Related
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.
I suggest you follow this
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
thank you dear, i will try it today when i get home and i wish it will work
a3r0n1 said:
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.
Click to expand...
Click to collapse
i have 1.42 !!
i cannot sync with the PC, how to flash 2.08 now?
Make sure you have the right hspl and radio.
Sent from my HTC HD2 using XDA App
dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
the problem that i have hspl 1.42
now i cannot sync with the PC, how can i flash hspl 2.08?
Boy, you never read, do you!
go there:
http://forum.xda-developers.com/showthread.php?t=915839
Don't panic, take it easy...
MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.
Doesn't Work
nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
What doesn't work? If OP just takes his time to read and understand all wat d above posters have posted, then he'll surely successfully get android on his device...The steps above have been used by thousands over and over again WITHOUT fail!!!...
Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.
sanroman said:
Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.
Click to expand...
Click to collapse
It's a simple process. If you are getting stuck at white screen the chances are you are not doing one of the first 2 steps as below.
FIRST: You have to install 2.08.HSPL (no other HSPL version and not an spl ending in .0000). Check in bootloader that you have 2.08.hspl NOT 2.08.0000.
SECOND: You have to install a 2.xx.50.xx radio (it has to be a .50 radio and not a .51 radio). Use 2.08.50.xx or higher .50 radio.
THIRD: Install magldr from bootloader by running the romupdateutility file.
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
Have you tried going all the way back to stock winmo rom and starting the whole process again?
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
You posted this above in your previous post already. I was now asking if you have tried going all the way back to the stock winmo rom, ie to return the phone to its original state and then start again from the beginning?
nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
I had the same problem and it worked.....just follow the steps the guys described below and u will succes :-D
LiFE1688 said:
MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.
Click to expand...
Click to collapse
Had similar problem with MAGLDR, had no idea what to do. Found this forum and these instructions. Took some fiddling but finally got it working. THANX SO MUCH!!!
same problem doesnt work
WM6.5 on my HD2 (from T-Mobile europe) has finally bothered me enough to decide to change the rom entirely, to android (NAND). I saw the instructions/video tutorial by techburrow (including the magldr v 1.11) and thought that it wouldn't give me too much troubles.
Before starting, I checked my ROM to see if it was recent enough. I as well installed hspl v 2.08 (as shown after taking battery out/in and using volume down + startbutton, in the rgbw screen).
After that I (think I) successfully installed MAGLDR v 1.11. It showed the comment that my phone was now "hacked".
I then went on to the most important step in the process, actually loading android. In the instructions for DFT_Android is states that:
" For installation you need enter MAGLDR (hold power button during boot)"
I tried getting into bootloader by holding the power button, I tried pressing it once and then holding it. Neither worked, both ended up with the HTC logo screen.
All I can do now is choose between getting the HTC logo and the rgbw screen showing hspl 2.08.
Hard reset also doesn't work, probably because MAGLDR deleted the original rom. Connecting through USB via the rgbw screen doesnt work, the connection is not recognised.
Other thread look similar problem, but haven't helped so far. Only the most recent are about others trying to get the android on NAND with MAGLDR 1.11 and DFT-Android.
HELP? Anybody has any idea on how I can install android any ROM now, how to get into the bootloader, how to use my HD2 again?
Looks like Magldr was not flash into the phone. Reflash magldr.
Sent from my HTC HD2 using XDA App
unfortunately
Thx for the suggestion, xhanay. However, reflashing MAGLDR requires an activesync connection and/or USB connection via HSPL (only way my phone does anything). Cannot get any connection unfortunately. So no reflashing.
Any other suggestions? (reflashing via microSD?)
help!i have the really same problem!thx!
This is what I do:
1. Remove the battery, put it back
2. Hold VolDown key pressed while turn on the phone to enter Bootloader (tricolored screen)
3. Connect it to PC and wait for connection to change to USB
4. Flash radio 2.15.50.14
5. Hold VolDown key pressed after reboot to enter bootloader again.
6. Flash MAGLDR
7. Reboot
8. Hold Power button pressed > Select USB flasher ...
....and flash Android/Windows 7.
