:
This could be the best way to do things...
Can you please make a kind of Tutorial?
I understood what you said, and I can probably replicate it (surely will try) but some people would be really glad to have a tutorial.
I have a single problem with your approach, my biggest card, the 16gb one, was the one used for WP7, so I will have to reformat, and since I already got my WP7 working with marketplace and activated, I don't want to mess with it.
If I only had used the 8gb or 2gb card, I would be able to do it....
Santroph.
Click to expand...
Click to collapse
Yes, Tutorial please Thanks
jenzy1985 said:
Yes, Tutorial please Thanks
Click to expand...
Click to collapse
+1, been thinking of doing this and would be nice to follow your lead.
daysey said:
+1, been thinking of doing this and would be nice to follow your lead.
Click to expand...
Click to collapse
+ 9!!!
ike2903 said:
I'm not a dev but I try to get it ...I took 4GB sd and booted wp7, connect sd via usb reader to pc, copied the wp7 filesystem to my 16gb sd card...wp7 says I got 3.5GB disk space ^^...means: wp7 uses 3.5GB, 11,5GB free sd space . formatted other partition as fat32, but windows7 didn't find it. Now I'm trying around to get it working ...will post news
EDIT: WP7 got 3.5GB disk space, now booting MDJ Froyo HD 4.6 from sd card ...So I got WP7/ Android dualboot
Click to expand...
Click to collapse
the pc actually read the WP7 parition (or recognized that one existed)?
Hi
I have searched around the forum without any luck on how to remove the windows phone 7 from my uncle's HD2. How can reflash it to the stock rom, which windows 6.5 because activating 7 on the phone is a bit hard and i m not really getting how to do. So I'll just get it back to stock rom and wait for some thing more stable and easier.
Please help me, my uncle's contacts are on this phone, and he cant get it back to normal.
if u didnt backup the phone contacts i guess they are gone because after a flash everything gets lost...u can flash back the stock winmo rom...hold volume down button and start the phone wait till u see the three colored screen...plug in pc till u see usb writing instead of serial...then start flash stock rom from pc...but nothing from ur data will be there anymore...so if u still have the contacts on phone make a backup before u flash
Man. You have two ways.. even to flash nand android or returning back to wm6.5 to return to wm 6.5 u first turn off ur fone, press volume down and power botton to go to the multi color screen .. and then flash ur favorate wm 6.5 rom.. and sorry to tell u that the contacts are alreqdy rlearased if they were on wm 6,5 ..
You can reflash Windows Mobile 6.5 by holding down the volume- button as you power on the phone. Then just flash a stock ROM through the bootloader like normal.
As for his contacts being on the phone, if they were in Windows Phone 7 you can back them up using a Gmail account, and if they were on Windows Mobile 6.5, then I'm sad to say that they have been erased.
htc hd2 does not show sd card
Thanks guys i have revereted back to win 6.5 on my htc hd2 but i have problem with sd card my phone dose not show any card is installed
You have to format the SD card.
I don't know if you can do it in WinMo (probably you can)
Otherwise you'll have to do it on your pc.
akhil3 said:
Thanks guys i have revereted back to win 6.5 on my htc hd2 but i have problem with sd card my phone dose not show any card is installed
Click to expand...
Click to collapse
Try formatting your memory card.
akhil3 said:
Thanks guys i have revereted back to win 6.5 on my htc hd2 but i have problem with sd card my phone dose not show any card is installed
Click to expand...
Click to collapse
I formatted the SD card back to FAT32 in a digital camera.
You can-
You can format the SD card on Win Mo 6.5
Go to tools/format SD card.
Format it to whatever you need.
depends whether Wm6.5 can recognize this "formatted" partition created by WM7
if unable to, you probably need some tools or software
or use a digital camera or for me, SD card reader etc
jcsy said:
depends whether Wm6.5 can recognize this "formatted" partition created by WM7
if unable to, you probably need some tools or software
or use a digital camera or for me, SD card reader etc
Click to expand...
