hello guys as the title says I bought the dell streak from best buy on jan 2 and was trying to put the 2.2 on it, so I did the one click root and it worked, but then by mistake I did the fastboot mode .... and root it again .... after that the phone got stuck on the dell logo with the flashing lights......
is there a way to run the stock recovery and rom on the computer so I can fix my phone.... please I need input.....
I want to restore the phone again .... can somebody help me ...????
is it fixable?? I have a dell streak white at&t 1.6 android 6601
thanks..... please help!
Can you still get into fastboot or recovery?
Sent from my Dell Streak using XDA App
stoney73 said:
Can you still get into fastboot or recovery?
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
yes I can still get into fastboot or recovery mode I tried running some rom's but after the half point an error comes out and aborts the new roms...
If you can get into fastboot and recovery your fine. I recommend the qdl route personally.
Sent my Dell Streak from XDA app.
Stock 318 with tweaks.
Gtalk:jeremyritzmann
Twitter: jeremy_legend
Or flash the clockwork mod and then follow the instructions in dj steves thread
Sent my Dell Streak from XDA app.
Stock 318 with tweaks.
Gtalk:jeremyritzmann
Twitter: jeremy_legend
Only way to upgrade the white dell streaks is with the qdl tool. Theres something about them... All other methods just leave you in a boot loop. Go to the guide section of streakdroid.com it has everything you need to get to 2.2, including a great video tutorial.
Sent from my Dell Streak
Not Android Development
Moving to General
Kohawk09 said:
Only way to upgrade the white dell streaks is with the qdl tool. Theres something about them... All other methods just leave you in a boot loop. Go to the guide section of streakdroid.com it has everything you need to get to 2.2, including a great video tutorial.
Sent from my Dell Streak
Click to expand...
Click to collapse
ok thanks.... but this is what happened i got frustrated and went to bestbuy and exchanged it .... but now ... for some how I rooted then I installed 1.8.7 recoverymod and after that I did the new baseband ..... and the rom wouldnt load so my phone still load to 1.6 but it doesnt have wifi nor 3g and on the about divece the baseband says... unknown......
what can I do.????? jejeje thanks!!
claudiovr6 said:
ok thanks.... but this is what happened i got frustrated and went to bestbuy and exchanged it .... but now ... for some how I rooted then I installed 1.8.7 recoverymod and after that I did the new baseband ..... and the rom wouldnt load so my phone still load to 1.6 but it doesnt have wifi nor 3g and on the about divece the baseband says... unknown......
what can I do.????? jejeje thanks!!
Click to expand...
Click to collapse
use QDL holmes, or better yet exchange it and get a black one. I could never get the white one to work. I eventually bricked it, took it back and got a black one. Never tried anything with the black one until last night, and it went flawlessly with QDL.
claudiovr6 said:
ok thanks.... but this is what happened i got frustrated and went to bestbuy and exchanged it .... but now ... for some how I rooted then I installed 1.8.7 recoverymod and after that I did the new baseband ..... and the rom wouldnt load so my phone still load to 1.6 but it doesnt have wifi nor 3g and on the about divece the baseband says... unknown......
what can I do.????? jejeje thanks!!
Click to expand...
Click to collapse
well you are going about this all backwards... first and foremost. You have a white streak, so the ONLY way to get 2.2 is through the QDL tool. Secondly, no matter what color the streak is, you cannot jump directly to one of steves builds from 1.6(donut). You flashed the 2.2 baseband, which is not compatible with your current stock rom, that will kill your data and phone connection amongst many other things. You need to go to streakdroid.com, take a look at the guides section and then upgrade via the QDL tool. That is your only way other than waiting for the OTA.
Related
I have a White Dell Streak from Best Buy AT&T. I was trying to update to 2.1 or 2.2 and I cannot get it past the boot logo. I get the flash LEDs.
Can someone help me get the device back to 1.6 Stock for US?
I am so beat down right now trying to fix it.
tekomni said:
I have a White Dell Streak from Best Buy AT&T. I was trying to update to 2.1 or 2.2 and I cannot get it past the boot logo. I get the flash LEDs.
Can someone help me get the device back to 1.6 Stock for US?
I am so beat down right now trying to fix it.
Click to expand...
