SGS not working on all wlan's - Galaxy S I9000 General

My SGS connection to my linksys router at home is not working correctly. Sometimes it's all fine - sometimes it hangs forever. But on many other routers, e.g. at work, no problem!
I'm using Darky's 8.1, but the problem also existed on the stock JPY 2.1.1. Please help?
I have also heard that it is possible to downgrade the wlan drivers in the phone, is that correct? (id like to try)

Related

[Q] wifi unable to obtain ip address after flash

Forgive me if I missed it, but I've been trying to figure out the answer to a problem with my wifi connection.
Basically I had a rooted stock release on my samsung fascinate and I wanted to get the newest official version. So I installed clockwork mod via the marketplace and downloaded the most recent official update's .zip from the web. I couldn't get clockwork to work, tried several things but just couldn't get it to flash the update, (kept saying the update.zip was unsigned). So I thought... "oh well I'll just use odin to flash back to unrooted stock, update 2 or 3 versions ota, then root again." This worked but somewhere in the mess I lost the ability for wifi to start up, just cycles on and off every couple seconds when you try to turn it on.
I flashed back to stock via odin again, then it would stay powered on. However, now while the phone can see the networks when I try to get it to connect it sits on the "obtaining IP address from..." option until it finally says unsuccessful. I've tried purposely inputing the wrong wep password but it doesn't complain it's wrong, so I don't think it's even getting that far.
That's pretty much the state of it now, however I also tried updating to both the stock and debloated versions of the leaked froyo rom from a post here with no change, and have cleared cache/hard rest several times.
Any help would be great. Thanks in advance!
What rom are you currently on, and what modem (baseband) are you currently on?
Number one, you need to flash CWM with Odin, or else you get that unsigned error. Number two, have you tried manually inputting the ip address, subnet, and gateway? If you try manually and it doesn't work, then try power cycling the router. (unplug it for 30 seconds).
Since you say you Odin-ed back to stock it's unlikely that the wifi got messed up there, so I'm more inclined to check the router. What model router is it?
I'm currently using a rom of the leaked froyo eb01 which was debloated / deodexed, with root and clockworkmod, downloaded from a post here on the site that was left by TAPOUT27 (I'd link to it but the forum will not let me). Baseband is S:500.04.V.EB01. Was considering installing superclean, but decided I don't want to keep switching it up while trying to troubleshoot.
By the time I figured out I needed to flash clockwork via odin I had already flashed back to stock... (my noob mistake)
I thought it might be the router at first too, but I've power cycled it, my other devices (laptop, wireless bridge, wifes stock fascinate) all work. and I've also tried it with a couple networks that I don't usually have a problem with in work to no avail. Also tried using a static IP on phone, but not working.
By any chance are you using a time warner modem with built in router?
The router at home is an actiontec MI424WR that Verizon fios installed, at work it's a Verizon mifi 2200.
I was able to add another piece to the puzzle today and now it only gets stranger. I tried connecting via WPA encription and it worked fine. So it looks like it's only WEP and open networks that are broken. Tried with both routers to verify.
bump......
Whoa this.one is a mystery. I'll try to think of some things to try..
I was beginning to think it was a hardware thing until it connected via WPA, now I'm sure it's got to be a software thing.
Try resetting your router..worked when I had same issue.
Bob
Sent from my SCH-I500 using XDA Premium App
Tried that, but it's not just one router, it's three, and they all work when other devices try to connect. on all settings not just WPA.
I had similar problem and i run 2. Make sure master has DHCP server on and the 2 slaves do not act as dchp servers, also make sure settings on all 3 for RIP are set to"both" and use RIP1 which is universal. That solved my issues connecting.
Rock on
kikakee said:
Tried that, but it's not just one router, it's three, and they all work when other devices try to connect. on all settings not just WPA.
Click to expand...
Click to collapse
Samsung Fascinate - EB16/Froyo.
SuperClean 2.6 Voodoo
MTM iOS keyboard
Cyanogen Boot Animation
Warning: I know just enough to be dangerous
Dalamar1320 said:
Since you say you Odin-ed back to stock it's unlikely that the wifi got messed up there, so I'm more inclined to check the router.
Click to expand...
Click to collapse
Please don't take this the wrong way, but your reasoning is backwards. When troubleshooting a problem, the most likely culprit is always whatever changed most recently. That doesn't mean that's always the answer, but in most cases, whatever changed right before the issue happened is the cause of the problem.
Restoring with Odin is a massive change, and is not foolproof. Since wifi worked fine before the Odin flash, doesn't afterward, and other wifi devices still work on the same router, the logical explanation is that something went haywire in the Odin flash. I would suggest using all available wiping methods (factory reset within the OS, and data/cache/dalvik cache within CWM), and then attempt another Odin flash using Adrynalyne's stock DI01 package, and see what happens after that.
Posted from my EB01 SuperClean Fascinate with Voodoo

Wifi not working?