Click to collapse
You can use Android. It works!
Go online and google "free partition manager".
Or look around the various threads, theres links to partition and formatting software in the wp7 threads because of this exact reason...
Cheers...
To get your micro sd card formatted back to its original size just use the tool on *THIS* website and when formatting go into the options and change FORMAT SIZE ADJUSTMENT to 'ON' so it detects the hidden partition.
Mark.
To format SD cards
Normally i just flash clock work mod recovery, and do a format from there, its pretty easy and i can set up my SD card for Ext2 while at it
hi, I assume when we flash stock rom during bootloader "usb" after we installed wp7, things like hspl, magldr , radio will be removed as well.
is there anyway that we can keep wp7 , and leave android sd build in another sd card ? So when we want to build android, we simply just swap the wp7 sd card with the android build sd card. is there anything we need to do to achieve this ?
pool7979 said:
hi, I assume when we flash stock rom during bootloader "usb" after we installed wp7, things like hspl, magldr , radio will be removed as well.
is there anyway that we can keep wp7 , and leave android sd build in another sd card ? So when we want to build android, we simply just swap the wp7 sd card with the android build sd card. is there anything we need to do to achieve this ?
Click to expand...
Click to collapse
If you flash a stock WM6.5 rom via bootloader usb mode then the only thing that is lost is Magldr and your previous rom. HardSPL and your Radio can only be overwritten by flashing a stock WM6.5 rom via microsd card method.
When you are using WP7 you CAN NOT hotswap microsd cards or your new card and the previous card you took out will not be recognized by WP7 anymore. I have seen some posts of people saying you can load Android via sd card while using WP7 but I have not done this and cannot verify its validity.
Mark.
More trouble...
I went back to 6.5 ...And my phone reports only 180 Mb of memory instead 512 !!! I tried task29, flashing Stock rom, Custom roms, everything... And it still not going over 200MB of total memory, I can feel the phone lagging!
So, f this SD-card formatting issue, what about the more serious problem of downsizing HD2's memory in half after WP7!!!
Anyone, please HEEEELP!!!
superpeca said:
I went back to 6.5 ...And my phone reports only 180 Mb of memory instead 512 !!! I tried task29, flashing Stock rom, Custom roms, everything... And it still not going over 200MB of total memory, I can feel the phone lagging!
So, f this SD-card formatting issue, what about the more serious problem of downsizing HD2's memory in half after WP7!!!
Anyone, please HEEEELP!!!
Click to expand...
Click to collapse
Is that internal memory, storage memory? What is it giving for total, used and free?
Can you take a screenshot and post it?
If your phone only registered a total of 180Mb then its very doubtful that the stock rom would have flashed so im sure the memory is still there.. A screenshot of your memory screen would be very useful.
Mark.
mskip said:
If you flash a stock WM6.5 rom via bootloader usb mode then the only thing that is lost is Magldr and your previous rom. HardSPL and your Radio can only be overwritten by flashing a stock WM6.5 rom via microsd card method.
When you are using WP7 you CAN NOT hotswap microsd cards or your new card and the previous card you took out will not be recognized by WP7 anymore. I have seen some posts of people saying you can load Android via sd card while using WP7 but I have not done this and cannot verify its validity.
Mark.
Click to expand...
Click to collapse
i see. thanks for ur advice. just curious , when we install our wp7, is our wm6.5 still in phone ? cos my energy start up screen is still there . or did i missed one step in front to do a task 29 ?
if i want to go back to my sd android and wm6.5, the step is just flash a wm6.5 (ex: energy rom) rom over right ? or i have to do a task 29 first ?
mskip said:
Is that internal memory, storage memory? What is it giving for total, used and free?
Can you take a screenshot and post it?
If your phone only registered a total of 180Mb then its very doubtful that the stock rom would have flashed so im sure the memory is still there.. A screenshot of your memory screen would be very useful.
Mark.