If USB connection is not recognized I suggest flashing a stock ROM using SD card.
See instructions here, chapter 3 - Flashing Via MicroSD Card
could just work
Thank you for the quick response. Hopefully I will make it all the way to step 8+ (with android and all apps coming along with it). Otherwise using the stock rom should help. Thx for the link.
Will let you know if it works.
Also post in the right section in the future
All worked. I had to reflash a custom ROM through the rgbw screen (apparently a custom ROM did synchronise via USB even though activesync didnt show anything). Then I reinstalled MAGLDR (which immediately sent me through to the bootlader screen). After I had some issues loading android (had to tag USB on in Activesync connection settings, make the connection, the tag USB off in the connection settings)... Now Android is running as I hoped it would. Great work and thanx to all that helped.
ps: Will try to use the right section next time. No promises that it will then be the right one however.
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
dixieuk101 said:
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
Click to expand...
Click to collapse
you could try .... than just plug-it in using activesync and run HSPL3... do not install it...before installing it will put ur phone in bootloader....than exit HSPL3 keep your phone pluged in and just flash wtever....radio,rom...etc....
OR
Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear
load the hard SPL than magledr than rom it works 100%
Same Problem!!!
Hey i have the same problem. Recently I bought this phone off of craigslist. The phone goes to the DFT screen and its on aMAGDLR v1.11. I tried to reset it but it doesnt go to the multi colored screen. I bought a new micro sd but that didnt work. It also cant connect to my computer. There isnt wrong with the charging port because the light goes on when its connected. PLEASE HELP?! I cant go into bloatloader. Is it bricked?
Hi,
I had used HD2ToolKit4.2.0.1.zip and use Wipe option given in the bottom left.
Regards
my volume key not work and now i cant use the bootloader,please
hey anybody here??????????????
now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
Click to expand...
Click to collapse
did you do this with right order?
http://forum.xda-developers.com/showpost.php?p=27057672&postcount=127
Hi All,
For the past few months I've been running a DFT NAND build of Android. Yesterday, the phone was running extremely slowly with some odd behavior in the Android menus. When I restarted the phone, loading got as far as the DFT splash screen but then nothing else would happen.
I have since used MAGLDR (1.11) to attempt to boot a fresh Android image from SD card but this hasn't worked. Have managed to use the USB Loader to attempt to flash another NAND build (both Android and WP7) but even though the download process completed, this still didn't work and am stuck in MAGLDR now.
Have read through the forums here and have tried most (if not all) of the suggestions, however nothing seems to be working.
Can anyone offer anymore advice?
Thanks,
Kev
As MAGLDR gets removed if you flash a stock winmo rom I suggest you to try that!
Before you install the winmo rom you can also use Task29 to completely wipe the nand.
good luck
Thanks,
I shall give that a try this evening.
Kev
Unfortunately none of the suggestions have worked. I'm unable to flash a stock WM6.5 ROM as the RUU doesn't detect the phone.
The device does show up in Windows as a Microsoft USB Sync device, however.
Task 29 does not work either due to the same problem.
I've attempted to flash a new Android ROM release but when the phone reboots, it gets stuck on the green HTC logo screen and won't proceed any further.
I don't seem to be able to get MAGLDR 1.13 on the phone either, as DAF.exe complains about some "Config load failed" error.
Any other suggestions?
Thanks in advance,
Kev
*sigh*
you need to read up on "how to flash stock rom from sd card". no need for RUU i believe; sd card method involves copying a file extracted from the stock RUU and placing it in the root of your sd card and letting bootloader detect and flash the file. search for a tutorial or see the stickies.
once you've done that, make a special note about the part that says you need to boot into bootloader (hold down volume down + turn on phone + keep holding volume down until a 4-color screen appears). i suspect you are not doing this step, this is why windows, mtty, etc are unable to detect the device.
if you have already done the above, ignore my post
*sigh* too.
I've already tried flashing from the SD card but I have the same problem. I get to a green HTC loading screen and nothing else happens. I just get stuck in a reboot to MAGLDR and try again loop.
