My question is , how can I backup the contents out of the box to a .tar file that i can load up in the pda section of ODIN in the future if needed ?
The phone is baseband I9000UGJK4 kernel 2.6.32.9 and build froyo.ugjk4
I would like to have a permanent backup on hand of this before I change the os on it if I decide to do so or mess something up lol
So again , question is how can I back this up the the .tar file like we download from samsung for future flashing or restoring? Thanks guys
Strange that your phone came with JK4, since this version has been pulled from kies by Samsung.
I think you should upgrade to JL2
It came from futureshop just today , do you know how I can backup the contents to a .tar before I start changing things?
Update immediately to JL2. Don't load any other firmware until you have done so. This is important! Your likelihood of getting an internal SDACRD failure is very high until you do.
Important that if you use Odin, you select the flash boot loader option.
Strongly agreed. Use Kies (Samsung's official app) to FIRST do the upgrade. If anything happens during the upgrade, take it back immediately to the store for an immediate replacement (how long ago did you get the phone?).
zorxd said:
I think you should upgrade to JL2
Click to expand...
Click to collapse
DvTonder said:
Update immediately to JL2. Don't load any other firmware until you have done so. This is important!
Click to expand...
Click to collapse
gtg2 said:
Strongly agreed. Use Kies (Samsung's official app) to FIRST do the upgrade.
Click to expand...
Click to collapse
I agree with gtg2, DvTonder and zorxd. Upgrade to JL2 with Kies A.S.A.P. JL2 can prevent the dreaded dead internal SD card issue so many people are having.
Install Kies, plug in the phone, and update the phone.
When Kies is downloading JL2, it will go into your temp directory. Copy it to a different directory. I did and I have the original JL2 on my computer for when I need it.
If you can't get it off your computer, you can download it from here.
Ian
OK done that last night , bought it 2 days ago. Updated through KIES last night so now that worry is over. I cannot find the temp folder you say I should have the downloaded firmware in though , nothing in c:/windows/temp or in kies folders
Here this is stock JL2 just flash it with odin in PDA.
JL2.
You can find odin instructions in Allgamers Thread here.
One thing you might want to consider is rooting your phone, if your on JL2 use Super One Click located Here. Another Method to get root access would be to flash Hardcore's kernel odin versions and installation instructions Here. Once Hardcore's Kernel is flashed then just boot into CWM (VOL UP+Home+Pwr) and find root in the menu. I recommend going the Hardcore Kernel method just cause from there you can go to Doc's/Darky's/Seearm's or another custom rom of your Choice.
Once rooted get Root Explorer or equivalent file explorer and make a backup copy of the EFS folder . Store it on your PC somewhere. If anything ever happens and you need to return the phone to bell just flash the JL2 I linked with odin and you will be back to stock.
Samdroid_G_S said:
Here this is stock JL2 just flash it with odin in PDA.
JL2.
You can find odin instructions in Allgamers Thread here.
One thing you might want to consider is rooting your phone, if your on JL2 use Super One Click located Here. Another Method to get root access would be to flash Hardcore's kernel odin versions and installation instructions Here. Once Hardcore's Kernel is flashed then just boot into CWM (VOL UP+Home+Pwr) and find root in the menu. I recommend going the Hardcore Kernel method just cause from there you can go to Doc's/Darky's/Seearm's or another custom rom of your Choice.
Once rooted get Root Explorer or equivalent file explorer and make a backup copy of the EFS folder . Store it on your PC somewhere. If anything ever happens and you need to return the phone to bell just flash the JL2 I linked with odin and you will be back to stock.
Click to expand...
Click to collapse
It's too bad that we can't +1 up some responses to vote the best answer because this should be it.
OP: do this. If you're new to this, I can understand if this isn't very descriptive but he's linked you to all of the right info and those threads spell it out clearly.
gtg2 said:
It's too bad that we can't +1 up some responses to vote the best answer because this should be it.
OP: do this. If you're new to this, I can understand if this isn't very descriptive but he's linked you to all of the right info and those threads spell it out clearly.
Click to expand...
Click to collapse
You can lead a horse to water but you can not force him to drink. Anyway theres always the thank button
Sent from my I9000m using XDA's app.
stevenca said:
My question is , how can I backup the contents out of the box to a .tar file that i can load up in the pda section of ODIN in the future if needed ?