Click to collapse
For some reason, the white streaks are different... the usual methods for flashing do NOT work. take a look at this thread, this has worked for others that have the White Streak. Follow the QDL tool guide word for word, and you should get straight to 2.2. Your not stuck because of anything your doing wrong... its just something with those white streaks. Good luck.
http://android.modaco.com/content/d...24010/warning-white-dell-streak-is-different/
Thread can be closed but I thought I'd share that it was fixed using QDL Tool on streakdroid.com
Didn't see it posted it yet here so thought I would give it to u guys:
Dell just released a new official rom... downloading now... it's a 318 rom now (should be an unlocked EU rom)... The page: http://mobileupdate.dell.com/?version=GAUSB1A121100 now links to the http://mobileupdate.dell.com/PackageProduc...18_12821_00.pkg which is again 150 MB
Is there anything new in this version?
Just uograded mine without a hitch. I can confirm that no longer getting the too many redirects error browsing.
Went from GAUSB1A130900-US to GAUSB1A131800-US
Sent from my Dell Streak using XDA App
Can you flash from ATT 1.6 directly to this or do I need to be on another version first??
shababak said:
Just uograded mine without a hitch. I can confirm that no longer getting the too many redirects error browsing.
Went from GAUSB1A130900-US to GAUSB1A131800-US
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
How about UI or other differences or Bugs?
UI is similar to before.
What things are you intrested in? Let me know and ill try it out.
Btw... Quadrant score was around 800 (tested after upgrade)
Sent from my Dell Streak using XDA App
shababak said:
UI is similar to before.
What things are you intrested in? Let me know and ill try it out.
Btw... Quadrant score was around 800 (tested after upgrade)
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
How you update over 309 or 315?
Did You Root this Build? or is z4 works?
How do you update from o2 2.1? I keep getting FOTA model mismatch.
Update: I had 02 2.1 running on my unlocked streak on ATT. All I had to do to get this on my Streak was flash using fastboot the 309 recovery img. once I flashed that I booted into recovery mode and selscted update 2 and it installed right from the SD card. Will mess with it tonight and see if it is fully functional.
Update over 309.
Root is what im battling now. Z4root isnt playing nice.
Sent from my Dell Streak using XDA App
shababak said:
Update over 309.
Root is what im battling now. Z4root isnt playing nice.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
You try super one click?
Feels like dell has locked things down.
Cant find these apps anymore on market.
Tried downloading the apk from the xda forumn from the phone and I get a failed download "cannot download. The content is not supported on this phone"
Sent from my Dell Streak using XDA App
New In this update
Not that it may apply to everyone, but the facebook contacts sync is now included and looks to be working in this latest release.
Got around this issur. Still no luck with z4root 1.3
Sent from my Dell Streak using XDA App
kasperke said:
Didn't see it posted it yet here so thought I would give it to u guys:
Dell just released a new official rom... downloading now... it's a 318 rom now (should be an unlocked EU rom)... The page: http://mobileupdate.dell.com/?version=GAUSB1A121100 now links to the http://mobileupdate.dell.com/PackageProduc...18_12821_00.pkg which is again 150 MB
Click to expand...
Click to collapse
Your 2nd link = 404. Clicking through from the 1st one = success. Soon as the D/L completes I'll try rooting with my rom kitchen and report back asap.
UPDATE 1: Yeah, well it goes without saying that the EU rom update won't place nicely with my US Streak, and as of right now the .pkg file is resisting my attempts to extract it. I've got to head to the office pretty quickly here, but I'll see what I can accomplish from there. If anyone with the EU version wants to help, load up the update, use fastboot to flash the custom streak recovery console, do a nandroid backup, and post that somewhere I can get at it. I should be able to root that pretty quickly. ( maybe... I've been wrong before... a lot. )
I have 309 and when I downloaded it from the link and went to install it. FOTA missmatch. What gives?
Terrigno said:
I have 309 and when I downloaded it from the link and went to install it. FOTA missmatch. What gives?
Click to expand...
Click to collapse
Use THIS Recovery and should Flash ok
Terrigno said:
I have 309 and when I downloaded it from the link and went to install it. FOTA missmatch. What gives?
Click to expand...
Click to collapse
From your carrier icon I'd say Euro Rom + US Streak = FAIL. Don't feel bad I tried it too just for the heck of it.
kasperke said:
Didn't see it posted it yet here so thought I would give it to u guys:
Dell just released a new official rom... downloading now... it's a 318 rom now (should be an unlocked EU rom)... The page: http://mobileupdate.dell.com/?version=GAUSB1A121100 now links to the http://mobileupdate.dell.com/PackageProduc...18_12821_00.pkg which is again 150 MB
Click to expand...
