[Q] Problem with G-sensor - myTouch 3G, Magic General

Hi All,
I am new to android world, so please forgive me about my lack of knowledge.
Apparently I am with this version when I try to update it the updater show's me this version and in the phone it show's version 1.5(3.04.401.2 Official RUU Sapphire HTC Europe).
Now to the problem, after my phone get repaired(change of motherboard) i receive it with this version, but the now the phone doesn't rotate the screen. I try different akmd_set.txt, try to calibrate it with bubbles, but no luck at this point. My phone is HTC Magic G2 32A.
Please advice.
Thank you in advance,
Georgi

Related

Help Please - Bricked Elfin

Hi everyone, my first time here, I have an HTC Touch from Rogers, I failed to upgrade the ROM version for my Elfin, by mistake I downloaded the CDMA version and try to upgrade my GSM Touch. As a result my HTC stays on the 3 color screen, and I've already tried all the possible solution that are recommended on this forum, I haven't tried the Gold Card, and I guess that I need the original ROM for this HTC. The point here is that following the procedure to obtain the model of the HTC with the MTTY software on the log it doesn't shows the Model or CID. So I can really know what ROM is the one to download. At the back of HTC it shows ELF0101.
I really don't know what else to do and trying to make a Gold Car is really complicated because I really don't know much about computers or cell phones.
Is there another way to find out the Model and the CID ?
Does anyone has the same model ELF0101 from ROGERS ?
Can you please help me ?
Sorry for my writting, havent been practicing my writting in english I'm from Monterrey, Mexico.
Thanks to everybody
And sorry if this post is not to be here...
Yours is ELF010150 and ROGER001, just like mine.
Search for a shipped ROM with ELF010150 as the Model ID.
There is a Quebec Rogers one (ELF010150 ROGER202).. search for that, and use it in your Gold Card.
EDIT: http://www.4shared.com/file/8466312..._2216321_411351_030790_BLUE_Ship_Fullexe.html
sjaimes said:
Hi everyone, my first time here, I have an HTC Touch from Rogers, I failed to upgrade the ROM version for my Elfin, by mistake I downloaded the CDMA version and try to upgrade my GSM Touch. As a result my HTC stays on the 3 color screen, and I've already tried all the possible solution that are recommended on this forum, I haven't tried the Gold Card, and I guess that I need the original ROM for this HTC. The point here is that following the procedure to obtain the model of the HTC with the MTTY software on the log it doesn't shows the Model or CID. So I can really know what ROM is the one to download. At the back of HTC it shows ELF0101.
I really don't know what else to do and trying to make a Gold Car is really complicated because I really don't know much about computers or cell phones.
Is there another way to find out the Model and the CID ?
Does anyone has the same model ELF0101 from ROGERS ?
Can you please help me ?
Sorry for my writting, havent been practicing my writting in english I'm from Monterrey, Mexico.
Thanks to everybody
And sorry if this post is not to be here...
Click to expand...
Click to collapse

