Related
Where do i find it?
Searched for a long time
Why do you need it?
You can't get it on it's own, you need to flash a stock ROM using the SD card method to get the stock SPL on. If you turn off your phone, hold down the vol down button and turn it on you go into the bootloader - what SPL version is listed in there?
(to get out of the bootloader, take the battery out for 5 seconds and put it back in)
my spl: 1.66.0000
i have updated my hd2 rom once (original update).
You'll need to get a 1.48 ROM and flash back to that using the sd card method to get back to SPL 1.42. Then you can put HSPL on the phone and upgrade again using the activesync method and you'll be ok.
You can get the 1.48 ROM here, just put in your serial number:
http://www.htc.com/nl/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Then follow these notes:
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. Therefore if you flash a v2.01 or later Rom (with SPL2.*) you will NOT be able to reinstall HardSPL onto your device and could end up bricking it. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Wiki and Sticky....
Hey There,
Look to the WIKI and STICKY
All you need is there.... yeah with a real video for beginners...
Grtz,
PS MOD close this....
thnx i know how to get it done now!
Thank you EddyOS, i will also try this since i get "invalid vendor ID" when doing it via USB cable. Hope it works
EDIT: Dang, didnt work "Loading ... Not Allow" + back to bootloader
Help
Hi,
I need to find SPL 1.42.0000 for my leo, swedish.
The link in the previous post didnt work for my SerialNo =(
you can't get just the SPL - you need to flash the stock ROM for your region.
and the link wouldn't work as it was the Dutch HTC site - try here:
http://www.htc.com/se/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
Taken from my Rom Flashing guide:
2. FLASH HARDSPL2 (REQUIRED!! DO THIS BEFORE ANYTHING ELSE)
The Original HardSPL Thread is *HERE*
IMPORTANT: To install/uninstall this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000, SPL 1.42.HSPL, SPL 1.62.0000, SPL 1.66.0000, SPL 1.66.HSPL,
SPL 2.07.0000, SPL 2.08.0000 SPL, 2.08.HSPL
NOTE: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first
NOTE: Turn OFF any AntiVirus Program first as it WILL interefere with the flash (there is NO harmful code in the program)
Flashing via ActiveSync with USB Lead (thanks to Bepe)
1. Download HardSPL package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL2_RUN.exe from your pc and read all the text carefully
4. When finished click next in the HardSPL program
5. The program will now check the usb connection and enter the bootloader screen (tri colour)
6. NEW: YOU CAN NOW CHOOSE WHICH VERSION OF SPL OR HARDSPL YOU WANT TO FLASH TO YOUR PHONE!!
7. Select your desired HardSPL and click NEXT.
8. HardSPL will now be flashed to your phone.
5. When its finished the HardSPL program will pop up a box saying "successfully Done".
6. Click ok to terminate program and reboot the phone.
7. Congrats, you just flashed HardSPL.
EddyOS said:
you can't get just the SPL - you need to flash the stock ROM for your region.
and the link wouldn't work as it was the Dutch HTC site - try here:
http://www.htc.com/se/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
Click to expand...
Click to collapse
You can flash just the SPL now
Mark.
Spl 1.42.0000000000
Could someone Just send us the link to where this stupid SPL 1.42.00000 that everyone needs for it to work is? We can't find it anywhere????
Where is it?
We not how to load it we need the file!!!!
[email protected] said:
Could someone Just send us the link to where this stupid SPL 1.42.00000 that everyone needs for it to work is? We can't find it anywhere????
Where is it?
We not how to load it we need the file!!!!
Click to expand...
Click to collapse
you are showing your ignorance by getting all demanding, if you had read anything, you would know that spl is part of all official roms.it is not a file in its own right.
the only reason you would be looking for it is if you have a telstra, cos hspl2 works on any spl. in which case you need the 1.49 telstra rom, flash it from sd card and it will downgrade your spl to 1.42
if you don't have a telstra, then you are looking for something you don't need.
i cannot seem to flash my phone! D: it's irritating me greatly...
allow me to tap out my phone for you.
rgb screen:
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
i can't flash roms till it's hspl-ed.
hspl2 says i have a bad model number?
i have the US TMO HD2, 512 rom, not 1gb rom.
pretty sure it's only 512, cause with OS running, i check about system, it says i have 4hundred and something avail.
i've tried everything.
i can't even locate a copy of 1.66 rom so i can install 1.42 spl, cause htc says my model number isn't suitable for the rom i try to download.
basically, i'm F%$KED. and i need helps.