The phone is baseband I9000UGJK4 kernel 2.6.32.9 and build froyo.ugjk4
I would like to have a permanent backup on hand of this before I change the os on it if I decide to do so or mess something up lol
So again , question is how can I back this up the the .tar file like we download from samsung for future flashing or restoring? Thanks guys
Click to expand...
Click to collapse
why would you back up Jk4 it is broken version, I am surprised they Samsung still put it on the phone...please please upgrade to JL2 as soon as convenient and that backup
Now to answer your question, im not really sure if you can make a backup tar that you can flash later with odin. I think you're trying to do something like an iphone backup that saves everything, files and settings, even the background you had on your phone.
What i do is keep a copy of the stock firmware from samfirmware.com and then i make a backup using the app "titanium backup". You can find a free version and a paid version. Before i flash a new rom i backup everything and then copy the titanium backup folder from the internal sd to my computer, flash and then restore all user apps and settings. Flashing a new rom has never formatted my internal sd card so the folder is always there, i just copy it to my computer just incase. Ive been told not to do a restore of systems apps and settings on doc's rom though, not sure why. Maybe another user can clarify.
Lastly hold onto the receipt with your life because you will at some point in time end up with a dead sd card I recommend doing a stress test (does not void your warranty). Go to the thread here for stress test info.
Related
This may sound like a very dumb question but i am just now getting into the different things i can do with my phone. One of which is i have rooted it and installed clock work manager. I have seen A LOT of people talking about odin and using it to install froyo 2.2 on their phone. I was just wondering how you actually go about getting odin on your phone, or is it something installed on your computer to transfer files to your phone? my main objective of all of this is just to have froyo 2.2 finally installed on my phoneso if anyone could please give me the run down on this and the info i need to install 2.2 on my phone, or a web page that shows you how to install it once i have odin, it would be greatly appreciated!!!
Odin is a program used to flash .tar files (modem, kernel, system) onto your phone while in download mode.
A little poking around here (I would link you but I'm at work) and you will find the Samsung Drivers, The Odin program itself, and recently someone posted Odin files for 2.2
If you have the .zip of 2.2 (or Superclean 2.4) all you will have to do is flash the eb01 modem in Odin, then install the .zip file through CWM.
Follow ALL instructions in the threads you find to the T or it will be a pain in the ass to get your phone back.
Remember: When using Odin NEVER USE THE PHONE BUTTON. We use the PDA button for the Fascinate.
PDA = Good
Phone = brick (that's bad)
KitsuneKnight said:
Remember: When using Odin NEVER USE THE PHONE BUTTON. We use the PDA button for the Fascinate.
PDA = Good
Phone = brick (that's bad)
Click to expand...
Click to collapse
THIS!!!!
About the only way to actually BRICK the fascinate
Irish Cream said:
Odin is a program used to flash .tar files (modem, kernel, system) onto your phone while in download mode.
A little poking around here (I would link you but I'm at work) and you will find the Samsung Drivers, The Odin program itself, and recently someone posted Odin files for 2.2
If you have the .zip of 2.2 (or Superclean 2.4) all you will have to do is flash the eb01 modem in Odin, then install the .zip file through CWM.
Follow ALL instructions in the threads you find to the T or it will be a pain in the ass to get your phone back.
Click to expand...
Click to collapse
Hi I have a question for you. you said that after flashing to 2.2 eb01 modem then install the .zip file through CWM. I did flash to eb01 2.4 sc and I dont understand what do you do to install the .zip file through CWM? And what that .zip file get you to have?
ksbc616 said:
Hi I have a question for you. you said that after flashing to 2.2 eb01 modem then install the .zip file through CWM. I did flash to eb01 2.4 sc and I dont understand what do you do to install the .zip file through CWM? And what that .zip file get you to have?
Click to expand...
Click to collapse
If u get the eb01 sc Odin package...it comes with rom obviously so u don't flash anything in cwm. However... future roms you want will b flashed in cwm. All u do is boot into recovery,instal zip from sd cars, choose the zip from sd card....select it...and hit ok
Sent from my SCH-I500 using Tapatalk
Irish Cream said:
Odin is a program used to flash .tar files (modem, kernel, system) onto your phone while in download mode.
A little poking around here (I would link you but I'm at work) and you will find the Samsung Drivers, The Odin program itself, and recently someone posted Odin files for 2.2
If you have the .zip of 2.2 (or Superclean 2.4) all you will have to do is flash the eb01 modem in Odin, then install the .zip file through CWM.
