Anyone know porting generic ROM (original htc ROM) to tattoo
eg Hero/Wildfire ROM to tattoo
main problem is custom recovery cant open/flash them they say bad zip or ROM
& orig. recovery match signature for phone - ROM
if any custom recovery can flash orig. ROM please tell me or how to extract orig. ROM
can HSPL can do this
Have you tried putting it onto your sd card and opening the file directly using a file manager app ??
Also what recovery are you using?
alpick36 said:
Have you tried putting it onto your sd card and opening the file directly using a file manager app ??
Also what recovery are you using?
Click to expand...
Click to collapse
yes I did
custom recovery 1 amanra maverick 2 clockworkmod
now I m working Rom kitchen
direct update wildfire ROM not working we may retain tattoo kernel & make mix ROM
its my exam time so I don't have much time I will work on it in Feb
Related
Hi everybody,
I'm have HTC Hero wich have some problems with USB. Windows has see this device as unknown device even when device is running at recovery(ra recovery 1.6.2), so I will send this hero to service when I have guarantee for he. But I have unofficial software therefore I have to install official ROM but I can't used RUU. Maybe is exists other way to install that software ?
have u tried just updating drivers?
[Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
....But no, as far as I know there is no method for installing an RUU without using a USB cable.
But I didnt need RUU, I only need information how to restore generic ROM for my hero
przeqpiciel said:
But I didnt need RUU, I only need information how to restore generic ROM for my hero
Click to expand...
Click to collapse
To restore generic ROM though, you use an RUU.
I had the same USB problem before I send it back for warranty to get it fixed. in order to install official rom without using USB:
1. get official rom which suit your HTC from http://forum.xda-developers.com/showthread.php?t=559622
2. flash the rom like you flashing other custom rom to your htc.
3. If you use flashrec to root your hero you probably have backup of your recovery image, put it on your sd card run flashrec this time restore your original recovery image. (if you dont have backup of your origiinal recovery image I uploaded mine in this post http://forum.xda-developers.com/showpost.php?p=4972904&postcount=41)
4. that's it! you got your virgin hero back. (http://forum.xda-developers.com/showpost.php?p=4965845&postcount=39)
if you have Nadroid back up of your Hero you can restore it in order to get back to original rom. but again you need to follow step 3 to flash original recovery image.
I have the same problem. I had restore the original android 2.1 (T-Mobile G2 Touch) from nandroid. But flashrec does not work on this version. I got an error message: "Flash FAILED: Could not run command." Had anyone a idea?
Hi,
I installed android 2.2 (NAND) on my HD2 yesterday. I did this using MAGLDR first and then an unknown android 2.2 rom with a DAF.exe inside it. Now I want to update 2.2 to CyanogenMod 7 (2.2.3). But the CyanogenMod folder doesn't contain a DAF.exe file.
How can I install it?
cm7 rom requires that u flash latest clockwork recover mod and then do the installation via it for further help u can fell free to pm me
el.duderino said:
Hi,
I installed android 2.2 (NAND) on my HD2 yesterday. I did this using MAGLDR first and then an unknown android 2.2 rom with a DAF.exe inside it. Now I want to update 2.2 to CyanogenMod 7 (2.2.3). But the CyanogenMod folder doesn't contain a DAF.exe file.
How can I install it?
Click to expand...
Click to collapse
Here you go-
http://forum.xda-developers.com/showthread.php?t=987531
Flash desired CWM and then follow instructions from your ROM thread.
I prefer SD-files recovery version ;-)
Thanks
HELP
Hi guys,
I have a big problem. I want to install this ROM on my HD2, but if i download this file i cant find the DAF.exe so how do I install it now? I already installed HardSPL 2.0.HSPL and I can enter the bootloader screen from MAGLDR. But if i do USB Flasher what must i do on the PC then i only downloaded some mapping with files in it but no .exe files or something like that. Hopefully some1 can help me.