Click to expand...
Click to collapse
mskip, here is what WM 6.5 reports after I:
- removed the SD card (formatted by WP7, did use the sdformatter tool to revert back to fat32, thank for that tip which you posted on some other thread
- went into bootloader
- did the task29
- flashed the 3.14 stock rom (comes with .51 radio)
DEVICE:
Total storage : 180.98 MB
Used storage: 53.71 MB
Free storage: 127.27
Total program: 336.93 MB
Used program: 136.41 MB
Free program 200.53 MB
I tried some other ROMs, like CleanEx Core V12 which report more memory, but not as nearly as they should (its a 576 mb rom and I flashed a 50.14 radio before the ROM) and it looks like this:
DEVICE:
Total storage: 283.95 MB
Used storage: 16.36 MB ?!??!
Free storage: 267.58 MB
Total program: 474.00 MB
Used program 275.59 MB
Free program 198.24
I was wondering if it would be possible to either Boot Windows Phone 7 through MAGLDR from the SD Card like you can Android by maybe partitioning the SD Card so it cn have it's own space?
Or a more realistic option which would be to have a NAND ROM that includes both Android and WP7 installed to the NAND and partition the SD card for storage? This second option I believe could be possible if the NAND is partitioned correctly to allow them both to run and then you could select them in the MAGLDR!
I would like some dev feedback on this as I would try building a ROM myself but I don't know the workings of the partitioning system in MAGLDR well enough to try!
Thanks in Advance for any help!
Maby this is what you are looking for?
http://forum.xda-developers.com/showthread.php?t=913815
Cheers
Fabian1985 said:
Maby this is what you are looking for?
http://forum.xda-developers.com/showthread.php?t=913815
Cheers
Click to expand...
Click to collapse
I've seen that but what I want is to boot Android and WP7 from NAND NOT run android from the SD Card like that guy done because that makes android run slow and I want android as my primary OS!
microang said:
I've seen that but what I want is to boot Android and WP7 from NAND NOT run android from the SD Card like that guy done because that makes android run slow and I want android as my primary OS!
Click to expand...
Click to collapse
I run Android from SD as my primairy OS, WP7 is on NAND just to play with and test it. I tried Android on NAND, but to me it wasn't noticably faster then when running from SD.
Cheers,
/Cacti
Snap I'm using sd build of Android from magldr and it runs fine even boots ok, there might be a little lag when doing something the first time but other than that its great
DJGurth said:
Snap I'm using sd build of Android from magldr and it runs fine even boots ok, there might be a little lag when doing something the first time but other than that its great
Click to expand...
Click to collapse
Well the thing is I like to use a fully fledged Desire HD ROM and it's stupidly slow from the SD card... my current build is squashfs'd so only takes up about 200mb for the actual OS and I'm sure WP7 could be fitted in the rest of the space and like I'm doing now I can use EXT4 on the sd for data! Now what's needed is if someone can build a hybrid ROM!
le_cactus said:
I run Android from SD as my primairy OS, WP7 is on NAND just to play with and test it. I tried Android on NAND, but to me it wasn't noticably faster then when running from SD.
Cheers,
/Cacti
Click to expand...
Click to collapse
Hi, anyone can share how to u do this ? is it through the method that uses 2 sd cards during the formatting stage ?
Btw, what if i dont mind swapping sd cards for diff os ? Can this be done and how ? I tried to insert another sd card which I previously use for my android sd build, tried the sd boot , it gave an error of sd kernel . anyone can advise ?
Thanks !!
Dear All Experts....
First of All Thanks to all.............
I have one question I have android 2.3.5 cynogenmod rom install on my htc hd2
on 16 GB card.... now i also want to taste win 7 on other card.....
Is it possible to use both Os without changing any setting while swaping the cards......
The HD2 (ATM) can't boot Windows 7.
But if you mean WP7, then no.
No because the HD2 can only hold one OS on its NAND, either WP7 or Android.