I've read through plenty of posts on flashing custom ROM's and troubleshooting but nothing has helped.
I don't get a 4 colour screen when holding down VOL-DOWN and the power button, the phone just goes into MAGLDR.
Kev
Just to add to that, Windows DOES detect the device but the RUU doesn't. Only the DAF applications find and can talk to the device.
follow me
1. is the battery have enough jiuce? what HSPL you use? hope its HSPL3 2.08HSPL
2. bootloader . . . .
Thanks for your post.
Plenty of juice in the battery.
I believe it is HSPL 2.08 (well, whichever allowed me to get Android on the thing in the first place)
Bootloader what?
Kev
getting into boot loader (4-color screen) is the key to the whole flash with sd card method.
keep trying. read on how to enter bootloader.
i can remember a few ways.
DEVICE IS ON
1. if phone is already on, hold down volume down (keep it pressed HARD)...don't let go of it!
2. push the little reset button under the battery cover. don't let go of the volume down button!
3. don't let go of the volume down button until the 4-color screen appears.
DEVICE IS OFF
1. remove the battery. reinsert it after a few seconds.
2. hold down volume down (keep it pressed HARD)...don't let go of it!
3. tap the end call button and don't let go of the volume down button until the 4-color screen appears.
remember, entering bootloader is the key.
EDIT: it is better to ensure you have sufficient battery. however, flashing via bootloader SKIPS the battery level checks.
kevinwebster83 said:
Thanks for your post.
Plenty of juice in the battery.
I believe it is HSPL 2.08 (well, whichever allowed me to get Android on the thing in the first place)
Bootloader what?
Kev
Click to expand...
Click to collapse
in post 4 you noted you tried task 29 but was successful
you are not even familiar with bootloader, ??? makes me wonder
I'm very familiar with a bootloader, your "bootloader..." comment confused me.
Task 29 was unsuccessful. I've read in a number of posts that you can use Task 29 and start from scratch back at the original bootloader (rather than MAGLDR) but this obviously isn't the case.
Holding down the VOL-DOWN key does nothing other than get me to MAGLDR, which is what happens even if I don't hold any keys down.
I fully understand that the key is entering the bootloader, nothing seems to let me get there.
Kev
kevinwebster83 said:
I'm very familiar with a bootloader, your "bootloader..." comment confused me.
Task 29 was unsuccessful. I've read in a number of posts that you can use Task 29 and start from scratch back at the original bootloader (rather than MAGLDR) but this obviously isn't the case.
Holding down the VOL-DOWN key does nothing other than get me to MAGLDR, which is what happens even if I don't hold any keys down.
I fully understand that the key is entering the bootloader, nothing seems to let me get there.
Kev
Click to expand...
Click to collapse
this is how i enter bootloader from magldr
remove battery
reinsert, leave device off
hold and continue to hold volume down
briefly press power/call button
now your in bootloader
this will show your hspl
Battery removed
VOL-DOWN held
Powered on
VOL-DOWN still held
MAGLDR appears
This isn't my bootloader and doesn't show HSPL
kevinwebster83 said:
Battery removed
VOL-DOWN held
Powered on
VOL-DOWN still held
MAGLDR appears
This isn't my bootloader and doesn't show HSPL
Click to expand...
Click to collapse
if you are now unable to enter bootloader
in this manner, there is only one thing i can think of
you got a bricked device,
you might get some help if you post your querry in the
HSPL thread, or PM cotulla and team
I'm of the same opinion; it is virtually bricked.
The stupid thing is that if I select Android Flasher from MAGLDR, I'm able to flash a different version of Android to NAND but it just won't boot.
Will try a different forum.
Thanks,
Kev
kevinwebster83 said:
I'm of the same opinion; it is virtually bricked.
The stupid thing is that if I select Android Flasher from MAGLDR, I'm able to flash a different version of Android to NAND but it just won't boot.
Will try a different forum.
Thanks,
Kev
Click to expand...
