I have a problem with this NAND its working well.. problem is.. i want to change to any different NAND. coz mine is low version lol.
i hold the off button and choose the flasher.
then i plug in my USB. nothing happen i downloaded the NAND i wanted. clicked DAF.EXE ( administrator ) it says... cannot detect USB
i need help
I think he means that he wants to update his Magdlr, as do I. Can anyone tell me/us how to do it? I tried it from the bootloader: nothing, and I tried it from magdlr flashing mode: nothing.
EDIT: Fixed it using an USB 2.0 port instead of 3.0
i'm using MAGDLR 1.11 . i just need to change my android. from old one to http://forum.xda-developers.com/showthread.php?t=877777 this
Do you have ActiveSync or Windows Mobile Device Center running?
Related
Im in the process of loading the steps for the NAND Android ROM and right after i loaded the MAGLDR 1.11 my active synce stopped working. Now i can't load NAND Android ROM cause my computer wont recognize my phone by activesync.
All my phone says whenever i turn it on is:
Android Flasher Mode
Wait USB...USB
Does anyone have any idea what i can do to fix it. forgive me im a newb.
+1
i have the same problem here!!
Guys pls help
The usb message your seeing means it is connected by usb. You should be able to continue. Not sure activesync recognises magldr.
Sent from my HTC HD2 using XDA App
Im sorry if im wrong but ofcourse your phone wont get regonized by active sync anymore because you took off windows mobile from your phone when you installed nand. Just be paitence when u connect your phone to your computer and it will deffently get regonized and you will be ready to flash new roms.
Sent from my HTC bravo using XDA App
dustin1939 said:
Im in the process of loading the steps for the NAND Android ROM and right after i loaded the MAGLDR 1.11 my active synce stopped working. Now i can't load NAND Android ROM cause my computer wont recognize my phone by activesync.
All my phone says whenever i turn it on is:
Android Flasher Mode
Wait USB...USB
Does anyone have any idea what i can do to fix it. forgive me im a newb.
Click to expand...
Click to collapse
hatomee91 said:
+1
i have the same problem here!!
Guys pls help
Click to expand...
Click to collapse
When you see this usb...usb you are connected.
Now right click daf.exe or android inastaller.exe or whatever the name and choose "run as administrator" and the install should start
read the second link in my signature
It says it is connected but when I run as admin it says usb init failure. What do I do then?
Sent from my HTC HD2 using XDA App
I saw a few posts about this problem. The fix is to reflash HSPL and load Magldr again.
http://forum.xda-developers.com/showpost.php?p=10351794&postcount=976
This is what helped me... Courtesy OP http://forum.xda-developers.com/showthread.php?t=893948
Not able to make a usb connection to the phone when in Magldr
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Go to the Activesync icon in the bottom right corner, right click on it and untick the option "Allow usb connections" and then connect the device again. Run daf.exe (or install.exe) as administrator by right clicking on it and selecting the option (if using Windows7 or Vista). Hopefully the usb drivers will then install and the Android Rom will flash.
Another option could be to uninstall and reinstall Activesync or to try different usb ports on your pc. If that doesnt work and you have Windows XP then you need to try on a machine with Vista or Windows 7.
If none of this works then try taking out your micro SD Card and repeating the process or flash a Custom Rom before you flash Magldr rather than a Stock Rom.
Lastly you could try starting the NAND installer with the phone unplugged and then plugged the phone in. The installer should immediately detect your device and proceed to flash.
Hi...
I have a TMOUS HD2 and I had a MDJ Rom on it but i travelled to India and i had occasional hangups and restarts with the phone. So i tried flashing to a different ROM and i tried MIUI but the condition persisted (HAD MAGLDR 1.11 and CWM 1.2)
However that didnt work and i couldnt update the radio too (assuming that the EDGE connection is messing up the phone)
So i flashed back to the TMOUS Stock Rom RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship
and installed Radio 2.15.50.14 and HSPL 2.08.
After that i tried installing MAGLDR (1.13) in my Windows 7 system but it wouldnt. So i used a windows vista system and installed it using Romupdate utility.