Follow ALL instructions in the threads you find to the T or it will be a pain in the ass to get your phone back.
Click to expand...
Click to collapse
i have downloaded a dl09.tar.md5 file.... i thought that maybe this was what i was looking for to get odin or just to even have froyo installed... but neither my computer or my phone recognize the format that it is in.... am i just way off here?
boorad22 said:
i have downloaded a dl09.tar.md5 file.... i thought that maybe this was what i was looking for to get odin or just to even have froyo installed... but neither my computer or my phone recognize the format that it is in.... am i just way off here?
Click to expand...
Click to collapse
You are indeed way off... you are playing with fire with this stuff with the things you are trying without doing your homework. People here could give you links to everything you need, but all you have to do is search a little. Dont take it the wrong way, but when you brick your phone youll wish you didnt rush
Sent from my rooted froyo Fascinate
ziggy484 said:
You are indeed way off... you are playing with fire with this stuff with the things you are trying without doing your homework. People here could give you links to everything you need, but all you have to do is search a little. Dont take it the wrong way, but when you brick your phone youll wish you didnt rush
Sent from my rooted froyo Fascinate
Click to expand...
Click to collapse
No i completely understand what you are saying that is why i am doing my best to take anyones advice who might know more about this than i do (which is probably everyone). is there anything out there than can just give me a step by step as to what to do in the safest manner to accomplish putting 2.2 on my phone? because so far the closest i have came is receiving a E:failed to verify whole-life signature along with a E:signature verification failed message trying to install the update through clock work manager thanks for your help and advice
boorad22 said:
No i completely understand what you are saying that is why i am doing my best to take anyones advice who might know more about this than i do (which is probably everyone). is there anything out there than can just give me a step by step as to what to do in the safest manner to accomplish putting 2.2 on my phone? because so far the closest i have came is receiving a E:failed to verify whole-life signature along with a E:signature verification failed message trying to install the update through clock work manager thanks for your help and advice
Click to expand...
Click to collapse
Ok, easy way to get froyo... go in the fascinate develpment section of xda or droid forums and look for ODIN eb01 package. It will load you up froyo, new clockwork, and root your phone all in one shot. The directions are super easy, just follow them exactly. I did mine this way, you dont have to mess with clockwork at all, ten minutes total. Let us know how you make out.
Sent from my rooted froyo Fascinate
ziggy484 said:
Ok, easy way to get froyo... go in the fascinate develpment section of xda or droid forums and look for ODIN eb01 package. It will load you up froyo, new clockwork, and root your phone all in one shot. The directions are super easy, just follow them exactly. I did mine this way, you dont have to mess with clockwork at all, ten minutes total. Let us know how you make out.
Sent from my rooted froyo Fascinate
Click to expand...
Click to collapse
GOT IT!!! thanks so much for the advice...best web site i found for all of the downloads and clearest directions is http://www.droidforums.net/forum/sa...ork-updated-2-11-a.html ....WORKED GREAT!
boorad22 said:
GOT IT!!! thanks so much for the advice...best web site i found for all of the downloads and clearest directions is http://www.droidforums.net/forum/sa...vd
midnight 1.1 theme
btw, this was 8pen-ed.
Click to expand...
Click to collapse
Hi all,
I've just got my new i5800L, and I've already rooted it with z4root. Here are my qs:
What's all that of XXJPM and all that stuff? Which one should I use for mine? (actual one is I5800LVIJG7 (Eclair)).
Is there any way of doing a nandroid (full copy of the actual rom which can be flashed easily) so if I mess things up or want to get back to Eclair I'd just have to flash it back?
I guess that's all by now. Thank's in advance.
JPM is the latest froyo rom...you cant backup ur whole rom as if nw we dont have any alternative for this...check flashing guide in sticky and see vdos on youtube. ...happy flashing...
Sent from my GT-I5800 using XDA App
Thanks..
I've downloaded 2 files (2 diferent versions). One was a zip file with 3 files inside and the other one was a rar file with 4 .tar.md5 files. The zip i don't know how to apply it because odin will only take .tar or md5 files and in the other one I don't know what to do with all the .tar.md5 files. What should I do? :S
moikop said:
Thanks..