Click to collapse
i discourage you to try another forum
if you got hold of HSPL, task 29 and other stuff here in xda
then this is the best place you can be helped
try to post in HSPL thread
or PM ClydeB1, or bepe.
if they cant help you
then i highly doubt if anyone in this world will
Which HSPL thread would you recommend?
kevinwebster83 said:
Which HSPL thread would you recommend?
Click to expand...
Click to collapse
the original by bepe, cotulla and DFT
I have the same problem...does the HD2 charge itnself in Magldr ?
hi guys i flashed my htc hd2 wm6.5 to nand android rom in 1st 1 week of usage i have no problem and enjoyed the nand android rom in my htc hd2 until one day my hd2 hang and when i reboot my unit it was hang on splash screen only....
i reflashed it using magdlr ver. 1.11 into the same nand rom im using but i have no luck...it still stock on tje android splash screen...what will i do guys?
im planning to flash it to wm6.5 rom,but what will i do?it never boot on tri color screen it only boot on magdlr screen
and how can i flash it wm6.5 rom cook or stock rom i want to revert it back to wm6.5
my hd2 running on gingerbread 2.3.3 nand(V1.8) rom before it malfunction..
Well, my forensic analysis has come up with the following technical and somewhat difficult solution to your present problem: "Click the search button"
Now I know it may sound intimidating, but I tested that feature out for you and came up with this:
http://forum.xda-developers.com/showthread.php?t=905841
matt
Shut down completely your phone (remove batter for 15 sec too)
Place battery back and now hold volume down button.
Still hold volume down button and switch on your phone.
You get 3 color screen.
Now attach your usb cable and connect it to PC
Find on this forum your phone stock win mobile rom (link to officila roms thread)
Run stock win 6.5 rom exe (this is sample name: RUU_Leo_S_HTC_WWE_EastEurope_3.14.479.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe)
Follow instructions on your PC screen. On final your phone reboots.
Enjoy your stock phone.
hi datasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
can i flash wm6.5 rom into magdlr usb flasher?
siapelbo said:
hi dasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
Click to expand...
Click to collapse
Switch off, hold vol down button in and switch on.
As ClydeB1, states you must hold the vol down only and not hold the power button.
siapelbo said:
hi dasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
Click to expand...
Click to collapse
when you get ready to power back on you have to hold volume down and keep holding it while is booting and it should switched to the tricolored screen, plug the usb cable and it should say usb at the bottom when it connects, and if you have hardspl which I know you have after running android, you can use any custom winmo6.5 rom it doesn't have to be an official rom.
can i flash wm6.5 rom into magdlr usb flasher?
No, flash from bootloader.
awts...i cant enter into booloader mode....im so sure what im doing i sure i follow the instructions of you guys....holding down the vol button and switch on
Are you holding it at the bottom of the button and not in the middle or top, ie as if you are turning the volume down?
I don't think you can flash WM6.5 with flasher. You have to restore from recovery screen by remove battery and restore.
ClydeB1 said:
Are you holding it at the bottom of the button and not in the middle or top, ie as if you are turning the volume down?
Click to expand...
Click to collapse
yeah im sure i was holding down the volume botton and switch the power on
Does the vol down button work normally in the Android rom or when moving around in magldr. To be sure, remove the battery and leave it out for 10 minutes then put the battery back, leave the cover off and try again.
I have heard of one or two users who have also had a problem where the vol down button stopped working. If that is the case there is no way back AFAIK.
ClydeB1 said:
Does the vol down button work normally in the Android rom or when moving around in magldr. To be sure, remove the battery and leave it out for 10 minutes then put the battery back, leave the cover off and try again.
I have heard of one or two users who have also had a problem where the vol down button stopped working. If that is the case there is no way back AFAIK.
Click to expand...
Click to collapse
volume botton is perfectly working it work around in magdlr mode actually i flashed my hd2 into android rom right now flashing is done without problems, but its not boot normarly it boot only in splash screen....
can you guys post a link of task 29...i will try this method and flash stock rom
but the main problem is i cant enter into bootloader mode
I use this tool for Task29 - http://forum.xda-developers.com/showthread.php?t=917807
Once you run Task29 though it will wipe the NAND memory and magldr and if you can't get back to bootloader mode then you will be stuck on the splashscreen.