However, you can dual boot both OS's under two conditions:
1- It must not be a mango version (e.g nodo) .. because Mango locks up the SD and you can't use it for android. (AFAIK)
2- Android must be on the SD (an SD version).
Marvlesz said:
The HD2 (ATM) can't boot Windows 7.
But if you mean WP7, then no.
No because the HD2 can only hold one OS on its NAND, either WP7 or Android.
However, you can dual boot both OS's under two conditions:
1- It must not be a mango version (e.g nodo) .. because Mango locks up the SD and you can't use it for android. (AFAIK)
2- Android must be on the SD (an SD version).
Click to expand...
Click to collapse
Isn't there a SD card unlock for Mango ?
No its not possible to run both os off two sd cards
I got dual boot on my hd2 mango running as nand and android off the sd card
There is a storage unlock.cab file which partitions your sd card to whatever size you want to run android off the sd card after you flash mango..
Hi Moschino02
Can you tell me the Process for There is a storage unlock.cab file which partitions your sd card to whatever size you want to run android off the sd card after you flash mango..
Harshad3483 said:
Hi Moschino02
Can you tell me the Process for There is a storage unlock.cab file which partitions your sd card to whatever size you want to run android off the sd card after you flash mango..
Click to expand...
Click to collapse
a) Got to the back to future WP7 rom thread.
b) Read.
You just install the cab to unlock card and resize partition and then put your android files on the sdcard and boot android via magldr.
yeah but after i did that i cannot boot wp7.I use hyperdroid nand rom and yuki's mango build.Can anyone help i'm new in dual boot and i really dont know what to do but i want to fix it.If there is some way without flashing a stock rom and install the mango all the way from the beggining please share
I have clearly stated that you cannot boot Android (NAND) along with WP7, yet you tried to use HyperDroid NAND + WP7?
You need Android on your sd (refer to the SD development forum) and WP7 on NAND.
Hey guys,
I have kind of a bad time figuring out what the requirements for Windows Phone 7 are. I checked my SD card (Kingston 4GB Class 4) - Seems to be working.
I read sth. about WP7 encrypted SD Cards. Does that mean that I have to unlock them somehow after they are formatted for Windows Phone?
Now I'm wondering which rom I should install. I would go for Tango, but I'm wondering if the experience is the best, since it's not released yet. So which Rom is the most reliable? (Mango or Tango)
And how should I partition the NAND? Can I use the NAND toolkit for that?
Besides activating the rom, do I have to mind anything else?
Do I always have to update via a Windows machine?
Thanks in advance!
PS: Right now I'm on Android with clk installed.
Any "compatible" SD card is fine with WP7 ut it is recommended to use 8gig or even 16gig card since most of the apps are a it huge. WP7 installs on NAND so what ever you need from there make a backup/ copy of it.
if your phone has HSPL 2.08 just press the Vol Down & Power & you will see a tri-color screen with HSPL 2.08
this is what I did to install Tango
- HSPL 2.08
- Task 29
- Radio_15.42.50.11U_2.15.50.14
- MagLDR
- MagLDR Repartition 300/ 45
- Magldr
- Service
- Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP
- Done!
if still the error persist try replacing the SD card coz mine had a problem with Trancend's 16gig card.
mengfei said:
- MagLDR
- MagLDR Repartition 300/ 45
- Magldr
Click to expand...
Click to collapse
What is the difference about MagLDR and Magldr?
I can't install WP7 too.. most of my [email protected] achievement is to get bootloop
AzzurPL said:
What is the difference about MagLDR and Magldr?
I can't install WP7 too.. most of my [email protected] achievement is to get bootloop
Click to expand...
Click to collapse
lol, there's no difference between MagLDR and magldr. (Except capital letters) Magldr stands for Magloader.
---------- Post added at 03:39 PM ---------- Previous post was at 03:34 PM ----------
Elmo108 said:
Hey guys,
I have kind of a bad time figuring out what the requirements for Windows Phone 7 are. I checked my SD card (Kingston 4GB Class 4) - Seems to be working.