I've downloaded 2 files (2 diferent versions). One was a zip file with 3 files inside and the other one was a rar file with 4 .tar.md5 files. The zip i don't know how to apply it because odin will only take .tar or md5 files and in the other one I don't know what to do with all the .tar.md5 files. What should I do? :S
Click to expand...
Click to collapse
Take a look at rudolf895 youtube channel
http://www.youtube.com/rudolf895
All you need to know is on his Videos
Hope this helps
Thanks, now it's booting (on the samsung screen). I think it worked. But now it's "orangeized" XD. I'll keep looking for the right tar XD
PD: is it ok if it takes a while on the "samsung" (the one with the glow, after the GT-I5800l screen) screen? cause it's past a few minutes and still on that screen and I'm starting to panic XD
EDIT: It's been more that 15 minutes since it's stuck at that screen. What should I do? Please, second day with it and already screw it XD
Flash the JPM firmware...you shud get it as a tar package...a single file...
but sometimes u will have 4 files
1. bootloader
2. pda
3. csc
4. phone
dont ever flash the bootloader file in odin with pda csc n phone tar files...because the risk of bricking goes high...
just flash the 3 remainin files...n when ur fone has booted...just do a hard reset
katkoriaarpan said:
Flash the JPM firmware...you shud get it as a tar package...a single file...
but sometimes u will have 4 files
1. bootloader
2. pda
3. csc
4. phone
dont ever flash the bootloader file in odin with pda csc n phone tar files...because the risk of bricking goes high...
just flash the 3 remainin files...n when ur fone has booted...just do a hard reset
Click to expand...
Click to collapse
Great, now it works again! Thank you a lot. And now I finally understand how odin works :-D
which custom rom do you guys recomend?
Don't forget the i5800L is different from the i5800, but the only difference is the 3G antenna frequency. If you install JPM you MIGHT have 3G connection problems, or then again you might not. You MOST LIKELY will see a battery life decrease because of this issue. If you want really badly to have Froyo (android 2.2) you can flash a JPM ROM. If you want your battery to last a couple of days, either wait for an american release of froyo, or keep your Eclair version.
I have a i5800L from VIVO, originally with JG7 as well. When I installed JPF (previous froyo release) I had issues with the 3G network, when I flashed Kyrillos custom JPM ROM i also had problems. When I flashed Lestatious custom JPF ROM I didn't have problems, and when I flashed clean JPM i didn't have problems either.
So really, its a question of luck.. although let me tell you, my battery lasted way way longer on the original JG7 firmware than any other release (including the JK1 Eclair, said to be the best Eclair released before froyo).
Remember though, if flashing separately (not as one package), avoid flashing the BOOT file or BOOTLOADER. Flashing this increases the chance of bricking your phone. Not flashing it decreases the change by 1000000000000 times.
IonAphis said:
You MOST LIKELY will see a battery life decrease because of this issue. If you want really badly to have Froyo (android 2.2) you can flash a JPM ROM. If you want your battery to last a couple of days, either wait for an american release of froyo, or keep your Eclair version.
Click to expand...
Click to collapse
Yeah, I can see that. I'm with Kryllos v3.3 and the battery only lasts like about 16 hours :S. I guess I'll go back to I5800LVIJG7 (The one which it came with).
IonAphis said:
Remember though, if flashing separately (not as one package), avoid flashing the BOOT file or BOOTLOADER. Flashing this increases the chance of bricking your phone. Not flashing it decreases the change by 1000000000000 times.
Click to expand...
Click to collapse
About that, if I flash the bootloader (with all the others too, of course), and it upgrades ok, then there's no problem, right? I mean, if I try to downgrade again, it'll work fine? (Yes, before I read the comment telling me not to flash the bootloader, I did it and it was successfull. But now I don't know if it'd make it fail when I'll downgrade to I5800LVIJG7 :S)
It's not about upgrading or downgrading. When you flash, pratically all the memory on your phone gets erased, which means you can upgrade or downgrade at will with no problems.
The problem is, when you flash a bootloader, and say, for example, you have a power outage, or your computer decides to give more resources to your MSN or winamp you have running on the background (or whatever else), or even there is a problem with your cable connection or a spike in power, or whatever other mishap that can occur, the bootloader might not be able to transfer successfully. If that happens, you won't be able to boot your phone. If you flash everything except the bootloader and something happens, you will be able to at least go back into download mode and reflash the files needed.