Click to collapse
k no problem really but you copied my words literally word by word from Modaco...
jeffrey2000 said:
k no problem really but you copied my words literally word by word from Modaco...
Click to expand...
Click to collapse
from the looks of it i'd say he tried to quote you but forgot the tags
Hi, i have a Dell Streak with the black screen.
It's like the Streak in this video youtube.com/watch?v=rQMHkaM_urM
There is some guide to follow to restore the device?
daniele_89 said:
Hi, i have a Dell Streak with the black screen.
It's like the Streak in this video youtube.com/watch?v=rQMHkaM_urM
There is some guide to follow to restore the device?
Click to expand...
Click to collapse
Flash this Recovery HERE
Then Flash this System HERE
And all should be ok
it doesn't go in fastboot o recovery
it remain only with black screen like the streak in the video...
If you cannot get to fastboot then you need to contact dell
lufc said:
Flash this Recovery HERE
Then Flash this System HERE
And all should be ok
Click to expand...
Click to collapse
How do I flash it? Do you have instructions
daniele_89 said:
it doesn't go in fastboot o recovery
it remain only with black screen like the streak in the video...
Click to expand...
Click to collapse
Yes i can get into fastboot or recovery. The second link is not working? Do I need to unzip the file?
borijess said:
Yes i can get into fastboot or recovery. The second link is not working? Do I need to unzip the file?
Click to expand...
Click to collapse
can get it from here
http://mobileupdate.dell.com/?version=GAUSB1A121100
flub said:
can get it from here
http://mobileupdate.dell.com/?version=GAUSB1A121100
Click to expand...
Click to collapse
I dont get how this is going to help me. I was on O2 2.1 8105 build. Tried to go to update steve 2.2 that is when my phone got stuck on Dell logo. Will going through the process above going to fix that?
borijess said:
I dont get how this is going to help me. I was on O2 2.1 8105 build. Tried to go to update steve 2.2 that is when my phone got stuck on Dell logo. Will going through the process above going to fix that?
Click to expand...
Click to collapse
Yes it should do hopefully it will change your baseband to 00 then you can flash OK if that does not work then you need to go to Steve's thread and flash 1.1.1 then update to Steve's 2.2 or dells 2.2 any more probs just let us know and hope it goes OK
lufc said:
Yes it should do hopefully it will change your baseband to 00 then you can flash OK if that does not work then you need to go to Steve's thread and flash 1.1.1 then update to Steve's 2.2 or dells 2.2 any more probs just let us know and hope it goes OK
Click to expand...
Click to collapse
YOU ARE FREAKING AWESOME. I LOVE YOU MAN!!! IT WORKED 2.2 official build. Do I have to worry about anything? My original build was att 1.6 locked with BB-31.
Hey Lucf,
Now that I got the 2.2 official froyo how do I improve quadrant score. Right now I am at 853.
the only thing that works is the Qualcomm Diagnostic and the QDLTool but the dell still no work...
borijess said:
YOU ARE FREAKING AWESOME. I LOVE YOU MAN!!! IT WORKED 2.2 official build. Do I have to worry about anything? My original build was att 1.6 locked with BB-31.
Click to expand...
Click to collapse
So I was having a similar issue, and just tried to run my phone into the recovery mode. After selecting update to the .pkg file from sd card, phone went black.
I'm going to try this again and do a battery pull to take it out of this state, hopefully it works.
Also, did you just put the 00 baseband on and flash straight to 1.5, or did you go to 1.1.1 and then to 1.5?
Shadowphox said:
So I was having a similar issue, and just tried to run my phone into the recovery mode. After selecting update to the .pkg file from sd card, phone went black.
I'm going to try this again and do a battery pull to take it out of this state, hopefully it works.
Also, did you just put the 00 baseband on and flash straight to 1.5, or did you go to 1.1.1 and then to 1.5?
Click to expand...
Click to collapse
Actually this process that lucf explained puts you on official froyo 2.2. I tried to get on steves froyo but that is whats screwed up my streak. The process above saved it.
Sent from my Dell Streak using XDA App
So, I"m getting dell logo of death...
I received my dell streak with stock 1.6
rooted phone, installed clockworks, and tried to install streakdroid 1.6.1 from update-1.6.1.zip..