So I dont exactly know what is going on. I go to connect to a wireless network and it will start to connect, say its obtaining IP adress, and then refresh and start all over again. It never actually connects and stays connected. I know its not the router because I have tried numerous networks (that worked before) and now they just stopped working. I did have trouble with root and I re unlocked the tablet because root wasn't working. Is there anyway I messed something up? I installed the 3.2.2 rooted rom and now I flashed back to moray both with the same non-working wifi result.
Anyone know what is going on?
smith3jk said:
So I dont exactly know what is going on. I go to connect to a wireless network and it will start to connect, say its obtaining IP adress, and then refresh and start all over again. It never actually connects and stays connected. I know its not the router because I have tried numerous networks (that worked before) and now they just stopped working. I did have trouble with root and I re unlocked the tablet because root wasn't working. Is there anyway I messed something up? I installed the 3.2.2 rooted rom and now I flashed back to moray both with the same non-working wifi result.
Anyone know what is going on?
Click to expand...
Click to collapse
Did you by chance restore system apps and data through Titanium Backup? Sometimes wifi is messed up by restoring a previous version of the system app and data over a newer version supplied by a custom Rom.
You might want to just wipe everything in recovery, reflash your Rom and set it all up again fresh.
my WIFI was messed up when I swiched Kernels way back. I had forgotten to push one of the files... when you switched ROMs, did you wipe first or did you just install one over the other?
have similar issue after going from hammerhead 3.2 to moray 2.2.2.
Infrastructures wifi works fine, but whe trying to connect the xoom to an ad-hoc (from Nokia jokiuspot) just keeps displaying "obtaining IP address". Never had a problem with hammerhead? Guessing it has something to do with the dchp client on the Xoom¿
Certainly not a big problem, and something I am more than happy to live with as is.
everything else working spot on. Using a UK wifi only!

WiFi not working

Hello,
I just set up Swiftdroid v2.0 RC5 with my 540, however, I wanted to set up WiFi after that to download some apps. The problem is that I can't connect to my router, after entered the correct key it says 'Authentification', and some seconds later it aborts and says 'Deactivated', it simply doesn't connect, while other machines (i.e. my laptop, my sister's PC) are able to use our WiFi.
Help would be appreciated.
Regards.
thiaZ99 said:
Hello,
I just set up Swiftdroid v2.0 RC5 with my 540, however, I wanted to set up WiFi after that to download some apps. The problem is that I can't connect to my router, after entered the correct key it says 'Authentification', and some seconds later it aborts and says 'Deactivated', it simply doesn't connect, while other machines (i.e. my laptop, my sister's PC) are able to use our WiFi.
Help would be appreciated.
Regards.
Click to expand...
Click to collapse
Flash the ROM again I don't have problems with WiFi..
I actually flashed RC4 twice yesterday, I thought RC5 would solve that problem, so I installed it, sadly it didn't. I don't think that that problem is caused by a hardware error as WiFi worked with the raw 2.1.
thiaZ99 said:
I actually flashed RC4 twice yesterday, I thought RC5 would solve that problem, so I installed it, sadly it didn't. I don't think that that problem is caused by a hardware error as WiFi worked with the raw 2.1.
Click to expand...
Click to collapse
Are you sure that you entered the correct password? If you know it's correct, revise your router configuration and change the password of the wireless point to something different and try again. If all else fail, install Connectify on a Wifi compatible computer and tether your internet connection.
jhonnyx1000 said:
Are you sure that you entered the correct password? If you know it's correct, revise your router configuration and change the password of the wireless point to something different and try again. If all else fail, install Connectify on a Wifi compatible computer and tether your internet connection.
Click to expand...
Click to collapse
its either the wrong password or your system!!
i had a similar problem but just reflashed and problem solved!!

connects but can't get wifi

I hope someone can help me with this.
I have an ideos X5 and this happens with both aurora and miui roms (all ICS).
At home, I can connect perfectly to my WPA2 PSK network and use it.
At work, I can connect to the WPA2 PSK network, I get all dhcp settings, but can't connect to anything. I can't even get dns resolution for google.com.
The laptop and my ICS tablet both work perfectly on these networks.
Is there anything I can do to troubleshoot and solve this problem?
Both aurora and miui already worked in this network, but I can't reproduce it now, even with wipes and different versions installed.
Happns the same with since yesterday! I'm using the Elora ROM, and already reinstalled it over and over and still doenst work =( any help??
luiscarlosmatos said:
Happns the same with since yesterday! I'm using the Elora ROM, and already reinstalled it over and over and still doenst work =( any help??
Click to expand...
Click to collapse
Go to the latest Elora/Aurora zip/update that worked and extract wpa_supplicant from system/bin/
replace it with the one on your phone.
reboot

Wifi problem 4.0.4 ++ U880 Roms

So I flashed with several roms, like AuroraSP, CM 10.1/10.2 And non of them the wifi actually worked, or It did work, but there was a bug or something like a connecting loop, Where i attempt to connect to the network, it says connecting then it stops connecting, over and over.
Wifi workes in 2.2 and 2.3 default firmware, and custom roms.
So i don't see what the problem is, as It's bothering me sick that i cant use 4.x roms.
Miikalsen said:
So I flashed with several roms, like AuroraSP, CM 10.1/10.2 And non of them the wifi actually worked, or It did work, but there was a bug or something like a connecting loop, Where i attempt to connect to the network, it says connecting then it stops connecting, over and over.
Wifi workes in 2.2 and 2.3 default firmware, and custom roms.
So i don't see what the problem is, as It's bothering me sick that i cant use 4.x roms.
Click to expand...
Click to collapse
Do u still face that problem? if yes then check ur mac address to these roms. if it's 00:00:00.. then u should put the right one with a terminal emulator. go to wifi hit properties and check the wifi mac address
wifi-mac address fixed
go to the Thread : http://forum.xda-developers.com/showthread.php?p=48437157#post48437157

Categories

Resources