please, respond! i just wanna hack this POS winmo 6.5 shiz to something cooler.. D:
ijoshv2 said:
i cannot seem to flash my phone! D: it's irritating me greatly...
allow me to tap out my phone for you.
rgb screen:
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
i can't flash roms till it's hspl-ed.
hspl2 says i have a bad model number?
i have the US TMO HD2, 512 rom, not 1gb rom.
pretty sure it's only 512, cause with OS running, i check about system, it says i have 4hundred and something avail.
i've tried everything.
i can't even locate a copy of 1.66 rom so i can install 1.42 spl, cause htc says my model number isn't suitable for the rom i try to download.
basically, i'm F%$KED. and i need helps.
please, respond! i just wanna hack this POS winmo 6.5 shiz to something cooler.. D:
Click to expand...
Click to collapse
Maybe this posting here will help you to get answers to your questions...
htc hd 2
is not working for mi my freind , it just get the color on the phone and them the program say error , can you help me my SPL-2.08.0000
walasquin55 said:
is not working for mi my freind , it just get the color on the phone and them the program say error , can you help me my SPL-2.08.0000
Click to expand...
Click to collapse
do you have a tmous phone? in which case you need hspl1024 (see my sig)
if not, try different usb ports, especially try to use one around teh back of the computer
also, dont forget to right click hspl and 'run as administrator'
nO it does not work that way!
Would be a lot easyer if you just gave us the file 1.42.0000.nbh so we could add it to our SDcard and flash it without it locking or not working! Please I beg you send us over the 1.422.0000 file all by itself!
PLEASE!!!!
tictac0566 said:
Maybe this posting here will help you to get answers to your questions...
Click to expand...
Click to collapse
I have the same problem and so does everyone else, they no the files don't work and they won;'t give us the EXACT 1.42.0000.nbh file so we can SD card flash it!
It would be so simple!!!!!!
ok then
samsamuel said:
you are showing your ignorance by getting all demanding, if you had read anything, you would know that spl is part of all official roms.it is not a file in its own right.
the only reason you would be looking for it is if you have a telstra, cos hspl2 works on any spl. in which case you need the 1.49 telstra rom, flash it from sd card and it will downgrade your spl to 1.42
if you don't have a telstra, then you are looking for something you don't need.
Click to expand...
Click to collapse
How come someone sent over a SPL 2.08.0000 which mine used to be 2.10.0000 and that worked just fine, why wouldn't sending over a file 1.42.0000 just like they did with the 2.08.0000 do the same... IT WOULD!
i flash 2.13 oficial rom from microsd, now i am stuck with spl 2.10
cant change rom
i have a micro sd 8gb from toshiba, made a gold card, buth without any luck.
i tried to flash 2.10.0 to restore spl 2.8
00028002
not alowed
i have hd2 euro version, its loched to orange romania @cidrang008 0
help mi please!!!!
You can't down grade. Just use SSPL to flash other roms... Ur SPL and Radio a.t.m. are stuck!
the problem ts other
my phone its stuck in software update fail screen
darckreign1984 said:
my phone its stuck in software update fail screen
Click to expand...
Click to collapse
Now you need a goldcard.
!!!
solved
need 100% battery if you have gold card to flash rom (this its for error 00028002)
Hi,
after a bad flash on my HD2, i'm blocked on the screen with the 4 colors (red,green,blue,white)....
with these indications :
HX-BC
SPL-1.42.HSPL XE
MicroP-Wrong Platfrom (0x0)
CotullaHSPL 0x30
what i can do ?
Have you tried redoing the HSPL?
how to proceed ?
You need to make sure that you are using the correct HSPL for the ROM you are flashing.
Flash the correct HSPL, then flash the required Radio ROM (if it is a custom ROM) and then finally flash the main ROM.
The stock (HTC and operator specific) ROMs include SPL and Radio ROM as one complete package.
i just try to flash with the last HTC rom, with the SD card...
i have again a problem.
now this is the indication when i boot :
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Upgrade ROM code again, please try again
what is the good HSPL for HTC rom ?
5tef said:
i just try to flash with the last HTC rom, with the SD card...
i have again a problem.
now this is the indication when i boot :
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Upgrade ROM code again, please try again
Click to expand...
Click to collapse
Is your HD2 a T-Mobile USA version?
no (thanks for your help) , it's a french version.
actually, i donwload an old HTC ROM, to change SPL3.03 to older one... then i think i need to put an old HSPL ??