Basically the bootloader tells your phone to start. If that gets corrupted, it simply won't. If you avoid flashing this and even if the transfer gets corrupted, you can always do the process again by going into download mode (which is installed along with the bootloader)
Great, thank you so much
moikop said:
Great, thank you so much
Click to expand...
Click to collapse
So when you were running on Kyrillos' ROM, did you have any connections problems with the 3G band?? thank you for your answer
fedee13 said:
So when you were running on Kyrillos' ROM, did you have any connections problems with the 3G band?? thank you for your answer
Click to expand...
Click to collapse
No, I haven't. I'm now in Kyrillos v5.7 and it goes great (battery consumption, performance, etc)
Remember to backup your IMEI so we may have one less "help my imie is 000000000" thread.
Sent from my GT-I5800 using XDA App
moikop said:
No, I haven't. I'm now in Kyrillos v5.7 and it goes great (battery consumption, performance, etc)
Click to expand...
Click to collapse
Fantastic! thank you very much Now it's time to learn how to do it haha
dilzo said:
Remember to backup your IMEI so we may have one less "help my imie is 000000000" thread.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
How do i do that??
fedee13 said:
Fantastic! thank you very much Now it's time to learn how to do it haha
How do i do that??
Click to expand...
Click to collapse
Go to terminal emulator and type this..
su
dd if=/dev/block/stl4 of=/sdcard/efs.rfs
Wait for few seconds. Then copy efs.rfs from sdcard to pc and keep it safe.
arunmcops said:
Go to terminal emulator and type this..
su
dd if=/dev/block/stl4 of=/sdcard/efs.rfs
Wait for few seconds. Then copy efs.rfs from sdcard to pc and keep it safe.
Click to expand...
Click to collapse
I'm sorry but where I find this "terminal emulator", I'm new at this.
Thanks in advance!
fedee13 said:
I'm sorry but where I find this "terminal emulator", I'm new at this.
Thanks in advance!
Click to expand...
Click to collapse
Market dude......
I'm about to just flash my phone for the first time. can someone please help me with the following?
i have an i5801 and i want to keep it that way after flashing. so i just need to delete boot.bin and sbl.bin right?
does deleting these two files also ensure that i don't hard brick my phone?
can someone give me a link to download indroid 4.3? (that is the best version of indroid, right?)
what is the ops file? where can i download that from?
and what is this "package" that i need to download?
and last, how do i clear the cache?
btw, these are questions for the steps given in http://forum.xda-developers.com/showthread.php?t=873645
Mohit12 said:
I'm about to just flash my phone for the first time. can someone please help me with the following?
i have an i5801 and i want to keep it that way after flashing. so i just need to delete boot.bin and sbl.bin right?
does deleting these two files also ensure that i don't hard brick my phone?
can someone give me a link to download indroid 4.3? (that is the best version of indroid, right?)
what is the ops file? where can i download that from?
and what is this "package" that i need to download?
and last, how do i clear the cache?
btw, these are questions for the steps given in http://forum.xda-developers.com/showthread.php?t=873645
Click to expand...
Click to collapse
Firstly flash Indroid 4.1 :
Link To Indroid 4.1 [Part 1]
Link To Indroid 4.1 [Part 2]
Once the download is complete, extract using WinRAR/7Zip. The 'package' is the .tar file you find inside. Flash it as 'One-Package' using Odin.
Here is the link to the OPS File :
OPS File
How to Wipe Cache :
After flashing 4.1, reboot into Recovery by pressing and holding Volume Up + Volume Down + Menu Button + Power Key. The phone will boot into CWM. Scroll down (using the volume keys) and select (using the menu key) the option that says : "Wipe Cache". Ignore error messages (if any). Click on Reboot System.
From what I see, Indroid 4.3 is an update.zip file. Which means, you need to have CWM already installed. After installing 4.1, download 4.3.
Download Link for Indroid 4.3
Now follow these instructions :
rudolf895 said:
Instructions to install the Update.zip:-
Put the Zip file into SD card(dont extract)
Do not re-name the .zip file.
Get into recovery.
Using Volume Keys navigate to "Install zip from sdcard"
Choose zip from sdcard.
Navigate to the file you copied to sd card.
Hit home key when selected
Select yes.
Wait for the update.zip to install and finish
Then hit reboot system 26 now
And your should be done.
Click to expand...