I read sth. about WP7 encrypted SD Cards. Does that mean that I have to unlock them somehow after they are formatted for Windows Phone?
Now I'm wondering which rom I should install. I would go for Tango, but I'm wondering if the experience is the best, since it's not released yet. So which Rom is the most reliable? (Mango or Tango)
And how should I partition the NAND? Can I use the NAND toolkit for that?
Besides activating the rom, do I have to mind anything else?
Do I always have to update via a Windows machine?
Thanks in advance!
PS: Right now I'm on Android with clk installed.
Click to expand...
Click to collapse
I use HD2Owner Tango Build. It's rock stable and fast. Android can't beat it. Advantages bsides speed and simplicity are excllent camera and 720p video recording. Battery life is pretty decent, too.
Installation is different to Android NAND. All you have to do is HardSPL you phon, install proper Radio and Task29 before installation. When you finished HD2Owner Rom download (see my signature), there'll be a DWI.exe which need to be run while your HD2 is connected through 4. USB Flasher
But everyone tell as about something other.. once you need to click Services > uset last NAND and sth. about SD... next doesn't tells it.
How long can take first boot with 16GB card? I installed Tiger.. go sleep and mornign nothing change (about 6h of "loading system"). Now I fight with that whole day and nothing... Android is simple like 2+2, but WP7 is more complicated.. Once it says "you have wrong SD" other time it doesn't start. It's fak up to my brain...
I've Euro Leo 512MB and Kingston 16GB mSDHC cl4! and I looked into topic about SD cards and other posted about this card in positive.
I did every tutorial from this forum.. noone works for me
My neighbor bought Samsung Omnia W and I want to test this WP7, he is incredibely happy about OS
#EDIT
OK, I install [email protected]'s rom and after 25 minutes od loading system I turn off phone by remove battery and I checked SD card.. nothing changed.. 1 partition fAT32 with my files. But tutorials write about 2 partitions.. 200MB FAT and rest of unidentified to RAID. How to prepare that? Maybe that's the problem.. it's too big card for first run?
The size of your card isn't a problem. When you read in tutorials about 200MB partition and RAID partition, the OS takes care of this, you do nothing.
HD2Owners ROM is a very good place to start with WP7.5 on HD2.
Peace
Edit: ROM installation shouldn't take more than 5 minutes, regardless of microsd card size, once preliminary steps are taken =)
So I do something wrong.. why everyone can have WP7 but not me? You know how many times I do today Wipe Task29? Bllion? more or less
Flashing partitions one by one, flash good radio, flash aMAGLDR 1.13... I think I do everything ok but it's not.
OK, try to install next thousand of times...
#EDIT
LOL by mistake I install without SD card and install correct but one problem.. when I put SD card into phone, it kaboom, have bootloop.
I think the bootloop is because you installed without the sd card.
Reinstall using option 5 in magldr with the sd card in place and it should be good.
Peace
OK I did it, but "Storage card not working", can I set partitions on other device such as PC with gParted? Any idea to which code of partition have this second part of SD? I'm bored of that
I must admit, the partitioning of the SD card by windows can present a serious flaw to rom installation, especially when things don't go according to plan and you end up with an unrecognised SD card.
Do you have a spare one you could use?
Honestly, this would be easiest way....
Peace
---------- Post added at 05:30 PM ---------- Previous post was at 05:26 PM ----------
Is your SD card recognised if plugged into a pc? If so then reformatting is the way forward, then you should be able to use it again. Activekilldisc or gparted, any of those should do it - as long as it is "seen" by the pc.
Peace
Today I kamed new allocation table (MBR too) and make partition whole disk primary fat32, format it in Nokia E71 (like in one of topics like) and phone can't reformat it now to 2 partitions (200MB fat + rest unidentified). I dont know why.
OK I give up, thanx for any help. I back to Android.