Hi,
I'm also having problems, but in my case the progress bar on my phone when installing the new ROM stops at 0% and will stay there indefinably. On my computer a connection problem will be raised.
The same happens with task29.
I've also tried decompressing ROM Utility, putted leoimg.nbh on my 2GB fat32 formatted sdcard, hold down the volume key.
I will get a new screen with "Loading..." on it, but it freezes there.
So, I have no idea what I'm doing wrong.
Any help will be appreciated.
Regards,
temporary_24 said:
Hi,
I'm also having problems, but in my case the progress bar on my phone when installing the new ROM stops at 0% and will stay there indefinably. On my computer a connection problem will be raised.
The same happens with task29.
I've also tried decompressing ROM Utility, putted leoimg.nbh on my 2GB fat32 formatted sdcard, hold down the volume key.
I will get a new screen with "Loading..." on it, but it freezes there.
So, I have no idea what I'm doing wrong.
Any help will be appreciated.
Regards,
Click to expand...
Click to collapse
Are you sure you still have hspl installed? In bootloader, check your spl version- it should end in hspl.
ClydeB1 said:
Are you sure you still have hspl installed? In bootloader, check your spl version- it should end in hspl.
Click to expand...
Click to collapse
Hi,
Yes. I had one with a 8 on it. I've installed the other, and it worked (or the other way). Thanks.
Regards,
guys my phone revive with a jtag procedure i went to a technician shop here in the phillipines
my phone running in stock rom again...
MY PROBLEM IS:I can't get the HD2 into the bootloader and/or get my PC to recognize the phone via WMDC.
Its just so unresponsive, All its doing is Vibrating constantly/Vibrating patterns/black illuminated screens/ & very rarely, the "Loading please wait" screen with the green android and some other figure I forgot in the bottom right corner. Then on the top it gets stuck on the "aMAGLDR v1.11" and other descriptive words/numbers below it, on the top center.
- INTRO -
Hi, I'm new to XDA-developers forum, and I have 2 non-working HD2's that have been sitting around for quite some time now.
I've recently tried to get it fixed and get into this type of phone modding, as I can see HD2's are very popular for tweaking software's and such.
I have been searching around the web, more so the XDA forums, for answers to my "Special case" (yes I've seen the video when you first sign up for an account on XDA, quite funny ) of a conundrum...
Anyway, 1 HD2 is fully dysfunctional and shows no sign of life (No vibration/lights) but the lower portion of the back does get warm when I try and charge it. I have no hope for this HD2 and I think its only good for spare parts for someone else.
The other HD2 is "somewhat" functional. Sometimes if I get lucky it vibrates continuously or repetitively.
What I know about the half functioning phone:
Let my friend have it, he did some flashing of the ROM, it stopped working after awhile, and then he gave it back to me because he got another phone.
Sometimes after turning it on, it gets suck on the "aMAGLDR v1.11" screen.
I've searched up "MAGLDR" and know that its some kind of custom bootloader or so.
I've searched up how to update it to "MADLDR v1.13" and update the radio and/or use the "RUU-LEO" file.
I have all those files&programs downloaded and ready to go.
Thank you for reading my thread
It would be AWESOME if someone could help me, or even inform me of what has happened with it. If you need further answers about my two HD2's please ask me the questions, I would love to try and answer them!
DavisN said:
MY PROBLEM IS:I can't get the HD2 into the bootloader and/or get my PC to recognize the phone via WMDC.
Its just so unresponsive, All its doing is Vibrating constantly/Vibrating patterns/black illuminated screens/ & very rarely, the "Loading please wait" screen with the green android and some other figure I forgot in the bottom right corner. Then on the top it gets stuck on the "aMAGLDR v1.11" and other descriptive words/numbers below it, on the top center.
- INTRO -
Hi, I'm new to XDA-developers forum, and I have 2 non-working HD2's that have been sitting around for quite some time now.