5tef said:
no (thanks for your help) , it's a french version.
actually, i donwload an old HTC ROM, to change SPL3.03 to older one... then i think i need to put an old HSPL ??
Click to expand...
Click to collapse
What are your intense / what do you will to do?
PS do you have a branded device? Orange, SFR, Brique Télécom..?
it's a french version , from SFR.
my last ROM (who work good, was chucky ROM ).
actually, i try to change the SPL for an older one, using a old HTC rom on SD card boot.... it dont work, i have the message "not allow".
i would like to install the last HTC official ROM.
5tef said:
it's a french version , from SFR.
my last ROM (who work good, was chucky ROM ).
actually, i try to change the SPL for an older one, using a old HTC rom on SD card boot.... it dont work, i have the message "not allow".
Click to expand...
Click to collapse
Yeah, I see it. But if I understand you correctly you have a branded SFR rom, and you forcet your device to install Stock rom 3.14 (who isn't fore branded device) on your device?
If this is the case; it will not be easy.
First go back to download the official stock rom 1.47 for your branded SFR device.
Place your device in bootlouder mode, connect your device to PC, (you will see at the button first "serial" than "USB".
When it's set on USB, right click on your "RUU_Leo_HTC_FR_1.47.xxx.x" select run as administrator. PS; I advice you to disable your Antivirus fore a while.
5tef said:
i would like to install the last HTC official ROM.
Click to expand...
Click to collapse
You can't install Stock rom 3.14 on a SFR branded device!! There isn't a stock rom update (3.14) jet available based on a branded SFR device!!!
yes i know, but i have already make it before, with an old HTC ROM.
it worked good. (i was with Coachella HSPL)...
i would like now to put an OLD SPL because i can't do anything with SPL 3.03..
i think i need to come back to an old HSPL too, but how ?
i can't use activesync... i have only the red,green,blue,with screen on HD2.
5tef said:
yes i know, but i have already make it before, with an old HTC ROM.
it worked good. (i was with Coachella HSPL)...
i would like now to put an OLD SPL because i can't do anything with SPL 3.03..
i think i need to come back to an old HSPL too, but how ?
i can't use activesync... i have only the red,green,blue,with screen on HD2.
Click to expand...
Click to collapse
First go back to download the official stock rom 1.47 for your branded SFR device.
Extract the "RUU_signed.nbh" > rename it to "leoimg.nbh"
Format your SD with fat32 > copy the "leoimg.nbh" to SD card > Reset the device while pressing the volume down button and follow the instructions.
(Use this time the official stock rom who is fore your device; download it from the HTC website by using your S/N)
i can't because my SPL is 3.03.0000
i need to install an older SPL, but how ?
5tef said:
i can't because my SPL is 3.03.0000
i need to install an older SPL, but how ?
Click to expand...
Click to collapse
The only way I know is by installing a previous Stock rom sir!
i just try it, with a old ROM..... it not work. i have the message " 0028002 not allow" just after the "loading" message...
5tef said:
i just try it, with a old ROM..... it not work. i have the message " 0028002 not allow" just after the "loading" message...
Click to expand...
Click to collapse
Bay flashing over active sync ore over SD?
only with SD card (2Go) , i can't use activesync... ( my HD2 have only the boot screen with red,green,blue, white colors)
hello ... uhm, i was ... what i was!? ... well, i tried to return my phone from hspl to ospl version, i flashed magldr and android to windows stock rom, but, when i tryed to flash it from hspl to spl i did this :
- Extracked 'Ruu.signed.nbh' and changed it name to 'leoimg.nbh' than i copied it to my sd card and then i tryed to hard reset my phone ...
- The loading screan was activated and tryed to update something, but then it crashes and now i cant do anything .... i can't flash anyrom, any spl, any bootloader ... it always says that 'Software wasn't updated' (or something like that) .... it seams like its locked ...
so, pls, help me to fix this thing.... thx XDA gods ^_^
We know you're worried, but you have given no details at all,, what model hd2, what stock rom you flashed, what spl shows in bootloader(don't assume you know, check it visually again now) what exactly "the loading screen started..... crashed...blah blah" actually means.