Now i am trying to install CWM 1.3 but i keep getting this error
An error has occurred
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (815)
Error Description:
Info: .\RSPL\RSPL.cpp (558)
On phone:
Partition layout same
Erase
...
...
Save EMBR...
Default OS is AD NAND
Empty 0 partition .. OK
Flashing 1 partition... 1 [221-23E] MO
Can someone help pls? i couldnt post in the development forum cos i have to make atleast 10 posts else i would have posted this in the CWM 1.3 thread or this one even http://forum.xda-developers.com/showthread.php?t=981811.
Also in option USB Flasher from MAGLDR
the prompt says WAIT USB... even after connecting the USB to the phone. HOwever on running the DAF, it comes as WAIT USB...USB but many threads say that it has to be WAIT USB..USB even before running the DAF for CWM.
Thanks in advance
Andrew
Shamelessly bumping the thread so that someone could help me!!!
AJ
What's wrong is that you have allowed USB connections in ActiveSync. Open ActiveSync and untick the "allow USB connections" box and reflash and it'll flash correctly.
Ok... since its windows 7 / Vista there is only Mobile Device Center and i have unchecked the option "Allow USB Connections" And I still get the error...
Is there any workaround for this ?
Does anyone know why there was frequent system hangups ? Could someone help me find the root cause of this one ?
I am trying to install any new rom and see if the problem disappears in anything. But unfortunately I am stuck with CWM install.
AJ
which size cwm are you trying? there have been a few reports lately (myself included) that teh 150 ver failed in various ways, , download the 250meg ver and edit flash.cfg to 150 (or just leave as 250 for a quick test flash) and see if it works.
samsamuel said:
which size cwm are you trying? there have been a few reports lately (myself included) that teh 150 ver failed in various ways, , download the 250meg ver and edit flash.cfg to 150 (or just leave as 250 for a quick test flash) and see if it works.
Click to expand...
Click to collapse
Hi,
I tried the 250 one and the 450 one but it still fails. I dont know what is going wrong.
AJ
Try doing it like this.
Turn on your phone with vol down key held to enter bootloader (tri colour screen)
Run Task29.
When the phone reboots hold vol down again to get back into bootloader.
Flash MAGLDR 1.13 from bootloader by running "ROMUpdateUtility" instead of the DAF.exe.
Should work without a problem, I always flash MAGLDR like this.
I don't think it relies on mobile device centre like this so should eliminate any problems in that area.
This time when it reboots hold the power button to get into MAGLDR. Select USB flasher and flash the 150MB CWM partition. I sometimes have problems with the larger partitions but 150MB one always works.
Then install which ever rom you use using recovery option from MAGLDR.
Also make sure you have the latest versions of everything:
MAGLDR 1.13 - http://forum.xda-developers.com/showthread.php?t=893618
CWM partition should be version 1.3 - http://forum.xda-developers.com/showthread.php?t=898913
zX TheRipper Xz said:
Try doing it like this.
Turn on your phone with vol down key held to enter bootloader (tri colour screen)
Run Task29.
When the phone reboots hold vol down again to get back into bootloader.
Flash MAGLDR 1.13 from bootloader by running "ROMUpdateUtility" instead of the DAF.exe.
Should work without a problem, I always flash MAGLDR like this.
I don't think it relies on mobile device centre like this so should eliminate any problems in that area.
This time when it reboots hold the power button to get into MAGLDR. Select USB flasher and flash the 150MB CWM partition. I sometimes have problems with the larger partitions but 150MB one always works.
Then install which ever rom you use using recovery option from MAGLDR.
Also make sure you have the latest versions of everything:
MAGLDR 1.13 - http://forum.xda-developers.com/showthread.php?t=893618
CWM partition should be version 1.3 - http://forum.xda-developers.com/showthread.php?t=898913
Click to expand...
Click to collapse
Hi,
I tried doing like you said.
I downloaded TASK29...
Got into bootloader (4 color screen).
Connected the USB cable... waited for drivers to install and then waited till the prompt changed from SERIAL to USB.
Started TASK29. (as adminstrator - windows vista 32 bit)
Showed Image version as blank and Updated ROM as 2.00.000.00.