I've recently tried to get it fixed and get into this type of phone modding, as I can see HD2's are very popular for tweaking software's and such.
I have been searching around the web, more so the XDA forums, for answers to my "Special case" (yes I've seen the video when you first sign up for an account on XDA, quite funny ) of a conundrum...
Anyway, 1 HD2 is fully dysfunctional and shows no sign of life (No vibration/lights) but the lower portion of the back does get warm when I try and charge it. I have no hope for this HD2 and I think its only good for spare parts for someone else.
The other HD2 is "somewhat" functional. Sometimes if I get lucky it vibrates continuously or repetitively.
What I know about the half functioning phone:
Let my friend have it, he did some flashing of the ROM, it stopped working after awhile, and then he gave it back to me because he got another phone.
Sometimes after turning it on, it gets suck on the "aMAGLDR v1.11" screen.
I've searched up "MAGLDR" and know that its some kind of custom bootloader or so.
I've searched up how to update it to "MADLDR v1.13" and update the radio and/or use the "RUU-LEO" file.
I have all those files&programs downloaded and ready to go.
Thank you for reading my thread
It would be AWESOME if someone could help me, or even inform me of what has happened with it. If you need further answers about my two HD2's please ask me the questions, I would love to try and answer them!
Click to expand...
Click to collapse
Those repetitive vibrations on starting are not a good sign(usually it means a non/working CPU/motherboard)!
You should flash a stock ROM and see what happens, but I suspect it won't boot up and you'll get again those vibrations: it worth try it and let me know!
Good luck!
Are you able to get to the tricolored screen by holding the power button and the volume down button? If you can get there, you may be able to task29 it and flash it with a new radio. My guess is someone flashed it with the wrong radio. Once it has the correct radio, if there is no hardware damage, it should work again.
I broke my digitizer . I'll be interested in buying the completely dysfunctional one from ya . Send me a pm if you're interested .
Sent from my HTC HD2 using Tapatalk
joshnchen said:
Are you able to get to the tricolored screen by holding the power button and the volume down button? If you can get there, you may be able to task29 it and flash it with a new radio. My guess is someone flashed it with the wrong radio. Once it has the correct radio, if there is no hardware damage, it should work again.
Click to expand...
Click to collapse
Yes, after I posted this thread, I was able to get into the tricolored screen. After that I tried to update the MAGLDR to V1.13, the screen got into the HTC loading screen with a progress bar stuck at 0% then on the computer it says there has been a communication error.
So my problem now is communication from my HD2 to PC, Which is weird because on the tricolored screen, the text switched to USB and I thought I figured it out, but no...communication error.
I am willing to do Task29 but I'm not aware of the risks or precedures.
Ok first off go to here and download the HD2 NAND Toolkit then install it o. Your computer. Next open the toolkit and then connect your HD2 to your computer via USB. Then use the toolkit to run the Task 29. Be warned though the Task 29 will totally delete the ROM partition of the NAND memory in your HD2 so you will not have a ROM on the device then so it will not boot to anything but the bootloader. Next use the Toolkit to flash either a Window's Mobile ROM, MAGLDR, or clk, you can also use it to flash Clockwork Mod Recovery.
T-Macgnolia said:
Ok first off go to here and download the HD2 NAND Toolkit then install it o. Your computer. Next open the toolkit and then connect your HD2 to your computer via USB. Then use the toolkit to run the Task 29. Be warned though the Task 29 will totally delete the ROM partition of the NAND memory in your HD2 so you will not have a ROM on the device then so it will not boot to anything but the bootloader. Next use the Toolkit to flash either a Window's Mobile ROM, MAGLDR, or clk, you can also use it to flash Clockwork Mod Recovery.
Click to expand...
Click to collapse
Ok, I have gotten the Tool kit but I wasn't able to perform task29.
I got a communication error again, I have tried to do task29 twice.
Here are some screenshots...
HD2
So my problem is still with the communication errors I keep getting if I try to do anything.
Is there anything I can do with the Micro SD card?
DavisN said:
So my problem is still with the communication errors I keep getting if I try to do anything.