Install failed, tried to install stock 1.6 from zip (clockworks) with no success.
Then after some help tried streakdroid 1.6, then streakdroid 1.5.1.
Each time I've "cleared cash" or w/e. give phone at least an hour to try to install.
My history in sig. Not a noob I've always hacked and unlocked, but this is killing me. what am I doing wrong.
I don't see in your post where you used the QDL tool to go from Stock 1.6 to Stock 2.2 305 and then to Stock 2.2 318 BEFORE using StreakMod to flash Steve's 1.61.
You said you are not a noob. Don't act like one. READ all of the instructions FIRST before you try to go any further. You should be able to recover using the QDL tool.
I'm not trying to flame you. It's just that there is a wealth of knowledge here. Search tool is your friend.
Lol Never go straight from stock 1.6 to. DJ Steave1.6.1 .... That's just asking for trouble.
Sent from my Dell Streak
AT&T DJ_Steve STREAKDROID v1.6.1
******Superuser Rooted*******
stormtrooper1 said:
Lol Never go straight from stock 1.6 to. DJ Steave1.6.1 .... That's just asking for trouble.
Sent from my Dell Streak
AT&T DJ_Steve STREAKDROID v1.6.1
******Superuser Rooted*******
Click to expand...
Click to collapse
What do you think I should do next? Use this QDL?
inorder for me to flash custom roms on my streak, i literally had to go from the stock AT&T 1.6 to the stock O2 1.6 rom, then from there the O2 2.1 rom and then I was finally able to get streakdroid to flash and boot.
It's been awhile tho so not sure if anything has changed since then, but I had to flash in that order with 3 different phone else streakdroid or any other custom roms would not boot. After going thru that BS the one time, I don't have nearly any problems flashing new roms now. Was wierd. =P
Most definitely QDL to stock 2.2. That will get you through the first step. Then to 318 and lastly to Streakdroid 1.6.1
Sent from my Dell Streak
AT&T DJ_Steve STREAKDROID v1.6.1
******Superuser Rooted*******
stormtrooper1 said:
Lol Never go straight from stock 1.6 to. DJ Steave1.6.1 .... That's just asking for trouble.
Sent from my Dell Streak
AT&T DJ_Steve STREAKDROID v1.6.1
******Superuser Rooted*******
Click to expand...
Click to collapse
i went straight to 1.6 from stock.
my phone was stuck in boot, i used the first pass of the QDL tool over 1.6 and then my phone booted, i dunno why.
rymn said:
So, I"m getting dell logo of death...
I received my dell streak with stock 1.6
rooted phone, installed clockworks, and tried to install streakdroid 1.6.1 from update-1.6.1.zip..
Install failed, tried to install stock 1.6 from zip (clockworks) with no success.
Then after some help tried streakdroid 1.6, then streakdroid 1.5.1.
Each time I've "cleared cash" or w/e. give phone at least an hour to try to install.
My history in sig. Not a noob I've always hacked and unlocked, but this is killing me. what am I doing wrong.
Click to expand...
Click to collapse
Not Android Development
Please post in the Correct Forums
Moving to General
i just upgraded a stock 1.6 directly to 2.2 305 via qdl tool. Had no issues doing it.
then updated bootloader to 309 and flashed 318
Screw 318, 319, 339 (rogers), 340 (att) 2.2 roms...
With many hours wasted trying everything, I have finally gotten 2.2.2 AWS version to load properly on my Unlocked US Red Streak preloaded with 2.2 315...
here are the steps from any version..
1. Use QDL tool to go to 305 baseband 00. Get from steakdroid.com
2. Use 309 boot loaded located here http://android.modaco.com/content/dell-streak-streak-modaco-com/323792/309-recovery-image/
3. Download and rename Package 322 from dell to Update.pkg to your sd card. Download here http://mobileupdate.dell.com/PackageProductionLocations/Streak_322_12947_11.pkg
3a. Reboot and hold both volume buttons and go to software upgrade. Upgrade to 322.
4. once loaded, go to this thread and follow directions and download the img files from Broken. Make sure to follow the MD5 guide in subsequent links to get the MD5 to work properly. (this is something good to learn either way )
http://forum.xda-developers.com/showthread.php?t=970177
5. After copying the files in the right place on your sd card, reboot and with fastboot, load clockwork or streakmod recovery.. Streakmod folder is /sdcard/rom_backup/......