Click to collapse
You should have Indroid 4.3 up and running in your device now
I know it sounds tedious. But believe me, it isn't that hard
DUDE! THANKS A GAZILLION!
REALLY appreciate it. *pushes thanks button*
oh ya, about the boot.bin and sbl.bin
do i delete them to retain my i5801 boot screen? or to make sure my phone doesn't get hard bricked? or both?
so if i delete them, there is NO WAY how i can ruin my phone?
sorry for being so cautious but it's my first time flashing, and i kind of lost my bill. so my phone is out of warranty. and if it does get hard bricked, that'll be bloody expensive.
thanks for the earlier post though.
Mohit12 said:
oh ya, about the boot.bin and sbl.bin
do i delete them to retain my i5801 boot screen? or to make sure my phone doesn't get hard bricked? or both?
so if i delete them, there is NO WAY how i can ruin my phone?
sorry for being so cautious but it's my first time flashing, and i kind of lost my bill. so my phone is out of warranty. and if it does get hard bricked, that'll be bloody expensive.
thanks for the earlier post though.
Click to expand...
Click to collapse
Yes. If you delete boot.bin and sbl.bin, you will retain your I5801 bootscreen and you ll not get your phone hardbricked. You can manually delete them or stock firmwares without boot.bin and sbl.bin are available here in XDA. Check the development section.
k, thanks. last question : according to http://forum.xda-developers.com/showthread.php?t=873645
in step 4, it says :
"4) Check protect ops checkbox (Don’t check this if you are flashing I5801 with I5800 firmware for the first time.)"
i'm using an i5801, and i want to flash InDroid. but is InDroid i5800 or i5801 firmware? so should i check the box or no?
answer this and i'll be able to FINALLY flash my phone.
like i said, sorry to be so cautious over even petty details but if something goes wrong, i'm screwed because i lost my bill so i'm pretty much out of warranty (also, because i rooted my phone, so the bill doesn't matter).
Mohit12 said:
k, thanks. last question : according to http://forum.xda-developers.com/showthread.php?t=873645
in step 4, it says :
"4) Check protect ops checkbox (Don’t check this if you are flashing I5801 with I5800 firmware for the first time.)"
i'm using an i5801, and i want to flash InDroid. but is InDroid i5800 or i5801 firmware? so should i check the box or no?
answer this and i'll be able to FINALLY flash my phone.
like i said, sorry to be so cautious over even petty details but if something goes wrong, i'm screwed because i lost my bill so i'm pretty much out of warranty (also, because i rooted my phone, so the bill doesn't matter).
Click to expand...
Click to collapse
Yes, check this box
It is possible to flash indroid ddjp4 rom...!?
Raunak44 said:
It is possible to flash indroid ddjp4 rom...!?
Click to expand...
Click to collapse
Its based on the updated firmware for India (DDJP4). Swype and Camera bugs fixed.
And yes, you can definitely flash it!
Okay, dude. sorry to bring up this post again but i had (yet another) internet-not-working-days. Anyway, i downloaded the two Indroid 4.1 parts and they're 001 and 002 files. WinRAR says it might be broken or damaged, or it doesn't recognise it. Also, I can't seem to download the 4.3 update. Is there any other site where it is hosted?
And I currently use DDJP2, but everywhere on the forum people use JPM or now DDJP4. I can flash Indroid, or any custom ROM no matter what stock firmware i'm using right? Or does that also matter?
Mohit12 said:
Okay, dude. sorry to bring up this post again but i had (yet another) internet-not-working-days. Anyway, i downloaded the two Indroid 4.1 parts and they're 001 and 002 files. WinRAR says it might be broken or damaged, or it doesn't recognise it. Also, I can't seem to download the 4.3 update. Is there any other site where it is hosted?
And I currently use DDJP2, but everywhere on the forum people use JPM or now DDJP4. I can flash Indroid, or any custom ROM no matter what stock firmware i'm using right? Or does that also matter?
Click to expand...
Click to collapse
No problemo.
Download HJSplit and use it to join the split archives (InDroid 4.1 CWM Clean.7z.001 and InDroid 4.1 CWM Clean.7z.002).
Or, try this Torrent Link. Might be slow, but its bound to work!
And yes, you can flash whichever ROM you wan't. Hell, I didn't even know which firmware I was on the first time I flashed a Custom ROM!
Incase you just can't download the InDroid package, move on to Kyrillos' ROM. Its equally good.