Is there anything I can do with the Micro SD card?
Click to expand...
Click to collapse
You can run a Task 29 via SD card. You need to go to here and download the Repack by ShaDrac. Then right click the file and unzip it. Then find the .nbh file and rename it to LEOIMG.nbh and place it on the root of your SD card. Then boot into the bootloader and follow the on screen instructions.
T-Macgnolia said:
You can run a Task 29 via SD card. You need to go to here and download the Repack by ShaDrac. Then right click the file and unzip it. Then find the .nbh file and rename it to LEOIMG.nbh and place it on the root of your SD card. Then boot into the bootloader and follow the on screen instructions.
Click to expand...
Click to collapse
The only thing I need to put on the SC card is the LEOIMG.nbh right
DavisN said:
The only thing I need to put on the SC card is the LEOIMG.nbh right
Click to expand...
Click to collapse
Yeah that is it, just copy the .nbh file and rename it to LEOIMG.nbh. Then copy it to the root of your SD card.
Edit: Once the Task 29 is done your HD2 will only boot to the first splash screen and you will be able to boot into the bootloader also. This is because the Task 29 removed the ROM from your HD2 and you will have to re-flash clk or MAGLDR then a recovery and then a Android ROM. Or you can always flash as Windows Mobile ROM.
T-Macgnolia said:
Yeah that is it, just copy the .nbh file and rename it to LEOIMG.nbh. Then copy it to the root of your SD card.
Edit: Once the Task 29 is done your HD2 will only boot to the first splash screen and you will be able to boot into the bootloader also. This is because the Task 29 removed the ROM from your HD2 and you will have to re-flash clk or MAGLDR then a recovery and then a Android ROM. Or you can always flash as Windows Mobile ROM.
Click to expand...
Click to collapse
Alright, I got into boot loader mode, then it goes onto a completely white screen with "Loading..." on the top.
After 5 minutes or so, the screen turns off with no instructions to follow after "Loading...".
I pressed the power button to see if it still works and goes into the old MAGLDR v1.11 screen with no menus/options.
Am I suppose to keep holding the Vol down button or something, I think im doing it wrong
Edit: I charged the phone before trying it again for a few hours and I think it was on the white "Loading..." screen for the whole charge.
I don't know whats wrong with it :d
DavisN said:
Alright, I got into boot loader mode, then it goes onto a completely white screen with "Loading..." on the top.
After 5 minutes or so, the screen turns off with no instructions to follow after "Loading...".
I pressed the power button to see if it still works and goes into the old MAGLDR v1.11 screen with no menus/options.
Am I suppose to keep holding the Vol down button or something, I think im doing it wrong
Edit: I charged the phone before trying it again for a few hours and I think it was on the white "Loading..." screen for the whole charge.
I don't know whats wrong with it :d
Click to expand...
Click to collapse
First off sorry for the lag in response but I went to sleep not long after I posted my last response last night. If you never saw a box appear on the HD2 screen that asks you if you wanted to install the update and to press the power button to do so, then you did not run the Task 29. I am pretty sure you didn't anyway because you said you could still boot into MAGLDR 1.11 and if you had run the Task 29 then MAGLDR would no longer be on your HD2.
When you boot into the bootloader by holding the volume down button down and powering on the HD2 continue to hold the volume button down until you see searching. When you see searching you can release the volume down button and then you should see the window pop up that ask if you want to install the update and if so to press the power button to continue. Press the power button and the Task 29 will run, you should see a progress bar on the screen of the HD2.
Once the progress bar is done the HD2 should restart, but it will not have a ROM to boot so just pull the battery to turn it back off. Next, if you want to use Android, you need to install MAGLDR 1.13 or clk. You can install either one of these via SD card, just like the Task 29 you will have to copy the .nbh file for the custom bootloader you want to use to the root of your SD card and rename it LEOIMG.nbh. Make sure to remove the LEOIMG.nbh file that you used for the Task 29. Personally I prefer clk cause it makes the HD2 run like a native Android device, but you are having a communication error so this may lead to problems if you use clk as you have to flash Clockwork Mod Recovery via USB when you use clk. You know I would suggest you try a different USB cable as you might just have as faulty USB cable and that is what is causing the communication error. I would highly suggest you do this before trying to do anything at all more with the SD card. If you try another cable and it does not work then your HD2 more than likely has a faulty mini USB port.