6. Go to nandroid and do a full restore, with streakmod you will get an error after system loads, don't worry, just reboot.
If all goes well you will be on baseband 11 (eu unlocked) and running build 341.
I can confirm with this baseband you do not have the flashing led lights like you have with baseband 318.
So glad I gave this one last try before giving up.
Methods to insanity that didn't work
-load 309 to 341 no dice
-load djsteve to 341 flashing leds
-load 318 to 341, flashing leds
- not to mention the hours wasted trying to get the nandroid restore to work with single files...
if you have any questions or problems, let me know. I will try and pop in once or twice a day...
Special thanks goes to..
Broken - for supplying the rom and trying to assist with help.
Themanii & homer4evr - for tips
Broken's 2.2.2 download - http://www.mediafire.com/?j4i2yc7idffq136
*************** After a successful load... make sure to do a FACTORY RESET under settings/privacy... it appears there is some stuff left over from Broken***********************************
Krad, thank you for this information. Looks like you are using your Streak in US w/ ATT.
Have you thought about using the ATT official froyo build baseband (34031) instead of the HK's baseband 322? It is too late where I am now, I will re-read the other thread you linked and try the 34031 (ATT) baseband... Will report back.
Alright it's like 3am. I have successfully installed 305 using the QDL tool wich took a bit because of the issues with win7 64bit. At this point I think I understand how to get back to 1.6, and/or move forward to the eu version of 341. Sucks there isn't just a straight download for the 341 US update zip/pkg.
Oh well, will finish sorting this tomorrow. Night folks, or morning
You do not need to go to 1.6
you start from 2.2 305 qdl tool...
From there you load the 309 bootloader via fastboot
and then simply the default way of going to 322 via software upgrade.
huoyjii said:
Krad, thank you for this information. Looks like you are using your Streak in US w/ ATT.
Have you thought about using the ATT official froyo build baseband (34031) instead of the HK's baseband 322? It is too late where I am now, I will re-read the other thread you linked and try the 34031 (ATT) baseband... Will report back.
Click to expand...
Click to collapse
A very special person is updating the dell streak wiki and on it it displays all versions of OS's and more importantly basebands... 00 for unlock us 11 for eu unlock, 31 for att.. etc
I had baseband 318_00 loaded and when I went to load this OS I got the flashing Led lights.. Everything worked, but it was annoying. After speaking to a few from Optus Aus. It dawned on me that they must be on a different baseband. I checked 322, which is unlocked for 00.. but it actually loads 11 baseband. Once i fired it up it worked great.
My guess is that you need a specific baseband to run the rom without the flashing led lights. We know this is an unlocked rom, but specifically for EU basebands... With that being said I don't think loading US ATT baseband from 340 will work. But it it worth a shot.
I have been on baseband 322, and have had zero issues with reception, etc... others have pointed out there wifi has better speeds.
I will be testing out the wifi hot spot today and gps to see how they go and report back.
I liked 322 and have almost zero problem too. It is definitely fast w/ 322. The only problem I have with it was it wont auto connect to ATT wifi hotspot. I cant even manual connect to the ATT wifi hotspot which is supposed to be free for us ATT user.
I will try the 340 now and report back. If it doesnt work, I will use the 322
Sent from my Dell Streak using Tapatalk
huoyjii said:
I liked 322 and have almost zero problem too. It is definitely fast w/ 322. The only problem I have with it was it wont auto connect to ATT wifi hotspot. I cant even manual connect to the ATT wifi hotspot which is supposed to be free for us ATT user.
I will try the 340 now and report back. If it doesnt work, I will use the 322
Sent from my Dell Streak using Tapatalk
Click to expand...
Click to collapse
Do you have the notification drop down issue? that annoyed me.
Krad,
Question: Do you use nandroid to selective restore all 4 files or just restore the system.img only as suggest in the "Root AWS Dell Streak 2.2.2 FRG83G" thread?
Thanks!
Krad said:
Do you have the notification drop down issue? that annoyed me.
Click to expand...
Click to collapse
Now that you mention it, YES... I do have that problem.
BTW, I am following this direction on Modaco to goto ATT 340 from any Froyo 2.2: http://android.modaco.com/content/d...3120/guide-from-any-official-2-2-to-2-2-at-t/
Which is so much faster and save me from having to downgrade to O2 2.1 -> O2 1.6 -> ATT 1.6 Then ATT 2.2.
huoyjii said:
Krad,
Question: Do you use nandroid to selective restore all 4 files or just restore the system.img only as suggest in the "Root AWS Dell Streak 2.2.2 FRG83G" thread?