Clicked on NEXT and then the Screen changed the HTC with 0%.
It is stuck there.
Now i am unsure what to do.
AJ
HunterAJ said:
Hi,
I tried doing like you said.
I downloaded TASK29...
Got into bootloader (4 color screen).
Connected the USB cable... waited for drivers to install and then waited till the prompt changed from SERIAL to USB.
Started TASK29. (as adminstrator - windows vista 32 bit)
Showed Image version as blank and Updated ROM as 2.00.000.00.
Clicked on NEXT and then the Screen changed the HTC with 0%.
It is stuck there.
Now i am unsure what to do.
AJ
Click to expand...
Click to collapse
Don't know if you should unplug the phone. After it's started, it's possible to brick your device by unplugging in the process of wiping. I don't have any advice after that, but just a note if you're wondering whether it's safe to unplug. Wait 'til someone other than I with experience says otherwise. Sorry and good luck.
That has happened to me once before, not sure if it was during Task29, flashing a stock rom / radio or MAGLDR. I left it for a long time and in the end decided there was nothing I could do but pull the battery and pray my phone wasn't bricked. Luckily it was ok and I tried again and everything was fine. Don't think anyone will tell you to do that though because none of us want to be responsible for bricking your phone!
If it hasn't got anywhere after 10 minutes or so then I guess you won't have much choice.
In theory if it's stuck at 0% then it hasn't started yet so it might be ok to unplug and pop the battery but don't take my word for it.
Would probably be more of a risk if it was half way through and you unplugged it.
Good Luck!
Well i did post earlier that i didnt brick my phone yet... but i have tried everything else that has been said in the community and now i am losing all hope of getting the android to work on my HD2...
Can someone pls help ??
Cotulla / bebe - Anyone ? I know you possibly might not check these forums but just wanted to ask your help.
AJ
Give this a try...
Use the task29 from my thread .. do what it says ..
DL one of the setup programs.. 150 - 430 depending on what ROM you want.
And follow the on screen helps ..
http://forum.xda-developers.com/showthread.php?t=981811
Im switching to nand rom,but my laptop will not huck up to my leo vire usb.....so is it poss to flash by bluetooth? Thanks
OP,
I'm going to assume when you use the term NAND ROM, you're implying that you're trying to install Android onto your device.
Having said that, what do you mean exactly that your HD2 is not able to connect to your laptop?
Are you not able to get "USB" in the tri-colored screen when connecting your HD2 to your laptop? Or has your laptop busted all of its USB ports?
KARMIK said:
Im switching to nand rom,but my laptop will not huck up to my leo vire usb.....so is it poss to flash by bluetooth? Thanks
Click to expand...
Click to collapse
If you mean your computer is not recognizing your HD2 while pluged in then this is fixable. If you are trying to flash a NAND Andriod ROM you need to hold down the power button as you turn on your HD2 until you see MAGLDR come up and then select NAND flasher then flash the ROM. You can not use the bootloder to flash a NAND Andriod ROM. Also the reason why your computer is not recognizing your HD2 in bootloader is when you installed MAGLDR to your HD2 it changed the drivers for your phone on the USB port you used to flash MAGLDR. So if you ever want to reflash a Wndows Mobile ROM you will have to use a different USB port or manually change the drivers on your USB port back to your stock drivers for your HD2. You can also try using anothet computer. If non of the above helps try anoyher USB cable yours could posibbly be faulty.
KARMIK said:
Im switching to nand rom,but my laptop will not huck up to my leo vire usb.....so is it poss to flash by bluetooth? Thanks
Click to expand...