Windows Mobile 6.1 Lock in to Beta Massage

Hello Everyone,
I'm new to all this, I bought my HTC Touch ELF0100 HTC P3452 and after a week of use it start showing the Beta test release software massage, I been reading over the forums without any success on how to solve this issue, I can't use my new phone now, please any help would be appreciate it, I forget to mention that I bought it on Ebay and it came from china, I been trying to contact the vendor with no response from his part. Again, please help me or point me to the right direction on my search for a solution of this issue.
Thanks
Esojrod
ELF0100
HTC 3452
It might be an unoriginal HTC device.
Take out your battery and check around whether you see a HTC logo, or some other words.
Windows Mobile 6.1 Lock in to Beta Massage
Thanks for replying,
If I take the battery out I can see the HTC logo on the lower right corner of the battery housing.
This maybe relevant or not, but I noticed that when I connect the device to my laptop and try to sync it, a massage pop out saying that the " device is a prototype and remember to change the vendor ID".
Is there any way I can reinstall windows mobile on it. At this time I do not have any information on the device.
Thanks for your help.
Esojrod
ELF0100
HTC 3452
Hello, follow my simple guide.
Sorry for the late reply, was settling some of my chemistry and physics work.
http://forum.xda-developers.com/showthread.php?t=525815
(Read the 7th and 8th post)
Than post everything you see there to here.
Feel free to ask me any questions.
PM if urgent.
Wait, if that dont work, go to the elf upgrading forum and Hard SPL your device.
Hello,
Thanks for all the valuable information and posting you send me, unfortunately I'm not able to sync my elf with activesync and I cant either hard reset or neither of the buttons seems to be working beside the one to control the volume, when I press the power button and this one the phone display a " Enter bootloader / updated from SD Card? " message on the screen.
Something that I can do with this little brick now?
Thanks for your help.
Esojrod
ELF0100
HTC 3452
wait, im lost.
so what did you do to your device?
Hi
Did you by your device new or seond hand as this message may be displayed after flashing the unbricker test rom
so if it is second hand this device maybe was bricked and you will need to CID unlock and flash a new rom or search for an official rom for it
I buy it on ebay and supposedly was new, when I receive it it work fine but I noticed that the date was wrong and corrected it after that all I can see is the Beta test message when it load windows mobile 6.1.
Any help you guys can provide would be greatly appreciated.
Thanks for your help.
Esojrod
ELF0100
HTC 3452
Make sure you leave negative feedback, so others do not get duped! if you cannot hard reset like normal Touch instructions, it is a Clone Elf or Elfin.. FAKE! Let others know!
the beta thing does not really mean its a fake, just could be installed incorrectly the OS, but if you caanot Hard Reset, that is a sign of a fake..... REPORT, NEG HIM!
Thanks guys,
I just found out that this is a fake ELF, I hard reset it following this link , now it it out of the Beta message, but if I try to correct the date again goes back to the same screen with it.
I know that you guys do not support fake ELF, but can I flash the rom on it to a new one, or does anybody know how to get rid of the message and use to current date and time?.
Thanks for your help.
Esojrod
ELF0100
Fake HTC 3452
Usually flashing a genuine HTC rom will brick a unoriginal phone.
You may want to try and there is a thread on it.
http://forum.xda-developers.com/showthread.php?t=529206
See how it goes.
NOT ADVISABLE.

HELP - New ROM on HTC Magic

Hello All,
I have had my HTC magic now for 3 days and loving it. However, reading around it seems to be best to leave the factory ROM and use a different one.
I am considering the CyanogenMod.
Firstly, could someone tell me if this ROM is compatible with my phone (current details of the phone are below)
Secondly, could someone advise on how I do it safely (in n00b terms) and what tools I will need on my Laptop to do it.
Current Firmware: Android 1.5
Build Number: CRC24
Phone: HTC Magic
Provider: Vodafone
Thanks in advance
I should add its the "With Google" model if that makes any difference.
Try reding "unlockr" page for my touch 3G or Saphire which is same a Magic by vodafone. 32B Chip.
Tool you will need is called Android SDK latest.
Also you will need to make sure that your Wnidows OS finds the phone and installs correct drivers. That should be done before anything else.
Once understood you will root and flash your magic in less than 10 mins!

broken htc Magic Vodafone (32B)

Hi,
I have tried for hours looking through the forum and trying different methods with no avail so was hoping someone could help me and keep it as simple as possible.
My HTC magic branded vodafone with a 32B board randomly freezes and sometimes has problems ending calls. It appears to be a software problem so was hoping flashing it would solve it however I havent been able to find a simple guide on howto do this.
If someone could help me out with a dummys guid to flashing my phone I would be grateful
Thank you in advance
James
p.s the phone is not rooted, its just the standard spec you get when brought.

LG-G-2 after update latest vertion screen not work

help please i have 2 piece lg g-2 after update latest vertion screen not work how to solved problem i have big problem with client ..tnx.
Which g2 do you have? Which ROM did you try to update? The touch doesn't work or is the screen blank?

Categories

Resources