Thanks!
Click to expand...
Click to collapse
I have all files on my sd card in the right place with the md5 file....
i do a full restore... with streakmod recovery.... individual files did not work for me.
Krad said:
I have all files on my sd card in the right place with the md5 file....
i do a full restore... with streakmod recovery.... individual files did not work for me.
Click to expand...
Click to collapse
ok. Thanks for the info. I will try now...
Surely Dell will release a 34X for baseband 00 devices???
Just confirming, I did a full nandroid restore on Broken's file and once boot up, I got an error saying that I have a diff google acct already setup - [email protected]? I know I can reset that under acct setting but I just want to confirm that this is what I am suppose to get with Broken's nandroid restore.
Thanks.
From the initial report, I think I have that capacitive button flashing: I am on Baseband - GAUSB1A134031-US w/ OEM - GAUSB1A134100 and best of all ANDROID 2.2.2
Thank you guys!! Krad, Broken, Themanii and homer4evr
ps. Just saw a post on "Root AWS Dell Streak 2.2.2 FRG83G" by 3GBeyotch, Post #84 that looks to provide a shortcut from 322 to 341 using fastboot: http://forum.xda-developers.com/showthread.php?t=970177&page=9
Krad, any chance you have the baseband (filename - amss.mbn) for Stock 322 handy? I think you can find it in the update.pkg.dec file after running the Dell Recovery to update 322.
Thanks.
So I don't need to go to 1.6 to get to the official US AT&T build with the correct baseband?
I have easily installed 340 and Streakdroid 1.8.1 via Streakmod and the images. Seems like it's strange that it's so hard to get back to 1.6 so I can get to US 341.
Take no offense but I really wish Dell had taken care of the US before the rest of the world was ever introduced to the Streak.
Yes I am an American pig-dog.
htcjikelly said:
So I don't need to go to 1.6 to get to the official US AT&T build with the correct baseband?
I have easily installed 340 and Streakdroid 1.8.1 via Streakmod and the images. Seems like it's strange that it's so hard to get back to 1.6 so I can get to US 341.
Take no offense but I really wish Dell had taken care of the US before the rest of the world was ever introduced to the Streak.
Yes I am an American pig-dog.
Click to expand...
Click to collapse
I am a little confused by your statement. This is what I know...
Stock 340 that you had is the Official US ATT froyo 2.2 and it has the correct baseband 340 for ATT along with it.
The 341 (only android 2.2.2 that I know for Dell Streak) is an unlocked version (someone mentioned that it may even be beta) and I believed is meant for T-Mobile from some posted info??
So, 341 is not the official US ATT froyo. Based on Krad's testing, I doubt you can even go from ATT official 1.6 to this 341...
Hope this make sense.
Looks like it is I who is confused.
I had the blinking lights with my version of 340. So did that mean it was the wrong baseband?
Yes I have a lot to learn about this here stuff.
htcjikelly said:
Looks like it is I who is confused.
I had the blinking lights with my version of 340. So did that mean it was the wrong baseband?
Yes I have a lot to learn about this here stuff.
Click to expand...
Click to collapse
Yes... the only baseband that worked for me without blinking lights was baseband 11.. which is "unlocked eu" baseband. 00 is "unlocked us".
I have been running this bad boy for about 24 hour and haven't made a dent in the battery. Been running rock solid with zero issues.
yes you must factory reset to get rid of broken's info. I believe he forgot to do that before he made his images.. but it is cool.. no worries....
tell me where to find the 322 baseband files and they are yours... I have not cleaned out my sd card or root... so the files should be there...
technically, if we can extract the 322 baseband.. you would just flash that with fastboot.. and then load the nandroid restore all and viola.. your duh duh done!
Krad, I got it already. 3GBeyotch extract that for me on the other 341 thread.
Just FYI, you can find it easily in the update.pkg.dec file <- usually show up after you did an update thru Dell Recovery in your root sd card.
BTW, are you able to use the online kitchen (http://uot.dakra.lt/) & framework-res.apk to cook the notification bar for 341?
Havent tried yet but i dont see why not. Maybe i make one tonight... i have some honeycomb graphics lying around from some captivate themes.
Sent from my Dell Streak using Tapatalk