Click to collapse
MAN BE CAREFUL AND FLASH AFTER GOING THROUGH THE HELP PROVIDED HERE DEPENDING ON THE HD2 VERSION U HAVE EURO OR T MOBILE
FLASH VIA CWM FROM MALGDR AND INSTALL FROM SD CARD
http://forum.xda-developers.com/showthread.php?t=653614
http://forum.xda-developers.com/showthread.php?t=609477
i just put on nand rom for the first time, and i want to re-do it with american android, but when i try running magldr 1.13, it says usb not connected and i cant get past this to flash american android, any answers for this plz, ty much, error :260:
can you give us pls some more input on what you are doing exactly? Where does it get stucked, when you boot it or do you select something from the menu and then the problem with no usb connected occurs?
well when i go into magldr and try to get it to go into usb flash, so i can flash american android, it opens and i check the boxes and click next, then it scans for the usb, but it wont bring up an error, and it tells me to make sure my usb is connected and it is connected already???? im a noob at this so i cant explain to much into what im doing wrong, im just going by the steps ive read, i have android on it and it works just great, but i want a dif rom, not the stock rom i found.
when you choose usb flasher do you see:usb flasher......usb
i think americandroid is using daf method.so right click on aca.exe and run as administror.
be sure you downloded mgldr version of it (not clk)
never mind, my mistake
when i try running magldr it says error and it wont run magldr, and usb is connected, but it says it isnt...?
plz can anyone tell me what im doing wrong??? im running magldr and my hd2 is connected, but when i check the boxes in magldr and click next it looks for my pda, then says error 260 and make sure cradle/cable is plugged into pc, and it is, and it wont go into magldr so i can click usb flash drive...???
please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr
mutil said:
please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr
Click to expand...
Click to collapse
ok last night i did my first nand on my nd2, i ran the hspl, then i ran the magldr 1.13, then i scrolled down to usb flasher, then i ran the rom that the youtube link gave me, http://www.youtube.com/watch?v=cvS4EvS0PAw then it all worked, i had android on my phone, but i dont want the rom in the youtube link, i want one from this forum american android, and i was wondering, when i go to run magldr on my nand android i flashed, it tells me error and that to check if my phone is connected, and im just trying to do what i did in the youtube video but with a dif rom, but it wont work from android, it did just fine on wm 6.5, and my phone is connected to the usb, but it tells me it isnt, but i can still transfer music and other things, but when i go to run magldr it tells me my phone isnt connected, so i cant get into magldr and scroll down to flash usb and use the rom i want to use from this site, better? plz help thanks much.
in order to go into mgldr menu power off the phone.then power on but hold down the power key until mgldr menu comes. its not necessary to reload mgldr for each rom.if you installed it to your phone now it is in it.
i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<
getting phone working...
_fly
have you used the the HD2 toolkit? You can find/download from here
http://forum.xda-developers.com/showthread.php?t=1090783
try wiping the phone with task29, then loading the MAGLDR or cLK / which ever nand/rom you want to use. Hopefully this works for you....
_fly said:
i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<
Click to expand...
Click to collapse
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951
mutil said:
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951
Click to expand...
Click to collapse
when i go into ad recovery it says no boot source???
Then you have to install cwm first.
I have had a similar problem with my phone and what worked for me was disconnecting the usb cable and plugging it back in. then it seen it as usb and i was able to flash the ROM. i know it seems rather simple but this small fix might work for you as it did for me.
if you can install cwm i would highly suggest to do that and also looking into the hd2 toolkit as someone else as already pointed out.
I have searched and searched and cant find a reason why this isnt working. I have a new hd2 with hspl and magldr 1.13. I have windows mobile device center on my pc. I have downloaded a partition to flash so I can install a rom, but the usb flasher option gets stuck on Wait USB... This is not my first hd2, and i recall having this problem before. Can someone please point me in the right direction? When I put the phone in bootloader and plug it in, my comp. recognizes the phone but not in magldr.
Edit: I have an old hd2 (touchscreen doesnt work), and tried the USB Flasher and had the same problem.
3agle said:
I have searched and searched and cant find a reason why this isnt working. I have a new hd2 with hspl and magldr 1.13. I have windows mobile device center on my pc. I have downloaded a partition to flash so I can install a rom, but the usb flasher option gets stuck on Wait USB... This is not my first hd2, and i recall having this problem before. Can someone please point me in the right direction? When I put the phone in bootloader and plug it in, my comp. recognizes the phone but not in magldr.
Edit: I have an old hd2 (touchscreen doesnt work), and tried the USB Flasher and had the same problem.
Click to expand...
Click to collapse
what hardspl do u have........i have 2.08,don't use the latest 3.0.3,magldr doesn't like it lol