If you try another cable and it works you can just use the toolkit to run the Task 29 and then use it to install either MAGLDR 1.13 or clk and then Clockwork Mod Recovery.
T-Macgnolia said:
First off sorry for the lag in response but I went to sleep not long after I posted my last response last night. If you never saw a box appear on the HD2 screen that asks you if you wanted to install the update and to press the power button to do so, then you did not run the Task 29. I am pretty sure you didn't anyway because you said you could still boot into MAGLDR 1.11 and if you had run the Task 29 then MAGLDR would no longer be on your HD2.
When you boot into the bootloader by holding the volume down button down and powering on the HD2 continue to hold the volume button down until you see searching. When you see searching you can release the volume down button and then you should see the window pop up that ask if you want to install the update and if so to press the power button to continue. Press the power button and the Task 29 will run, you should see a progress bar on the screen of the HD2.
Once the progress bar is done the HD2 should restart, but it will not have a ROM to boot so just pull the battery to turn it back off. Next, if you want to use Android, you need to install MAGLDR 1.13 or clk. You can install either one of these via SD card, just like the Task 29 you will have to copy the .nbh file for the custom bootloader you want to use to the root of your SD card and rename it LEOIMG.nbh. Make sure to remove the LEOIMG.nbh file that you used for the Task 29. Personally I prefer clk cause it makes the HD2 run like a native Android device, but you are having a communication error so this may lead to problems if you use clk as you have to flash Clockwork Mod Recovery via USB when you use clk. You know I would suggest you try a different USB cable as you might just have as faulty USB cable and that is what is causing the communication error. I would highly suggest you do this before trying to do anything at all more with the SD card. If you try another cable and it does not work then your HD2 more than likely has a faulty mini USB port.
If you try another cable and it works you can just use the toolkit to run the Task 29 and then use it to install either MAGLDR 1.13 or clk and then Clockwork Mod Recovery.
Click to expand...
Click to collapse
Whoa, after I read your post, I went and found another cable, attached it to the PC and turned on my HD2, it goes to the MAGLDR v1.11, but it has the options where I can use the volume buttons to choose things which I have never seen on this phone before lol.
What do you suggest I do since the options came up.
Wipe it and do MAGLDR v1.13
Or do one of the options on the screen
Okay well I've tried to task29 w/ the new cable, and it still does a communication error so there might be a problem with the mini USB port.
I tried to do task29 again via sd card, and this time I held down the volume down button for like 5 minutes until my fingers slipped, but there was no "searching" screen, just a "Loading..." screen and then it turns off after 10 mins.
I'm trying to get into that MAGLDR screen again with the options but I don't know how to, it was just too random.
I kind of wonder if a wrong radio was flashed to the phone and it got semi-bricked. I bought a phone once that was like that and tried to repair it and was unable to. I think there are people out there that can jtag it.
Maybe dude, right now im just waiting until someone knows exactly whats wrong with my phone and if they can fix it :d
i did do something to the radio, but i made sure it was the correct version according to their list of radios and the radio listed on my phone.
Anyway, im pretty much stuck. cant wipe via USB cable, of 3 different kinds.
and i cant wipe via sd card either.
will go back a few years and try and find old posts on old Kaiser thread,this starts to sound familiar with white screen and comms fail,if I remember properly it was/is problem with spl/hspl.
can you post what info does show on any boot screen.
am busy at moment will try searching later tonight.
Sent from my NexusHD2 using xda premium
One time I was able to flash something onto the phone and it was the "Radio_Leo_2.15.50.14" thing...
I don't remember why I did this but I did made sure it was compatible and it worked.
So it may have been the radio, I am not sure.
I do have pics of the boot loader screen before and after the flash.
If there are no solutions, I might as well sell them both. Which I'm about to do real soon