I confused realy hard
I found a old DAF.exe file on my PC but if i use that he install a old android rom i want a new one how do i fix this?
you have to flash clockworkmod in magldr. then you can flash the rom within cwm. i bet that this is explained in your rom thread. please read the stuff before you flash something.
Hi guys im so stupid i deleted my backup of my old 2.1 stock rom therefore i can't go back to it from cyanogen mod 7 can someone please provie me with the eclair rom for htc wildfire thank you remeber it has to be official rom thnaks again
http://shipped-roms.com/index.php?category=android&model=Buzz
Check ROMs with version number 1.x. These are Eclair ROMs.
hey 3xeno....iam on eclair and want to update to froyo...iam having that 60mb file which is an update from shipped rom in my lappie.....i don't want to download it as iam having mobile network and no wifi....so plz tell me any procedure to apply update to eclair....
i had tried that method of extracting firmware file from it deleting .nbo file and then zipping it into P49IMG.ZIP bt nothing happened...my device didn't updated...
iam s-off and evrything....any method done from command or nything....plz do tell me..
I read it somewhere, but, I am not sure whether it works or not. Here's the procedure in any case:
- Rename the 60MB OTA Zip to update.zip
- Reboot into HBoot
- Press Vol Up + Power. This will supposedly take you to the Stock HTC Recovery.
- Here, select Apply sdcard:update.zip. It will install the Zip automatically.
Alternatively, you can try this via Clockworkmod also. The procedure remains the same, but, you enter Clockworkmod > Install Zip from SDCard > Apply sdcard:update.zip
To reiterate, this is what I have read elsewhere, it's not tested by me personally.
they are all version 1.0
still cant find it !!!
Go for this one:
RUU_Buzz_HTC_WWE_1.37.405.1_Radio_13.53.55.24H_3.35.19.25_release_151892_signed.exe
Hi guys,
Was browsing through some android videos and had once come across a video on Rom Manager and how one needn't have to boot into CWM to flash ROMs etc.
Just wanted to ask, can I also install/flash zip files directly from ROM Manager Premium as well?
For example a certain transparent status bar theme requires me to boot into CWM and flash it, can I just use the ROM installer in ROM Mgr to install/flash such zip files?
newuxtreme said:
Hi guys,
Was browsing through some android videos and had once come across a video on Rom Manager and how one needn't have to boot into CWM to flash ROMs etc.
Just wanted to ask, can I also install/flash zip files directly from ROM Manager Premium as well?
For example a certain transparent status bar theme requires me to boot into CWM and flash it, can I just use the ROM installer in ROM Mgr to install/flash such zip files?
Click to expand...
Click to collapse
yes but the problem with this is that rom manager is not compatible with all devices and if you get a boot loop you cant get to rom manager. its only OK for roms you know for sure are 100% stable lol
i would hate to start from scratch with original OTA crap personally
Hello everyone!
So in these last couple of days I wanted to restore original ROM (Android 1.6) back from Cyanogenmod, but unfortunately I can't get any available stock ROM to work, installation of .zip s end up with "E: Unable to install............... .zip (bad)", the only one that worked so far was Cyanogenmod 7.2.0. Also I can't use any RUU to install ROM, because I'm using Linux, and RUU software doesn't work properly. I'm using Clockworkmod Recovery 5.0.2.0, my bootloader is unlocked and I have rooted phone. And I wanted to know if anyone has got original ROM's backup that would work for my recovery to reinstall original Android 1.6.
Thanks!
Have you tried to extract ROM zip file from ruu package installer?
https://github.com/kmdm/unruu/ (I've not tested)
Just found this thread that can help you: http://forum.xda-developers.com/showthread.php?t=711302 (untested too, I've retired my tattoo long time ago )
If you're trying to flash donut roms try to downgrade recovery (for which i can remember from old days, very old Rom uses amend scripting language for flashing instead of edify)
Bye
yen