Good luck
Hi, I was following this guide http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide found on http://forum.xda-developers.com/showthread.php?t=1298691.
I got as far as the Installing the ClockworkMod Recovery, when I got to step 8 'Click Start on the Heimdall Frontend. A blue transfer bar will appear on the phone showing the kernel being transferred. The device will reboot automatically.' BUT when the phone tried to reboot it gets stuck on the first Galaxy S screen. I could get in to download mode and recovery mode but nothing else. Does this mean my mobile is bricked? What do I do know?
Thanks in advance
You have flashed a rom, not only root your device. And cyanogenmod is not based on samsung firmware.
Think you shold read some more.
But, how long do you wait on the s logo? It thakes some time to boot up first time when catche is wiped.
If you only want to root you shold search for cf root for your stock rom. If you want to go back, you have to download a stock rom. Found att samfirmware.com
Sent from my GT-I9000 using Tapatalk
No not bricked (nowhere near)............ Reflash...
I have read many times that re-flashing will do the trick. If you have download mode, you can flash any rom onto it, i would use odin as it may be the safest whilst you being in limbo. Then if you want to follow a link for CM 7.1 that is both v.entertaining (my opinion) and clear i suggest you click on the link in my sig...
Robert - Sorry I did mean flash as well as root. I waited around 15-20 minutes, isnt that long enough?
Talon - I have tried to re-flash using the guide method I was originally using but get the same problem. To be honest from looking at Odin information on this forum, it has confused me quite a bit (lot of different advice), not sure if I am doing the right thing.
I did make the mistake of jumping into trying to flash & root my phone. Any help of what to do to get my phone to a working state, would be very much appreciated.
@OP: as long as you can put phone in Download mode - it is not bricked.
ALWAYS, you can restore everything by flashing stock ROM with repartition.
If you will not be able to go to download mode - well... then you have something to worry about
spamtrash said:
@OP: as long as you can put phone in Download mode - it is not bricked.
ALWAYS, you can restore everything by flashing stock ROM with repartition.
If you will not be able to go to download mode - well... then you have something to worry about
Click to expand...
Click to collapse
I'm a bit confused, what would be the best way to do that?
Well find stock FW from below, then flash it using the guides..
Generally now days you get 2 files, Pit either 512 513 or 813 (or something similar). And you get a .tar file or other zip type extension and put that in pda. Then flash
you may get 3 files and a pit file in which case you put it in the appropriate places....
Ive written this guide and telling you it is a GUIDE. Wherever you get your files from there should be instructions as to what to do.
For example you may need to do a factory reset before (unlikely but still) More likely is that you will have to disable lagfix, but you shoudnt have to worry about that. Main thing read the guide and follow the guide from where you get the files. The thread you get it from...read the first and last 5 pages, more if you want to be safe.
Now files, i have links to stock FW below, guide are usually present within them. If not read the thread, but also read the thread and search th thread for answers or the section or the SGS forum.
IF before you were on 2.2.x - try some Froyo from sammfirmware. If you were on Ginger - try Click
Of course, you can search for EAzyBase... but it is more advanced, start from the basics...
OMG, there are tons of tutorials and how to's in here about flashing and rooting phones... who uses heimdall? get Odin for flashing:
1. Install KIES for drivers (you might already have done this).
2. Get a rom from samfirmware/sammobile, I recommend JVP because it has gingerbread bootloaders: http://www.sammobile.com/threads/17-Samsung-I9000-Galaxy-S-Firmwares
3. Get Odin (sorry I coudn't find a link)
4. Get your phone in download mode (VolDown, Home, Power).
5. Connect your phone to PC with USB cable.
6. Set the PDA, CSC and MODEM files in Odin from the firmware you downloaded from step2.
7. Make sure you have "re-partition" enabled and set the .PIT file to use the *512.pit also included in the firmware from step 2.
8. click start.
9. Start your phone and set up the startup wizard.
9. For rooting, get the CF-root for your firmware from here: http://forum.xda-developers.com/showthread.php?t=788108
10. Get your phone into download again.
11. DON'T check repartition in odin, only select the CF-Root file as PDA (you have to use the CF-Root-***.TAR, important to use .TAR and not .ZIP.