Details details details.
oh god, how rude of me ... well, im useing htc leo hd2 t8585 and i have stock rom windows mobile 6.5 //3.14.405.2// now, but before that i had android 2.3.7 gingerbread 1.1.3 magldr and 2.08 hspl ... i sucessfully removed android and magldr but hspl remains the same .... than, i tried to remove hspl with ospl and when i try to hard reset my phone i see loading screen of ospl but then it pops 'Not allowed' screen .... like its locked or something .... and when i try to boot my phone it stucks again there and redirect me to HSPL picture (u know those colors) and pops the message 'rom update is not finished, try again later ' ... i know it sounds ****ed up
Run Hspl4 with phone in bootloader, choose 3.03.0000, flash stock rom again. If you still get errors you aren't using the correct stock rom for your region/provider.
to remove hspl download hspl2 and flash the 1.42.0000spl !!
now try to flash a stock rom !!
aaki_rocker said:
to remove hspl download hspl2 and flash the 1.42.0000spl !!
now try to flash a stock rom !!
Click to expand...
Click to collapse
That's dangerous advice without checking if its deff not a tmous. LOADS of tmouses have been bricked by the owner trying to get to spl 1.x
Just cos he said its a t8585, it wouldn't be the first time a tmous user has referred to it as an 8585
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the power down button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install the rom or the spl...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way..
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
The nrg screen shouldn't be a problem, but spl 2.x will definitely be refused, since spl 2.x is only for t mo USA hd2's.
As for "spl 2.08.0000 and software update failed",, someone tried to flash a non matching rom from SD whilst hspl was installed, result, hspl removed, stock tmous spl installed which then checks your phone vs the rom, finds a mismatch and gives software iupdate failed.
it wont boot because there is no rom to boot, it was wiped at the start of the flash.
Here's what I'd do
First to be sure its really broke (from your description there are a half dozen reasons why it wont start)
Use hspl4 to set spl 3.03.hspl NOT 3.03.0000
flash the wwe 3.14 rom from USB.
Alternatively, to make the phone warranty safe, again set spl 3.03.hspl (or 1.42.hspl or 1.66.hspl,, note that at no time am I using 2.08 or 2.10 spl) flash a stock splashscreen (several threads available)
Then use hspl2 again but this time choose the same spl but ending 0000.
Its the spl that is the real key, people have sent back hd2s with cooked roms and splashscreens, and no problems, but send a regular hd2 back with a spl that reads "x.xx.hspl " or any spl/hspl starting 2.x and they will refuse
Just cos it used to have android on doesn't mean a thing, they can't tell.
samsamuel said:
The nrg screen shouldn't be a problem, but spl 2.x will definitely be refused, since spl 2.x is only for t mo USA hd2's.
As for "spl 2.08.0000 and software update failed",, someone tried to flash a non matching rom from SD whilst hspl was installed, result, hspl removed, stock tmous spl installed which then checks your phone vs the rom, finds a mismatch and gives software iupdate failed.
it wont boot because there is no rom to boot, it was wiped at the start of the flash.
Here's what I'd do
First to be sure its really broke (from your description there are a half dozen reasons why it wont start)
Use hspl4 to set spl 3.03.hspl NOT 3.03.0000
flash the wwe 3.14 rom from USB.
Alternatively, to make the phone warranty safe, again set spl 3.03.hspl (or 1.42.hspl or 1.66.hspl,, note that at no time am I using 2.08 or 2.10 spl) flash a stock splashscreen (several threads available)
Then use hspl2 again but this time choose the same spl but ending 0000.
Its the spl that is the real key, people have sent back hd2s with cooked roms and splashscreens, and no problems, but send a regular hd2 back with a spl that reads "x.xx.hspl " or any spl/hspl starting 2.x and they will refuse
Just cos it used to have android on doesn't mean a thing, they can't tell.
Click to expand...
Click to collapse
Okay...
Let me be specific
Thank you for your reply
Now it has successfully flashed the 3.03 hspl...
Now the problem is after that.. when I flash the rom I.e 3.14xxxx pr 2.10xxx it will just start as usual and when it reaches 99%, it gets stuck and then the error box opens up.. after the recovery, the same thing happens over and over again.. these are the original from but I have also tried other roms and they stuck at different %s
Help
Shame, Well, I guess the splashscreen is back to stock now? In which case remove hspl (set it to 1/3.xx.0000) and it will be warranty safe.
I have the same problem ! I have intalled the NRG Rom for HD2 Leo EU and every thing was good it works smooth, by i have download an app form Google Play "Beats Audio" with make somethin wrong with the drivers of DSP and HTC Music so i decide to re install the Rom and i fallow the steps for that i make a partitation for 200mb and then do the other steps...but at the end when i install the NRG Rom and start it for first time it freez on the NRG ENERGIZE logo saying "Please wait..." i wait for 30 min nothing... What can i do ???