12. Flash again, now you are rooted!!
Hello all
So I have been doing some flashing and I wanted to restore to the original stock ROM that I made a backup of (via TWRP) right after I rooted my device using the Casual tool in the dev forum but I had a question just to make sure I don't botch anything before I go for the restore:
I am coming from CleanROM 1.5 the MF3 based ROM -- I'm assuming the ROM didn't touch the bootloader
1) I performed an Odin recovery of the I337UCUAMDB baseband version of the OS (factory) from the Dev Forum
2) My original backup was of the I337UCUAMDL baseband version -- Am I able to perform a TWRP restore without causing any problems here?
3) Do I have do Loki-Doki after I restore?
I would try this myself but I really don't want to risk a hard brick in case this isn't the correct way - thanks for the advice in advance all.
An Alternative to this would be to obtain the Odin PDA file for the I337UCUAMDL baseband firmware which I have been unable to locate
Alright well I just went ahead with the restore and The baseband version stayed the same despite the fact that the backup was originally from the MDL baseband. Is there anywhere I can download the Odin file to flash the MDL firmware?
No one's helped me with my problem, so might as well help you out lol! Here's a link for MDL http://storagecow.eu/Xda/AT&T S4/St...s.com-SGH-I337-ATT-I337UCUAMDL-1367050591.zip Flash with Odin
I just did some digging around and actually found this awesome website and I am downloading the MDL right now
http://www.sammobile.com/firmwares/1/?model=SGH-I337&pcode=0#firmware
I do believe that this is legitimate - if not someone please correct me. Have 2 hours until the download is finished anyways lol
TheEmpyre said:
I just did some digging around and actually found this awesome website and I am downloading the MDL right now
http://www.sammobile.com/firmwares/1/?model=SGH-I337&pcode=0#firmware
I do believe that this is legitimate - if not someone please correct me. Have 2 hours until the download is finished anyways lol
Click to expand...
Click to collapse
if you guys need help i can walk you through it step by step; PM me and ill give you my skype or cell number. PM'ed you both.
Slade8525 said:
if you guys need help i can walk you through it step by step; PM me and ill give you my skype or cell number. PM'ed you both.
Click to expand...
Click to collapse
Thanks for the offer -- but as long as the steps are essentially the same as Adam's Factory Stock thread in Android Development then I should be alright! I'm assuming that is the case
TheEmpyre said:
Thanks for the offer -- but as long as the steps are essentially the same as Adam's Factory Stock thread in Android Development then I should be alright! I'm assuming that is the case
Click to expand...
Click to collapse
they should be (post a link ill check).via ODIN, install UCUAMDB, then UCUAMDL, root and install custom recovery, and freeze the update processes (i forget what they are called, im looking for them now) with titanium backup so that it does not auto update to MF3.
if you happen to know the process names or find them, please PM me im making a thread about it.
Panagiotis
Slade8525 said:
they should be (post a link ill check).via ODIN, install UCUAMDB, then UCUAMDL, root and install custom recovery, and freeze the update processes (i forget what they are called, im looking for them now) with titanium backup so that it does not auto update to MF3.
if you happen to know the process names or find them, please PM me im making a thread about it.
Panagiotis
Click to expand...
Click to collapse
Yes, Currently have the MDB installed and running, going to enter download mode and flash MDL via ODIN and basically my plan was to freeze the AT&T auto-update checker application - I have frozen it before and I'm guessing that is the first application in the chain that initiates the update. I'll keep ya posted the MDL is still downloading lol
TheEmpyre said:
Yes, Currently have the MDB installed and running, going to enter download mode and flash MDL via ODIN and basically my plan was to freeze the AT&T auto-update checker application - I have frozen it before and I'm guessing that is the first application in the chain that initiates the update. I'll keep ya posted the MDL is still downloading lol
Click to expand...
Click to collapse
When you finish downloading and flash firmware by oding go ahad and root ifno here : http://forum.xda-developers.com/showthread.php?t=2314494 then install GooManager from play store https://play.google.com/store/apps/details?id=com.s0up.goomanager&hl=en open and from menu choose install script. good luck
All of the information in this thread is readily available in the stickies located in the "General" section. Looking at those threads might save you a lot of time, some potential problems down the road, and help from making mistakes that have already been mentioned. Good luck.
The firmware from (http://www.sammobile.com/firmwares/1/?model=SGH-I337&pcode=0#firmware) was spot on. Used Odin to restore. Already re-rooted and froze a few of the update apps. Thanks all for the help, added [Solved] and altered the title to help guide searches